Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “X-ray imaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Novel Dosimetry Method for Small Animal Irradiators Using 3D-printed Mouse Phantoms and Alanine Dosimeters

Abstract Accurate dosimetry is a crucial component of small animal and preclinical irradiation studies. Various dosimetry options are available but fail to characterize complex geometries and variable energy spectra of modern x-ray irradiators accurately. These options also lack national/international standards of recognition. This paper presents a novel dosimetry system, Dosequate, which uses murine phantoms embedded with alanine dosimeters and paired with x-ray energy spectra corrections to deliver consistent and accurate dosimetry measurements. This study compares Dosequate measurements against a Precision X-RAD 320 internal ion chamber and the treatment planning system of an Xstrahl Small Animal Radiation Research Platform. Results demonstrate the accuracy and reproducibility of the Dosequate system, highlighting its potential for standardizing dosimetry in preclinical research throughout the industry. Results demonstrate the accuracy and reproducibility of the Dosequate system, highlighting its potential for standardizing dosimetry in preclinical research throughout the industry. The Dosequate dosimetry method provides a robust and standardized approach for measuring absorbed dose in small animal irradiators. Its accuracy, reproducibility, and ability to account for complex irradiation geometries make it a valuable tool for preclinical research. This system has the potential to significantly improve the intercomparability of studies across different facilities and enhance the reliability of results.

Environmental Sciences & Ecology↗
DOE OSTI2024

A Scalable & Non-Destructive Characterization Strategy to Study Semiconductor/Dielectric Interfaces and Predict Wafer-Level Device Performance

The defect density present at the dielectric-semiconductor interface in an MOS structure directly influences the channel carrier characteristics in semiconductor devices, especially in wide bandgap material systems used in power devices. While these trap defects are typically quantified through electrical characterization of MOS-capacitor test structures, this treatment offers very little insight into the physical nature of interface defects. Such shortcomings demand a physical characterization strategy to guide fabrication optimization. X-ray photoelectron spectroscopy (XPS) is suggested as a viable technique to determine chemical data for dielectric interfaces formed using atomic layer deposition (ALD) on GaN substrates. Previously, 1-D XPS characterization has confirmed the presence of a Ga x O y interlayer between ALD dielectrics and the GaN substrate. In this work, XPS data is serially collected to form 2-D images of an ALD-Al 2 O 3 /GaN interface as a proof-of-concept experiment for in-situ XPS quality monitoring during ALD processing. The information provided by this work reveals some of the challenges for incorporating XPS characterization as an in-situ strategy during fabrication of GaN-based devices. Separately, electrical mapping of a 2-D array of ALD-Al 2 O 3 /GaN MOS-capacitor devices provide a means to quantify the spatial variations in interface quality across a single wafer. Physical characterization techniques, such as time-of-flight secondary ion mass spectroscopy, provide additional chemical information about the Al 2 O 3 /Ga x O y /GaN structure that complement the electrical mapping results. This analysis shows that a higher Ga x O y content correlates with higher interface state defects for trap energies deep in the band gap.

42 ENGINEERING↗
DOE OSTI2025

Ion-rich Acceleration during an Eruptive Flux Rope Event in a Multiple Null-point Configuration

We report on the γ-ray emission above 100 MeV from the GOES M3.3 flare SOL2012-06-03. The hard X-ray (HXR) and microwave emissions have typical time profiles with a fast rise to a well-defined peak followed by a slower decay. The >100 MeV emission during the prompt phase displayed a double-peaked temporal structure with the first peak following the HXR and microwaves, and the second one, about 3 times stronger, occurring 17 ± 2 s later. The time profiles seem to indicate two separate acceleration mechanisms at work, where the second γ-ray peak reveals a potentially pure or at least largely dominant ion acceleration. The Atmospheric Imaging Assembly imaging shows a bright elliptical ribbon and a transient brightening in the northwestern (NW) region. Nonlinear force-free extrapolations at the time of the impulsive peaks show closed field lines connecting the NW region to the southeastern part of the ribbon, and the magnetic topology revealed clusters of nulls. These observations suggest a spine-and-fan geometry, and based on these observations, we interpret the second γ-ray peak as being due to the predominant acceleration of ions in a region with multiple null points. The >100 MeV emission from this flare also exhibits a delayed phase with an exponential decay of roughly 350 s. We find that the delayed emission is consistent with ions being trapped in a closed flux tube with gradual escape via their loss cone to the chromosphere.

Pesce-Rollins, Melissa [Istituto Nazionale di Fisi↗
DOE OSTI2026

Fracture Intersections under Stress: Laboratory Data and Code [Data set]

The connectivity of natural and induced fractures governs the injection and withdrawal of fluids from subsurface reservoirs. Connectivity depends on intersections that control how fluids mix and move through the entire system. Here, we present data sets from 3D X-ray microscopy measurements of simple fracture networks under stress. 3D printing was used to create prismatic blocks that formed fracture networks composed of 2 orthogonal fractures. The network orientation was either "x" or "+" relative to an applied vertical stress. 3D data sets were collected for normal loads of 25, 100 and 200 Newtons for samples with fracture surfaces with either correlated or uncorrelated asperity distributions. The file contains data from the 12 samples analyzed along with an example code used to extract the intersection geometry. Additional experimental details can be found in the manuscript "Geologic Stress Modulates Fluid Mixing at Fracture Intersections" (10.1038/s43247-026-03525-9)and supplemental information to appear in Communications Earth & Environment in 2026.

