Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interplay Between Stereochemically Active Lone Pair Repulsions, Sigma Hole Interactions, and Delocalized Redox Processes in Topochemical Fluoride‐Ion Insertion

Topochemical insertion/extraction of cations has emerged as a generalizable strategy for modulating the crystal and electronic structure of periodic solids. In contrast, strategies for topochemical anion insertion are poorly explored and fundamental principles for designing insertion hosts to accommodate anions remain scarce. Here, we observe reversible room-temperature fluoride-ion insertion within tunnels of Sn 2 TiO 4 defined by the stereochemical expression of Sn 5 s 2 lone pairs. X-ray scattering studies of fluoride-ion-insertion-induced crystal structure modulation and X-ray absorption/emission spectroscopy probes of electronic structure along with magnetic susceptibility measurements and first-principles calculations are used to decipher design principles underpinning reversible fluoride-ion insertion and bulk diffusion. Fluoride-ion insertion is enabled by a combination of a large, polarizable tunnel, delocalized redox at Ti─O─Sn centers, inherent repulsion between the fluoride-ion and Sn 5 s 2 electron lone pairs, and the formation of dative interactions between Sn-centered σ-holes and fluoride-ions, yielding a reversible capacity of 0.5 fluoride-ions per Sn 2 TiO 4 formula unit. Our results demonstrate that the complex interplay between dative interactions and stereochemically active lone pair repulsions is critical to defining the thermodynamics and kinetics controlling fluoride-ion insertion and diffusion. As such, the design of fluoride-ion insertion hosts for anion batteries requires site-selective modification to modulate lattice—ion interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Abstract Extensive efforts have been made to improve the Li‐ionic conductivity of solid electrolytes (SE) for developing promising all‐solid‐state Li‐based batteries (ASSB). Recent studies suggest that minimizing the existing interface problems is even more important than maximizing the conductivity of SE. Interfaces are essential in ASSB, and their properties significantly influence the battery performance. Interface problems, arising from both physical and (electro)chemical material properties, can significantly inhibit the transport of electrons and Li‐ions in ASSB. Consequently, interface problems may result in interlayer formation, high impedances, immobilization of moveable Li‐ions, loss of active host sites available to accommodate Li‐ions, and Li‐dendrite formation, all causing significant storage capacity losses and ultimately battery failures. The characteristic differences of interfaces between liquid‐ and solid‐type Li‐based batteries are presented here. Interface types, interlayer origin, physical and chemical structures, properties, time evolution, complex interrelations between various factors, and promising interfacial tailoring approaches are reviewed. Furthermore, recent advances in the interface‐sensitive or depth‐resolved analytical tools that can provide mechanistic insights into the interlayer formation and strategies to tailor the interlayer formation, composition, and properties are discussed.

25 ENERGY STORAGE↗
DOE OSTI2022

Solid state NMR Investigation of Structural Differences in Pelletized DEB Samples

Upon hydrogenation of DEB pellets, which are composed of 75% virgin DEB and 25% of nanometer scale Pd catalysts on activated carbon, the uptake rate is strong, and the hydrogenation process is fast. However, the last batch of DEB pellets from KCNSC uptakes 10 times slower than traditional DEB pellets after ~ 50% consumption. In addition, the last batch of DEB getter pellets also became partially molten/wet during the hydrogenation process. This molten/wet phase during hydrogenation has only been observed with DPB and never with DEB formulation. DRIFT (diffuse reflection infrared Fourier transform) and XRD (x-ray diffraction) confirm that the questionable batch of DEB pellets from KCNSC are truly 100% DEB and not a mixture of DEB and DPB. So, there must be something different in the composition (like concentration and distribution of Pd) or interaction between the DEB molecules with the surrounding environment (activated carbon spreading medium). The possibility of some chemical contamination in the processing of this batch of questionable DEB getter pellets also comes to mind. Due to the ability of NMR to detect intermolecular interaction and sensitivity to small chemical concentration, NMR investigation was requested for this questionable batch of DEB getter pellets from KCNSC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Superb Perovskite Oxide Electrocatalysts: Engineering of Coupled Nanocomposites

