Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

On the Degradation of the Effectiveness of Nonlinear Diffusion Acceleration with Parallel Block Jacobi Splitting

MOOSE's radiation transport module Rattlesnake comprises a first order S N solver that can be accelerated with a flexible Nonlinear Diffusion Acceleration. At each NDA iteration, the streaming and collision operator of the S{sub N} equations are (approximately) inverted using a transport sweep. When executed on multiple processors parallel block Jacobi (PBJ) splitting is utilized lagging the processor sub-domain's incoming angular fluxes making the implemented method asynchronous, i.e. the convergence properties of NDA become dependent on the number of concurrent tasks and details of the partitioning. Within this work, we study the NDA convergence properties for the two-dimensional C5G7 benchmark problem PBJ with p = 1, 2, 4, 8, 12, 16, 24, 32, 48, 60, 72, 96 and 144 concurrent tasks. Rosa studied the convergence properties of PBJ splitting methods with and without transport synthetic acceleration (TSA) in slab geometry and two-dimensional Cartesian geometry, respectively. Rosa's iteration scheme lags both the incoming angular fluxes and the scattering source making it very similar to the method described here. Rosa found by means of Fourier analysis that convergence of unaccelerated PBJ can degrade for optically thin subdomains, i.e. for a large number of processors given a fixed domain size. Depending on the choice of parameters application of TSA can lead to an effective algorithm. In contrast to Rosa's work, this work focuses on PBJ splitting for NDA accelerated solution of the multigroup eigenvalue problem. Later, Zerr and Anistratov used their integral transport matrix method in conjunction with PBJ. This iteration scheme is different as it does not lag the scattering source. Nevertheless, Fourier analysis with Diamond Difference spatial discretization showed that the method degrades with increasing the overall size of the spatial domain while keeping the sub-domain size constant. In the case of an infinite medium, the observed spectral radius becomes unity. These references establish the iterative performance of PBJ for one-group fixed source problems discretized on rectangular cells, but for the Rattlesnake first order NDA method, an emphasis lies on multigroup eigenvalue problems. In this setting, the additional complication arises that the low order equations are not exactly inverted, but only to some iterative criterion. Further, as the low order problem is solved using Jacobian-Free Newton Krylov methods, a suitable preconditioner for the GMRES iterations is required. As the effectiveness of the preconditioners may decrease when more concurrent processes are used, we expect the low order solve to impact the overall effectiveness of the NDA method in parallel execution as well. Therefore, this work focuses on the question of how detrimental the asynchronicity of the high and low order iterative solutions is for the effectiveness of NDA solutions of realistic, unstructured grid, multigroup eigenvalue problems. The iterative convergence properties of Rattlesnake's NDA method for multigroup eigenvalue problems are studied for varying number of concurrent processes. Rattlesnake's NDA method is asynchronous because the high order transport sweep uses PBJ splitting and because the low order solve's preconditioners, algebraic multigrid and additive Schwarz, are asynchronous. We found that up to 144 processes the number of Picard iterations increases by a factor of 2-3 affecting but not destroying NDA's parallel performance for the C5G7 benchmark problem, a representative LWR (light water reactor) configuration. The solution of the NDA low order eigenvalue problem posed greater problems than expected for the solvers currently available in Rattlesnake mainly because of problems to effectively precondition the modified low-order problem. As a matter of fact, the low order problem becomes an advection-diffusion problem. Non-robustness was observed for the AMG preconditioned coarse mesh acceleration for more than 60 concurrent processes, which was fixed by increasing the number of permissible V-cycles per AMG call. For fine mesh acceleration AMG proved to be ineffective and we resorted to ASM. For both AMG and ASM, increasing number of linear iterations per nonlinear are observed when increasing the number of processes, but for ASM this problem appears to be worse. The results from this work also indicate that initial development efforts should be diverted from implementation of a high-order parallel sweeping algorithm to the effective and robust iterative solution of the low order NDA multigroup eigenvalue problem. (authors)

