Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Testing and Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Design and experimental testing of the performance of an outdoor LiBr/H{sub 2}O solar thermal absorption cooling system with a cold store

A domestic-scale prototype experimental solar cooling system has been developed based on a LiBr/H{sub 2}O absorption system and tested during the 2007 summer and autumn months in Cardiff University, UK. The system consisted of a 12 m{sup 2} vacuum tube solar collector, a 4.5 kW LiBr/H{sub 2}O absorption chiller, a 1000 l cold storage tank and a 6 kW fan coil. The system performance, as well as the performances of the individual components in the system, were evaluated based on the physical measurements of the daily solar radiation, ambient temperature, inlet and outlet fluid temperatures, mass flow rates and electrical consumption by component. The average coefficient of thermal performance (COP) of the system was 0.58, based on the thermal cooling power output per unit of available thermal solar energy from the 12 m{sup 2} Thermomax DF100 vacuum tube collector on a hot sunny day with average peak insolation of 800 W/m{sup 2} (between 11 and 13.30 h) and ambient temperature of 24 C. The system produced an electrical COP of 3.6. Experimental results prove the feasibility of the new concept of cold store at this scale, with chilled water temperatures as low as 7.4 C, demonstrating its potential use in cooling domestic scale buildings. (author)

14 SOLAR ENERGY↗

Sealing of fractures in a representative CO 2 reservoir caprock by migration of fines

The impact of fines migration on fracture transmissivity reduction was investigated by injecting a brine solution containing a suspension of 0.1 wt. % kaolinite particles with a mean particle size distribution of 9.6 µm through fractured shale core samples. The fractures had apertures estimated to be approximately 100 µm. A mass balance approach was used to determine the quantity of kaolinite that was deposited within the fractures (influent – effluent = amount deposited in fractures). Large fractions (44 to 90%) of the suspended kaolinite pumped through the fractures were deposited within the fractures. Based on fracture volumes estimated with X-ray computed tomography, it was determined that approximately 10 to 17% of the fracture volume was filled with kaolinite at the point when flow was completely restricted. These results indicate that 100 µm fractures in CO 2 reservoir caprocks could be sealed within hours if the brines passing through the fractures contain a proportional volume of particulates to the tests performed in this laboratory study.

04 OIL SHALES AND TAR SANDS↗

Modeling soil respiration and variations of source components using a multi-factor global climate change experiment

Soil respiration is an important component of the global carbon cycle and is highly responsive to changes in soil temperature and moisture. Accurate prediction of soil respiration and its changes under future climatic conditions requires a clear understanding of the processes involved. In spite of this, most current empirical soil respiration models incorporate just few of the underlying mechanisms that may influence its response. In this study, a new partial process-based component model built on source components of soil respiration was tested using data collected from a multi-factor climate change experiment that manipulates CO2 concentrations, temperature and precipitation. These results were then compared to results generated using several other established models. The component model we tested performed well across different treatments of global climate change. In contrast, some other models, which worked well predicting ambient environmental conditions, were unable to predict the changes under different climate change treatments. Based on the component model, the relative proportions of heterotrophic respiration (Rh) in the total soil respiration at different treatments varied from 0.33 to 0.85. There is a significant increase in the proportion of Rh under the elevated atmospheric CO2 concentration in comparison ambient conditions. The dry treatment resulted in higher proportion of Rh at elevated CO2 and ambient T than under elevated CO2 and elevated T. Also, the ratios between root growth and root maintenance respiration varied across different treatments. Neither increased temperature nor elevated atmospheric CO2 changed Q10 values significantly, while the average Q10 value at wet sites was significantly higher than it at dry sites. There was a higher possibility of increased soil respiration under drying relative to wetting conditions across all treatments based on monthly data, indicating that soil respiration may also be related to soil moisture at previous time periods. Our results reveal that the extent, time delay and contribution of different source components need to be included into mechanistic/processes-based soil respiration models at corresponding scale.