Abstract A significant issue that bedeviled the commercialization of renewable energy technologies, ranging from low‐temperature water electrolyzers to high‐temperature solid oxide cells, is the lack of high‐performance catalysts. Among various candidates that could tackle such a challenge, perovskite oxides are rising‐star materials because of their unique structural and compositional flexibility. However, single‐phase perovskite oxides are challenging to satisfy all the requirements of electrocatalysts concurrently for practical applications, such as high catalytic activity, excellent stability, good ionic and electronic conductivities, and superior chemical/thermo‐mechanical robustness. Impressively, perovskite oxides with coupled nanocomposites are emerging as a novel form offering multifunctionality due to their intrinsic features, including infinite interfaces with solid interaction, tunable compositions, flexible configurations, and maximum synergistic effects between assorted components. Considering this new configuration has attracted great attention owing to its promising performances in various energy‐related applications, this review timely summarizes the leading‐edge development of perovskite oxide‐based coupled nanocomposites. Their state‐of‐art synthetic strategies are surveyed and highlighted, their unique structural advantages are highlighted and illustrated through the typical oxygen reduction reaction and oxygen evolution reactions in both high and low‐temperature applications. Opinions on the current critical scientific issues and opportunities in this burgeoning research field are all provided.

08 HYDROGEN↗
DOE OSTI2023

Young but fading radio sources: searching for remnants among compact steep-spectrum radio sources

The incidence of young but fading radio sources provides important information on the life cycle of radio emission in radio-loud active galactic nuclei. Despite its importance for constraining the models of radio source evolution, there are no systematic studies of remnants in complete samples of young radio sources. We report results of the study of 18 compact steep-spectrum (CSS) radio sources, selected from the statistically complete B3-VLA (Very Large Array) CSS sample, characterized by a steep optically thin spectrum (α ≥ 1.0) and no core detection in earlier studies. Our deep multifrequency VLA, pc-scale Very Long Baseline Array, and enhanced Multi Element Remotely Linked Interferometer Network (e-MERLIN) observations allowed us to locate the core component in 10 objects. In three CSS sources, there is no clear evidence of present-time active regions, suggesting that they are likely in a remnant phase. Among sources with core detection, we find three objects that have no clear active regions (hotspots) at the edges of the radio structure, suggesting that the radio emission may have just restarted. Our results support a power-law distribution of the source ages, although the poor statistics prevents us from setting solid constraints on the percentage of remnants and restarted sources in subpopulations of radio sources.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Two‐Color Amplified Spontaneous Emission from Auger‐Suppressed Quantum Dots in Liquids

Abstract Colloidal quantum‐dot (QD) lasing is normally achieved in close‐packed solid‐state films, as a high QD volume fraction is required for stimulated emission to outcompete fast Auger decay of optical‐gain‐active multiexciton states. Here a new type of liquid optical‐gain medium is demonstrated, in which compact compositionally‐graded QDs (ccg‐QDs) that feature strong suppression of Auger decay are liquefied using a small amount of solvent. Transient absorption measurements of ccg‐QD liquid suspensions reveal broad‐band optical gain spanning a wide spectral range from 560 (green) to 675 nm (red). The gain magnitude is sufficient to realize a two‐color amplified spontaneous emission (ASE) at 637 and 594 nm due to the band‐edge (1S) and the excited‐state (1P) transition, respectively. Importantly, the ASE regime is achieved using quasicontinuous excitation with nanosecond pulses. Furthermore, the ASE is highly stable under prolonged excitation, which stands in contrast to traditional dyes that exhibit strong degradation under identical excitation conditions. These observations point toward a considerable potential of high‐density ccg‐QD suspensions as liquid, dye‐like optical gain media that feature readily achievable spectral tunability and stable operation under intense photoexcitation.