97 MATHEMATICS AND COMPUTING↗

Overview of H- radio frequency ion sources for particle accelerators

Particle accelerators are among the most important scientific tools of the modern era. Large accelerator complexes have supported scientific user facilities which have had an enormous societal impact spanning many decades and enabling the work of thousands of scientific users worldwide contributing to many Nobel prizes in physics, biology and chemistry [1]. Many of the large hadron facilities employ accelerator complexes which include cyclotrons, synchrotrons, storage rings, linear or tandem accelerators and deliver ion beams of very high-intensity and/or very high-energy to their user facilities. These accelerator complexes require the injection of high-intensity beams of ions which are produced within an ion source and formed within a plasma or by bombardment of a surface [2]. Increasingly, RF systems are being utilized, to generate these ion-rich plasmas due to their high reliability and minimal use of consumable components. This report will first discuss the basic mechanisms of ion formation and plasma generation as well as some specifics of RF/microwave generators, matching circuits and plasma coupling structures typically employed. A detailed discussion will then be given of the RF-driven negative ion source systems employed by US Spallation Neutron Source as well as those used in similar facilities located around the globe. REFERENCES [1]Vladimir Shiltsev, “Particle beams behind physics discoveries”, Physics Today 73, Issue 4, 32 (2020) [2]Robert Welton et al, “Negative hydrogen ion sources for particle accelerators: Sustainability issues and recent improvements in long-term operations”, Journal of Physics Conf Series, 2244 012045

Welton, Robert F.↗

Radiation belt electron acceleration during the 17 March 2015 geomagnetic storm: Observations and simulations

Various physical processes are known to cause acceleration, loss, and transport of energetic electrons in the Earth's radiation belts, but their quantitative roles in different time and space need further investigation. During the largest storm over the past decade (17 March 2015), relativistic electrons experienced fairly rapid acceleration up to ~7 MeV within 2 days after an initial substantial dropout, as observed by Van Allen Probes. In the present paper, we evaluate the relative roles of various physical processes during the recovery phase of this large storm using a 3-D diffusion simulation. By quantitatively comparing the observed and simulated electron evolution, we found that chorus plays a critical role in accelerating electrons up to several MeV near the developing peak location and produces characteristic flat-top pitch angle distributions. By only including radial diffusion, the simulation underestimates the observed electron acceleration, while radial diffusion plays an important role in redistributing electrons and potentially accelerates them to even higher energies. Moreover, plasmaspheric hiss is found to provide efficient pitch angle scattering losses for hundreds of keV electrons, while its scattering effect on > 1 MeV electrons is relatively slow. Although an additional loss process is required to fully explain the overestimated electron fluxes at multi-MeV, the combined physical processes of radial diffusion and pitch angle and energy diffusion by chorus and hiss reproduce the observed electron dynamics remarkably well, suggesting that quasi-linear diffusion theory is reasonable to evaluate radiation belt electron dynamics during this big storm.

58 GEOSCIENCES↗

Accelerated growth of calcium silicate hydrates: Experiments and simulations

Despite the usefulness of isothermal calorimetry in cement analytics, without any further computations this brings only little information on the nucleation and growth of hydrates. A model originally developed by Garrault et al. is used in this study in order to simulate hydration curves of cement obtained by calorimetry with different known hardening accelerators. The limited basis set of parameters used in this model, having a physical or chemical significance, is valuable for a better understanding of mechanisms underlying in the acceleration of C-S-H precipitation. Alite hydration in presence of four different types of hardening accelerators was investigated. It is evidenced that each accelerator type plays a specific role on one or several growth parameters and that the model may support the development of new accelerators. Those simulations supported by experimental observations enable us to follow the formation of the C-S-H layer around grains and to extract interesting information on its apparent permeability.

36 MATERIALS SCIENCE↗

Automation and control of laser wakefield accelerators using Bayesian optimization

Laser wakefield accelerators promise to revolutionize many areas of accelerator science. However, one of the greatest challenges to their widespread adoption is the difficulty in control and optimization of the accelerator outputs due to coupling between input parameters and the dynamic evolution of the accelerating structure. Here, we use machine learning techniques to automate a 100 MeV-scale accelerator, which optimized its outputs by simultaneously varying up to six parameters including the spectral and spatial phase of the laser and the plasma density and length. Most notably, the model built by the algorithm enabled optimization of the laser evolution that might otherwise have been missed in single-variable scans. Subtle tuning of the laser pulse shape caused an 80% increase in electron beam charge, despite the pulse length changing by just 1%.

