Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VELOCITY MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Premixed flames subjected to extreme turbulence: Some questions and recent answers

It has been predicted that several changes will occur when premixed flames are subjected to the extreme levels of turbulence that can be found in practical combustors. Our report is a review of recent experimental and DNS results that have been obtained for the range of extreme turbulence, and it includes a discussion of cases that agree or disagree with predictions. “Extreme turbulence” is defined to correspond to a turbulent Reynolds number (Re Τ , based on integral scale) that exceeds 2800 or a turbulent Karlovitz number that exceeds 100, for reasons that are discussed in Section 2.1. Several data bases are described that include measurements made at Lund University, the University of Sydney, the University of Michigan and the U.S. Air Force Research Lab. The data bases also include DNS results from Sandia National Laboratory, the University of New South Wales, Newcastle University, the California Institute of Technology and the University of Cambridge. Several major observations are: (a) DNS now can be achieved for a realistic geometry (of the Lund University jet burner) even for extreme turbulence levels, (b) state relations (conditional mean profiles) from DNS and experiments do tend to agree with laminar profiles, at least for methane-air and hydrogen-air reactants that are not preheated, and (c) regime boundaries have been measured and they do not agree with predicted boundaries. Results indicate that the range of conditions for which flamelet models should be valid is larger than what was previously believed. Additional parameters have been shown to be important; for example, broken reactions occur if the “back-support” is insufficient due to the entrainment of cold gas into the product gas. Turbulent burning velocity measurements have been extended from the previous normalized turbulence levels (u’/S L ) of 24 up to a value of 163. Turbulent burning velocities no longer follow the trend predicted by Shchelkin but they tend to follow the trend predicted by Damköhler. The boundary where flamelet broadening begins was measured to occur at Re Taylor = 13.8, which corresponds to an integral scale Reynolds number (Re T ) of 2800. This measured regime boundary can be explained by the idea that flame structure is altered when the turbulent diffusivity at the Taylor scale exceeds a critical value, rather than the idea that changes occur when Kolmogorov eddies just fit inside a flamelet. A roadmap to extend DNS to complex chemistry and to higher Reynolds numbers is discussed. Exascale computers, machine learning, adaptive mesh refinement and embedded DNS show promise. Some advances are reviewed that have extended the use of line and planar PLIF and CARS laser diagnostics to studies that consider complex hydrocarbon fuels and harsh environments.

42 ENGINEERING↗

Evaluation of a self-aspirating local total enthalpy probe in a low-density arc-heated hypersonic wind tunnel

A shock-swallowing, self-aspirating, local total enthalpy probe has been evaluated in a low density nonequilibrium, hypervelocity airstream. The probe, which incorporated an air gap to separate the internal and external cooling passages, was tested in an electric archeated wind tunnel at an average Mach number of 11.7 and an average Reynolds number per meter of 57,000. The free stream enthalpy probe data are compared with bulk calorimeter measurements of total enthalpy at the beginning of the gas expansion and with local total enthalpy inferred from a theoretical nonequilibrium gas expansion model by using free stream velocity measurements obtained from a mass flow probe. The three techniques are in relative agreement at the lower enthalpies. However, at the higher enthalpies, the enthalpy probe data lie considerably below the other data. This low data may be caused by the chemical and vibrational energy frozen in the flow not being sensed by the probe. Other problems associated with the shock-swallowing total enthalpy probe are discussed, and recommendations for improving the probe performance are presented.

Guy, R. W.↗

Three-dimensional turbulent-mixing-length modeling for discrete-hole coolant injection into a crossflow

Three dimensional mixing length models of a flow field immediately downstream of coolant injection through a discrete circular hole at a 30 deg angle into a crossflow were derived from the measurements of turbulence intensity. To verify their effectiveness, the models were used to estimate the anisotropic turbulent effects in a simplified theoretical and numerical analysis to compute the velocity and temperature fields. With small coolant injection mass flow rate and constant surface temperature, numerical results of the local crossflow streamwise velocity component and surface heat transfer rate are consistent with the velocity measurement and the surface film cooling effectiveness distributions reported in previous studies.

