Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “agent based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A novel targeted plugging and fracture‐adaptable gel used as a diverting agent in fracturing

Abstract Diverting agents that could plug a targeted location and fill different shapes of fractures have attracted an increasing attention in the field of fracturing. In this study, a series of novel diverting agents were prepared by mixing aldehyde sodium alginate (ASA) and amino gelatin (AG) through a Schiff base reaction to form a primary network, polylactic acid (PLA) fibers were added to produce a 3D network, and Ca 2+ was mixed in as an ionic cross‐linking agent to strengthen the cross‐linking points. It was found that gelation time, swelling behavior, and mechanical performance could be controlled by varying the content of aldehyde groups and amino groups. Gelation time could be controlled in 1‐10 minutes. Plugging behavior and degradation tests demonstrated that the hydrogel could suit fractures with various shapes and plug effectively under high temperatures and pressures, and it could eventually become acidic fluid to help clean the wellbore. This novel ASA/AG/PLA hydrogel constitutes a promising environmentally friendly diverting agent in the application of diversion fracturing.

Zhang, Yuyuan↗

Sylgard® Mixing Study

Sylgard® 184 and Sylgard® 186 silicone elastomers form Dow Corning® are used as potting agents across the Nuclear Weapons Complex. A standardized mixing procedure is required for filled versions of these products. The present study is a follow-up to a mixing study performed by MST-7 which established the best mixing procedure to use when adding filler to either 184 or 186 base resins. The most effective and consistent method of mixing resin and curing agent for three modified silicone elastomer recipes is outlined in this report. For each recipe, sample size, mixing type, and mixing time was varied over 10 separate runs. The results show that the THINKY™ Mixer gives reliable mixing over varying batch sizes and mixing times. Hand Mixing can give improved mixing, as indicated by reduced initial viscosity; however, this method is not consistent.

36 MATERIALS SCIENCE↗

Tailoring Biomimetic Phosphorylcholine-Containing Block Copolymers as Membrane-Targeting Cellular Rescue Agents

Some synthetic polymers can block cell death when applied following an injury that would otherwise kill the cell. This cellular rescue occurs through interactions of the polymers with cell membranes. However, general principles for designing synthetic polymers to ensure strong, but nondisruptive, cell membrane targeting are not fully elucidated. Here, we tailored biomimetic phosphorylcholine-containing block copolymers to interact with cell membranes and determined their efficacy in blocking neuronal death following oxygen-glucose deprivation. By adjusting the hydrophilicity and membrane affinity of poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC)-based triblock copolymers, the surface active regime in which the copolymers function effectively as membrane-targeting cellular rescue agents was determined. We identified nonintrusive interactions between the polymer and the cell membrane that alter the collective dynamics of the membrane by inducing rigidification without disrupting lipid packing or membrane thickness. Furthermore, our results open new avenues for biological applications of polyMPC-based polymers and provide an approach to designing membrane-targeting agents to block cell death after injury.

59 BASIC BIOLOGICAL SCIENCES↗

Structure, stability and function of 5-chlorouracil modified A:U and G:U base pairs

The thymine analog 5-chlorouridine, first reported in the 1950s as anti-tumor agent, is known as an effective mutagen, clastogen and toxicant as well as an effective inducer of sister-chromatid exchange. Recently, the first microorganism with a chemically different genome was reported; the selected Escherichia coli strain relies on the four building blocks 5-chloro-2'-deoxyuridine (ClU), A, C and G instead of the standard T, A, C, G alphabet [Marlière,P., Patrouix,J., Döring,V., Herdewijn,P., Tricot,S., Cruveiller,S., Bouzon,M. and Mutzel,R. (2011) Chemical evolution of a bacterium’s genome. Angew. Chem. Int. Ed., 50, 7109–7114]. The residual fraction of T in the DNA of adapted bacteria was <2% and the switch from T to ClU was accompanied by a massive number of mutations, including >1500 A to G or G to A transitions in a culture. The former is most likely due to wobble base pairing between ClU and G, which may be more common for ClU than T. To identify potential changes in the geometries of base pairs and duplexes as a result of replacement of T by ClU, we determined four crystal structures of a B-form DNA dodecamer duplex containing ClU:A or ClU:G base pairs. The structures reveal nearly identical geometries of these pairs compared with T:A or T:G, respectively, and no consequences for stability and cleavage by an endonuclease (EcoRI). The lack of significant changes in the geometry of ClU:A and ClU:G base pairs relative to the corresponding native pairs is consistent with the sustained unlimited self-reproduction of E. coli strains with virtually complete T→ClU genome substitution.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of B{sub 2}O{sub 3} on Crystallization, Structure, and Heat Transfer of CaO-Al{sub 2}O{sub 3}-Based Mold Fluxes