43 PARTICLE ACCELERATORS↗

Deployment and validation of predictive 6-dimensional beam diagnostics through generative reconstruction with standard accelerator elements

Understanding the 6-dimensional phase space distribution of particle beams is essential for optimizing accelerator performance. Conventional diagnostics such as use of transverse deflecting cavities offer detailed characterization but require dedicated hardware and space. Generative phase space reconstruction (GPSR) methods have shown promise in beam diagnostics, yet prior implementations still rely on such components. Here we present the first experimental implementation and validation of the GPSR methodology, realized by the use of standard accelerator elements including accelerating cavities and dipole magnets, to achieve complete 6-dimensional phase space reconstruction. Through simulations and experiments at the Pohang Accelerator Laboratory X-ray Free Electron Laser facility, we successfully reconstruct complex, nonlinear beam structures. Furthermore, we validate the methodology by predicting independent downstream measurements excluded from training, revealing the reconstruction closely resembling ground truth. This advancement establishes a pathway for predictive diagnostics across beamline segments while reducing hardware requirements and expanding applicability to various accelerator facilities.

Kim, Seongyeol [Pohang Univ. of Science and Techno↗

Fermi bubbles from stochastic acceleration of electrons in a Galactic outflow

The discovery of the Fermi bubbles – a huge bilobular structure seen in GeV gamma-rays above and below the Galactic centre – implies the presence of a large reservoir of high energy particles at ~10 kpc from the disk. The absence of evidence for a strong shock coinciding with the edge of the bubbles, and constraints from multi-wavelength observations point towards stochastic acceleration by turbulence as a likely mechanism of acceleration. We have studied the time-dependent acceleration of electrons in a large-scale outflow from the Galactic centre. For the first time, we propose a detailed numerical solution of the particle kinetic equation that includes the acceleration, transport and relevant energy loss processes. We also take into account the addition of shock acceleration of electrons at the bubble’s blast wave. Fitting to the observed spectrum and surface brightness distribution of the bubbles allows determining the transport coefficients, thereby shedding light on the origin of the Fermi bubbles.

43 PARTICLE ACCELERATORS↗

Direct Acceleration of Electrons in a Corrugated Plasma Channel

Direct laser acceleration of electrons provides a low power tabletop alternative to laser wakefield accelerators. Until recently, however, direct acceleration has been limited by diffraction, phase matching, and material damage thresholds. The development of the corrugated plasma channel [B. Layer et al., Phys. Rev. Lett. 99, 035001 (2007)] has removed all of these limitations and promises to allow direct acceleration of electrons over many centimeters at high gradients using femtosecond lasers [A. G. York et al., Phys Rev. Lett 100, 195001 (2008), J. P. Palastro et al., Phys. Rev. E 77, 036405 (2008)]. We present a simple analytic model of laser propagation in a corrugated plasma channel and examine the laser-electron beam interaction. Simulations show accelerating gradients of several hundred MeV/cm for laser powers much lower than required by standard laser wakefield schemes. In addition, the laser provides a transverse force that confines the high energy electrons on axis, while expelling low energy electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gradient Limitations in Room Temperature and Superconducting Acceleration Structures

Accelerating gradient is a key parameter of the accelerating structure in large linac facilities, like future Linear Collider. In room temperature accelerating structures the gradient is limited mostly by breakdown phenomena, caused by high surface electric fields or pulse surface heating. High power processing is a necessary procedure to clean surface and improve the gradient. In the best tested X-band structures the achieved gradient is exceed 100 MV/m in of {approx}200 ns pulses for breakdown rate of {approx}10{sup -7}. Gradient limit depends on number of factors and no one theory which can explain all sets of experimental results and predict gradient in new accelerating structure. In paper we briefly overview the recent experimental results of breakdown studies, progress in understanding of gradient limitations and scaling laws. Although superconducting rf technology has been adopted throughout the world for ILC, it has frequently been difficult to reach the predicted performance in these structures due to a number of factors: multipactoring, field emission, Q-slope, thermal breakdown. In paper we are discussing all these phenomena and the ways to increase accelerating gradient in SC cavity, which are a part of worldwide R and D program.