02 PETROLEUM↗
NASA NTRS1979

Low intensity X-ray and gamma-ray imaging device

A radiation to visible light converter is combined with a visible light intensifier. The converter is a phosphor or scintillator material which is modified to block ambient light. The intensifier includes fiber optics input and output face plates with a photocathode-microchannel plate amplifier-phosphor combination. Incoming radiation is converted to visible light by the converter which is piped into the intensifier by the input fiber optics face plate. The photocathode converts the visible light to electrons which are amplified by a microchannel plate amplifier. The electrons are converted back to light by a phosphor layer and piped out for viewing by the output fiber optics faces plate. The converter-intensifier combination may be further combined with its own radiation source or used with an independent source.

Yin, L. I.↗
NASA NTRS1979

Ray-tracing the convex curved crystal X-ray spectrograph

The convex curved crystal X-ray spectrograph has recently seen increasing use for the spectral analysis of transient plasmas. The present paper describes the calculation of ray paths through the spectrograph for both localized and extended sources. The method traces a ray from any given source point to its point of diffraction by the curved crystal and then to the imaging circle, where the image point is obtained. Application of the ray tracing method is made to some actual experimental configurations to obtain resolution values and source sizes. Wavelength calibrations are obtainable with the ray tracing method in advance of instrument construction.

Kastner, S. O.↗
NASA NTRS1979

Evidence for X-ray emission from Kepler's supernova remnant

Evidence for weak soft X-ray emission from the remnant of Kepler's supernova has been acquired by the low energy detectors of the A 2 experiment on HEAO 1. A soft X-ray source has been detected using a narrow field of view sensitive to X rays between 0.2 and 3 keV and is found to be the only constant X-ray source within the error box containing Kepler's supernova remnant. The intensity of the X-ray source is calculated to be about 6.3 x 10 to the -2 counts/sq cm sec, with an intrinsic X-ray luminosity in the energy range 0.3 to 3 keV of about 28 x 10 to the 35 erg/sec if, as is widely believed, the remnant is at a distance of 4 kpc. Observations from HEAO 2 will allow the detection to be confirmed, the source to be imaged and its spectrum to be determined.

Tuohy, I. R.↗
NASA NTRS1978

Some contemplated improvements to the prototype Lixiscope

Some contemplated improvements on the Lixiscope are described. These can be divided roughly into two categories: those which are well within existing technology, and thus can be implemented immediately; and those which are more at the state-of-the-art level, and which are directly related to applications in X-ray and gamma ray imaging in astronomy.

Yin, L. I.↗
NASA NTRS1982

Low intensity X-ray and gamma-ray spectrometer

A low intensity X-ray and gamma ray spectrometer for imaging, counting, and energy resolving of single invisible radiation particles is described. The spectrometer includes a converting device for converting single invisible radiation particles to visible light photons. Another converting device converts the visible light photons to photoelectrons. A fiber optics coupling device couples together the two converting devices. An intensifying device intensifies the photoelectrons by an average gain factor of between 10 to the 4th power and 10 to the 7th power. The tensifying device is an anti-ion feedback microchannel plate amplifier which is operated substantially below saturation. A displaying device displays the intensified photoelectrons. The displaying device 32 indicates the spatial position, number, and energy of the incoming single invisible radiation particles.

Yin, L. I.↗
NASA NTRS1982

Discovery of 69 ms periodic X-ray pulsations in A0538-66

The detection of X ray pulsations with a period of 69.2126 ms from A0538-66 was done from the Einstein Observatory. A point source was located by the High Resolution Imager and a proportional counter registered a flux of 40 counts/sec over background. A column spectral density of 2 x 10 to the 23/sq cm identified the object as A0538-66. A persistent periodicity of 0.0692126 sec was observed throughout the event. The outbursts were not detected on three other observations of A0538-66, and a best fit to a change of rotation velocity indicated that the period observed was from a binary star with a Doppler shifted signal. The two stars are separated by less than 39 solar radii, with the larger star having a 40 solar radius. Consideration is given to the possibility that the X rays are due to accretion on a neutron star and that the two stars at times share a common envelope.

Skinner, G. K.↗
NASA NTRS1983

Viewer Makes Radioactivity "Visible"

Battery operated viewer demonstrates feasibility of generating threedimensional visible light simulations of objects that emit X-ray or gamma rays. Ray paths are traced for two pinhold positions to show location of reconstructed image. Images formed by pinholes are converted to intensified visible-light images. Applications range from radioactivity contamination surveys to monitoring radioisotope absorption in tumors.

