Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WENDI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Influence of a magnetic field during directional solidification of MAR-M 246 + Hf superalloy

An area that has been almost totally overlooked in the optimization of properties in directionally solidified superalloys is the control of microstructural features through the application of a magnetic field during solidification. The influence of a magnetic field on the microstructural features of a nickel-base superalloys is investigated. Studies were performed on the dendritic MAR-M 246+Hf alloy, which was solidified under both a 5 K gauss magnetic field and under no-applied-field conditions. The possible influences of the magnetic field on the solidification process were observed by studying variations in microstructural features including volume fraction, surface area, number, and shape of the carbide particles. Stereological factors analyzed also included primary and secondary dendrite arm spacing and the volume fraction of the interdendritic eutectic constituent. Microprobe analysis was performed to determine the chemistry of the carbides, dendrites, and interdendritic constituents, and how it varied between field and no-field solidification samples. Experiments involving periodic application and removal of the magnetic field were also performed in order to permit a comparison with structural variations observed in a MAR-M 246+Hf alloy solidified during KC-135 high-g, low-g maneuvers.

Andrews, J. Barry↗

Static performance tests of a flight-type STOVL ejector

The design and development of thrust augmenting STOVL ejectors has typically been based on experimental iteration (i.e., trial and error). Static performance tests of a full scale vertical lift ejector were performed at primary flow temperatures up to 1560 R (1100 F). Flow visualization (smoke generators and yarn tufts) were used to view the inlet air flow, especially around the primary nozzle and end plates. Performance calculations are presented for ambient temperatures close to 480 R (20 F) and 535 R (75 F) which simulate seasonal aircraft operating conditions. Resulting thrust augmentation ratios are presented as functions of nozzle pressure ratio and temperature.

Barankiewicz, Wendy S.↗

Status of the profession

The number of astronomers has grown by about 40 percent over the past decade. The number of astronomers with jobs in industry, or with long-term, non-tenured, jobs has increased dramatically compared with traditional faculty positions. The increase in the number of astronomers and the declining share of the NSF budget going to astronomy has led to extreme difficulties in the NSF grant program and in support of the National Observatories. In 1989, direct NASA support of astronomers through the grants program exceeds that of NSF, although the total of the NSF grants program over decade far exceeds that of NASA. Access to major new telescopes will be important issue for the 1990s. US astronomers, who once had a monopoly on telescopes larger than 3 meters, will, by the year 2000, have access to just half of the world's optical telescope area.

Boyce, Peter B.↗

Buckling analysis and test correlation of hat stiffened panels for hypersonic vehicles

The paper discusses the design, analysis, and test of hat stiffened panels subjected to a variety of thermal and mechanical load conditions. The panels were designed using data from structural optimization computer codes and finite element analysis. Test methods included the grid shadow moire method and a single gage force stiffness method. The agreement between the test data and analysis provides confidence in the methods that are currently being used to design structures for hypersonic vehicles. The agreement also indicates that post buckled strength may potentially be used to reduce the vehicle weight.

Percy, Wendy C.↗

Buckling analysis and test correlation of high temperature structural panels

This paper focuses on the design, analysis, and test of a high temperature structural panel, constructed of Ti-6-4, subjected to a variety of thermal and mechanical load conditions. A follow-on panel, constructed of TMC, is also discussed in less detail. The design constraints and test set-up are discussed, as well as the test methods that were used: the grid shadow moire method and a single gage force stiffness method. The agreement between the test data and analysis for this test program provides confidence in the methods that are currently being used to design structures for hypersonic vehicles. The agreement also suggests that postbuckled strength may potentially be used to reduce the vehicle weight.

Teare, Wendy P.↗

An empirical test for the metallicity sensitivity of the Cepheid period-luminosity relation

The results are reported of the first observational test of the sensitivity of the zero point of the Cepheid period-luminosity relation to metal abundance. BVRI time-averaged observations of Cepheids in three radially separated and chemically different fields in M31 are used to find mean reddenings and true distance moduli that differ by only 0.25 mag. Consistent distances are found for all three fields. The large observed differences in the apparent moduli can be totally attributed to different mean extinctions among the three fields.

Freedman, Wendy L.↗

Modeling the reflectance spectrum of Callisto 0.25 to 4.1 microns

Models employing Hapke's (1981) radiative transfer theory are presented for the 0.2-4.1 micron reflectance spectrum. A simultaneous intimate, as well as aereal, mixture solution of ice and dark material is envisioned, in order to satisfy both absorption band depths and reflectance levels. The models indicate that the surface's ice component is rather large-grained, and that the major spectral features above about 2.5 microns cannot be accounted for by the ice. Spectra obtained for the nonice material were similar to each other; their absorption features resemble hydrated silicates bearing both oxidation states of iron.

