Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VORTEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Unsteady interaction of a rotor with a vortex

The unsteady, three-dimensional flow field of a helicopter rotor blade encountering a passing vortex is calculated by solving the Euler/thin layer Navier-Stokes equations by a finite-difference numerical procedure. A prescribed vortex method is adopted to preserve the structure of the interacting vortex. The cases considered for computation correspond to the experimental model rotor test conditions of Caradonna, et al. and consist of parallel and oblique interactions. Comparison of the numerical results with test data show good agreement for both parallel and oblique interactions at subsonic and transonic tip speeds.

Srinivasan, G. R.↗

Vortex shedding experiment with flat and curved bluff plates in water

Vortex shedding experiments were conducted in a water flow facility in order to simulate the strong discrete 4000-Hz vibration detected in the Space Shuttle Main Engine (SSME) which is thought to be associated with the SSME LOX inlet tee splitter vanes on the Main Injector. For the case of a flat vane with a blunt trailing edge excited by flow induced vortex shedding, lock-in with the first bending mode of the plate was observed. A curved vane displayed similar behavior, with the lock-in being a more discrete higher amplitude response. Aluminum vanes were employed to decouple the first vane bending mode from the vortex shedding mode. The application of an asymmetric 30-deg trailing edge bevel to both the flat and curved vanes was found to greatly reduce the strength of the shed vortices.

Reed, D.↗

Experimental investigation of the F/A-18 vortex flows at subsonic through transonic speeds

A subsonic-to-transonic speed wind tunnel study has been conducted to deepen understanding of the nature and possibilities for control of vortical flows associated with wing leading edge extensions (LEXs) on the F/A-18 aircraft; these vortical phenomena encompass vortex breakdown and vortex interactions with vertical stabilizers. Wind tunnel results were correlated with in-flight flow visualizations as well as handling-qualities trend data from a USN F-18 with LEX fences to improve the vertical tail buffet environment. Attention is given to the sensitivity of the vortex flows to Re and Mach numbers, reduced vertical tail excitation due to the presence of a LEX fence, and the interpretation of off-body flow visualizations.

Erickson, Gary E.↗

Ozone destruction by chlorine radicals within the Antarctic vortex - The spatial and temporal evolution of ClO-O3 anticorrelation based on in situ ER-2 data

The chemical evolution of the Antarctic vortex region was studied during August 23-September 22, 1987 on the basis of in situ O3 and ClO data collected by the ER-2 aircraft. Particular attention is given to the evolution of the ClO-O3 anticorrelation from the first flight on August 23, 1987, which penetrated well into the vortex, through the course of 10 flights culminating on September 22, 1987. It is concluded that the disappearance of ozone within the Antarctic vortex results from halogen-catalyzed recombination of O3 to molecular oxygen.

Anderson, J. G.↗

Diagnostic studies of the Antarctic vortex during the 1987 Airborne Antarctic Ozone Experiment - Ozone miniholes

Localized rapid reductions in total ozone (miniholes), which were observed during the Airborne Antarctic Ozone Experiment, are studied with particular attention given to meteorological aspects. It is suggested that miniholes are forced by tropospheric weather features and that they are largely reversible distortions to the airflow around the vortex. The relationship between the miniholes and upper tropospheric and lower stratospheric synoptic-scale disturbances is studied. Trajectory calculations are presented which demonstrate the exchange of air from low latitudes with air from within the vortex, with the vortex air subsequently moving to lower latitudes.

Mckenna, D. S.↗

An investigation of counterrotating tip vortex interaction

A tip vortex interaction model originally developed for compressors has been extended and adapted for use with counterrotating open rotors. Comparison of available acoustic data with predictions (made with and without the tip vortex model included) illustrate the importance of this interaction effect. This report documents the analytical modeling, a limited experimental verification, and certain key parametric studies pertaining to the tip vortex as a noise source mechanism for the unsteady loading noise of counterrotating properllers.

