SEARCH · Engineering Papers

Results for “Transient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Type II bursts, shock waves, and coronal transients - The event of 1980 June 29, 0233 UT

The metric Type-II solar burst event of June 29, 1980, is characterized on the basis of spatially resolved radioheliograph observations obtained at Culgoora, Australia, and visible-light observations obtained with the coronograph/polarimeter of the SMM satellite. The data are presented in images, diagrams, and graphs and discussed in detail. The Type-II emission is found to arise in the dense moving material behind the transient loops, which have sky-plane width 0.5 solar radius and line-of-sight depth 0.1-0.4 solar radius. A faint arc observed moving ahead of the transient loops at about 900 km/sec and not associated with the Type-II burst is attributed to a shock front, and the compression ratio and Alfven Mach number of the enhanced-density region are estimated as n2/n1 = 1.3-3 and M(A) = 1.2-3. The ambient material at 3 solar radii is determined to have Alfven speed 250-625 km/sec and magnetic-field strength 50-120 mG. The total mass of the event is calculated as 700 Tg; the total magnetic energy of the loops is (1.5-15) x 10 to the 29th ergs.

Gary, D. E.↗

NASA NTRS1983

Mixed time integration schemes for transient conduction forced-convection analysis

A partition procedure for forced-convection conduction transient problems is presented. Mixed time partitions are defined wherein coupled conduction force-matrix equations are discretized using an implicit integration method, followed by derivation of a mixed time integration technique. Explicit-implicit and explicit-explicit partitions are performed for a stability analysis for transient conditions, e.g., those found in an actively air-cooled engine and airframe structure.

Liu, W. K.↗

NASA NTRS1984

A full-implicit-continuous-Eulerian (FICE) scheme for multidimensional transient magnetohydrodynamic (MHD) flows

A full implicit continuous Eulerian (FICE) scheme is developed for solving multidimensional transient MHD flow problems. The physical system under consideration is a general case of a transient MHD flow in which an initial steady state is subject to a finite amplitude disturbance. The governing equations are described, their finite difference formulation is presented and the FICE algorithm is given. The boundary conditions are treated by classifying them into physical and computational ones. The usefulness of the FICE algorithm is demonstrated using a physical example concerning the dynamical response of the static solar atmosphere due to a representative photospheric disturbance.

Wu, S. T.↗

NASA NTRS1984

Transient thermal stresses in a reinforced hollow disk or cylinder containing a radial crack

The transient thermal stress problem in a hollow cylinder or a disk containing a radial crack is considered. It is assumed that the cylinder is reinforced on its inner boundary by a membrane which has thermoelastic constants different than those of the base material. The transient temperature, thermal stresses and the crack tip stress intensity factors are calculated in a cylinder which is subjected to a sudden change of temperature on the inside surface. The results are obtained for various dimensionless parameters and material constants. The special cases of the crack terminating at the cylinder-membrane interface and of the broken membrane are separately considered and some examples are given.

Tang, R.↗

NASA NTRS1984

Transient components in the Lyman lines of hot stars Evidence for the ejection of shells or puffs on very short timescales

The existence of H I transient components in the stellar wind of Epsilon Per toward eight early type stars observed by the Copernicus satellite is systematically investigated. It is shown that such transient components are indeed present in the spectra of five of these stars and have characteristics very similar to the one found in the case of Epsilon Per. It is shown that such components can be interpreted in terms of coherent 'puffs' or shells of matter ejected by the stars. They would be caused by an increase of the stellar mass loss rate by a factor of 1.5 to 3 during one hour or less, and would be accelerated more slowly than the quiet wind. It is suggested that such events must be due to instabilities in these stars which are all slightly evolved stars ranging in spectral types between O9 and B1. The instabilities are probably similar to those in Beta Cephei stars, i.e., nonradial pulsations.

Gry, C.↗

NASA NTRS1985

Modeling a Transient Catalytic Combustor

Transient model of monolith catalytic combustor presented in report done under NASA/DOE contract. Model assumes quasi-steady gas phase and thermally "thin" solid. In gas-phase treatment, several quasi-global chemical reactions assumed capable of describing CO and unburnt hydrocarbon emissions in fuel-lean operations. In steady-state computation presented, influence of selected operating and design parameters on minimum combustor length studied. When fast transient responses required, both steady and unsteady studies made to achieve meaningful compromise in design.