The reaction between traditional CaO-SiO{sub 2}-based mold fluxes and high-Al steel inevitably changes flux composition, and, consequently, flux properties. This problem can be mitigated by using CaO-Al{sub 2}O{sub 3}-based mold fluxes. To maintain appropriate melting properties, CaO-Al{sub 2}O{sub 3}-based mold fluxes contain B{sub 2}O{sub 3}, which is an effective fluxing agent that decreases the liquidus temperature. In this article, the effects of B{sub 2}O{sub 3} on crystallization behavior, structure, and heat transfer of CaO-Al{sub 2}O{sub 3}-based mold fluxes were studied using single/double hot thermocouple technique, Raman spectroscopy, and infrared emitter technique. The increase of B{sub 2}O{sub 3} content from 7.6 to 13.1 mass pct suppressed the crystallization tendency of mold fluxes in continuous cooling experiments and isothermal experiments conducted over 1273 K (1000 °C). The isothermal crystallization below 1273 K (1000 °C) was also inhibited when B{sub 2}O{sub 3} content increased from 7.6 to 9.6 mass pct; but a further increase of B{sub 2}O{sub 3} content to 13.1 mass pct did not show a visible effect on the crystallization tendency. The increase of B{sub 2}O{sub 3} content from 9.6 to 13.1 mass pct improved the heat fluxes under an incident thermal radiation of 1.6 MW/m{sup 2}; however, the increase of B{sub 2}O{sub 3} content from 7.6 to 9.6 mass pct slightly decreased the heat transfer rate. Crystallization of fluxes and heat transfer were discussed in relation to flux structure.

36 MATERIALS SCIENCE↗

Deep Multi-Agent Reinforcement Learning for Real-World Signalized Traffic Corridor Control

Signalized traffic control problem has been addressed recently with deep Reinforcement Learning (RL) approaches involving diverse state, action, and reward structures. While significant progress has been noted in the literature, open challenges still remain in the areas of adaptive signal phase timing, coordination in a multi-intersection corridor setting, and consideration of real-world traffic conditions. In the context of deep RL-based problem framing, extensions are needed that enable adaptive signal phase timings in an intersection agent's action space, computationally efficient information sharing among neighboring signalized intersection agents along a corridor, and experimentation in realistic simulation environments. In this paper, we develop a deep Advantage Actor Critic (A2C) multi-agent RL (MARL) approach capturing the research extensions above and apply it within a real-world calibrated Aimsun Next traffic corridor simulation model based on traffic data from the City of Coral Gables, Florida. For a multi-intersection corridor control setting, our numerical simulation experiments with a decentralized A2C MARL algorithm applied at different time periods led to a total average corridor travel delay reduction (expressed in seconds/mile averaged over vehicles) from 4.9% to 19.9% compared to state-of-the-art actuated control.

Shuvo, Salman S. [BATTELLE (PACIFIC NW LAB)]↗

Potential of high-Z contrast agents in clinical contrast-enhanced computed tomography

