Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vinyl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Photodissociation of (SO{sub 2}⋯XH) Van der Waals complexes and clusters (XH = C{sub 2}H{sub 2}, C{sub 2}H{sub 4}, C{sub 2}H{sub 6}) excited at 32 040–32 090 cm{sup −1} with formation of HSO{sub 2} and X

We studied photodecomposition dynamics of (SO{sub 2}⋯XH) Van der Waals’ (VdW) complexes and clusters in gas phase, with X = C{sub 2}H, C{sub 2}H{sub 3}, and C{sub 2}H{sub 5}. SO{sub 2} was excited by frequency-doubled radiation of a tunable dye laser and resonance-enhanced multiphoton ionization was used to detect the C{sub 2}H (m/z 25), C{sub 2}H{sub 3} (m/z 27), and C{sub 2}H{sub 5} (m/z 29) ions by time-of-flight mass spectroscopy. Spectra obtained at higher nozzle pressures (P{sub 0} > 2.5 atm) indicate formation of clusters. Detailed studies of the VdW complex structure were carried out by analyzing the rotational structure of the respective action spectra. We also performed ab initio theoretical analysis of structures of the VdW complexes and transitional states leading to photodecomposition. We find that the structure of the transition state is significantly different as compared to the equilibrium ground-state structure of the respective complex. The photodecomposition mechanism depends on the hydrocarbon molecule bound to SO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An (e, 2e + ion) study of low-energy electron-impact ionization and fragmentation of tetrahydrofuran with high mass and energy resolutions

We study the low-energy (E{sub 0} = 26 eV) electron-impact induced ionization and fragmentation of tetrahydrofuran using a reaction microscope. All three final-state charged particles, i.e., two outgoing electrons and one fragment ion, are detected in triple coincidence such that the momentum vectors and, consequently, the kinetic energies for charged reaction products are determined. The ionic fragments are clearly identified in the experiment with a mass resolution of 1 amu. The fragmentation pathways of tetrahydrofuran are investigated by measuring the ion kinetic energy spectra and the binding energy spectra where an energy resolution of 1.5 eV has been achieved using the recently developed photoemission electron source. Here, we will discuss the fragmentation reactions for the cations C{sub 4}H{sub 8}O{sup +}, C{sub 4}H{sub 7}O{sup +}, C{sub 2}H{sub 3}O{sup +}, C{sub 3}H{sub 6}{sup +}, C{sub 3}H{sub 5}{sup +}, C{sub 3}H{sub 3}{sup +}, CH{sub 3}O{sup +}, CHO{sup +}, and C{sub 2}H{sub 3}{sup +}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared spectroscopy of mass-selected carbocations

Small carbocations are of longstanding interest in astrophysics, but there are few measurements of their infrared spectroscopy in the gas phase at low temperature. There are fewer-still measurements of spectra across the full range of IR frequencies useful to obtain an IR signature of these ions to detect them in space. We have developed a pulsed-discharge supersonic nozzle ion source producing high densities of small carbocations at low temperatures (50–70K). We employ mass-selected photodissociation spectroscopy and the method of rare gas “tagging”, together with new broadly tunable infrared OPO lasers, to obtain IR spectra for a variety of small carbocations including C{sub 2}H{sub 3}{sup +}, C{sub 3}H{sub 3}{sup +}, C{sub 3}H{sub 5}{sup +}, protonated benzene and protonated naphthalene. Spectra in the frequency range of 600–4500 cm{sup −1} provide new IR data for these ions and evidence for the presence of co-existing isomeric structures (e.g., C{sub 3}H{sub 3}{sup +} is present as both cyclopropenyl and propargyl). Protonated naphthalene has sharp bands at 6.2, 7.7 and 8.6 microns matching prominent features in the UIR spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