Tien, J. S.↗

NASA NTRS1984

Data and results of a laboratory investigation of microprocessor upset caused by simulated lightning-induced analog transients

Advanced composite aircraft designs include fault-tolerant computer-based digital control systems with thigh reliability requirements for adverse as well as optimum operating environments. Since aircraft penetrate intense electromagnetic fields during thunderstorms, onboard computer systems maya be subjected to field-induced transient voltages and currents resulting in functional error modes which are collectively referred to as digital system upset. A methodology was developed for assessing the upset susceptibility of a computer system onboard an aircraft flying through a lightning environment. Upset error modes in a general-purpose microprocessor were studied via tests which involved the random input of analog transients which model lightning-induced signals onto interface lines of an 8080-based microcomputer from which upset error data were recorded. The application of Markov modeling to upset susceptibility estimation is discussed and a stochastic model development.

Belcastro, C. M.↗

NASA NTRS1985

Laboratory studies of spacecraft response to transient discharge pulses

The in-orbit measurement of spacecraft discharge properties was investigated. The experiments include design and fabrication of appropriate sensors and effects of spacecraft electromagnetic responses on the interpretation of the discharge data. Electric field sensors especially designed to response to high-speed transient signals were installed on a mock-up of a satellite. The simple mock-up was basically a sheet of aluminum rolled to form a cylinder. A movable spark-discharge noise source designed to be electromagnetically isolated from its power supply system was used to induce transient signals at various locations on the spacecraft's outer surface. The measurements and their implications are described. It is concluded that practical orbital measurements to define discharge noise source properties should be possible, and that simple mock-ups of the type described below are useful in sensor system design and data interpretation.

Nanevicz, J. E.↗

NASA NTRS1985

Direct Transient Analysis of a Fuze Assembly by Axisymmetric Solid Elements

A fuze assembly, which consists of three major parts, nose, collar and sleeve, was designed to survive severe transverse impact giving a maximum base acceleration of 20.000 G. It is shown that hoop failure occurred in the collar after the impact. They also showed that by bonding the collar to the nose, the collar was able to survive the same impact. To find out the effectiveness of the bonding quantitatively, axisymmetric solid elements TRAPAX and TRIAAX were used in modelling the fuze and direct transient analysis was performed. The dynamic stresses in selected elements on the bonded and unbonded collars were compared. The peak hoop stresses in the unbonded collar were found to be up to three times higher than those in the bonded collar. The NASTRAN results explained the observed hoop failure in the unbonded collar. In addition, static and eigenvalue runs were performed as checks on the models prior to the transient runs. The use of the MPCAX cards and the existence and contributors of the calculated first several nearly identical natural frequencies are addressed.

Dai, C. C.↗

NASA NTRS1985

Transient cosmic ray increase associated with a geomagnetic storm

On the basis of worldwide network data of cosmic ray nucleonic components, the transient cosmic ray increase due to the depression of cosmic ray cutoff rigidity during a severe geomagnetic storm was investigated in terms of the longitudinal dependence. Multiple correlation analysis among isotropic and diurnal terms of cosmic ray intensity variations and Dst term of the geomagnetic field is applied to each of various station's data. It is shown that the amplitude of the transient cosmic ray increase associated with Dst depends on the local time of the station, and that its maximum phase is found in the evening sector. This fact is consistent with the theoretical estimation based on the azimuthally asymmetric ring current model for the magnetic DS field.

Kudo, S.↗

NASA NTRS1984

Development and application of a generalized transient computer program for Shuttle atmospheric pressure and composition control analysis

A generalized computer program for analysis of pressure and composition in a multiple-volume system has been developed by NASA. This paper describes the development of the program, outlines the program's capabilities, and illustrates the application of the program to Space Shuttle-related atmospheric pressure and composition control analyses. The program's features include the calculation of transient partial pressures of four gases in four volumes, an option for either isothermal or temperature-transient analyses, simulation of pressure and composition control hardware, and simulation involving 0-10 crewmembers. This computer program has been used successfully for a variety of Shuttle-related analyses to support hardware design, develop operating procedures, and provide real-time Shuttle mission support. Due to the versatility of this computer program, it will be utilized for Space Station program analyses.

Lafuse, S. A.↗

NASA NTRS1985

Numerical simulation of transient inviscid gas flows in a shock tube

Time-dependent upwind high resolution schemes for solving the Euler equations were developed and applied to simulate 1-D and 2-D transient inviscid gas flows in a shock tube. Using obstacles of different geometries, a series of calculations were carried out to investigate the transient complex shock-wave diffraction phenomena. Shock-wave and objects interactions with shock Mach-number Ms ranging from 2 to 20 were considered. Comparison with analytical and available experimental results indicate good agreement. Display of detailed flow structures including multiple Mach shocks, slip surfaces, and vortex are also given.

