Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Impact of Three-Phase Relative Permeability and Hysteresis Models on Forecasts of Storage Associated With CO 2 -EOR

Geological CO 2 sequestration in conjunction with enhanced oil recovery (CO 2 -EOR) includes complex multiphase flow processes compared to CO 2 storage in deep saline aquifers. Two of the most critical factors affecting multiphase flow in CO 2 -EOR are three-phase relative permeability and associated hysteresis, both of which are difficult to measure and are usually represented by numerical interpolation models. The purpose of this research is to improve understanding of (1) the relative impacts of different three-phase relative permeability models and hysteresis models on CO 2 trapping mechanisms, and (2) uncertainty associated with these two factors. Four different three-phase relative permeability models and three hysteresis models were applied to simulations of an active CO 2 -EOR site, the SACROC unit located in western Texas. To eliminate potential bias of deterministic parameters, we utilized a sequential Gaussian simulation technique to generate 50 realizations to describe heterogeneity of porosity and permeability, based on data obtained from well logs and seismic survey. Simulation results of forecasted CO 2 storage suggested that (1) the choice of three-phase relative permeability model and hysteresis model led to noticeable impacts on forecasted CO 2 sequestration capacity; (2) impacts of three-phase relative permeability models and hysteresis models on CO 2 trapping are small during the CO 2 -EOR injection period, and increase during the post-EOR CO 2 injection period; (3) the specific choice of hysteresis model is more important relative to the choice of three-phase relative permeability model; and (4) using the recommended three-phase WAG (Water-Alternating-Gas) hysteresis model may increase the impact of three-phase relative permeability models and uncertainty due to heterogeneity.

42 ENGINEERING↗

Potential job creation in the cellulosic biofuel industry: the effect of feedstock price

Abstract A large‐scale biofuel industry based on cellulosic materials would provide many new job opportunities. We model potential direct jobs generated by a cellulosic ethanol industry in the United States. These job projections are estimated via a bottom‐up approach based on the cellulosic feedstock supply chain systems as a function of the price farmers receive for the feedstock. The cellulosic feedstock types involved in the feedstock supply chain system are crop residues, perennial grasses, annual energy crops, and coppiced and non‐coppiced woody crops. Results show that the feedstock transportation sector is where most of the jobs are created, followed by the feedstock production sector. Jobs generated by the feedstock transportation sector account for around one‐third of total new jobs generated, while jobs generated by cellulosic feedstock production account for about one‐quarter of the new jobs. In the United States, most of the new jobs are created in Iowa, Kansas, Missouri, Oklahoma, and Texas. At feedstock prices over US $ 55 per dry ton, more than 100 000 new direct full‐time equivalent jobs are potentially generated. The number of jobs potentially generated by the cellulosic ethanol fuel production system is highly sensitive to the feedstock price. At $60 per ton, a 50% increase in feedstock price, the system generates over 6 times more jobs than it does at a feedstock price of $40 per ton. Many more farmers produce cellulosic feedstock for ethanol production at higher feedstock prices, and thus more ethanol production leads to more job creation. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd

Kim, Seungdo↗

Comparative Sugar Recovery and Fermentation Data Following Pretreatment of Poplar Wood by Leading Technologies

Through a Biomass Refining Consortium for Applied Fundamentals and Innovation among Auburn University, Dartmouth College, Michigan State University, the National Renewable Energy Laboratory, Purdue University, Texas A&M University, the University of British Columbia, and the University of California at Riverside, leading pretreatment technologies based on ammonia fiber expansion, aqueous ammonia recycle, dilute sulfuric acid, lime, neutral pH, and sulfur dioxide were applied to a single source of poplar wood, and the remaining solids from each technology were hydrolyzed to sugars using the same enzymes. Identical analytical methods and a consistent material balance methodology were employed to develop comparative performance data for each combination of pretreatment and enzymes. Overall, compared to data with corn stover employed previously, the results showed that poplar was more recalcitrant to conversion to sugars and that sugar yields from the combined operations of pretreatment and enzymatic hydrolysis varied more among pretreatments. However, application of more severe pretreatment conditions gave good yields from sulfur dioxide and lime, and a recombinant yeast strain fermented the mixed stream of glucose and xylose sugars released by enzymatic hydrolysis of water washed solids from all pretreatments to ethanol with similarly high yields. An Agricultural and Industrial Advisory Board followed progress and helped steer the research to meet scientific and commercial needs.