Purpose: Currently, only iodine- and barium-based contrast media (CM) are used in clinical contrast-enhanced computed tomography (CE-CT). High-Z metals would produce a higher contrast at equal mass density for the x-ray spectra used in clinical CT. Using such materials might allow for significant dose reductions in CE-CT. The purpose of this study was to quantify the potential for dose reduction when using CM based on heavy metals. Methods: The contrast-to-noise ratio weighted by dose (CNRD) was determined as a function of scan protocol by means of measurements and simulations on a clinical CT scanner. For simulations, water cylinders with diameters 160, 320, 480, and 640 mm were used to cover a broad range of patient sizes. Measurements were conducted with 160 and 320 mm water-equivalent plastic cylinders. A central bore of 13 mm diameter was present in all phantoms. The tube voltage was varied from 80 to 140 kV for measurements and from 60 to 180 kV for simulations. Additional tin filtration of thicknesses 0.4, 0.8, and 1.2 mm was applied in the simulation to evaluate a range of spectral hardness. The bore was filled with a mixture of water and 10 mg/ml of pure iodine, holmium, gadolinium, ytterbium, osmium, tungsten, gold, and bismuth for the simulations and with aqueous solutions of ytterbium, tungsten, gold, and bismuth salts as well as Iopromid containing 10 mg/ml of the pure materials for the measurements. CNRDs were compared to iodine at phantom size-dependent reference voltages for all high-Z materials and the resulting dose reduction was calculated for equal contrast-to-noise ratio. Results: Dose reduction potentials strongly depended on phantom size, spectral hardness, and tube voltage. Depending on the added filtration, a dose reduction of 19%-60% could be reached at 80 kV with gadolinium for the 160 mm phantom, 52%-69% at 100 kV with holmium for the 320 mm phantom, 62%-78% with 120 kV for hafnium and the 480 mm phantom and 74%-86% with 140 kV for gold and the 640 mm phantom. While gadolinium might be considered at 160 mm diameter, hafnium showed the best overall performance for phantom sizes of 320 mm and above. The measurements conducted on the clinical CT scanner showed very good agreement with simulations with deviations in the order of 5 to 10%. Conclusions: The results of this study encourage the development and use of CM based on high-Z materials, especially for adipose patients, where high tube voltages are necessary to reach sufficiently short scan times. Hafnium proved to be the best compromise for average-size and for adipose patients. Even higher-Z materials such as gold and bismuth showed a good overall performance in conjunction with high tube voltage, large patients or strong added filtration and may be recommended for scans under these conditions.

61 RADIATION PROTECTION AND DOSIMETRY↗

The Effect of Porosity and Grain Size on the Phase Composition and Mechanical Properties of Zirconium-Dioxide-Based Ceramic

ZrO{sub 2}(Y) ceramic with embedded particles of a pore-forming agent—ultrahigh molecular weight polyethylene—has been studied. It has been shown that the porosity of samples after sintering changed from 2 to 42 vol % and the grain size changed from 0.5 to 1.55 μm depending on sintering regime. The strength of materials with minimum porosity was 3000 ± 200 MPa, while the strength of materials with maximum porosity was 100 ± 20 MPa, regardless of grain size. It has been shown that the tetragonal to monoclinic martensitic phase transformation related to mechanical stresses takes place in the material without any effect on the macrostrength of the material. Internal microscopic stresses decreasing with an increase in porosity and ceramic grain size are the main factor causing this transformation in a porous material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a Lateral Flow Strip-Based Recombinase-Aided Amplification for Active Chlamydia psittaci Infection

Chlamydia psittaci is the causative agent of psittacosis, a worldwide zoonotic disease. A rapid, specific, and sensitive diagnostic assay would be benefit for C. psittaci infection control. In this study, an assay combining recombinase-aided amplification and a lateral flow strip (RAA-LF) for the detection of active C. psittaci infection was developed. The RAA-LF assay targeted the CPSIT_RS02830 gene of C. psittaci and could be accomplished in 15 min at a single temperature (39°C). The analytical sensitivity of the assay was as low as 1 × 10 0 copies/μl and no cross-reaction with some other intracellular pathogens was observed. Moreover, all feces samples from mice infected with C. psittaci at day-1 post-infection were positive in the RAA-LF assay. In conclusion, the RAA-LF assay provides a convenient, rapid, specific and sensitive method for detection of active C. psittaci infection and it is also suitable for C. psittaci detection in field.