PHOTOLYSIS OF ETHYNE IN SOLID NEON AND SYNTHESIS OF LONG-CHAIN CARBON CLUSTERS WITH VACUUM-ULTRAVIOLET LIGHT

The absorption spectrum of ethyne, C{sub 2}H{sub 2}, in solid Ar was measured in the wavelength region 107-220 nm with light from a synchrotron. Based on that absorption, irradiation of samples of ethyne dispersed in neon with vacuum-ultraviolet (VUV) radiation yielded various products that were identified through their infrared absorption spectra including C{sub n} (n = 3-12), C{sub 2}H, C{sub 2}H{sub 3}, C{sub 4}H, C{sub 4}H{sub 2}, C{sub 8}H{sup -}, and C{sub 8}H{sub 2}. The efficiency of photolysis of ethyne and the nature of photoproducts depend on the selected wavelength of VUV light. Information about the photodissociation of C{sub 2}H{sub 2} with various photon energies and the formation and identification of large carbon clusters and hydrides at low temperature might be useful in photochemical models to simulate the composition of the atmosphere of Titan and as a source of aerosols.

79 ASTRONOMY AND ASTROPHYSICS↗

IRRADIATION OF ETHYLENE DILUTED IN SOLID NITROGEN WITH VACUUM ULTRAVIOLET LIGHT AND ELECTRONS: ITS IMPLICATIONS FOR THE FORMATION OF HCN AND HNC

Chemical reactions of C{sub 2}H{sub 4} dispersed in solid nitrogen at 10 K that occur upon irradiation with Lyα light at a wavelength of 121.6 nm and 500 eV electrons were investigated by measuring the infrared absorption spectra. Photolysis of the matrix samples with 121.6 nm light yielded products, including C{sub 2}H{sub 2}, CN, and isomers of C{sub 2}N{sub 2}, as well as a pair of HCN and HNC. In contrast, electron bombardment of similar matrix samples mainly resulted in the generation of N{sub 3}, C{sub 2}H{sub 2}, C{sub 2}H{sub 3}, C{sub 3}H{sub 2}, and C{sub 3}N{sup −}. Mechanisms of the reactions that occur during the photolysis and electron-radiation of the matrix samples are discussed. The results of the study provide insights into the formation of HNC and HCN, as well as nitriles, in N{sub 2}-rich ice samples containing a small proportion of C{sub 2}H{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CRITICAL REVIEW OF N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, And N{sup ++} {sub 2} MAIN PRODUCTION PROCESSES AND REACTIONS OF RELEVANCE TO TITAN'S ATMOSPHERE

This paper is a detailed critical review of the production processes and reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} of relevance to Titan's atmosphere. The review includes neutral, ion-molecule, and recombination reactions. The review covers all possible active nitrogen species under Titan's atmospheric conditions, specifically N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 4} S), N ({sup 2} D), N ({sup 2} P), N{sup +} {sub 2}, N{sup +} ({sup 3} P), N{sup +} ({sup 1} D), N{sup ++} {sub 2}, and N{sup ++} species, and includes a critical survey of the reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} with N{sub 2}, H{sub 2}, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 2}, C{sub 2}H{sub 4}, C{sub 2}H{sub 6}, C{sub 3}H{sub 8} and the deuterated hydrocarbon analogs, as well as the recombination reactions of N{sup +} {sub 2}, N{sup +}, N{sup ++} {sub 2}, and N{sup ++}. Production processes, lifetimes, and quenching by collisions with N{sub 2} of all reactant species are reviewed. The N ({sup 4} S) state is reactive with radicals and its reactions with CH{sub 2}, CH{sub 3}, C{sub 2}H{sub 3}, and C{sub 2}H{sub 5} are reviewed. Metastable states N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 2} D), and N ({sup 2} P) are either reactive or quenched by collisions with the target molecules reviewed. The reactions of N{sup +} ({sup 1} D) have similar rate constants as N{sup +} ({sup 3} P), but the product branching ratios differ significantly. Temperature effects and the role of the kinetic energy content of reactants are investigated. In all cases, experimental uncertainties of laboratory data are reported or estimated. Recommended values with uncertainties, or estimated values when no data are available, are given for rate constants and product branching ratios at 300 K and at the atmospheric temperature range of Titan (150-200 K for neutral reactions and 150 K for ion reactions).