09 BIOMASS FUELS↗

Invasion promotes invasion: Facilitation of C 3 perennial grass dominance in mixed C 3 /C 4 grassland by an invasive C 3 woody sprouter ( Prosopis glandulosa )

1. In the Southern Great Plains (SGP) of the United States, encroachment of the native invasive woody legume, honey mesquite (Prosopis glandulosa Torr.), has caused a decline in C4 mid-grass abundance. Prosopis glandulosa invasion has also facilitated growth of the C3 mid-grass species, Texas wintergrass (Nassella leucotricha [Trin & Rupr.] Pohl) initially beneath its canopy but extending to interspaces between P. glandulosa as stand density increases. Little is known about the stability of the Prosopis/Nassella association or C4 grass recovery following P. glandulosa disturbance. 2. We quantified C3 and C4 grass production in interspaces, and basal cover in interspaces and P. glandulosa subcanopy microsites for 9 years following P. glandulosa suppression (top-kill) and compared this to untreated P. glandulosa woodland (woodland). 3. The Prosopis/Nassella association limited the window of C4 mid-grass recovery to only a few years. Nassella leucotricha dominated grass production during the first 3 years after top-kill. C4 mid-grass recovery began in year 4, but was interrupted by severe drought in years 5 through 7. Recovery resumed in year 8, due to above- average summer rainfall, but P. glandulosa regrowth was large enough by this time to limit C4 mid-grass production to a third of its potential. 4. Nassella leucotricha basal cover remained dominant and stable in woodland sub-canopy microsites, even during drought, and only briefly declined in top-kill subcanopy microsites before returning to pretreatment levels by year 8 as P. glandulosa regrowth increased and provided shade. 5. Synthesis and applications. A single suppression event had little impact on disrupting the Prosopis/Nassella association and allowing C4 mid-grass recovery. The coupling of a deciduous, N-fixing C3 woody species with this C3 perennial grass may be a vegetative “state” that is resistant to multiple woody suppression disturbances and permanently limits the transition back to C4 grassland.

54 ENVIRONMENTAL SCIENCES↗

Winter connectivity and leapfrog migration in a migratory passerine

Abstract Technological advances in migratory tracking tools have revealed a remarkable diversity in migratory patterns. One such pattern is leapfrog migration, where individuals that breed further north migrate to locations further south. Here, we analyzed migration patterns in the Painted Bunting ( Passerina ciris ) using a genetic‐based approach. We started by mapping patterns of genetic variation across geographic space (called a genoscape) using 386 individuals from 25 populations across the breeding range. We then genotyped an additional 230 samples from 31 migration stopover locations and 178 samples from 16 wintering locations to map patterns of migratory connectivity. Our analyses of genetic variation across the breeding range show the existence of four genetically distinct groups within the species: Eastern, Southwestern, Louisiana, and Central groups. Subsequent assignment of migrating and wintering birds to genetic groups illustrated that birds from the Central group migrated during the fall via western Mexico or southern Texas, spent the winter from northeastern Mexico to Panama, and migrated north via the Gulf Coast of Mexico. While Louisiana birds overlapped with Central birds on their spring migratory routes along the Gulf Coast, we found that Louisiana birds had a more restricted wintering distribution in the Yucatan Peninsula and Central America. Further estimation of the straight‐line distance from the predicted breeding location to the wintering location revealed that individuals sampled at lower winter latitudes traveled to greater distances (i.e., the predicted breeding area was further north; p > .001), confirming that these species exhibit a leapfrog migration pattern. Overall, these results demonstrate the utility of a genoscape‐based approach for identifying range‐wide patterns of migratory connectivity such as leapfrog migration with a high degree of clarity.