Li, Xueyang↗
DOE OSTI2022

From Copper to Basic Copper Carbonate: A Reversible Conversion Cathode in Aqueous Anion Batteries

Abstract Dual‐ion batteries that use anions and cations as charge carriers represent a promising energy‐storage technology. However, an uncharted area is to explore transition metals as electrodes to host carbonate in conversion reactions. Here we report the reversible conversion reaction from copper to Cu 2 CO 3 (OH) 2 , where the copper electrode comprising K 2 CO 3 and KOH solid is self‐sufficient with anion‐charge carriers. This electrode dissociates and associates K + ions during battery charge and discharge. The copper active mass and the anion‐bearing cathode exhibit a reversible capacity of 664 mAh g −1 and 299 mAh g −1 , respectively, and relatively stable cycling in a saturated mixture electrolyte of K 2 CO 3 and KOH. The results open an avenue to use carbonate as a charge carrier for batteries to serve for the consumption and storage of CO 2 .

Gallagher, Trenton C.↗
DOE OSTI2025

Surface Protected Organozirconium Catalyzes C─H Alumination of Saturated Hydrocarbons

Surface grafted organozirconium catalyzes C─H/Et─Al exchange reactions, involving saturated hydrocarbons and AlEt 3 , to afford organoaluminum compounds and ethane. The Zr(O t Bu) 3 @SiO 2 -Al 2 O 3 –700 (1) catalyst contains monopodal ≡SiO─Zr(O t Bu) 3 and only a few residual silanols (<5%). Nonetheless, these silanols are the Achille's heel of 1, providing a pathway for surface and catalyst degradation during catalysis, limiting the alkylaluminum yield and catalyst turnover. Support degradation, involving the cleavage of Si─O bonds by activated surface organometallics, is inhibited by capping silanols with ─SiMe 3 . Residual silanols in 1 react with allyltrimethylsilane, as determined by solid-state 13 C and 29 Si nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, and reaction stoichiometry, to form Zr(O t Bu) 3 /SiMe 3 @SiO 2 -Al 2 O 3–700 (2), which is resistant to degradation by AlEt 3 . C─H alumination of dodecane catalyzed by 2 produces higher yields of the 1-dodecylaluminum product in comparison to 1, and in >95% selectivity. Additionally, methane undergoes 2-catalyzed C─H alumination, providing a route to AlMe 3 .

Banerjee, Sayak [Iowa State Univ., Ames, IA (Unite↗
DOE OSTI2020

Cisplatin-Induced Alteration on Membrane Composition of A549 Cells Revealed by ToF-SIMS

Cisplatin has been clinically used for treatment of solid tumors such as non-small-cell lung cancer for decades. However, tumor resistance may be acquired with losing the antitumor activity of cisplatin. As cellular membrane is the first barrier that cisplatin has to overcome before its further action inside the cells, the membrane composition must play a vital role in the cisplatin uptake and excretion which further influences cisplatin sensitivity. In this work, we applied ToF-SIMS surface analysis combined with principle component analysis to distinguish the differences of cell membrane composition between non-small-cell lung cancer cells (A549) and its cisplatin resistant counterpart A549/DDP cells. The decreased phosphatidylcholine content and more abundant cholesterol were observed in the drug resistant cell surfaces, indicating the decreased membrane fluidity of A549/DDP cells. Moreover, we further compared membrane composition of A549 and A549/DDP cells after being treated with different concentrations of cisplatin. A higher composition level of proteins was discovered on all groups of A549/DDP cell membranes. The altered surface chemistry of cellular membranes induced by cisplatin indicate the significance of membrane structures in the drug resistance, which deserves further investigations to this regard.