Calvin, Wendy M.↗

New Cepheid distances to nearby galaxies based on BVRI CCD photometry. II - The local group galaxy M33

A true distance modulus to the nearby spiral galaxy M33 has been determined based on CCD photometry obtained at BVRI wavelengths. M33 is presently one of five nearby galaxies used in the calibration of the IR Tully-Fisher relation, and thereby in the determination of the Hubble constant. Using period-luminosity relations at several wavelengths offers the advantage that the distance moduli derived can be corrected for the effects of interstellar extinction. These data indicate that there is internal reddening affecting the Cepheid photometry in M33 which must be accounted for if a true distance modulus is to be obtained for this galaxy. Adopting a true distance modulus to the LMC of 18.5 mag, the new CCD data yield a true distance to M33 of 24.64 + or - 0.09 mag, corresponding to a linear distance of 840 kpc. A mean value of the total color excess (foreground and internal) for the Cepheids in M33 is estimated to be E(B - V) = 0.10 + or - 0.09 mag, assuming a value for the total mean LMC Cepheid color excess of 0.10 mag.

Freedman, Wendy L.↗

Static performance tests of a flight-type STOVL ejector

The design and development of thrust augmenting STOVL ejectors has typically been based on experimental iteration (i.e., trial and error). Static performance tests of a full scale vertical lift ejector were performed at primary flow temperatures up to 1560 R (1100 F). Flow visualization (smoke generators and yarn tufts) were used to view the inlet air flow, especially around the primary nozzle and end plates. Performance calculations are presented for ambient temperatures close to 480 R (20 F) and 535 R (75 F) which simulate seasonal aircraft operating conditions. Resulting thrust augmentation ratios are presented as functions of nozzle pressure ratio and temperature.

Barankiewicz, Wendy S.↗

The Cepheid distance scale

Developments concerning the period-luminosity (PL) relation for classical Cepheids are discussed with particular emphasis on the fact that Cepheids continue to provide the most homogeneous and reliable set of distances to many nearby galaxies. Observational programs relating to extragalactic Cepheids are also reviewed, and new distances and reddenings to individual galaxies are determined from these data using multiwavelength PL relations, based for the first time on self-consistent calibrating data sets. Three recent promising secondary extragalactic distance indicators (Tully-Fisher, planetary nebula luminosity functions, and surface-brightness fluctuations) tie their zero points to the Cepheid distance scale and give globally consistent values for the Hubble constant of about 80 km/sec/Mpc. Tying the Faber-Jackson relation and the supernova distance scales to the Leo and Virgo clusters yields similar results. Such a value for the Hubble constant is marginally inconsistent with new estimates of the ages of globular clusters, and it may prove to be a serious problem for standard cold-dark-matter models of the universe.

Madore, Barry F.↗

Comparison of display enhancement with intelligent decision-aiding

Currently, two main approaches exist for improving the human-machine interface component of a system in order to improve overall system performance, display enhancement and intelligent decision aiding. Each of these two approaches has its own set of advantages and disadvantages, as well as introduce its own set of additional performance problems. These characteristics should help identify which types of problem situations and domains are better aided by which type of strategy. The characteristic issues are described of these two decision aiding strategies. Then differences in expert and novice decision making are described in order to help determine whether a particular strategy may be better for a particular type of user. Finally, research is outlined to compare and contrast the two technologies, as well as to examine the interaction effects introduced by the different skill levels and the different methods for training operators.

Kirlik, Alex↗

Use of an approximate similarity principle for the thermal scaling of a full-scale thrust augmenting ejector

Full temperature ejector model simulations are expensive, and difficult to implement experimentally. If an approximate similarity principle could be established, properly chosen performance parameters should be similar for both hot and cold flow tests if the initial Mach number and total pressures of the flow field are held constant. Existing ejector data is used to explore the utility of one particular similarity principle; the Munk and Prim similarity principle for isentropic flows. Static performance test data for a full-scale thrust augmenting ejector are analyzed for primary flow temperatures up to 1560 R. At different primary temperatures, exit pressure contours are compared for similarity. A nondimensional flow parameter is then used to eliminate primary nozzle temperature dependence and verify similarity between the hot and cold flow experiments.