Jiao, Jun↗

The detrimental effect of flux-induced boron alloying in Pd–Si–Cu bulk metallic glasses

We report on advanced insights into the fluxing of Pd–Si–Cu bulk metallic glasses. Flux-induced boron alloying and trapping of oxides are found to be associated with the employed boron oxide fluxing agent, and both influence the attainable glass-forming ability (GFA) in opposite ways. Incorporated boron strongly deteriorates the GFA due to a rising liquidus temperature, while the oxygen reduction improves it. Thus, proper fine-tuning of the fluxing time and overheating characteristics leads to an enhancement of GFA. In the current case, the critical diameter of Pd{sub 77.5}Si{sub 16.5}Cu{sub 6} bulk metallic glasses can be increased to 15 mm, as compared to 3 mm in the unfluxed case. Based on these results, we illustrate that the development of further fluxing agents is crucial for enhancement of the key properties of bulk metallic glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metabolic alterations in bladder cancer: applications for cancer imaging

Treatment planning, outcome and prognosis are strongly related to the adequate tumor staging for bladder cancer (BC). Unfortunately, a large discrepancy exists between the preoperative clinical and final pathologic staging. Therefore, an advanced imaging-based technique is crucial for adequate staging. Although Magnetic Resonance Imaging (MRI) is currently the best in vivo imaging technique for BC staging because of its excellent soft-tissue contrast and absence of ionizing radiation it lacks cancer-specificity. Tumor-specific positron emission tomography (PET), which is based on the Warburg effect (preferential uptake of glucose by cancer cells), exploits the radioactively–labeled glucose analogs, i.e., FDG. Although FDG-PET is highly cancer specific, it lacks resolution and contrast quality comparable with MRI. Chemical Exchange Saturation Transfer (CEST) MRI enables the detection of low concentrations of metabolites containing protons. BC is an attractive target for glucose CEST MRI because, in addition to the typical systemic administration, glucose might also be directly applied into the bladder to reduce toxicity-related complications. As a first stage of the development of a contrast-specific BC imaging technique we have studied glucose uptake by bladder epithelial cells and have observed that glucose is, indeed, consumed by BC cells with higher intensity than by non-transformed urothelial cells. This effect might be partly explained by increased expression of glucose transporters GLUT1 and GLUT3 in transformed cells as compared to normal urothelium. We also detected higher lactate production by BC cells which is another cancer-specific manifestation of the Warburg effect. In addition, we have observed other metabolic alterations in BC cells as compared to non-transformed cells: in particular, increased pyruvate synthesis. When glucose was substituted by glutamine in culture media, preferential uptake of glutamine by BC cells was observed. The preferential uptake of glucose by BC cells gives an opportunity to develop NMR based imaging procedures where glucose or its derivatives can serve as a contrasting agent. In addition, metabolic alterations observed in BC cells could provide the basis for development of new anti-cancer therapeutics.

60 APPLIED LIFE SCIENCES↗

Succinic acid-based leaching system: A sustainable process for recovery of valuable metals from spent Li-ion batteries

A hydrometallurgical method involving natural organic acid leaching has been developed for recovery of lithium and cobalt from the cathode active materials in spent lithium-ion batteries. Succinic acid is employed as leaching agent and H2O2 as reductant. The cobalt and lithium contents from the succinic acid-based treatment of spent batteries are determined by inductively coupled plasma-optical emission spectroscopy to calculate the leaching efficiency. The spent LiCoO2 samples after calcination and the residues after leaching are characterized by X-ray diffraction and scanning electron microscopy. The results show that nearly 100% of cobalt and more than 96% of lithium are leached under optimal conditions: succinic acid concentration of 1.5 mol L-1, H2O2 content of 4 vol.%, solid-to-liquid ratio of 15 g L-1, temperature of 70 °C, and reaction time of 40 min. Results are also given for fitting of the experimental data to acid leaching kinetic models.

