Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Effects of damping on the control dynamics of the space shuttle based on tethered systems

The analysis of the effects of damping on the control dynamics of the space shuttle based on tethered systems suggest that a relatively simple point mass model can provide useful information concering librational dynamics during development and retrieval of the tethered satellites. The results show that a nonlinear tension control strategy in conjunction with a suitable choice of gains and realistic damping can lead to stable retrieval maneuver with amplitudes in pitch and roll limited to acceptable values. Longitudinal and lateral vibrations of the tether are strongly coupled and can lead to the slackening of the tether. Tether vibrations can be controlled quite effectively by speeding up the retrieval at smaller tether length and/or using thruster.

Modi, V. J.↗

Stabilizing dynamic subsea power cables using Bi-stable nonlinear energy sinks

This study investigates vibration mitigation of dynamic subsea cables through passive bi-stable nonlinear energy sinks (B-NESs). These devices suppress vibration energy in a broadband way, and can be regarded as extensions of classical linear tuned mass dampers (TMDs) which are narrowband devices. Through the open-source MoorDyn library, we simulated the vibrations of a vertical subsea cable equipped with a set of B-NESs. Multi-objective optimization was performed to detect the B-NES parameters for optimal mitigation of the cable vibrations. Advanced signal processing verified the efficacy of the optimized B-NESs not only to rapidly absorb and locally dissipate vibration energy, but also to nonlinearly scatter vibration energy from low to high frequencies within the cable itself. This last feature is especially beneficial for vibration mitigation of the undersea cable, as at higher frequencies the cable vibrations exhibit drastically reduced amplitudes and are more effectively dissipated by inherent structural damping and hydrodynamic radiation damping. This contrasts with traditional TMDs which can mitigate vibration only at a single frequency. Furthermore, our robustness study confirms the B-NES's effectiveness under even varying environmental conditions. Overall, the B-NES's capacity for broadband vibration mitigation renders it a promising retrofit solution for improving the performance and operational safety of dynamic power cables in offshore wind farms and other marine applications.

17 WIND ENERGY↗

Multidisciplinary tailoring of hot composite structures

A computational simulation procedure is described for multidisciplinary analysis and tailoring of layered multi-material hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loads. The effect of aggressive environments is also simulated. The simulation is based on a three-dimensional finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermo-mechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loads lead to different tailored designs, even those competing with each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

Singhal, Surendra N.↗

Isotope dependent, temperature regulated, energy repartitioning in a low-barrier, short-strong hydrogen bonded cluster

We investigate and analyze the vibrational properties, including hydrogen/deuterium isotope effects, in a fundamental organic hydrogen bonded system using multiple experimental (infrared multiple photon dissociation and argon-tagged action spectroscopy) and computational techniques. We note a qualitative difference between the two experimental results discussed here and employ ab initio molecular dynamics simulations to explain these results. A deeper understanding of the differences between the isotopically labeled systems arises from an analysis of the simulated cluster spectroscopy and leads to a system-bath coupling interpretation. Specifically, when a few active modes, involving the shared hydrogen/deuterium stretch, are identified and labeled as “system,” with all other molecular vibrational modes being identified as “bath” modes, we find critical differences in the coupling between the system modes for the shared proton and shared deuteron cases. These differences affect the energy repartitioning between these modes resulting in a complex spectral evolution as a function of temperature. Furthermore, intensity borrowing across modes that are widely distributed in the frequency domain plays an important role on the simulated spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrodynamic and Structural Response Modeling of a Prototype Floating Membrane Reservoir System for Pumped Storage Hydropower

Hydrodynamic, computational fluid dynamics, and finite-element modeling were performed for a novel floating membrane reservoir system design for closed-loop pumped storage hydropower application. The conceptual design, which is now protected under an invention disclosure with a patent pending, offers a potential low-cost, low-impact solution to address the high costs, long investment return periods, and environmental disruptions encountered with traditional pumped storage development while offering modularity to enable replication at many locations. Prior to physical tests on a prototype, this paper documents the response analysis and modeling completed to simulate hydraulic and structural performance under different reservoir deployment and alignment arrangements, evaluate system stability, and refine the conceptual design. The results indicate that the excitation frequency from vortex shedding is at least an order of magnitude lower than the water sloshing frequencies in the reservoir, the structural natural frequency of the entire reservoir, and the vibrational frequencies of the side membranes, although excitation frequencies from other sources could cause mechanical resonance under certain conditions. To control destabilizing effects and prevent rocking motion and vibration, the authors conclude that the design could be improved by including a support structure around the floating reservoir, which could also provide floating-membrane containment, improve safety, and facilitate vertical reservoir movement. These conclusions, based on hydrodynamic and structural response modeling, help define specifications for upcoming full-scale prototype construction, deployment, and testing. This study demonstrates standard modeling technique application to an innovative design for which similar applications have not been previously evaluated. As a result, the refined design is capable of improving the scalability and feasibility of pumped storage hydropower in the United States and will be considered for commercialization following prototype testing.