Majjigi, R. K.↗

A free surface vortex method with weak viscous effects

The advantage of vortex methods for inviscid flows of several fluids separated by interfaces is that problems of this kind may be posed and solved numerically entirely on the interface surface. For free surface problems, where one of the fluids has negligible inertia, a small amount of viscosity produces a thin, weak rotational layer adjacent to the potential flow vortex sheet. Here, a method is described for including this weak viscous effect as a modification of the boundary conditions for the potential part of the flow, thus allowing this slightly viscous flow to be formulated as a vortex method on the free surface. This is important for unsupported free drops where the viscosity at the free surface is the only source of damping for oscillations, and for gas-filled bubbles, where it provides both drag and damping. Small applied shear stresses from aerodynamic, electrostatic, or other sources may be included provided they are of the same order as the potential flow shear stress or smaller.

Lundgren, T. S.↗

Numerical investigation of the origin of vortex asymmetry

The flow about a slender body of revolution placed at incidence to an oncoming stream is numerically investigated for angles of attack ranging from 20 to 80 degrees and a Reynolds number of 200,000, based on freestream conditions and maximum body diameter. Navier-Stokes computations are applied to investigate the phenomena governing the onset of vortex asymmetry. Time-accurate solutions are given for an ogive-cylinder body with and without a space-fixed time-invariant disturbance added near the tip. At a 40-degree angle of attack the flow is found to be steady but becomes highly asymmetric when the disturbance is added. The level of asymmetry is dependent upon the size and location of the disturbance. It is suggested that the origin of the asymmetry is a convective-type instability of the originally symmetric flow. For higher angles of attack (60 and 80 degrees) the flow around the cylindrical part becomes unsteady, and vortex shedding is observed. It is suggested that the origin of flow unsteadiness and vortex shedding in the wake is an absolute-type instability of the originally steady flow.

Degani, David↗

Blade-vortex interaction experiments - Velocity and vorticity fields

The blade-vortex interaction problem is studied experimentally with laser-Doppler velocimetry. Vortices are generated by pitching a NACA 0012 airfoil about its quarter chord and a target airfoil is mounted two chord lengths downstream of the vortex generator. LDV measurements are obtained in the neighborhood of the target airfoil's leading edge and ensemble-averaged velocity vector fields and vorticity contours are constructed. Vorticity fields are also constructed from velocity time records by assuming that, over short distances, the vorticity propagates with the local velocity. This assumption allows the blade-vortex interaction to be simulated from very few measurements.

Wilder, Michael C.↗

Application of vortex embedding to aircraft flows

A combined Eulerian/Lagrangian 'vortex embedding' method was applied to two cases. The first case involved compressible flow over a realistic fighter aircraft (X-29 fighter) at low angle of attack, for both subsonic and transonic speeds, with shock. Good agreement was obtained for computed wing surface pressures when compared to flight test data. The second case involved incompressible flow over a delta wing with round leading edges at moderate angles of attack. Strong, concentrated vortices were shown to be shed from the leading edge. The vortex embedding method appears to be an efficient solution procedure for cases where well-defined vortex sheets are shed from surfaces.

Steinhoff, John↗

Numerical simulation of the effects of variation of angle of attack and sweep angle on vortex breakdown over delta wings

In the present investigation of the vortical flowfield structure over delta wings at high angles of attack, three-dimensional Navier-Stokes numerical simulations were conducted to predict the complex leeward flowfield characteristics; these encompass leading-edge separation, secondary separation, and vortex breakdown. Attention is given to the effect on solution accuracy of circumferential grid-resolution variations in the vicinity of the wing leading edge, and well as to the effect of turbulence modeling on the solutions. When a critical angle-of-attack was reached, bubble-type vortex breakdown was found. With further angle-of-attack increase, a change from bubble-type to spiral-type vortex breakdown was predicted by the numerical solution.

Ekaterinaris, J. A.↗

Numerical simulations of three-dimensional rotor blade-vortex interactions

A numerical procedure which has been developed (Hassan and Charles, 1989) for the prediction of helicopter blade loads during self-generated blade-vortex interactions (BVI) is described. These BVIs result in significant and frequent impulsive changes in the rotor blade aerodynamic loads and moments that are known to lead to vibrations and severe noise problems. Potential BVIs are identified and tracked in time at even increments of rotor azimuth employing the lifting line helicopter/rotor trim code CAMRAD. The accuracy of the predicted leading edge pressures for self-generated interactions is shown to rely heavily on the user-specified vortex core radius, and more significantly on the CAMRAD-predicted geometry of the interaction vortex elements and their relative orientation with respect to the blade. Thus, the robustness of the surface transpiration approach for modeling subcritical-type BVIs is proven.