54 ENVIRONMENTAL SCIENCES↗

Coupled thermal stress simulations of ductile tearing

Predictions for ductile tearing of a geometrically complex Ti-6Al-4V plate were generated using a Unified Creep Plasticity Damage model in fully coupled thermal stress simulations. Uniaxial tension and butterfly shear tests performed at displacement rates of 0.0254 and 25.4 mm/s were also simulated. Results from these simulations revealed that the material temperature increase due to plastic work can have a dramatic effect on material ductility predictions in materials that exhibit little strain hardening. Furthermore, this occurs because the temperature increase causes the apparent hardening of the material to decrease which leads to the initiation of deformation localization and subsequent ductile tearing earlier in the loading process.

36 MATERIALS SCIENCE↗

A Combined Experimental-Computational Confirmation of the Seismic Stability of the Branched Pipelines of Systems of Nuclear Power Stations

The increase in the extent and degree of complication of the geometry of the branched pipelines of nuclear power stations has led to the appearance of natural forms of vibrations with frequencies that cannot be determined by the traditional combined experimental-computational method. This has made it necessary to develop new approaches to the experimental determination of the dynamic characteristics and to the selection of the boundaries of the design plans. Through use of the proposed correction to the technique and algorithm used in the estimation of the seismic stability of pipelines it has been possible to increase the precision with which the lowest frequencies of the natural vibrations are determined and, in certain cases, to also reduce the volume of operations through “targeted” testing performed at sites of expected maximal amplitudes of the lowest forms of vibrations.

42 ENGINEERING↗

The sapphire backscattering monochromator at the Dynamics beamline P01 of PETRA III

Here, we report on a high resolution sapphire backscattering monochromator installed at the Dynamics beamline P01 of PETRA III. The device enables nuclear resonance scattering experiments on M ossbauer isotopes with transition energies between 20 and 60 keV with sub-meV to meV resolution. In a first performance test with 119 Sn nuclear resonance at a X-ray energy of 23.88 keV an energy resolution of 1.34 meV was achieved. Moreover, the device extends the field of nuclear resonance scattering at the PETRA III synchrotron light source to many further isotopes like 151 Eu, 149 Sm, 161 Dy, 125 Te and 121 Sb.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Novel Thin Film Composite Nanofiltration Membrane Using Monoethanolamine (MEA) and Diethanolamine (DEA) with m-Phenylenediamine (MPD)

A novel thin-film composite (TFC) nanofiltration membrane was prepared by interfacial polymerization of polyamide layer on a polyethersulfone support, using monoethanolamine (MEA) and diethanolamine (DEA) with m-phenylenediamine as monomers and trimesoyl chloride (TMC) as crosslink agent. The membrane surface before and after using aminoalcohol monomers (MEA and DEA) was investigated in detail using ATR-FTIR, TGA, AFM and SEM. The AFM and SEM images showed that addition of MEA and DEA had a strong impact on surface morphology. The polyamide layer thickness of control and modified TFC membranes based on MEA and DEA were calculated to be in 180–230 nm range and the mean pore sizes were about 0.35–1.2 nm. The RO performance tests indicated that addition of MEA and DEA can increase the NaCl and Na{sub 2}SO{sub 4} rejection remarkably with little decline in the pure water permeation flux.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Coupled Processes Modeling in Rock Salt and Crushed Salt Including Halite Solubility Constraints: Application to Disposal of Heat-Generating Nuclear Waste

This work presents numerical modeling of coupled thermal, hydraulic and mechanical processes in rock salt and crushed salt considering halite solubility constraints. The TOUGH-FLAC simulator is used, with a recently enhanced Equation-Of-State module that includes the thermodynamic properties of aqueous fluids of variable salinity. Laboratory and field scale tests performed on rock salt and crushed salt under temperature gradients are modeled first to evaluate the capabilities of the simulator to reproduce important features, such as porosity changes induced by halite dissolution/precipitation, and brine and heat migration. Since the results are quite satisfactory, the simulator is used to predict the long-term response of a generic salt repository for heat-generating nuclear waste. To evaluate the impacts of halite solubility on the predictions, two simulations that respectively consider or neglect solubility constraints are performed. In the scenario studied, the results are not significantly affected by dissolution/precipitation, and only some differences are observed due to changes in porosity, but the dominating processes remain the same. Finally, with the new provisions, TOUGH-FLAC is more complete in terms of processes occurring around a heat-releasing nuclear waste package and can therefore provide more accurate predictions of the long-term performance of a nuclear waste repository in salt formations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Approach to Cerebrospinal Fluid (CSF) Biomarker Discovery and Evaluation in HIV Infection