13 HYDRO ENERGY↗

Study of infrared emission spectroscopy for the B{sup 1}Δ{sub g}–A{sup 1}Π{sub u} and B{sup ′1}Σ{sub g}{sup +}–A{sup 1}Π{sub u} systems of C{sub 2}

Thirteen bands for the B{sup 1}Δ{sub g}–A{sup 1}Π{sub u} system and eleven bands for the B{sup ′1}Σ{sub g}{sup +}–A{sup 1}Π{sub u} system of C{sub 2} were identified in the Fourier transform infrared emission spectra of hydrocarbon discharges. The B{sup ′1}Σ{sub g}{sup +} v = 4 and the B{sup 1}Δ{sub g} v = 6, 7, and 8 vibrational levels involved in nine bands were studied for the first time. A direct global analysis with Dunham parameters was carried out satisfactorily for the B{sup 1}Δ{sub g}–A{sup 1}Π{sub u} system except for a small perturbation in the B{sup 1}Δ{sub g} v = 6 level. The calculated rovibrational term energies up to B{sup 1}Δ{sub g} v = 12 showed that the level crossing between the B{sup 1}Δ{sub g} and d{sup 3}Π{sub g} states is responsible for many of the prominent perturbations in the Swan system observed previously. Nineteen forbidden transitions of the B{sup 1}Δ{sub g}–a{sup 3}Π{sub u} transition were identified and the off-diagonal spin-orbit interaction constant A{sub dB} between d{sup 3}Π{sub g} and B{sup 1}Δ{sub g} was derived as 8.3(1) cm{sup −1}. For the B{sup ′1}Σ{sub g}{sup +}–A{sup 1}Π{sub u} system, only individual band analyses for each vibrational level in the B′{sup 1}Σ{sub g}{sup +} state could be done satisfactorily and Dunham parameters obtained from these effective parameters showed that the anharmonic vibrational constant ω{sub e}x{sub e} is anomalously small (nearly zero). Inspection of the RKR (Rydberg-Klein-Rees) potential curves for the B{sup ′1}Σ{sub g}{sup +} and X{sup 1}Σ{sub g}{sup +} states revealed that an avoided crossing or nearly avoided crossing may occur around 30 000 cm{sup −1}, which is responsible for the anomalous molecular constants in these two states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of an inductively coupled nitrogen-argon plasma by Langmuir probe combined with optical emission spectroscopy

The properties of low-pressure inductively coupled nitrogen-argon plasmas were investigated by using a Langmuir probe combined with optical emission spectroscopy (OES) under the conditions of pressures in the range of 1-30 mTorr and applied rf powers of 200-600 W. In the experiments, the argon was introduced as an actinometer and as an adding gas. The effect of the argon content in the gas mixture was examined in the range of 5%-80%. The electron energy probability function (EEPF), the electron density, and the electron temperature were obtained by using an rf-compensated Langmuir probe. The dissociation fractions were obtained from the OES actinometry. The electron temperature was also obtained by OES corona model and compared with that measured by the probe. The second positive and first negative systems of spectral bands from nitrogen molecules were analyzed to estimate the vibrational and rotational temperatures. The effects of the control parameters on the plasma parameters and dissociation fraction were investigated. While the calculated nitrogen atom density increased with power, it exhibited a maximum value near the Ar content of 30%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Higher Efficiency, Demand Flexible Refrigerator with On-Demand Micro-Vibrational De-icing Technology