43 PARTICLE ACCELERATORS↗

Advanced Accelerating Structures and Their Interaction with Electron Beams

In this paper, we give a brief description of several advanced accelerating structures, such as dielectric loaded waveguides, photonic band gap, metamaterials and improved iris-loaded cavities. We describe wakefields generated by passing high current electron beams through these structures, and applications of wakefields to advanced accelerator schemes. One of the keys to success for high gradient wakefield acceleration is to develop high current drive beam sources. As an example, the high current RF photo injector at the Argonne Wakefield Accelerator, passed a {approx}80 nC electron beam through a high gradient dielectric loaded structure to achieve a 100 MV/m gradient. We will summarize recent related experiments on beam-structure interactions and also discuss high current electron beam generation and propagation and their applications to wakefield acceleration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-turn extraction from a K110 AVF cyclotron by flat-top acceleration

Single-turn extraction from the Japan Atomic Energy Agency AVF cyclotron with a K number of 110 using a flat-top (FT) acceleration system has been achieved to reduce the energy spread of an ion beam for microbeam formation with energy up to hundreds of MeV and to increase extraction efficiency from the cyclotron. In order to generate a FT waveform voltage using the fifth-harmonic frequency on a dee electrode, a FT resonator was designed using MAFIA code to achieve downsizing and low power consumption. The FT resonator, coupled to the main resonator through a coupling capacitor, covered the full range of the fifth harmonic frequency from 55 to 110 MHz. Various ion beams, accelerated using different acceleration harmonic modes of h=1 and 2, such as 220 MeV {sup 12}C{sup 5+} (h=2), 260 MeV {sup 20}Ne{sup 7+} (h=2), and 45 MeV H{sup +} (h=1), were developed by FT acceleration. A clear turn separation of the beam bunches was successfully observed at the extraction region of the large-scale AVF cyclotron with number of revolutions greater than 200. As a result, high extraction efficiency (over 95%) from the cyclotron was achieved. Single-turn extraction was confirmed by counting the number of beam bunches out of the cyclotron for an injected beam pulsed by a beam chopping system in the injection line. The energy spread of the 260 MeV {sup 20}Ne{sup 7+} beam was measured using an analyzing magnet, and we verified a reduction in the energy spread from {delta}E/E=0.1% to 0.05% by single-turn extraction after FT acceleration.

43 PARTICLE ACCELERATORS↗

Development of 1 MeV H{sup -} Accelerator at JAEA for ITER NB

This paper reports the recent activities at JAEA for the development of 1 MeV H{sup -} ion accelerator toward the ITER NBI. For the development of MAMuG accelerator, a 320 mA H{sup -} ion beam was successfully accelerated as the highest record in the world at the MeV class energy (796 keV). This was achieved by protecting the H{sup -} ion source from the high heat load by the backstream positive ions, which was produced during the high current H{sup -} ion acceleration. The SINGAP accelerator was tested at JAEA to compare the performance of the SINGAP and the MAMuG. This paper also reports the results of the SINGAP test and the comparison between the SINGAP and the MAMuG is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A New High-Current Proton Accelerator

A high-current (>20 mA) dc proton accelerator is being developed for applications such as boron neutron capture therapy (BNCT) and the detection of explosive materials by nuclear resonance absorption (NRA) of gamma radiation. The high-voltage dc accelerator (adjustable between 1.4 and 2.8 MeV) will be a single-ended industrial Dynamitron registered system equipped with a compact high-current, microwave-driven proton source. A magnetic mass analyzer inserted between the ion source and the acceleration tube will select the protons and reject heavier ions. A sorption pump near the ion source will minimize the flow of neutral hydrogen gas into the acceleration tube. For BNCT, a lithium target for generating epithermal neutrons is being developed that will be capable of dissipating the high power (>40 kW) of the proton beam. For NRA, special targets will be used to generate gamma rays with suitable energies for exciting nuclides typically present in explosive materials. Proton accelerators with such high-current and high-power capabilities in this energy range have not been developed previously.