Central nervous system (CNS) infection is a nearly universal facet of systemic HIV infection that varies in character and neurological consequences. While clinical staging and neuropsychological test performance have been helpful in evaluating patients, cerebrospinal fluid (CSF) biomarkers present a valuable and objective approach to more accurate diagnosis, assessment of treatment effects and understanding of evolving pathobiology. We review some lessons from our recent experience with CSF biomarker studies. We have used two approaches to biomarker analysis: targeted, hypothesis-driven and non-targeted exploratory discovery methods. We illustrate the first with data from a cross-sectional study of defined subject groups across the spectrum of systemic and CNS disease progression and the second with a longitudinal study of the CSF proteome in subjects initiating antiretroviral treatment. Both approaches can be useful and, indeed, complementary. The first is helpful in assessing known or hypothesized biomarkers while the second can identify novel biomarkers and point to broad interactions in pathogenesis. Common to both is the need for well-defined samples and subjects that span a spectrum of biological activity and biomarker concentrations. Previouslydefined guide biomarkers of CNS infection, inflammation and neural injury are useful in categorizing samples for analysis and providing critical biological context for biomarker discovery studies. CSF biomarkers represent an underutilized but valuable approach to understanding the interactions of HIV and the CNS and to more objective diagnosis and assessment of disease activity. Both hypothesis-based and discovery methods can be useful in advancing the definition and use of these biomarkers.

Biomarkers↗

Tribological Properties of the Oxide Coatings Produced onto 6061-T6 Aluminum Alloy in the Hard Anodizing Process

The aim of this work was to establish the influence of the thickness of the anodic coatings on their mechanical properties and to understand the relation between their hardness and the abrasion resistance. The coatings were produced in the hard anodizing process onto the 6061-T6 aluminum alloy. Their thickness was in the range between 19 and 43 µm. The abrasion resistance was determined by using Taber abrasion test. The weight losses of the coatings obtained were in the range between 15 and 11 mg and decreased with their increasing thickness. It has been shown that the hardness measured on the cross sections of the coatings did not correspond to their abrasion resistance. Thus, the new approach has been proposed. The hardness of the coatings was estimated on the basis of the results of the scratch test performed at the constant load. The results obtained correspond to the abrasion resistance of the coatings.

36 MATERIALS SCIENCE↗

Application of the Mixed-Mode Model for Numerical Simulation of Pearlitic Transformation

The multiscale model of pearlitic transformation, including the finite element solution of the second Fick’s equation with moving boundary in the microscale and Fourier equation in the macroscale, is presented in this paper. According to the mixed-mode approach, both the volume diffusion and the interface mobility were considered. Model describes sidewise and frontal growth of cementite and ferrite plates in a single grain of the austenite. Assessment of the possibility of the developed model application to determine the key parameters in terms of strength properties of pearlitic steel, i.e., pearlite grain size and colony size as well as interlamellar spacing for various cooling conditions, was the main aim of this work. The model was validated and verified on the basis of experimental tests performed for two eutectoid steels. In practice, developed model can support design process for a technology of high-strength rods and long products manufacturing. Rails were selected as a case study in this work, and therefore, numerical simulations of accelerated cooling of the rail head were performed and the relationship between the parameters of heat treatment, parameters of the structure and properties of the finished product was determined on the basis of obtained results.