Refrigerator technology has advanced significantly over the last couple of decades. Today’s refrigerators use only about 25% of the energy that was required to power models built in 1975. Even as they continually improve efficiency to meet standards, refrigerators have increased in size by almost 20%, added energy-consuming features such as through-the-door ice, and provide more benefits than ever before. However, a few challenges and technology gaps are preventing further improvement of the demand responsiveness and efficiency of the refrigerators. One of the major technology gaps in existing refrigerators is their outdated de-icing process. When the evaporator generates frost, an old-fashioned resistive heating element melts the ice. Most refrigerators have a timed defrost cycle, rather than an active system that could monitor the state of the frost. In these systems, not only is the precious electricity used at its least efficient form of conversion (direct conversion of electricity to heat), but also all the latent heat associated with the ice is wasted during the melting process. On top of that, the refrigerator needs to work harder to pull the temperature down after defrosting, and, last but not least, the food quality is severely impacted by the temperature swings during the defrost cycle. According to a study, the EU alone wastes 89 million tons of food in the supply chain every year. Any temperature swing during defrosting (about 6F according to Emerson for low-temperature cases) can negatively impact the shelf life of meat and other products for multiple days. All these issues can happen during the peak demand time of the electric grid. Unlike the conventional systems, the proposed novel advanced micro-vibrational deicing process uses no heat for defrosting. Instead, it uses the micro vibrations generated by a piezoelectric or vibration-generating module to mechanically break ice from the heat exchanger almost instantaneously. The project titled “Higher Efficiency, Demand Flexible Refrigerator with On-Demand Micro-Vibrational De-icing Technology, performed by Ultrasonic Technology Solutions, LLC (UTS) of Knoxville, TN, in collaboration with Emerson (now Copeland), represents the final phase of a multi-year effort funded under the U.S. Department of Energy’s Building Technologies Office (BTO) BENEFIT FOA 2020. Initiated on October 1, 2021, and completed after a nine-month no-cost extension ending September 30, 2025, this project aimed to develop and validate a novel micro-vibrational mechanical defrosting system, achieving more than 25% improvement in defrosting energy efficiency over conventional baseline defrosting technologies. Over sixteen quarters, the project advanced from fundamental ice-mechanical characterization and prototype development to full-scale system integration and validation. Initial efforts established project management infrastructure and characterized ice adhesion properties, followed by the design and fabrication of early aluminum-based prototypes for resonance frequency testing. Subsequent quarters saw rapid technical progression, including the identification of optimal piezoelectric and motor-based vibration mechanisms, the demonstration of effective de-icing over 6x6-inch aluminum surfaces. The team achieved its Go/No-Go milestone by exceeding the 25% energy-efficiency improvement target—reaching up to 3,340% under optimized conditions—and later confirmed that motor-driven systems offered superior performance and energy efficiency compared to piezoelectric alternatives. Continued refinement led to the development of amplifier systems on printed circuit boards, improved control and instrumentation hardware, and integration into full-scale heat exchanger (HX) prototypes at both UTS and Copeland facilities. Multiple vibration-mounting studies and frost-growth experiments guided mechanical optimization and noise-mitigation strategies, achieving a 17.5 dB reduction in sound pressure level and verifying robust mechanical performance. Advanced analyses, including modal and harmonic simulations, established a quantitative understanding of vibrational behavior and de-icing efficiency across >1000 cm² systems. The final project phase successfully demonstrated scalable integration within reach-in and chest freezer prototypes, confirmed >25% efficiency improvements in large-area systems, and completed a comprehensive business model and scale-up strategy identifying electric defrost systems as the primary beachhead market. The culmination of this DOE-supported effort establishes micro-vibrational defrosting as a viable, high-efficiency, low-noise, and demand-flexible de-icing technology, paving the way for commercial deployment and broader application in next-generation refrigeration systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Rovibronic structure in slow photoelectron velocity-map imaging spectroscopy of CH{sub 2}CN{sup −} and CD{sub 2}CN{sup −}

We report high-resolution anion photoelectron spectra of the cryogenically cooled cyanomethide anion, CH{sub 2}CN{sup −}, and its isotopologue, CD{sub 2}CN{sup −}, using slow photoelectron velocity-map imaging (SEVI) spectroscopy. Electron affinities of 12 468(2) cm{sup −1} for CH{sub 2}CN and 12 402(2) cm{sup −1} for CD{sub 2}CN are obtained, demonstrating greater precision than previous experiments. New vibrational structure is resolved for both neutral species, especially activity of the ν{sub 5} hydrogen umbrella modes. The ν{sub 6} out-of-plane bending mode fundamental frequency is measured for the first time in both systems and found to be 420(10) cm{sup −1} for CH{sub 2}CN and 389(8) cm{sup −1} for CD{sub 2}CN. Some rotational structure is resolved, allowing for accurate extraction of vibrational frequencies. Temperature-dependent SEVI spectra show marked effects ascribed to controlled population of low-lying anion vibrational levels. We directly measure the inversion splitting between the first two vibrational levels of the anion ν{sub 5} umbrella mode in both species, finding a splitting of 130(20) cm{sup −1} for CH{sub 2}CN{sup −} and 81(20) cm{sup −1} for CD{sub 2}CN{sup −}. Franck-Condon forbidden activity is observed and attributed to mode-specific vibrational autodetachment from the CH{sub 2}CN{sup −} and CD{sub 2}CN{sup −} dipole bound excited states. We also refine the binding energy of the anion dipole bound states to 39 and 42 cm{sup −1}, respectively, for CH{sub 2}CN{sup −} and CD{sub 2}CN{sup −}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: Imaging the effects of the antisymmetric-stretching excitation in the O({sup 3}P) + CH{sub 4}(v{sub 3} = 1) reaction