59 BASIC BIOLOGICAL SCIENCES↗

Vertebrate and invertebrate competition for carrion in human‐impacted environments depends on abiotic factors

Abstract Human altered landscapes have caused declines in the diversity of wildlife where behaviorally plastic species (i.e., mesocarnivores and invasive species) tend to monopolize these areas and consume predictable and readily accessible food resources, such as human food waste and carrion. Increased consumption of carrion by vertebrates and invasive invertebrate species can alter population dynamics of native necrophagous insects relying on these resources. We tested the hypothesis that vertebrate scavengers and invasive species reduce blow fly (1) ability to use carrion and (2) reproduction in human‐impacted environments in central Texas, USA, with season, habitat (field and wooded landscapes), and carrion type (species of carrion and coat color) acting synergistically. Vertebrate scavengers in this habitat, of which 75% of the documented species were mesocarnivores and obligate scavengers, consumed 100% of carrion during the winter and 62% during summer despite having low species richness (2–5 species). Of the remaining carcasses available for arthropod activity during summer, the invasive red imported fire ant, Solenopsis invicta (Hymenoptera: Formicidae), monopolized 34%, and blow flies (e.g., Lucilia eximia and Chrysomya rufifacies [Diptera: Calliphoridae]) were only able to colonize 25%. Approximately 90% of carrion that was utilized by blow flies was co‐colonized by fire ants, and subsequent production of adult blow flies experienced up to a ninefold reduction in production compared with carcasses that were not scavenged by vertebrates or fire ants. Our results demonstrate oviposition resources used by blow flies in environments altered by human activity are reduced significantly by vertebrate scavengers and an invasive ant species. Future research should determine whether competitive interactions between vertebrate and invasive ant competitors for access to carrion resources have population‐level impacts to blow flies in human‐mediated ecosystems, or whether blow flies are able to shift to other resources to maintain sustainable populations and continue providing ecosystem services, such as pollination.

54 ENVIRONMENTAL SCIENCES↗

Co-Optimization of CO 2 -EOR and Storage Processes in Mature Oil Reservoirs

This article presents an optimization methodology for CO 2 enhanced oil recovery in partially depleted reservoirs. A field-scale compositional reservoir flow model was developed for assessing the performance history of an active CO 2 flood and for optimizing both oil production and CO 2 storage in the Farnsworth Unit (FWU), Ochiltree County, Texas. A geological framework model constructed from geophysical, geological, and engineering data acquired from the FWU was the basis for all reservoir simulations and the optimization method. An equation of state was calibrated with laboratory fluid analyses and subsequently used to predict the thermodynamic minimum miscible pressure (MMP). Initial history calibrations of primary, secondary and tertiary recovery were conducted as the basis for the study. After a good match was achieved, an optimization approach consisting of a proxy or surrogate model was constructed with a polynomial response surface method (PRSM). The PRSM utilized an objective function that maximized both oil recovery and CO 2 storage. Experimental design was used to link uncertain parameters to the objective function. Control variables considered in this study included: water alternating gas cycle and ratio, production rates and bottom-hole pressure of injectors and producers. Other key parameters considered in the modeling process were CO 2 purchase, gas recycle and addition of infill wells and/or patterns. The PRSM proxy model was ‘trained’ or calibrated with a series of training simulations. This involved an iterative process until the surrogate model reached a specific validation criterion. A sensitivity analysis was first conducted to ascertain which of these control variables to retain in the surrogate model. A genetic algorithm with a mixed-integer capability optimization approach was employed to determine the optimum developmental strategy to maximize both oil recovery and CO 2 storage. The proxy model reduced the computational cost significantly. The validation criteria of the reduced order model ensured accuracy in the dynamic modeling results. The prediction outcome suggested robustness and reliability of the genetic algorithm for optimizing both oil recovery and CO 2 storage. The reservoir modeling approach used in this study illustrates an improved approach to optimizing oil production and CO 2 storage within partially depleted oil reservoirs such as FWU. Lastly, this study may serve as a benchmark for potential CO 2 –EOR projects in the Anadarko basin and/or geologically similar basins throughout the world.