Wang, C. R.↗

1H 0709-360 - A cataclysmic variable with an orbital period inside the 'period gap'

The discovery is reported of the second cataclysmic variable with a binary period lying well inside the nominal 2-3 hr period gap. The object, 1H 0709-360, is an X-ray source which has been identified on the basis of positional data from the instruments of the HEAO 1 survey. The X-ray source was also detected by the Uhuru and Ariel 5 surveys. Multicolor photometry has revealed eclipsing behavior at an orbital period of 2.444 hr. Radial velocity measurements show modulations at the same period, with an offset between the spectroscopic and photometric conjunctions. Both the eclipse profile and a clear rotational disturbance in the radial velocities of emission lines during eclipse provide unambiguous evidence for the existence of an accretion disk. Thus the object cannot be an AM Herculis variable, a conclusion supported by the absence of circular polarization. Instead, the evidence suggests that the object could be a DQ Herculis magnetic variable that is close to synchronism. The evolutionary implications of this rare object are discussed.

Tuohy, I. R.↗

NASA/LMSC instrument design and fabrication

The topics addressed are: (1) class-10 flight test program; (2) class system requirements; (3) Doppler wind velocity measurement; (4) systems specifications rational; (5) signal-to-noise equation for remote atmospheric sensing laser velocimeter; (6) variation of signal-to-noise ratios and true wind velocity with distance; (7) velocity error as a function of signal-to-noise ratio, with turbulence; and (8) final class optomechanical design on NASA B/737.

Targ, Russel↗

Three dimensional flow field measurements of a 4:1 aspect ratio subsonic jet

Flow field measurements for a subsonic rectangular cold air jet with an aspect ratio of 4:1 (12.7 x 50.8 mm) at a Mach number of 0.09 and Re of 100,000 have been carried out using a three-dimensional laser Doppler anemometer system. Mean velocity measurements show that the jet width spreads more rapidly along the minor axis than along the major axis. The outward velocities, however, are not significantly different for the two axes, indicating the presence of enhanced mixing along the minor axis. The jet slowly changes from a rectangular jet to a circular jet as the flow progresses downstream.

Morrison, G. L.↗

Towards Simultaneous Multi-Parameter Measurements Using Burst-Mode Frequency-Scanning Planar Laser-Induced Fluorescence

While planar laser-induced fluorescence (PLIF) can provide valuable flow visualization, there are many challenges in extracting quantitative measurements from the fluorescence intensity. To overcome the multi-parameter dependence of the signal intensity, frequency scanning planar laser-induced fluorescence (FS-PLIF) provides the potential for 2D temperature, pressure, and velocity measurements by spectrally resolving the excitation spectrum of one or more fluorescence transitions to extract the Doppler shift, Doppler- and collisional-broadening of absorption lines, and the relative signal intensities of multiple transitions. This work aims to characterize a burst-mode FS-PLIF system consisting of a Spectral Energies, LLC burst-mode laser coupled with a Spectral Energies, LLC optical parametric oscillator using nitric oxide (NO) static pressure cell measurements. The effect of the OPO cavity on intensity fluctuations during frequency-scanning is investigated. A NO PLIF model is implemented to investigate the feasibility of property measurements using single- and two-NO-line scans.

burst-mode laser↗

Fracture Mechanics Properties of Fused Silicas Used for International Space Station Windowpanes

The fracture toughness and slow crack growth (SCG) parameters of a quartz-based silica and a high-purity fused silica were measured as part of a program to review the reliability of the International Space Station windows. The materials exhibit the same fracture toughness (.75 MPa m^(1/2) in N2) and very similar SCG parameters. The literature on fused silica indicates excellent agreement of fracture toughness, but a very wide range of SCG parameters, even from the same institution, with strength-based methods usually yielding a lower power law exponent than direct crack velocity measurements. Use of the exponential function is shown to provide better agreement between test methods, with velocity curves derived from strength tests of bare fiber and polished or ground test specimens paralleling those from wide-range, direct crack velocity observations, implying that constant stress rate tests can predict long lifetime via the exponential function. However, much variation still exists. SCG parameters for soda–lime silicate are much less sensitive to the test method than fused silica. Static load tests and stress intensity measurements resulted in a fatigue threshold of .3 MPa m^(1/2) for fused silica.

Silica, toughness, impact, crack growth, windows, ↗

Hot-wire measurements of a single lateral jet injected into swirling crossflow

In the present experiments documenting the time-mean and turbulent flowfield of a deflected turbulent jet in a combined, swirling crossflow, attention is given to a jet-to-crossflow velocity ratio of 4 at swirler vane angles of 45 and 70 deg. The results obtained are presented in the form of r-x plots in order to aid in three-dimensional flowfield visualization. The time-mean velocity measurements were found to closely correspond to pitot-probe data obtained in identical flow conditions. The lateral jet was found to deflect the axis of the precessing vortex core.