Effects of one-quantum excitation of the antisymmetric-stretching mode of CH{sub 4}(v{sub 3} = 1) on the O({sup 3}P) + CH{sub 4} reaction were studied in a crossed-beam, ion-imaging experiment. In the post-threshold region, we found that (1) the product state distributions are dominated by the CH{sub 3}(0{sub 0}) + OH(v{sup ′} = 1) pair, (2) the product angular distributions extend toward sideways from the backward dominance of the ground-state reaction, and (3) vibrational excitation exerts a positive effect on reactivity, but translational energy is more efficient in promoting the rate of this central-barrier reaction. All major findings agree reasonably well with recent theoretical results. Some remaining questions are pointed out.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental implementation of the modified independent modal space control method

An experimental realization of a modified independent modal space control (MIMSC) method to control the vibration of a flexible cantilevered beam is presented. In its operation the method relies on the use of one piezoelectric actuator to control several vibration modes through a time-sharing strategy. The effectiveness of the MIMSC method in damping out the beam vibration is demonstrated by comparing the results with those obtained by other modal control methods. Two methods are considered, the independent modal space control method and the pseudo-inverse method. The feasibility of the MIMSC method as a viable alternative for controlling large flexible structures with a very small number of actuators is emphasized.

Baz, A.↗

Blade-Mounted Flap Control for BVI Noise Reduction Proof-of-Concept Test

This report describes a wind tunnel test of the McDonnell Douglas Helicopter Systems (MDHS) Active Flap Model Rotor at the NASA Langley 14- by 22-Foot Subsonic Tunnel. The test demonstrated that BVI noise reductions and vibration reductions were possible with the use of an active flap. Aerodynamic results supported the acoustic data trends, showing a reduction in the strength of the tip vortex with the deflection of the flap. Acoustic results showed that the flap deployment, depending on the peak deflection angle and azimuthal shift in its deployment schedule, can produce BVI noise reductions as much as 6 dB on the advancing and retreating sides. The noise reduction was accompanied by an increase in low frequency harmonic noise and high frequency broadband noise. A brief assessment of the effect of the flap on vibration showed that significant reductions were possible. The greatest vibration reductions (as much as 76%) were found in the four per rev pitching moment at the hub. Performance improvement cam results were inconclusive, as the improvements were predicted to be smaller than the resolution of the rotor balance.

Dawson, Seth↗

Confined lattice dynamics of single and quadruple SnSe bilayers in [(SnSe) 1.04 ] m [MoSe 2 ] n ferecrystals

The Sn specific densities of phonon states in the SnSe subunits of [(SnSe) 1.04 ] m [MoSe 2 ] n ferecrystals with (m,n) = (1,1), (4,1) and in bulk SnSe were derived from nuclear inelastic scattering by the 119 Sn M ssbauer resonance. When using different measurement configurations, phonons with polarization parallel and perpendicular to the ferecrystal plane were specifically probed. Vibrational properties and phonon spectral weight are found to strongly depend on the phonon polarization and layer count m. Moreover, a highly peculiar feature of these ferecrystal densities of phonon states is the emergence of rather sharp high energy vibrational modes polarized perpendicular to the ferecrystal plane, which contrasts with usual findings in thin layered structures and nanostructured materials in general, and a depletion of modes with a gap appearing between acoustic and high energy modes. The spectral weight of these phonons depends on the overall SnSe content, m, but cannot be unambiguously attributed to SnSe MoSe 2 interfaces. Considering the low energy part of lattice dynamics, ferecrystals exhibit rather low average phonon group velocities as compared to the speed of sound in the long wavelength limit. For the (1,1) ferecrystal, this effect is most pronounced for vibrations polarized in the ferecrystal plane. Therefore, an experimental microscopic origin for the vibrational and bonding anisotropy in subunits of ferecrystals is provided.