02 PETROLEUM↗

Simulation study of chemo-mechanical impacts of CO 2 injection in morrow b sandstone reservoir

Here, this study investigates the impacts of geomechanical and geochemical changes on carbon storage in a partially depleted oil reservoir, using results from four different coupled simulation models. Models were used to examine the relative importance of storage mechanisms, and how changing reservoir parameters might affect these mechanisms through time. The study uses data from a Morrowan sandstone reservoir in the Farnsworth Unit (FWU), Ochiltree County, Texas which is currently undergoing CO 2 enhanced oil recovery (EOR). Partially depleted oil reservoirs such as the FWU offer attractive carbon utilization and/or storage targets because of existing infrastructure and economic benefits from incremental oil recovery as well as tax credits. However, prediction of storage capacity or long-term fluid migration in these fields can be difficult because of the wide variation in formation fluids and operational histories that may have undergone. CO 2 injection can cause complex geomechanical and geochemical responses in a reservoir as a result of interplay between dynamic changes in pore pressure, reservoir temperature, fluid composition, and interactions between formation fluids, CO 2 , and reservoir rock. Thus, multiple coupled numerical simulation models must be developed and used to more precisely understand what CO 2 storage mechanisms are most significant, as well as the long-term fate of the stored CO 2 . Our study used results from hydrodynamic, coupled hydro-geomechanical, coupled hydro-geochemical, and coupled hydro-geomechanical-geochemical models to examine how changes in geomechanical and geochemical properties can impact the injectivity or storage capacity of CO 2 . Models simulated historical field operations and then forward-modeled a water-alternate-gas (WAG) operation for 20 years, followed by a 1000-year post-injection monitoring. The work demonstrates that in this specific reservoir, geomechanical impacts appear to be more significant than any geochemical processes, which showed minimal impact on reservoir properties. Furthermore, these simulation scenarios corroborated other studies showing more than 90% of CO 2 injected are being stored and will remain stored in the reservoir. The study was able to draw on a rich set of data from this currently operational project for the work. Because the Morrow is a widespread oil-bearing reservoir in the midcontinent of the United States and is fairly typical of many sandstone reservoirs elsewhere, the study has significance beyond the boundaries of our field area.

58 GEOSCIENCES↗

Performance evaluation of interpolation methods for incorporating rain gauge measurements into NEXRAD precipitation data: A case study in the Upper Guadalupe River Basin

High spatial and temporal resolution of precipitation data is critical input for hydrological budget estimation and flash flood modeling. This study evaluated four methods (Bias Adjustment (BA), Simple Kriging with varying Local Means (SKlm), Kriging with External Drift (KED), and Regression Kriging (RK)) for their performances in incorporating gauge rainfall measurements into NEXRAD (Next Generation Weather Radar) Multisensor Precipitation Estimator (MPE) (hourly and 4 x 4 km{sup 2}). Measurements from a network of 50 gauges at the Upper Guadalupe River Basin, Central Texas and MPE data for the year 2004 were used in the study. We used three evaluation coefficients Percentage Bias (PB), Coefficient of Determination (R2), and Nash-Sutcliffe efficiency (NSE) to examine the performance of the four methods for preserving regional and local scale characteristics of observed precipitation data. The results show that the two Kriging-based methods (SKlm and RK) are in generally better than BA and KED and that the PB and NSE criteria are better than the R2 criterion in assessing the performance of the four methods. It is also worth noting that the performance of one method at regional scale may be different from its performance at local scale. Critical evaluation of the performance of different methods at local or regional scale should be conducted according to the different purposes. The results obtained in this study are expected to contribute to the development of more accurate spatial rainfall products for hydrologic budget and flash flood modeling.