25 ENERGY STORAGE↗

Poisoning of a silica supported cobalt catalyst due to the presence of sulfur impurities in syngas during Fischer-Tropsch synthesis: Effect of chelating agent

Sulfur compounds that are generally found in syngas derived from coal and biomass are a poison to Fischer-Tropsch (FT) catalysts. The presence of sulfur impurities in the ppm range can limit the life of a FT catalyst to a few hours or a few days. In this study, FT synthesis was carried out in a fixed-bed reactor at 230 °C, 20 bar, and 13,500 Ncm3/h/gcat for 72 h using syngas with H2/CO = 2.0. Cobalt-based catalysts were subjected to poisoning by 10 and 50 ppm sulfur in the syngas. The performance of FT catalyst was compared in context of syngas conversion, product selectivities and yields, during the poisoning as well as post-poisoning stages. At both the impurity concentrations, the sulfur was noted to cause permanent loss in the activity, possibly by adsorbing irreversibly on the surface. The sulfur poison affects the hydrogenation and the chain-propagation ability of the catalysts, and shifts the product selectivity towards short-chain hydrocarbons with higher percentages of olefins. Additional diffusion limitations caused due to sulfur poisoning are thought to alter the product selectivity. The shifts in product selectivities suggest that the sulfur decreases the ability of the catalyst to form C-C bonds to produce longer-chain hydrocarbons. The selective blocking of sulfur is thought to affect the hydrogenation ability on the catalyst, resulting in more olefins in the product after sulfur poisoning. The sulfur poisoning on the cobalt catalyst is expected to cause an increase in the number of sites responsible for WGS or to influence the Boudouard reaction, resulting in a higher CO2 selectivity. Both the sites responsible for CO adsorptions as well as the sites for chain growth are poisoned during the poisoning. Additionally, the performance of a base-case cobalt catalyst is compared with that of catalysts modified by chelating agents (CAs). The superior performance of CA-modified catalysts during sulfur poisoning is attributed to the presence of smaller crystallite sizes and higher dispersions of cobalt on the support. Finally, the sulfur deactivation data is modeled by a simple kinetic expression to determine the deactivation constant, deactivation rates and half-life of the FT catalyst.

99 GENERAL AND MISCELLANEOUS↗

One-step facile synthesis of noble metal nanocrystals with tunable morphology in a nematic liquid crystalline medium

The present study describes in-situ synthesis of noble metal nano structures (MNCs) (Au and Ag) within a nematic liquid crystalline medium MBBA [N-(4-methoxybenzylidene)-4-butylaniline] without using any seed mediated growth protocol or without using any external stabilizing or reducing agent. Detailed Transmission Electron Microscopy (TEM) study indicates that apart from Kinetic based mechanism, the thermodynamical parameters also influence greatly the morphological evolution of these MNCs. The MNCs are of diverse shapes including nano prisms, hexagons, urchins, cubes, and rods which depend on the time of reaction and the choice of nanoparticle precursor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distributed Sensor Coordination for Advanced Energy Systems

The ability to collect key system level information is critical to the safe, efficient and reliable operation of advanced energy systems. With recent advances in sensor development, it is now possible to push some level of decision making directly to computationally sophisticated sensors, rather than wait for data to arrive to a massive centralized location before a decision is made. This type of approach relies on networked sensors (called “agents” from here on) to actively collect and process data, and provide key control decisions to significantly improve both the quality/relevance of the collected data and the associating decision making. The technological bottlenecks for such sensor networks stem from a lack of mathematics and algorithms to manage the systems, rather than difficulties associated with building and deploying them. Indeed, traditional sensor coordination strategies do not provide adequate solutions for this problem. Passive data collection methods (e.g., large sensor webs) can scale to large systems, but are generally not suited to highly dynamic environments, such as advanced energy systems, where crucial decisions may need to be reached quickly and locally. Approaches based on local decisions on the other hand cannot guarantee that each agent performing its task (maximize an agent objective) will lead to good network wide solution (maximize a network objective) without invoking cumbersome coordination routines. There is currently a lack of algorithms that will enable self-organization and blend the efficiency of local decision making with the system level guarantees of global decision making, particularly when the systems operate in dynamic and stochastic environments. In this work we addressed this critical gap and provided a comprehensive solution to the problem of sensor coordination to ensure the safe, reliable, and robust operation of advanced energy systems. The differentiating aspect of the proposed work is in shifting the focus towards “what to observe” rather than “how to observe” in large sensor networks, allowing the agents to actively determine both the structure of the network and the relevance of the information they are seeking to collect. In addition to providing an implicit coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Outcome Summary: All milestones associated with this project have been completed. In particular, private sensor objective functions were developed which are aligned with the global objective function, sensor effectiveness has been improved by using “sensor teams,” system efficiency has been improved by 30% using difference evaluation functions, we have demonstrated system reconfigurability for 20% changes in system conditions, we have demonstrated extreme scalability of our proposed algorithm, we have demonstrated that sensor networks can overcome disruptions of up to 20% in network conditions, and have demonstrated system reconfigurability to 20% changes in system conditions in hardware-based simulations. This final report summarizes how each of these milestones was achieved, and gives insight into future research possibilities past the work which has been completed. The following publications support these milestones [6, 8, 9, 10, 16, 18, 19].