36 MATERIALS SCIENCE↗

A Systematic Assessment of Various Stability/Instability Criteria in Predicting the Hot Deformation-Related Instabilities in Super-304H Stainless Steels

In this study, different existing stability/instability criteria (viz Prasad, Murty, Gegel, Alexander, Jonas, and Semiatin) are used to characterize the hot deformation instabilities of super-304H stainless steel. The instability maps are developed based on flow stress data acquired from uniaxial hot compression tests performed at various temperatures (1173-1423 K) and strain rates (0.001-10 s{sup −1}). The deformation instabilities are further validated through detailed microstructural observations. Flow localization and cracking have been identified as the signature of deformation instabilities in this alloy. The microcracks have been found to be associated with the grain boundary precipitation of coarse (~ 1- to 5-µm-sized) Nb-rich particles (mainly NbC). The instability criteria developed based on dynamic material modeling (i.e., Prasad’s and Murty’s criteria) could accurately predict the formation of microcracks in the entire hot deformation range employed in this study. Albeit the Gegel’s and Alexander’s stability criteria could correctly predict the flow localization, it has overestimated the deformation instabilities at high temperatures (> 1250 K) and low strain rates (≤ 0.1 s{sup −1}). In contrast, Jonas’ and Semiatin’s instability criteria have under-predicted the unstable domains in the studied alloy.

36 MATERIALS SCIENCE↗

Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing [Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing]

Magnetically isotropic bonded magnets with a high loading fraction of 70 vol.% Nd-Fe-B are fabricated via an extrusion-based additive manufacturing, or 3D printing system that enables rapid production of large parts. The density of the printed magnet is ~5.2 g/cm 3 . The room temperature magnetic properties are: intrinsic coercivity H ci = 8.9 kOe (708.2 kA/m), remanence B r = 5.8 kG (0.58 T), and energy product (BH)max = 7.3 MGOe (58.1 kJ/m 3 ). The as-printed magnets are then coated with two types of polymers, both of which improve the thermal stability as revealed by flux aging loss measurements. Tensile tests performed at 25 °C and 100 °C show that the ultimate tensile stress (UTS) increases with increasing loading fraction of the magnet powder, and decreases with increasing temperature. AC magnetic susceptibility and resistivity measurements show that the 3D printed Nd-Fe-B bonded magnets exhibit extremely low eddy current loss and high resistivity. Lastly, we demonstrate the performance of the 3D printed magnets in a DC motor configuration via back electromotive force measurements.

36 MATERIALS SCIENCE↗

Quantitative resilience evaluation on recovery from emergency situations in nuclear power plants

Here, this paper mainly introduces how to develop a resilience evaluation model by quantifying the relationship between resilience and resilience components in regard to recovering from emergency situations in nuclear power plants (NPPs). It is an extension of the author’s previous researches. To develop the model, the first step was to analyze event reports published in Republic of Korea in terms of resilience factors from different safety perspectives. Second, statistical methods such as factor analysis, principal component analysis, and multivariate regression analysis were applied to the dataset to identify relations among resilience factors and develop a quantitative resilience evaluation model for recovery from emergency situations in NPPs. Third, the model was validated using the recent event report data released in Korea. Lastly, we present a discussion on how to apply the quantitative resilience evaluation model to results from stress tests performed in Korea.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Layer structured bifunctional monolith catalysts for energy-efficient conversion of CO 2 to dimethyl ether

A monolith supported bifunctional catalyst for the direct conversion of CO 2 to dimethyl ether was developed and evaluated. The catalyst consists of a layer structured configuration, in which a CuO/ZnO/ZrO 2 component for methanol synthesis using CO 2 as feedstock and a Ferrierite zeolite component for the subsequent dehydration reaction are washcoated onto the channel surfaces of a metallic monolith substrate as two consecutive layers. The metal substrate provides heat conduction to regulate the catalyst bed temperature. The layered configuration significantly improves the synergistic effects of the two components, resulting in a 20% increase in the productivity for dimethyl ether at 240 °C as compared with the conventional catalysts with the two components being blended in various levels of proximity. Furthermore, the layer structured design minimizes the undesirable interaction between the two components and drastically improves the on-stream durability of the catalyst. No activity decline was observed in a 146-h performance test.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mineralogical and chemical assessment of concrete damaged by the oxidation of sulfide-bearing aggregates: Importance of thaumasite formation on reaction mechanisms