Lilley, D. G.↗

MOST DETECTS TRANSITS OF HD 97658b, A WARM, LIKELY VOLATILE-RICH SUPER-EARTH

Through photometric monitoring of the extended transit window of HD 97658b with the MOST space telescope, we have found that this exoplanet transits with an ephemeris consistent with that predicted from radial velocity measurements. The mid-transit times are 5.6{sigma} earlier than those of the unverified transit-like signals reported in 2011, and we find no connection between the two sets of events. The transit depth together with our determined stellar radius (R{sub *} = 0.703{sub -0.034}{sup +0.039} R{sub Sun }) indicates a 2.34{sup +0.18}{sub -0.15} R{sub Circled-Plus} super-Earth. When combined with the radial velocity determined mass of 7.86 {+-} 0.73 M{sub Circled-Plus }, our radius measure allows us to derive a planet density of 3.44{sup +0.91}{sub -0.82} g cm{sup -3}. Models suggest that a planet with our measured density has a rocky core that is enveloped in an atmosphere composed of lighter elements. The star of the HD 97658 system is the second brightest known to host a transiting super-Earth, facilitating follow-up studies of this not easily daunted, warm and likely volatile-rich exoplanet.

79 ASTRONOMY AND ASTROPHYSICS↗

3D RECONNECTION AND FLOW DYNAMICS IN THE SSX EXPERIMENT

Several new experimental results are reported from plasma merging studies at the Swarthmore Spheromak Experiment (SSX) with relevance to collisionless three-dimensional magnetic reconnection in laboratory and space plasmas. First, recent high-resolution velocity measurements of impurity ions using ion Doppler spectroscopy (IDS) show bi-directional outflow jets at 40 km/s (nearly the Alfven speed). The SSX IDS instrument measures with 1 mus or better time resolution the width and Doppler shift of the C{sub III} impurity (H plasma) 229.7 nm line to determine the temperature and line-averaged flow velocity during spheromak merging events. High flow speeds are corroborated using an in situ Mach probe. Second, ion heating to nearly 10{sup 6} K is observed after reconnection events in a low-density kinetic regime. Transient electron heating is inferred from bursts on a 4-channel soft x-ray array as well as vacuum ultraviolet spectroscopy. Third, the out-of-plane magnetic field and the in-plane Lorentz force in a reconnection volume both show a quadrupolar structure at the ion inertial scale (c/omega{sub pi}). Time resolved vector magnetic field measurements on a 3D lattice B(r, t)) enables this measurement. Earlier work at SSX has shown that formation of three-dimensional structure at the ion inertial scale is temporally and spatially correlated with the observation of superthermal, super-Alfvenic ions accelerated along the X-line normal to the local 2D plane of reconnection. Each of these measurements will be related to and compared with similar observations in a solar or space context. Keywords: spheromak, flow, heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE SIX-YEAR PERIOD IN THE RADIAL VELOCITY OF ANTARES A

We examine the century-long historical data and compare it with our new radial-velocity measurements to determine an improved period. We find a period of 2167 {+-} 5 days (5.93 {+-} 0.01 years). Both orbital motion and pulsation are considered as possible causes of the velocity variation. Temperature variations we deduce from line-depth ratios support the pulsation hypothesis. A temperature minimum occurs in 2009, 70 days after the radial-velocity minimum. We deduce a radius change of 19% {+-} 4% from an integration of the radial-velocity curve and predict a visual magnitude variation {approx}0.2 from the radius and temperature variation.