54 ENVIRONMENTAL SCIENCES↗

Contribution of eastern North Pacific tropical cyclones and their remnants on flooding in the western United States

Recent studies have focused on identifying the spatial coverage of heavy rainfall associated with tropical cyclones (TCs) and their remnants (TC‐events) throughout the southwestern United States from eastern North Pacific storms. Yet little is known about the larger spatial contribution of these storms among extreme floods over the western United States. This paper examines the spatial and fractional contribution of 103 TC‐events among annual maximum streamflow at 1,429 long‐term U.S. Geological Survey (USGS) streamgages with at least 30 years of daily discharge data over the 1958–2010 water years. The highest fractional contributions to annual daily maxima by these storms (~5–14%) are found in southern California, Arizona, southernmost Nevada and Utah, southern and western New Mexico, central Colorado, and Texas. While nearly 32% of the streamgages have at least one annual maximum that was generated by a TC‐event, TC‐events play a limited role in contributing to the upper tail of the flood peak distribution across the western United States.

Barth, Nancy A.↗

Wood and water: How trees modify wood development to cope with drought

Societal Impact Statement Drought plays a conspicuous role in forest mortality, and is expected to become more severe in future climate scenarios. Recent surges in drought‐associated forest tree mortality have been documented worldwide. For example, recent droughts in California and Texas killed approximately 129 million and 300 million trees, respectively. Drought has also induced acute pine tree mortality across east‐central China, and across extensive areas in southwest China. Understanding the biological processes that enable trees to modify wood development to mitigate the adverse effects of drought will be crucial for the development of successful strategies for future forest management and conservation. Summary Drought is a recurrent stress to forests, causing periodic forest mortality with enormous economic and environmental costs. Wood is the water‐conducting tissue of tree stems, and trees modify wood development to create anatomical features and hydraulic properties that can mitigate drought stress. This modification of wood development can be seen in tree rings where not only the amount of wood but also the morphology of the water‐conducting cells are modified in response to environmental conditions. In this review, we provide an overview of how trees conduct water, and how trees modify wood development to affect water conduction properties in response to drought. We discuss key needs for new research, and how new knowledge of wood formation can play a role in the conservation of forests under threat by climate change.

Rodriguez‐Zaccaro, F. Daniela↗

Integrating Solar Energy, Desalination, and Electrolysis

Solar electricity enables the advancement and deployment of technologies that are strongly influenced by clean energy availability and cost. The economics of both desalination and hydrogen production from water electrolysis are dominated by the cost of energy, and the availability of inexpensive solar energy creates markets and offers incentives to the desalination and electrolyzer industries. In this report the production of high-purity water and hydrogen from seawater is focused on. Current electrolyzers require deionized water so they need to be coupled with desalination units. It is shown that such coupling is cost effective in hydrogen generation, and it also offers benefits to thermal desalination, which can utilize waste heat from electrolysis. Furthermore, such coupling can be optimized when electrolyzers operate at high current density, using low-cost solar and/or wind electricity, as such operation increases both hydrogen production and heat generation. Results of technoeconomic modeling of polymer electrolyte membrane electrolyzers define thresholds of electricity pricing, current density, and operating temperature that make clean electrolytic hydrogen cost competitive with hydrogen from steam methane reforming (SMR). By using 2020 hourly electricity pricing in California and Texas, it is estimated that hydrogen can be produced from seawater in coupled desalination-electrolyzer systems at prices near $2 kg -1 H 2 , reaching cost parity with hydrogen produced from SMR.