Zhang, Yanyan↗
DOE OSTI2020

Hydroxylation and Cation Segregation in (La 0.5 Sr 0.5 )FeO 3-$δ$ Electrodes

Simultaneously achieving high activity and stability is the primary challenge when engineering (electro)catalysts. Transition metal perovskite oxides are employed as air electrodes for solid-oxide fuel cells and electrolyzers. However, degradation of oxygen exchange kinetics at the solid–gas interface, often linked to alkaline-earth cation segregation and precipitation, limits widespread commercialization. Here, we systematically investigated the surface degradation mechanism induced by gas-phase impurities in La 0.5 Sr 0.5 )FeO 3-$δ$ (LSF55) thin-film electrodes by varying the concentration of H 2 O, SO 2 , and CO 2 . Degradation of the area-specific resistance in ambient and humidified synthetic air is significantly greater than in dry ambient and dry synthetic air, pointing to the importance of water vapor. Time-resolved, in situ ambient pressure X-ray photoelectron spectroscopy performed in O 2 showed that nonbulk Sr is present on the surface before the exposure to water vapor. Upon introduction of water vapor, neither additional Sr segregation nor precipitation driven by water vapor is a necessary condition for degradation. Rather, hydroxylation of the surface induces irreversible and significant degradation. At the same time, we show that Sr migration driven by water vapor is partially reversible. These fundamental insights can be used for the rational design of electrodes with improved catalytic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Activity of Silica-Alumina for the Conversion of Polyethylene into Tunable Aromatics Below Pyrolytic Temperatures

Plastic waste is a mounting problem that lacks global strategy, largely due to inadequate recycling capabilities. One alternative gaining traction in the heterogeneous catalysis community is the upcycling of polyolefins into value-added products, such as hydrogen-free conversion to alkylaromatic compounds over Pt/Al 2 O 3 . Here, we examined the activity of nominally metal-free, mesoporous silica-alumina mixed oxide materials (SiO 2 –Al 2 O 3 ) for the conversion of polyethylene into aromatic compounds at temperatures of and below 280 °C. Yields with the silica-alumina catalysts are comparable to those obtained over Pt(1 wt %)/Al 2 O 3 under identical conditions, and product selectivity can be tuned by altering reaction conditions or the acid site density of the SiO 2 –Al 2 O 3 . Notably, the fraction of polyaromatic products increases with the Brønsted acid site density of the catalyst, as does the degree of polymer deconstruction. These catalysts can be reused without regeneration, and their activity improves with each recycling event, producing soluble product yields up to 83%. Preliminary work on the mechanism of the reaction suggests that acid sites are responsible for initiating depolymerization and aromatization reactions, in analogy to previous work in the literature. Finally, this work showcases the activity of SiO 2 –Al 2 O 3 for polyolefin deconstruction/aromatization at subpyrolytic temperatures and lays the foundation for future studies involving solid acid and bifunctional catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural adaptation of fungal cell wall in hypersaline environment

Abstract Halophilic fungi thrive in hypersaline habitats and face a range of extreme conditions. These fungal species have gained considerable attention due to their potential applications in harsh industrial processes, such as bioremediation and fermentation under unfavorable conditions of hypersalinity, low water activity, and extreme pH. However, the role of the cell wall in surviving these environmental conditions remains unclear. Here we employ solid-state NMR spectroscopy to compare the cell wall architecture of Aspergillus sydowii across salinity gradients. Analyses of intact cells reveal that A. sydowii cell walls contain a rigid core comprising chitin, β-glucan, and chitosan, shielded by a surface shell composed of galactomannan and galactosaminogalactan. When exposed to hypersaline conditions, A. sydowii enhances chitin biosynthesis and incorporates α-glucan to create thick, stiff, and hydrophobic cell walls. Such structural rearrangements enable the fungus to adapt to both hypersaline and salt-deprived conditions, providing a robust mechanism for withstanding external stress. These molecular principles can aid in the optimization of halophilic strains for biotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Isotopic fractionation as in-situ sensor of subsurface reactive flow and precursor for rock failure