79 ASTRONOMY AND ASTROPHYSICS↗

Diagnosis of PV Cell Antireflective Coating Degradation Resulting From Hot-Humid High-Voltage Potential Aging

Corrosion of the antireflective coating on a photovoltaic cell ("ARc corrosion") has previously been observed in studies using hot-humid test conditions with external high-voltage (HV) bias. This study primarily focuses on known vulnerable legacy aluminum back surface field cells in mini-modules (MiMos) put through comparative stepped stress tests. Each cell type had MiMos at +1500 V, -1500 V, or unbiased ("Voc") potential, which were sequentially subjected to test conditions of 60 degrees C/60% relative humidity (RH) for 96 h, as in International Electrotechnical Commission Technical Specification 62804-1; 70 degrees C/70% RH for 200 h; and 85 degrees C/85% RH for 200 h. Characterizations at each step included visual camera and electroluminescence (EL) imaging, colorimetry, and current-voltage curve tracing. Final characterizations included: Suns-Voc, spatial mapping of external quantum efficiency, high-resolution photoluminescence, EL, and dark lock-in thermography imaging. Forensics were performed on extracted cores, including scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy, and scanning Auger microscopy (SAM). Forensics were also conducted on MiMos from previous studies that underwent stepped HV aging and separate outdoor aged full-sized modules. ARc corrosion was specifically seen for the glass/encapsulant/cell side of the +1500 V (HV+) stressed MiMos and modules. Appearance, color, and reflectance were the most distinguishing characteristics relative to glass corrosion, gridline corrosion and delamination, and other concurrent degradation modes. SEM/EDS and SAM identified the conversion of silicon nitride to hydrated silica, hydrous silica, or hydrated amorphous silica, which preferentially occurred at the edges and tips of the pyramidal textured cell surface.

14 SOLAR ENERGY↗

Self-Adhesive Ionomers for Alkaline Electrolysis: Optimized Hydrogen Evolution Electrode

Hydrogen produced through low-temperature water electrolysis using anion exchange membranes (AEM) combines the benefits of liquid-electrolyte alkaline electrolysis and solid-polymer proton exchange membrane electrolysis. The anion conductive ionomers in the oxygen-producing anode and hydrogen-producing cathode are a critical part of the three-dimensional electrodes. The ionomer in the hydrogen-producing cathode facilitates hydroxide ion conduction from the cathode catalyst to the anode catalyst, and water transport from the anode to the cathode catalyst through the AEM. This ionomer also binds the catalyst particles to the porous transport layer. Here in this study, the cathode durability was improved by use of a self-adhesive cathode ionomer to chemically bond the cathode catalyst particles to the porous transport layer. It was found that the cathode ionomers with high ion exchange capacity (IEC) were more effective than low IEC ionomers because of the need to transport water to the cathode catalyst and transport hydroxide away from the cathode. The cathode durability was improved by using ionomers which were soluble in the spray-coated cathode ink. Optimization of the catalyst and ionomer content within the cathode led to electrolysis cells which were both mechanically durable and operated at low voltage.

08 HYDROGEN↗

Energy Saving Glass Lamination via Selective Radio-Frequency Heating

This Inventions and Innovations program supported the technical and commercial research and development needed to elevate Ceralink's energy saving process for flat glass lamination from bench scale to a self-supporting technology with significant potential for growth. Radio-frequency heating was any un-explored option for laminating glass prior to this program. With significant commercial success through time and energy savings in the wood, paper, and plastics industries, RF heating was found to have significant promise for the energy intensive glass lamination industry. A major technical goal of the program was to demonstrate RF lamination across a wide range of laminate sizes and materials. This was successfully accomplished, dispelling many skeptics' concerns about the abilities of the technology. Ceralink laminated panels up to 2 ft x 3 ft, with four sets processed simultaneously, in a 3 minute cycle. All major categories of interlayer materials were found to work with RF lamination. In addition to laminating glass, other materials including photovoltaic silicon solar cells, light emitting diodes, metallized glass, plastics (acrylic and polycarbonate), and ceramics (alumina) were found compatible with the RF process. This opens up a wide range of commercial opportunities beyond the initially targeted automotive industry. The dramatic energy savings reported for RF lamination at the bench scale were found to be maintained through the scale up of the process. Even at 2 ft x 3 ft panel sizes, energy savings are estimated to be at least 90% compared to autoclaving or vacuum lamination. With targeted promotion through conference presentations, press releases and internet presence, RF lamination has gained significant attention, drawing large audiences at American Ceramic Society meetings. The commercialization success of the project includes the establishment of a revenue-generating business model for providing process development and demonstrations for potential RF lamination users. A path to industrial energy benefits and revenue through industrial equipment sales was established in a partnership with Thermex Thermatron, a manufacturer of RF equipment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Tailored Silicone Network Architecture for Ultimate Mechanical Reinforcement