Barankiewicz, Wendy S.↗

Space Station Freedom environmental database system (FEDS) for MSFC testing

The Water Recovery Test (WRT) at Marshall Space Flight Center (MSFC) is the first demonstration of integrated water recovery systems for potable and hygiene water reuse as envisioned for Space Station Freedom (SSF). In order to satisfy the safety and health requirements placed on the SSF program and facilitate test data assessment, an extensive laboratory analysis database was established to provide a central archive and data retrieval function. The database is required to store analysis results for physical, chemical, and microbial parameters measured from water, air and surface samples collected at various locations throughout the test facility. The Oracle Relational Database Management System (RDBMS) was utilized to implement a secured on-line information system with the ECLSS WRT program as the foundation for this system. The database is supported on a VAX/VMS 8810 series mainframe and is accessible from the Marshall Information Network System (MINS). This paper summarizes the database requirements, system design, interfaces, and future enhancements.

Story, Gail S.↗

Simulation of 3-D shear flows around a nozzle-afterbody at high speeds

3D, compressible, unsteady, Reynolds-averaged Navier-Stokes equations are presently solved by a finite-volume and alternating-direction-implicit method in order to simulate supersonic and hypersonic turbulent shear flows. The effect of turbulence is incorporated via a modified Baldwin-Lomax eddy viscosity model which reflects the influence of high-speed compressibility, multiple walls, near-wall vortices, and turbulent memory effects, as well as local equilibrium effects. Attention is given to the simulation of the flow around the nozzle-afterbody of a generic, scramjet-propelled hypersonic vehicle; computed pressure distributions are consonant with experimental surface and off-surface flow surveys.

Baysal, Oktay↗

Major wildfires at the Cretaceous-Tertiary boundary

The current status of the reconstruction of major biomass fire events at the Cretaceous-Tertiary boundary is discussed. Attention is given to the sources of charcoal and soot, the identification of biomass and fossil carbon, and such ignition-related problems as delated fires, high atmospheric O2 content, ignition mechanisms, and the greenhouse-effect consequences of fire on the scale envisioned. Consequences of these factors for species extinction patterns are noted.

Anders, Edward↗

The reddening to the galaxy IC 342 from CCD BV photometry of its brightest stars

An attempt was made to estimate the reddening for the galaxy IC 342 on the basis of CCD BV photometry obtained for 117 stars brighter than V = 22.0 mag in a field centered near a spiral arm. At V = 19.4 mag, the plume of the main sequence and slightly evolved blue supergiant stars were detected. The plume is centered at a color of (B-V) = 0.54 mag. A comparison with similar color-magnitude-diagram data for the brightest stars in IC 1613 suggests that these stars in IC 342 are reddened by E(B-V) = 0.79 +/- 0.05 mag (A sub B = 3.32 +/- 0.21 mag).

Madore, Barry F.↗

Aerodynamic performance of a drag reduction device on a full-scale tractor/trailer

The effectiveness of an aerodynamic boattail on a tractor/trailer road vehicle was measured in the NASA Ames Research Center 80- by 120-Foot Wind Tunnel. Results are examined for the tractor/trailer with and without the drag reduction device. Pressure measurements and flow visualization show that the aerodynamic boattail traps a vortex or eddy in the corner formed between the device and the rear corner of the trailer. This recirculating flow turns the flow inward as it separates from the edges of the base of the trailer. This modified flow behavior increases the pressure acting over the base area of the truck, thereby reducing the net aerodynamic drag of the vehicle. Drag measurements and pressure distributions in the region of the boattail device are presented for selected configurations. The optimum configuration reduces the overall drag of the tractor/trailer combination by about 10 percent at a zero yaw angle. Unsteady pressure measurements do not indicate strong vortex shedding, although the addition of the boattail plates increases high frequency content of the fluctuating pressure.

Lanser, Wendy R.↗

Analysis of a pneumatic forebody flow control concept about a full aircraft geometry

A full aircraft geometry is used to computationally analyze the effectiveness of a pneumatic forebody flow control concept. An overset grid technique is employed to model the aircraft and slot geometry. Steady-state solutions for both isolated forebody and full aircraft configurations are carried out using a thin-layer Navier-Stokes flow solver. A solution obtained using the full aircraft geometry and a flight sideslip condition investigates the effect of sideslip on the leading edge extention vortex burst point. A no-sideslip blowing solution using the isolated forebody at full-scale wind tunnel test conditions is compared with experimental data to determine the accuracy of the numerical method. A solution employing the full geometry and slot blowing at flight conditions is obtained.

Gee, Ken↗