14 SOLAR ENERGY↗

Variability in large-scale wind power generation: Variability in large-scale wind power generation

The paper demonstrates the characteristics of wind power variability and net load variability in multiple power systems based on real data from multiple years. Demonstrated characteristics include probability distribution for different ramp durations, seasonal and diurnal variability and low net load events. The comparison shows regions with low variability (Sweden, Spain and Germany), medium variability (Portugal, Ireland, Finland and Denmark) and regions with higher variability (Quebec, Bonneville Power Administration and Electric Reliability Council of Texas in North America; Gansu, Jilin and Liaoning in China; and Norway and offshore wind power in Denmark). For regions with low variability, the maximum 1 h wind ramps are below 10% of nominal capacity, and for regions with high variability, they may be close to 30%. Wind power variability is mainly explained by the extent of geographical spread, but also higher capacity factor causes higher variability. It was also shown how wind power ramps are autocorrelated and dependent on the operating output level. When wind power was concentrated in smaller area, there were outliers with high changes in wind output, which were not present in large areas with well-dispersed wind power.

17 WIND ENERGY↗

Simulating wind power forecast error distributions for spatially aggregated wind power plants

Dispersion and aggregation of wind power plants lower the uncertainty of wind power by reducing wind power forecasting errors. Using quantitative methods, this paper studies the dispersion's impact on the uncertainty of the aggregated wind power production. A method to simulate day-ahead forecast error distributions at different dispersion and forecasting skill scenarios is presented. The proposed method models the uncertainty of wind power forecasting on an annual basis and at different levels of production. As a result, the uncertainty in the forecasting of spatially dispersed wind power plants is modelled using two continuous distributions: Laplace and beta distribution. The analysis shows that even the production level uncertainty can be modelled in various dispersion and forecasting skill scenarios. The model for aggregated forecast error distributions requires only four variables: capacity-weighted distance of the total wind power plant fleet, mean of the site-specific mean absolute errors (MAEs), number of aggregated wind power plants, and the mean variability of the elevations from the proximities of the aggregated wind power plants. Here, the results are especially promising when the number of aggregated wind power plants exceeds five, the terrain complexity is low or moderate, and the aggregation region is large. This is demonstrated through a case study for Texas, United States.

17 WIND ENERGY↗

Limitations of reanalysis data for wind power applications

Wind energy resource estimates commonly depend on simulated wind speed profiles generated by reanalysis or weather models due to the lack of long time series measurements with sufficient coverage at relevant heights (roughly 90 m above ground). However, modeled data, including reanalyses, can be noisy and display a wide range of biases and errors, variously attributed to terrain effects, poor coverage of assimilated inputs, and model resolution. Wind generation records, if available at high temporal and geographical resolution, can provide a proxy for wind measurements and allow for evaluation of reanalyses and weather model wind time series. We use a 7-year-long data set of hourly, plant-level generation records from over 100 wind plants across Texas to evaluate two commonly used reanalysis data sets (MERRA2 and ERA5). Additionally, we use 1-year of records (2019) to evaluate an operational, high-resolution regional weather modeling product (HRRR v3). We find that across the region, and across all modeling products, the modeled representation of wind generation (i.e., wind speeds at hub heights passed through a power curve) has relatively small mean errors when aggregated daily, but that accuracy and hourly correlation have a strong diurnal sensitivity. Accuracy and correlation systematically decline through the evening and markedly improve after sunrise. These diurnal patterns persist even in the highest resolution model tested (HRRR v3). We hypothesize the nighttime decline in accuracy is mostly due to poorly represented boundary layer conditions, perhaps related to model representation of stability, while other uncertainties (such as wake effects) play a secondary role.

17 WIND ENERGY↗

An Analysis of Future Wind Energy Resources and Cost Uncertainties Across the United States

Wind power is a growing source of energy generation that relies on complex global atmospheric and earth system processes. There has been evidence of reductions in average wind speeds over land in North America since the 1980s, and several models project that average wind speeds will continue to decrease. Concurrently, the cost of wind energy systems in the United States has been decreasing since around 2010, a trend also projected to continue. There is considerable uncertainty in these future projections, with quantitative estimates of future wind resource and system costs varying widely. To study this, we run wind energy models with possible future system costs, turbine designs, and meteorological inputs from multiple downscaled earth system models over the contiguous United States. Changes in mean annual energy production from 2000-2019 to 2040-2059 can be as high as +10% in South Texas or as low as -20% in Iowa. Larger turbines and moderate reductions in system costs can offset the largest projected decreases in wind resource, but much uncertainty remains in the extent to which wind resources will change and to what extent system costs can be reduced. An analysis of variance shows, in several states in the Midwest, uncertainty in future wind resources can influence the cost of wind energy nearly as much as uncertainty in future system costs.