Hydrosilylation cured silicone elastomers are subject to reaction inefficiency, leading to incomplete and non-uniform crosslink networks, restricting the potential of mechanical reinforcement. This work investigates pre-synthesized, functional PDMS architectures as additives to improve ultimate mechanical performance relative to conventional single-step curing. Three custom, functional structures were prepared: a partially crosslinked PDMS scaffold (Structure A), a bottle-brush PDMS (Structure B), and a star-shaped PDMS derived from an MQ resin (Structure C). Rheological characterization was used to identify the ultimate design space and proper stoichiometric ratio for Structure A, and confirm successful formation of all structures for suitable incorporation into a base silicone formulation at 30wt%. Mechanical tests indicated that all three structures increased in ultimate tensile strength relative to their single-step counterparts, with Structure A providing additional improvements to toughness (432 vs. 258 kJ/m3) and ultimate elongation (158 vs. 115%). Furthermore, Structure B remained very soft in the unfilled state, while Structure C provided hardness (23 vs. 18 Shore A) and stiffness (780 vs. 420 kPa Young’s modulus) increases. In silica filled systems, Structure A retained increased strength but reduced elongation, while Structure B indicated strong reinforcement in terms of strength, toughness, and stiffness. Thermal analysis on the cure profiles of these materials suggested that pre-formation of network architectures enable a more complete reaction than a single-step process (15.9 vs. 15.1 J/g). Ultimately, these results indicate that tailoring PDMS architecture before the final cure can improve ultimate mechanical properties via improved network development in silicone elastomers. Furthermore, this work offers a promising strategy for designing higher-performance, more tunable silicone formulations.

36 MATERIALS SCIENCE↗

Plastic neutron detectors.

This work demonstrated the feasibility and limitations of semiconducting {pi}-conjugated organic polymers for fast neutron detection via n-p elastic scattering. Charge collection in conjugated polymers in the family of substituted poly(p-phenylene vinylene)s (PPV) was evaluated using band-edge laser and proton beam ionization. These semiconducting materials can have high H/C ratio, wide bandgap, high resistivity and high dielectric strength, allowing high field operation with low leakage current and capacitance noise. The materials can also be solution cast, allowing possible low-cost radiation detector fabrication and scale-up. However, improvements in charge collection efficiency are necessary in order to achieve single particle detection with a reasonable sensitivity. The work examined processing variables, additives and environmental effects. Proton beam exposure was used to verify particle sensitivity and radiation hardness to a total exposure of approximately 1 MRAD. Conductivity exhibited sensitivity to temperature and humidity. The effects of molecular ordering were investigated in stretched films, and FTIR was used to quantify the order in films using the Hermans orientation function. The photoconductive response approximately doubled for stretch-aligned films with the stretch direction parallel to the electric field direction, when compared to as-cast films. The response was decreased when the stretch direction was orthogonal to the electric field. Stretch-aligned films also exhibited a significant sensitivity to the polarization of the laser excitation, whereas drop-cast films showed none, indicating improved mobility along the backbone, but poor {pi}-overlap in the orthogonal direction. Drop-cast composites of PPV with substituted fullerenes showed approximately a two order of magnitude increase in photoresponse, nearly independent of nanoparticle concentration. Interestingly, stretch-aligned composite films showed a substantial decrease in photoresponse with increasing stretch ratio. Other additives examined, including small molecules and cosolvents, did not cause any significant increase in photoresponse. Finally, we discovered an inverse-geometric particle track effect wherein increased track lengths created by tilting the detector off normal incidence resulted in decreased signal collection. This is interpreted as a trap-filling effect, leading to increased carrier mobility along the particle track direction. Estimated collection efficiency along the track direction was near 20 electrons/micron of track length, sufficient for particle counting in 50 micron thick films.

36 MATERIALS SCIENCE↗