Greater utilization of subsurface reservoirs perturbs in-situ chemical-mechanical conditions with wide ranging consequences from decreased performance to project failure. Understanding the chemical precursors to rock deformation is critical to reducing the risks of these activities. To address this need, we investigated the coupled flow-dissolution- precipitation-adsorption reactions involving calcite and environmentally-relevant solid phases. Experimentally, we quantified (1) stable isotope fractionation processes for strontium during calcite nucleation and growth, and during reactive fluid flow; (2) consolidation behavior of calcite assemblages in the common brines. Numerically, we quantified water weakening of calcite using molecular dynamics simulations; and quantified the impact of calcite dissolution rate on macroscopic fracturing using finite element models. With microfluidic experiments and modeling, we show the effect of local flow fields on the dissolution kinetics of calcite. Taken together across a wide range of scales and methods, our studies allow us to separate the effects of reaction, flow, and transport, on calcite fracturing and the evolution of strontium isotopic signatures in the reactive fluids.

42 ENGINEERING↗
DOE OSTI2023

Modeling of Chemical Slurry Rheology in DWPF Sludge Batch (SB) 10 Simulants

The Defense Waste Processing Facility (DWPF) treats high-activity radionuclides from sludge through a process called vitrification. This process converts radioactive liquid waste currently stored in tank farms into a solid glass form that is suitable for long-term storage and disposal. Due to the complexities involved in vitrifying this waste within each operation of the Chemical Processing Cell (CPC), waste rheology is studied to characterize the fluid-mechanical properties as it passes through the CPC and into the Melter. To better understand the waste and validate flow behavior, slurry rheology of simulants that represents the waste was studied at various acid stoichiometry percentages and solids concentrations to determine the simulant’s yield stress and viscosity. This research work has been supported by the DOE-FIU Science & Technology Workforce Development Initiative, an innovative program developed by the U.S. Department of Energy’s Office of Environmental Management (DOE-EM) and Florida International University’s Applied Research Center (FIU-ARC). During the spring of 2022, a DOE Fellow intern, Brendon Cintas, spent 10 weeks doing a summer internship at Savannah River National Laboratory (SRS) under the supervision and guidance of Dan Lambert, Chemical Flowsheet Development. The intern’s project was initiated on June 6, 2022, and continued through August 11, 2022 with the objective of assisting scientists at SRNL’s Rheology and Grout Laboratory at Aiken Country Technology Lab (ACTL) better understand the sludge composition on the rheology of a simulant slurry using a HAAKE RheoStress 6000 rheometer and extrapolate the results to the real-waste data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Full Scale HEPA Filter Encapsulation in Ultra-High-Performance Grout - Proof of Concept

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) currently being constructed to treat radioactive waste, includes vitrification facilities for both the high-level waste (HLW) and low activity waste (LAW) fractions. Operation of the WTP will produce contaminated high-efficiency particulate air filters (HEPA), as part of the solid secondary waste (SSW) stream. The HEPA filters receive off-gas from the vessel vent header and primary off-gas treatment system in LAW Facility and remove particulate contaminants including 99 Tc and 129 I salts. The current disposal method for HEPA filters is encapsulation in metal containers using cementitious material (CM) and disposal in the Integrated Disposal Facility (IDF). Results from the 2017 IDF Performance Assessment (PA) WRPS (2018) demonstrated that while compliance is maintained for the 1000 year compliance period mandated by DOE O 435.1 and its accompanying manual, release of constituents from the HEPA filters result in exceedance of the performance objective imposed as the groundwater regulatory limit at later times. For example, at about 1500 years post-closure, solid secondary waste (SSW), including HEPA filters is predicted to become a dominant contributor to 99 Tc release and over the 10,000-year sensitivity analysis period, SSW is the dominant contributor of 129 I release to the groundwater. The estimated release could potentially be reduced if the HEPA filters are not compacted and waste containers could be distributed throughout a large space, thereby diluting the contaminant release. Additionally, a better cementitious material could be used to encapsulate the HEPA filters. One alternative method for disposal of contaminated HEPA filters is encapsulation of the filters in ultra high-performance grout (UHPG). UHPG is a variation of ultra-high-performance concrete (UHPC) is commonly used in the prestressed concrete industry for large structural members. Recent studies of UHPG show it has excellent properties for containing radionuclides such as 99 Tc and 129 I Nichols and Kaplan (2021). This report presents the results of the first attempt to encapsulate a clean, full-size HEPA filter in UHPG and evaluate the effectiveness of the immobilization process and final waste form. A full-scale proof-of-concept simulated waste form was prepared by encapsulating a HEPA filter in a 110-gallon stainless steel (SS) drum using UHPG. A change from Type I/II PC to Type 1L PLC was made after American Rock Products informed the team that they would no longer be using Type I/II by the end of 2024 and the northwest was phasing out Type I/II PC overall. Type I/II PC used in previous studies of UHPG for encapsulation (Nichols and Kaplan 2021). After the UHPG was cured both the scaled mockup and the full-scale simulated waste forms were sectioned for visual examination. UHPG completely encapsulated the filters and bonded to the external surfaces of materials comprising the filters. No cracks were observed in the sectioned waste forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Solid State Transformer Architecture and Control Compensation for Common Mode Currents