17 WIND ENERGY↗

A Bivariate Mixed Distribution with a Heavy-tailed Component and its Application to Single-site Daily Rainfall Simulation

This paper presents an improved brivariate mixed distribution, which is capable of modeling the dependence of daily rainfall from two distinct sources (e.g., rainfall from two stations, two consecutive days, or two instruments such as satellite and rain gauge). The distribution couples an existing framework for building a bivariate mixed distribution, the theory of copulae and a hybrid marginal distribution. Contributions of the improved distribution are twofold. One is the appropriate selection of the bivariate dependence structure from a wider admissible choice (10 candidate copula families). The other is the introduction of a marginal distribution capable of better representing low to moderate values as well as extremes of daily rainfall. Among several applications of the improved distribution, particularly presented here is its utility for single-site daily rainfall simulation. Rather than simulating rainfall occurrences and amounts separately, the developed generator unifies the two processes by generalizing daily rainfall as a Markov process with autocorrelation described by the improved bivariate mixed distribution. The generator is first tested on a sample station in Texas. Results reveal that the simulated and observed sequences are in good agreement with respect to essential characteristics. Then, extensive simulation experiments are carried out to compare the developed generator with three other alternative models: the conventional two-state Markov chain generator, the transition probability matrix model and the semi-parametric Markov chain model with kernel density estimation for rainfall amounts. Analyses establish that overall the developed generator is capable of reproducing characteristics of historical extreme rainfall events and is apt at extrapolating rare values beyond the upper range of available observed data. Moreover, it automatically captures the persistence of rainfall amounts on consecutive wet days in a relatively natural and easy way. Another interesting observation is that the recognized ‘overdispersion’ problem in daily rainfall simulation ascribes more to the loss of rainfall extremes than the under-representation of first-order persistence. The developed generator appears to be a sound option for daily rainfall simulation, especially in particular hydrologic planning situations when rare rainfall events are of great importance.

Singh, Vijay P.↗

Magnesium Technology 2019

Magnesium and its alloys are being investigated widely for applications that require extraordinarily high strength-to-weight ratio, vibration damping, electromagnetic shielding, reduction in carbon footprint, sustainability improvements, and low toxicity. In the past decade or so, this drive has led to increased adoption of magnesium and its alloys in everyday products and it is no longer regarded as an esoteric material. The overarching goal of its widespread adoption and replacement of conventional materials such as steel and aluminum alloys has been restricted due to the cost of the material, limited sources of primary material, alloying constraints, high chemical reactivity, and challenges associated with its plasticity. Researchers/scientists, engineers, and economists from industry, government agencies/laboratories, and academic institutions alike are actively developing roadmaps for next-generation products and addressing these challenges as quickly as possible through unique and innovative methods. The TMS Magnesium Committee has been actively involved in providing a platform to these entities for disseminating the latest information, developments, and cutting-edge research and development, and showcasing the latest trends related to magnesium and its alloys through the Magnesium Technology Symposium, which takes place every year at the annual TMS conference. This proceedings edition/volume retains the essence of this long-standing tradition. The 20th volume, Magnesium Technology 2019, is the proceedings of the Magnesium Technology Symposium held during the 148th TMS Annual Meeting & Exhibition in San Antonio, Texas, March 10–14, 2019. This proceeding captures commentaries and papers from 16 different nations who presented their work; the papers have been categorized systematically, based on topics pertaining to casting and solidification, thermomechanical processing, deformation mechanisms, modeling, corrosion, recycling, and applications.

Joshi, Vineet V.↗