Yang, J. Y.↗

NASA NTRS1986

Estimating Transient Pressure Surges in Cryogenic Systems

Potentially-damaging pressure waves anticipated and, therefore, avoided. Mathematical model developed for prediction of pressure behavior in single-and two-phase cryogenic systems. Transient liquid-flow analysis modified to incorporate behavior of vapor bubbles and used to predict maximum pressure in cryogenic transfer systems consisting of complex pipe and valve arrangements under both steady-state and transient conditions. Simulation compared favorably with data obtained during transfer of liquid oxygen from ground storage tanks to Space Shuttle orbiter external tanks. Program written in FORTRAN 77 for batch execution.

Pfister, P.↗

NASA NTRS1986

Advanced Rotordynamic Nonlinear Transient Simulation

Advanced rotordynamic nonlinear transient-simulation program, TRANSIM, developed to predict response of high-performance rotating machinery to variety of forcing functions. Works by modal superposition of rotor and casing subsystems. Transient response of system calculated by numerical integration of equations of motion, performed in modal coordinates. Resulting data transformed back into physical coordinates as required to determine user-requested loads and accelerations as function of time. Used to analyze Space Shuttle main engine high-pressure fuel turbopump. TRANSIM written in FORTRAN 77.

Becht, D. G.↗

NASA NTRS1985

Transient Heat Transfer in Zero Gravity Environment

The objective is to provide computer codes and/or correlations for application in the design of transient heat transfer systems. The mathematical models in the computer codes are being tested by experimental data obtained in the laboratory using optical techniques. The elimination of natural convection (buoyancy) in the experimental data obtained in zero-g (KC-135) facilitates the study of thermal expansion effects which is of interest in the development and testing of the mathematical models of the transient heat transfer. Initial flight in the KC 135 (June 1983) suggested some modifications to the experimental apparatus and the data acquisition technique (high speed video will replace high speed movies for recording optical records generated during the experiments). A series of KC-135 flights with this experiment on board are scheduled for summer/fall 1984. The acquisition of the aforementioned data using interferometry and beam deflection optical techniques is anticipated. The measurements provide time dependent temperature fields above a horizontal heater surface submerged in a static fluid (Freon 13). The heater surface is electrically heated for a time interval approximately 0.100 sec. during which the data are optically recorded.

Giarratano, P. G.↗

NASA NTRS1986

Design and Verification Guidelines for Vibroacoustic and Transient Environments

Design and verification guidelines for vibroacoustic and transient environments contain many basic methods that are common throughout the aerospace industry. However, there are some significant differences in methodology between NASA/MSFC and others - both government agencies and contractors. The purpose of this document is to provide the general guidelines used by the Component Analysis Branch, ED23, at MSFC, for the application of the vibroacoustic and transient technology to all launch vehicle and payload components and payload components and experiments managed by NASA/MSFC. This document is intended as a tool to be utilized by the MSFC program management and their contractors as a guide for the design and verification of flight hardware.

Source record↗

NASA NTRS1986

Investigation and modeling of space shuttle main engine shutdown transient chugging

The space shuttle main engines experience a low frequency pressure pulsation in both the fuel and oxidizer preburners during the shutdown transient. This pressure pulsation, called chugging, has been linked to undesirable bearing loads and possible damage to the spark ignitor supply piping for the fuel preburner. The problem is briefly described and a model is proposed that includes: (1) a transient stirred tank reactor model for the combustion chamber, (2) a resistance capacitance model for the supply piping and (3) purge gas/liquid oxygen interface tracking.

George, P. E., II↗

NASA NTRS1985

Solution algorithms for nonlinear transient heat conduction analysis employing element-by-element iterative strategies

The particular problems investigated in the present study arise from nonlinear transient heat conduction. One of two types of nonlinearities considered is related to a material temperature dependence which is frequently needed to accurately model behavior over the range of temperature of engineering interest. The second nonlinearity is introduced by radiation boundary conditions. The finite element equations arising from the solution of nonlinear transient heat conduction problems are formulated. The finite element matrix equations are temporally discretized, and a nonlinear iterative solution algorithm is proposed. Algorithms for solving the linear problem are discussed, taking into account the form of the matrix equations, Gaussian elimination, cost, and iterative techniques. Attention is also given to approximate factorization, implementational aspects, and numerical results.

Winget, J. M.↗