Hassan, A. A.↗

Analysis and control of supersonic vortex breakdown flows

Analysis and computation of steady, compressible, quasi-axisymmetric flow of an isolated, slender vortex are considered. The compressible, Navier-Stokes equations are reduced to a simpler set by using the slenderness and quasi-axisymmetry assumptions. The resulting set along with a compatibility equation are transformed from the diverging physical domain to a rectangular computational domain. Solving for a compatible set of initial profiles and specifying a compatible set of boundary conditions, the equations are solved using a type-differencing scheme. Vortex breakdown locations are detected by the failure of the scheme to converge. Computational examples include isolated vortex flows at different Mach numbers, external axial-pressure gradients and swirl ratios.

Kandil, Osama A.↗

Experimental parametric study of jet vortex generators for flow separation control

A parametric wind-tunnel study was performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulence flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and orifice pattern (double row of jets vs. single row). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed). Dye flow visualization tests in a water tunnel indicated that the most effective jet vortex generator configurations produced streamwise co-rotating vortices.

Selby, Gregory↗

Breaking down the delta wing vortex: The role of vorticity in the breakdown process

Experimental x-wire measurements of the flowfield above a 70 and 75 deg flat plate delta wing were performed at a Reynolds number of 250,000. Grids were taken normal to the wing at various chordwise locations for angles of attack of 20 and 30 deg. Axial and azimuthal vorticity distributions were derived from the velocity fields. The dependence of circulation on distance from the vortex core and on chordwise location was also examined. The effects of nondimensionalization in comparison with other experimental data is made. The results indicate that the circulation distribution scales with the local semispan and grows in a nearly linear fashion in the chordwise direction. The spanwise distribution of axial vorticity is severely altered through the breakdown. The axial vorticity components with a negative sense, such as that found in the secondary vortex, seem to remain unaffected by changes in wind sweep or angle of attack, in direct contrast to the positive components. In addition, the inclusion of the local wing geometry into a previously derived correlation parameter allows the circulation of growing leading edge vortex flows to be reduced into a single curve.

Nelson, Robert C.↗

Examination of a vortex-ring interaction phenomenon in an axisymmetric flow

Unsteady separated flow in an axisymmetric configuration is investigated, with the objective of analyzing vortex-ring formation and break-up and the ensuing interactions believed to be leading to breakdown of laminar flow. The model problem considered is an idealized representation of a combustor with a centerbody. Direct solution of the time-dependent incompressible Navier-Stokes equations is employed, with central-differencing for all spatial derivatives, to determine the response of this flow for Re = 2000, 5000 and 10,000. The last case revealed a rather novel unsteady vortex-ring interaction phenomenon. This case has been further investigated using third-order accurate upwind differencing for the convective terms. The flow is interrogated carefully by examining the corresponding instantaneous vorticity, stream-function and velocity fields, as well as by tracking mass-less marker particles in some of the critical regions. Such detailed examination is deemed essential, prior to assigning fundamental physical relevance to the observed vortex-interaction phenomenon.

Ghia, U.↗

Vortex breakdown in a supersonic jet

This paper reports a study of a vortex breakdown in a supersonic jet. A supersonic vortical jets were created by tangential injection and acceleration through a convergent-divergent nozzle. Vortex circulation was varied, and the nature of the flow in vortical jets was investigated using several types of flow visualization, including focusing schlieren and imaging of Rayleigh scattering from a laser light sheet. Results show that the vortical jet mixed much more rapidly with the ambient air than a comparable straight jet. When overexpanded, the vortical jet exhibited considerable unsteadiness and showed signs of vortex breakdown.

Cutler, Andrew D.↗

Experimental analysis of vortex trapping techniques

The use of suction to trap a vortex is investigated experimentally. Vortex trapping using a finite sink and cross-flow obstructions is shown to be viable in the case of low-speed flow over a flat plate airfoil. A dual-fence geometry is found to be more efficient than a backward-facing step due to the greater restriction of vortex movement in the streamwise direction. The backward-facing step geometry provides for an increase in the sink strength required for trapping, while the more efficient dual-fence geometry permits the use of a lower suction force for trapping.

Riddle, Todd W.↗