97 MATHEMATICS AND COMPUTING↗

WE-G-BRA-02: SafetyNet: Automating Radiotherapy QA with An Event Driven Framework

Purpose: Quality assurance is an essential task in radiotherapy that often requires many manual tasks. We investigate the use of an event driven framework in conjunction with software agents to automate QA and eliminate wait times. Methods: An in house developed subscription-publication service, EventNet, was added to the Aria OIS to be a message broker for critical events occurring in the OIS and software agents. Software agents operate without user intervention and perform critical QA steps. The results of the QA are documented and the resulting event is generated and passed back to EventNet. Users can subscribe to those events and receive messages based on custom filters designed to send passing or failing results to physicists or dosimetrists. Agents were developed to expedite the following QA tasks: Plan Revision, Plan 2nd Check, SRS Winston-Lutz isocenter, Treatment History Audit, Treatment Machine Configuration. Results: Plan approval in the Aria OIS was used as the event trigger for plan revision QA and Plan 2nd check agents. The agents pulled the plan data, executed the prescribed QA, stored the results and updated EventNet for publication. The Winston Lutz agent reduced QA time from 20 minutes to 4 minutes and provided a more accurate quantitative estimate of radiation isocenter. The Treatment Machine Configuration agent automatically reports any changes to the Treatment machine or HDR unit configuration. The agents are reliable, act immediately, and execute each task identically every time. Conclusion: An event driven framework has inverted the data chase in our radiotherapy QA process. Rather than have dosimetrists and physicists push data to QA software and pull results back into the OIS, the software agents perform these steps immediately upon receiving the sentinel events from EventNet. Mr Keranen is an employee of Varian Medical Systems. Dr. Moran’s institution receives research support for her effort for a linear accelerator QA project from Varian Medical Systems. Other quality projects involving her effort are funded by Blue Cross Blue Shield of Michigan, Breast Cancer Research Foundation, and the NIH.

60 APPLIED LIFE SCIENCES↗

Mechanisms of Degradation of Toxic Nerve Agents: Quantum-chemical Insight into Interactions of Sarin and Soman with Molybdenum Dioxide

With the urgent need to provide an efficient and reliable protection for people from fatal chemical and biological weapons, our fundamental understanding of how toxins interact with filters is far from complete. The situation is further complicated by natural difficulties of performing experimental measurements with lethal toxins. Unlike experiments, computational modeling offers an attractive and safe yet reliable way of studying behavior of toxic agents on a variety of substrates at a great level of detail. Here, we report DFT-based quantum-chemical calculations of adsorption and decomposition of DMMP, sarin and soman on MoO 2 (011) surface. Our calculations show that MoO 2 strongly adsorbs toxic nerve agents and quickly decomposes them. Decomposition of DMMP on the MoO 2 (011) surface proceeds via the PO-CH 3 bond breaking and a formation of a surface methoxy group. The calculated activation barrier for this reaction is 131.5 kJ mol -1 . Unlike DMMP, decomposition of sarin and soman proceeds via the dealkylation reaction yielding propene and 3,3-dimethyl-1-butene, respectively. Decomposition of sarin requires a remarkably low energy (53.7 kJ mol- 1 ), whereas the similar reaction in soman requires 50 kJ mol -1 more energy. We also make specific predictions to guide Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) experiments on sarin interaction with MoO 2 samples. We conclude that MoO 2 serves as an efficient substrate able of degrading toxins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