Yin, L. I.↗
NASA NTRS1982

Further observational evidence for a coronal boundary line in the cool star region of the H-R diagram

Soft X-ray emission was detected from Gamma Hya and 37 Com, at levels of 6-8 x 10 to the -13th ergs/sq cm per sec, during 0.2-4.0 keV observations of eight G-K giant stars obtained with the Einstein Observatory's Imaging Proportional Counter. Upper limits of about 3 x 10 to the 13th ergs/sq cm per sec were determined for the remaining stars. These results are judged to strengthen the Ayres et al (1981) findings that stellar coronae whose temperature is greater than one million K are either very weak or entirely absent among red giants and supergiants, while a large range in coronal emission exists among the yellow giant and supergiant stars.

Haisch, B. M.↗
NASA NTRS1983

A new AM Her-like X-ray source

The discovery of a new X ray source associated with a binary and classifiable as a member of the AM Her class of objects is reported. The object was located with a detector on the HEAO A-2 spacecraft and by the imaging proportional counter on the Einstein Observatory. Detection occurred in the 0.15-0.4 keV band, and intensity variations of a factor of 2 were observed to happen on a time scale of around 2 hr. A location error box 0.9 deg on a side was constructed from the 2.95 deg overlapping FWHM field of view of the HEAO detector. The object, designated HO139-68, was reexamined using photometric and spectroscopic scans of it and the companion, which has been observed to be an ordinary late type star. Evidence for the presence of a magnetic white dwarf in the binary is discussed, noting indications of cyclotron emission. The X ray source flux is estimated to be 2.3/10 billion erg per sq cm per sec.

Agrawal, P. C.↗
NASA NTRS1983

The mass of Tycho's supernova remnant as determined from a high-resolution X-ray map

High resolution Einstein Observatory X ray images of Tycho's supernova remnant (SNR) are discussed. The object has features of a shock heated shell in the interstellar medium, accompanied by an inner shell with clumped ejecta. The measurements were made for 22 hr on Feb. 8, 1979, revealing a circular SNR, a thin emission shelf at the outer edge of the remnant, no emission in the central object, and most emissions concentrated in small, clumpy objects within a spherical shell. Three components of the X ray emission were identified, and calculations of the swept-up mass, the diffuse component of the ejecta shell, and the clumpy ejecta are reported to be 2.2, 1.2, and 0.7 solar mass, respectively. The SNR is concluded to be at an evolutionary stage between uniform expansion and adiabatic changes.

Seward, F.↗
NASA NTRS1983

X-ray and microwave observations of active regions

Coordinated high-resolution (1-3 arcsec) observations of two active solar regions (H 421 and H 419) on November 16, 1979, are reported: soft-X-ray filtergrams from a sounding rocket flight, VLA total-intensity and circular-polarization microwave (6-cm) radio maps, KPNO full-disk photospheric magnetograms, and BBSO H-alpha data. The images were converted to 4.8-arcsec/mm-scale transparencies and coaligned on the basis of sunspot positions for comparison. The two active regions are characterized in detail, and intensity, size, and polarization data for the brightest microwave components (BMC) are listed. It is found that 19 of the 32 BMC are farther than 5 arcsec from any sunspot, and that X-ray-emitting structures only rarely correspond to sunspots, or BMC. About one third of the BMC are located at the feet or legs of coronal loops smaller than about 50,000 km. The limitations implied by these obervations for proposed thermal-bremsstrahlung, thermal-gyro-resonance, and nonthermal microwave-emission mechanisms are discussed.

Webb, D. F.↗
NASA NTRS1984

The Euclidean slope of the X-ray source counts - A 'cosmic conspiracy'

The selection criteria adopted for the Einstein Observatory Medium Sensitivity survey are delineated and the results of an analysis of the source-count relation for extragalactic X ray sources is presented. Only IPC fields at least 20 deg outside of the galactic plane, and then only those images in the center of the fields, were included. A total of 345 objects were sighted in the 0.3-3.5 keV energy interval, and 77 percent were concluded to be extragalactic. Most were associated with active galactic nuclei (AGN), including Seyfert galaxies and quasars, and galactic clusters. A slope of about 1.7 was calculated for the power law of the energy spectra of AGNs and close to 1.0 for clusters.

Gioia, I. M.↗
NASA NTRS1985

The Einstein soft X-ray survey of the Pleiades

The results of a 0.1-4.5-keV X-ray survey of a 2 x 2-deg area centered on the Pleiades open cluster, performed using the imaging proportional counter and high-resolution imager of the Einstein Observatory on four days in 1980-1981, are presented in extensive tables, graphs, maps, histograms, and finding charts and characterized. A total of 61 sources are detected, and 44 of these are identified with cluster members of spectral types B-M. Findings discussed include Lx/Lbol of 10 the -7th for early-type stars; F-star mean Lx like that of F stars in the Hyades and in the field (denying time evolution of Lx); mean G-star Lx = 3.7 x 10 to the 29th erg/sec; G-star activity decay more gradual than 1/sq rt t, with sharp fall for t greater than 1 Gyr; and no evidence for X-ray-emissivity/rotational-velocity correlation in a homogeneous sample of K dwarfs or a sample of K and M stars with established V sin i data.

Caillault, J.-P.↗