A high-altitude electromagnetic pulse (HEMP) or similar geomagnetic disturbance (GMD) has the potential to impact the operation of large-scale electric power grids. By introducing low-frequency common-mode (CM) currents, these events can degrade the performance of critical system components, such as large power transformers by introducing CM currents which can lead to magnetic saturation of the transformer core. In this work, a solid-state transformer (SST) is developed to replace susceptible equipment and improve grid resiliency by safely absorbing these CM disturbances. This device will be referred to as a common-mode solid-state transformer (CM-SST). An SST architecture based on a four-legged AC/DC converter is developed. This architecture enables active control of CM signals without disturbing the AC voltages or the real and reactive power delivery capabilities. A system-level model of this architecture is created, and time-domain simulations are performed to evaluate the SST’s performance in response to simulated CM disturbances. A control strategy for mitigating CM current is also investigated. Hamiltonian surface shaping and power flow control (HSSPFC) is used to design a nonlinear controller for the SST’s output inverter. The objectives of the controller are to suppress CM-induced AC current offsets and regulate AC currents to desired setpoints. Nonlinear system analysis is applied to design and validate the controller. Two cases are tested: (a) the proposed four-leg inverter and (b) a standard three-leg inverter. The results show that the proposed controller rapidly mitigates CM disturbances while maintaining high-quality AC current waveforms in the four-leg configuration. Finally, the hardware performance of an SST prototype is evaluated. In particular, the ability of the SST to safely redirect and absorb CM currents is demonstrated, showing how it can protect neighboring conventional transformers in the system. The study confirms that appropriate control laws allow the SST to protect both itself and adjacent transformers during a HEMP or GMD event.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1974

Natural environment support guidelines for space shuttle tests and operations

All space shuttle events from launch through solid rocket booster recovery and orbiter landing are considered in terms of constraints placed on those operations by the natural environment. Thunderstorm activity is discussed as an example of a possible hazard. The activities most likely to require advanced detection and monitoring techniques are identified as those from deorbit decision to Orbiter landing. The inflexible flight plan will require the transmission of real time wind profile information below 24 km and warnings of thunderstorms or turbulence in the Orbiter flight path. Extensive aerial reconnaissance and communication facilities and procedures to permit immediate transmission of aircraft reports to the mission control authority and to the Orbiter will also be required.

Carter, E. A.↗
NASA NTRS1976

The making of the atmosphere

A model for the evolution of the earth's atmosphere is proposed in which the atmosphere and oceans are assumed to have accumulated as a result of volatile outgassing from the earth's interior. The bulk of the outgassed volatiles were originally trapped within the solid earth during the planetary accretion process, while other volatiles resulted from radiogenic decay within the solid earth. Atmospheric oxygen resulted from the photo-dissociation of water vapor during the earth's early history and from photosynthetic activity in more recent times. The origin and evolution of atmospheric ozone is closely related to the growth of oxygen. The rise of ozone and the evolution of life is discussed in terms of an evolving oxygen atmosphere.

Levine, J. S.↗