79 ASTRONOMY AND ASTROPHYSICS↗

KEPLER-10 c: A 2.2 EARTH RADIUS TRANSITING PLANET IN A MULTIPLE SYSTEM

The Kepler mission has recently announced the discovery of Kepler-10 b, the smallest exoplanet discovered to date and the first rocky planet found by the spacecraft. A second, 45 day period transit-like signal present in the photometry from the first eight months of data could not be confirmed as being caused by a planet at the time of that announcement. Here we apply the light curve modeling technique known as BLENDER to explore the possibility that the signal might be due to an astrophysical false positive (blend). To aid in this analysis we report the observation of two transits with the Spitzer Space Telescope at 4.5 {mu}m. When combined, they yield a transit depth of 344 {+-} 85 ppm that is consistent with the depth in the Kepler passband (376 {+-} 9 ppm, ignoring limb darkening), which rules out blends with an eclipsing binary of a significantly different color than the target. Using these observations along with other constraints from high-resolution imaging and spectroscopy, we are able to exclude the vast majority of possible false positives. We assess the likelihood of the remaining blends, and arrive conservatively at a false alarm rate of 1.6 x 10{sup -5} that is small enough to validate the candidate as a planet (designated Kepler-10 c) with a very high level of confidence. The radius of this object is measured to be R{sub p} = 2.227{sup +0.052}{sub -0.057} R{sub +} (in which the error includes the uncertainty in the stellar properties), but currently available radial-velocity measurements only place an upper limit on its mass of about 20 M{sub +}. Kepler-10 c represents another example (with Kepler-9 d and Kepler-11 g) of statistical 'validation' of a transiting exoplanet, as opposed to the usual 'confirmation' that can take place when the Doppler signal is detected or transit timing variations are measured. It is anticipated that many of Kepler's smaller candidates will receive a similar treatment since dynamical confirmation may be difficult or impractical with the sensitivity of current instrumentation.

79 ASTRONOMY AND ASTROPHYSICS↗

Data for: Ultrasonic characterization of material heterogeneities in stainless steel parts fabricated by powder bed fusion

These are the raw ultrasonic waveform files and nanoindentation measurements for three additively manufactured 316L stainless steel components with different fabrication parameters. Each part's length is divided into four segmented regions where their fabrication energy densities change. Part V+ begins at 33 J/mm^3 and increases in energy density by 3 J/mm^3 with each segment. Part C remains at a constant 33 J/mm^3 throughout the part. Part V- begins at 33 J/mm^3 and decreases in energy density by 3 J/mm^3 with each segment. We have found that the ultrasonic waves in regions with higher energy densities will traverse more quickly, as shown by the shorter time of flight, and vice versa. Similarly, nanoindentation measurements of reduced modulus and hardness follow this trend. We have measured the direction in which the parts were fabricated (build direction) and the segmented regions that are perpendicular to the build direction (transverse directions). The build direction longitudinal wave velocity measurements are considerably lower than their transverse direction counterparts, indicating anisotropy between the two directions. In Part C, we have removed material from one of its surfaces and recorded its ultrasonic and nanoindentation measurements with each material removal iteration. Changes in the material properties are more prominent by nanoindentation, suggesting material heterogeneity between the part's surface and interior. The README.txt file has information on how to navigate the files and process the data.

Anisotropy↗

Measurement capabilities of a one-dimensional LDV system

The capability is investigated of a single component laser Doppler velocimeter (LDV) system for the measurement of three dimensional mean and turbulent flow statistics. Sets of general equations defining the parameters measured by a single component LDV system are derived. Solutions to the equations for different configurations of a single forward scatter LDV system show that three-dimensional mean velocity measurements can be made with a minimum restriction on the precision for detecting the Doppler frequency. Measurements of the three-dimensional cross products and correlation parameters are shown to require a significantly higher precision in the Doppler frequency detection.

Cliff, W. C.↗

Oscillating airfoil velocity field during large amplitude dynamic stall

The leading edge flowfield of an airfoil executing a sinusoidal oscillatory motion and experiencing dynamic stall under compressibility conditions has been studied using a two component LDV system. Phase averaged mean velocity measurements and some flow quantities derived from it are presented and discussed. The results indicate extremely large accelerations of the flow are present around the leading edge with mean velocity values 60 percent higher than and instantaneous velocities as large as 1.75 times the free stream velocity. The velocity profiles at certain locations over the airfoil resemble that of a wake.

Chandrasekhara, M. S.↗

W134: A new pre-main-sequence double-lined spectroscopic binary

We report the discovery that the pre-main-sequence star Walker 134 in the young cluster NGC 2264 is a double-lined spectroscopic binary. Both components are G stars with strong Li I 6708 A absorption lines. Twenty radial velocity measurements have been used to determined the orbital elements of this system. The orbit has a period of 6.3532 +/- 0.0012 days and is circular within the limits of our velocity resolution; e less than 0.01. The total system mass is stellar mass sin(exp 3) i = 3.16 solar mass with a mass ratio of 1.04. Estimates for the orbit inclination angle and stellar radii place the system near the threshold for eclipse observability; howerver, no decrease in brightness was seen during two attempts at photometric monitoring. The circular orbit of W 134 fills an important gap in the period distribution of pre-main-sequence binaries and thereby constrains the effectiveness of tidal orbital circularization during the pre-main sequence.

Padgett, Deborah L.↗