36 MATERIALS SCIENCE↗

Quelling Cabin Noise in Turboprop Aircraft via Active Control

Cabin noise in turboprop aircraft causes passenger discomfort, airframe fatigue, and employee scheduling constraints due to OSHA standards for exposure to high levels of noise. The noise levels in the cabins of turboprop aircraft are typically 10 to 30 decibels louder than commercial jet noise levels. However. unlike jet noise the turboprop noise spectrum is dominated by a few low frequency tones. Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The goal is to determine the force inputs and locations for the piezoceramic actuators so that: (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. Computational experiments for data taken from a computer generated model and from a laboratory test article at NASA Langley Research Center are provided.

Kincaid, Rex K.↗

Entanglement Effect and Angular Momentum Conservation in a Nonseparable Tunneling Treatment

The important, and often dominant, role of tunneling in low temperature kinetics has resulted in numerous theoretical explorations into the methodology for predicting it. Nevertheless, there are still key aspects of the derivations that are lacking, particularly for nonseparable systems in the low temperature regime, and further explorations of the physical factors affecting the tunneling rate are warranted. In this work we obtain a closed-form rate expression for the tunneling rate constant that is a direct analog of the rigid-rotor-harmonic-oscillator expression. This expression introduces a novel "entanglement factor" that modulates the reaction rate. Furthermore, we are able to extend this expression, which is valid for nonseparable systems at low temperatures, to properly account for the conservation of angular momentum. In contrast, previous calculations have considered only vibrational transverse modes and so effectively employ a decoupled rotational partition function for the orientational modes. We also suggest a simple theoretical model to describe the tunneling effects in the vicinity of the crossover temperature (the temperature where tunneling becomes the dominating mechanism). This model allows one to naturally classify, interpret, and predict experimental data. Among other things, it quantitatively explains in simple terms the so-called "quantum bobsled" effect, also known as the negative centrifugal effect, which is related to curvature of the reaction path. Taken together, the expressions obtained here allow one to predict the thermal and E-resolved rate constants over broad ranges of temperatures and energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Free in-plane vibration of circular arches.

Numerical data are presented for the natural frequencies and modes of vibration of hinged and fixed, uniform, circular arches vibrating in their own plane, and the effects of the various parameters affecting the response are analyzed. It is shown that the vibrational modes may be almost purely flexural, or almost purely extensional, or the extensional and flexural actions may be strongly coupled. The conditions of occurrence of each type of behavior are defined, and simple approximate formulas are derived; using these formulas, the free vibrational characteristics of arches may be estimated to a satisfactory degree of accuracy for most practical applications. The approach used to derive the approximate formulas may also be applied to arches having other boundary conditions, shapes, or distributions of stiffness and mass.

Veletsos, A. S.↗

Determination of the effects of heating on modal characteristics of an aluminum plate with application to hypersonic vehicles

The structural integrity of proposed high speed aircraft can be seriously affected by the extremely high surface temperatures and large temperature gradients throughout the vehicle's structure. Variations in the structure's elastic characteristics as a result of thermal effects can be seen by changes in vibration characteristics. Analysis codes that predict these changes must be correlated and verified with experimental data. Analytical and experimental modal test results are given from uniform, nonuniform, and transient thermoelastic vibration tests of a 12 x 50 x 0.19 aluminum plate. The data show the effect of heat on the modal characteristics of the plate. The results showed that frequencies decreased, damping increased, and mode shapes remained unchanged as the temperature of the plate increased. Analytical predictions provided good correlation with experimental results.

Snyder, H. Todd↗

Carbon Nanotubes Based Quantum Devices

This document represents the final report for the NASA cooperative agreement which studied the application of carbon nanotubes. The accomplishments are reviewed: (1) Wrote a review article on carbon nanotubes and its potentials for applications in nanoscale quantum devices. (2) Extensive studies on the effects of structure deformation on nanotube electronic structure and energy band gaps. (3) Calculated the vibrational spectrum of nanotube rope and the effect of pressure. and (4) Investigate the properties of Li intercalated nanotube ropes and explore their potential for energy storage materials and battery applications. These studies have lead to four publications and seven abstracts in international conferences.

Lu, Jian-Ping↗