43 PARTICLE ACCELERATORS↗

A review of ion sources for medical accelerators (invited)

There are two major medical applications of ion accelerators. One is a production of short-lived isotopes for radionuclide imaging with positron emission tomography and single photon emission computer tomography. Generally, a combination of a source for negative ions (usually H- and/or D-) and a cyclotron is used; this system is well established and distributed over the world. Other important medical application is charged-particle radiotherapy, where the accelerated ion beam itself is being used for patient treatment. Two distinctly different methods are being applied: either with protons or with heavy-ions (mostly carbon ions). Proton radiotherapy for deep-seated tumors has become widespread since the 1990s. The energy and intensity are typically over 200 MeV and several 10{sup 10} pps, respectively. Cyclotrons as well as synchrotrons are utilized. The ion source for the cyclotron is generally similar to the type for production of radioisotopes. For a synchrotron, one applies a positive ion source in combination with an injector linac. Carbon ion radiotherapy awakens a worldwide interest. About 6000 cancer patients have already been treated with carbon beams from the Heavy Ion Medical Accelerator in Chiba at the National Institute of Radiological Sciences in Japan. These clinical results have clearly verified the advantages of carbon ions. Heidelberg Ion Therapy Center and Gunma University Heavy Ion Medical Center have been successfully launched. Several new facilities are under commissioning or construction. The beam energy is adjusted to the depth of tumors. It is usually between 140 and 430 MeV/u. Although the beam intensity depends on the irradiation method, it is typically several 10{sup 8} or 10{sup 9} pps. Synchrotrons are only utilized for carbon ion radiotherapy. An ECR ion source supplies multi-charged carbon ions for this requirement. Some other medical applications with ion beams attract developer's interests. For example, the several types of accelerators are under development for the boron neutron capture therapy. This treatment is conventionally demonstrated by a nuclear reactor, but it is strongly expected to replace the reactor by the accelerator. We report status of ion source for medical application and such scope for further developments.

43 PARTICLE ACCELERATORS↗

Mechanism of electron acceleration by chirped laser pulse

We studied the mechanism of electron acceleration by a chirped laser pulse. We found that, because of the chirp effect, a region exists where the laser wave phase experienced by the electron varies slowly, so that the electron can be accelerated for a long time. The mechanism of chirped laser acceleration is different to that of the capture and acceleration scenario, although both of them have a main acceleration stage in which the electrons are trapped for long periods.

43 PARTICLE ACCELERATORS↗

Optimized laser pulse profile for efficient radiation pressure acceleration of ions

The radiation pressure acceleration regime of laser ion acceleration requires high intensity laser pulses to function efficiently. Moreover, the foil should be opaque for incident radiation during the interaction to ensure maximum momentum transfer from the pulse to the foil, which requires proper matching of the target to the laser pulse. However, in the ultrarelativistic regime, this leads to large acceleration distances, over which the high laser intensity for a Gaussian laser pulse must be maintained. It is shown that proper tailoring of the laser pulse profile can significantly reduce the acceleration distance, leading to a compact laser ion accelerator, requiring less energy to operate.

43 PARTICLE ACCELERATORS↗

A new type of accelerator for charged particle cancer therapy

Non-scaling Fixed Field Alternating Gradient accelerators (ns-FFAGs) show great potential for the acceleration of protons and light ions for the treatment of certain cancers. They have unique features as they combine techniques from the existing types of accelerators, cyclotrons and synchrotrons, and hence look to have advantages over both for this application. However, these unique features meant that it was necessary to build one of these accelerators to show that it works and to undertake a detailed conceptual design of a medical machine. Both of these have now been done. This paper will describe the concepts of this type of accelerator, show results from the proof-of-principle machine (EMMA) and described the medical machine (PAMELA).

43 PARTICLE ACCELERATORS↗

Enhancement of proton acceleration field in laser double-layer target interaction

A mechanism is proposed to enhance a proton acceleration field in laser plasma interaction. A double-layer plasma with different densities is illuminated by an intense short pulse. Electrons are accelerated to a high energy in the first layer by the wakefield. The electrons accelerated by the laser wakefield induce the enhanced target normal sheath (TNSA) and breakout afterburner (BOA) accelerations through the second layer. The maximum proton energy reaches about 1 GeV, and the total charge with an energy higher than 100 MeV is about several tens of μC/μm. Both the acceleration gradient and laser energy transfer efficiency are higher than those in single-target-based TNSA or BOA. The model has been verified by 2.5D-PIC simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