Damages in concrete containing sulfide-bearing aggregates were recently observed in the Trois-Rivieres area (Quebec, Canada), characterized by rapid deterioration within 3 to 5 years after construction. A petrographic examination of concrete core samples was carried out using a combination of tools including: stereomicroscopic evaluation, polarized light microscopy, scanning electron microscopy, X-ray diffraction and electron microprobe analysis. The aggregate used to produce concrete was an intrusive igneous rock with different metamorphism degrees and various proportions of sulfide minerals. In the rock, sulfide minerals were often surrounded by a thin layer of carbonate minerals (siderite). Secondary reaction products observed in the damaged concrete include 'rust' mineral forms (e.g. ferric oxyhydroxides such as goethite, limonite (FeO (OH) nH{sub 2}O) and ferrihydrite), gypsum, ettringite and thaumasite. In the presence of water and oxygen, pyrrhotite oxidizes to form iron oxyhydroxides and sulphuric acid. The acid then reacts with the phases of the cement paste/aggregate and provokes the formation of sulfate minerals. Understanding both mechanisms, oxidation and internal sulfate attack, is important to be able to duplicate the damaging reaction in laboratory conditions, thus allowing the development of a performance test for evaluating the potential for deleterious expansion in concrete associated with sulfide-bearing aggregates.

36 MATERIALS SCIENCE↗

Macrocrack propagation in concrete specimens under sustained loading: Study of the physical mechanisms

This study presents a series of 4-point bending tests performed to describe the delayed behavior of unreinforced pre-cracked beams under low, moderate and high sustained loading levels. The deflection creep rate, the failure time and the load level were assessed. A linear relation, in a semi-log scale, was found for the deflection creep rate at high load levels. In addition, a linear relation, in a log–log scale, between the secondary deflection creep rate and failure time was observed. Besides, it was shown that the secondary creep deflection rate increases with the sustained loading level and the macrocrack propagation rate when macrocrack propagation occurs during the sustained loading. Physical mechanisms are proposed to explain these results and may be summarized as follows: the delayed behavior of an unreinforced cracked concrete specimen under sustained loading is mainly due to the cracking evolution, thus the creation of microcracks and/or the propagation of a macrocrack.

36 MATERIALS SCIENCE↗

The role of spray-enhanced swirl flow for combustion stabilization in a stratified-charge DISI engine

Implementing spray-guided stratified-charge direct-injection spark-ignited (DISI) engines is inhibited by the occurrence of misfire and partial burns. Engine-performance tests demonstrate that increasing engine speed induces combustion instability, but this deterioration can be prevented by generating swirling flow during the intake stroke. In-cylinder pressure-based heat-release analysis reveals that the appearance of poor-burn cycles is not solely dependent on the variability of early flame-kernel growth. Moreover, cycles can experience burning-rate regression during later combustion stages and may or may not recover before the end of the cycle. Thermodynamic analysis and optical diagnostics are used here to clarify why swirl improves the combustion repeatability from cycle to cycle. The fluid dynamics of swirl/spray interaction was previously demonstrated using high-speed PIV measurements of in-cylinder motored flow. It was found that the sprays of the multi-hole injector redistribute the intake-generated swirl flow momentum, thereby creating a better-centered higher angular-momentum vortex with reduced variability. The engine operation with high swirl was found to have significant improvement in cycle-to-cycle variations of both flow pattern and flow momentum. This paper is an extension of the previous work. Here, PIV measurements and flame imaging are applied to fired operation for studying how the swirl flow affects variability of ignition and subsequent combustion phases. PIV results for fired operation are consistent with the measurements made of motored flow. They demonstrate that the spark-plasma motion is highly correlated with the direction of the gas flow in the vicinity of the spark-plug gap. Without swirl, the plasma is randomly stretched towards either side of the spark plug, causing variability in the ignition of the two spray plumes that are straddling the spark plug. Conversely, swirl flow always convects the spark plasma towards one spray plume, causing a more repeatable ignition. The swirl decreases local RMS velocity, consistent with an observed reduction of early-burn variability. Broadband flame imaging demonstrates that with swirl, the flame consistently propagates in multiple directions to consume fuel–air mixtures within the piston bowl. In contrast, operation without swirl displays higher variability of flame-spread patterns, occasionally causing the appearance of partial-burn cycles.

33 ADVANCED PROPULSION SYSTEMS↗