Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tabulated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

To facilitate comparison between the four different spatial resolution of the NS-001 MSS data sets, a supervised approach was taken in defining training blocks for each of the different cover types. The training fields representing each cover type category were grouped and this group was clustered to determine the individual spectral classes within each cover type category which would effectively characterize the entire test site. Graphs show the variation in spectral response level with respect to distance in the across track dimension for four sampling intervals. Radar digitization procedures were developd. Flight characteristics and parameters for digitization of radar imagery are tabulated. The statement of work for phase 3 was reviewed and modifications were suggested to meet funding reduction.

Hoffer, R. M.↗
NASA NTRS1982

An Experimental Study of Dynamic Stall on Advanced Airfoil Sections: Hot-Wire and Hot Film Measurements - Volume 3

Detailed unsteady boundary layer measurements are presented for eight airfoils oscillated in pitch through the dynamic stall regime. The present report (the third of three volumes) describes the techniques developed for analysis and evaluation of the hot film and hot wire signals, offers some interpretation of the results, and tabulates all the cases in which flow reversal has been recorded.

Carr, L. W.↗
NASA NTRS1983

Analysis of unswept and swept wing chordwise pressure data from an oscillating NACA 0012 airfoil experiment. Volume 2: Data report

The analysis of the chordwise load distribution and its sensitivity to the various system parameters represents the next phase of the overall study and is the subject of the present two volume report. The present volume is a compilation of all of the time history response data obtained during the test program previously described. The data have been tabulated in the form of Fourier coefficients for reasons of compactness and for ease by the user to reproduce the unsteady component of the individual pressures and the complete (unsteady plus steady state components) integrated load results. This data volume contains the individual pressure response time histories along the chord followed by the corresponding integrated load results. A further description of these data tables can be found in the text that follows.

St.hilaire, A. O.↗
NASA NTRS1983

Properties of large nearly perfect crystals at very low temperatures

A liquid helium cryostat of a size and construction unavailable commercially, was built for use in measuring the Q of several materials at milli-Kelvin temperatures. The design and testing of the cryostat is described as well as the design of the experiment vacuum chamber and adaptor for the dilution refrigerator insert. Theory, design, and testing are also discussed for the magnetic coils built to levitate the materials so as to isolate them and increase the measured Q. A four point suspension with capacitor end plates as the transducer was used to obtain preliminary Q measurements of 6061 aluminum alloy and single crystal silicon. Results are tabulated.

Davis, W.↗
NASA NTRS1983

Literature search of publications concerning the prediction of dynamic inlet flow distortion and related topics

Publications prior to March 1981 were surveyed to determine inlet flow dynamic distortion prediction methods and to catalog experimental and analytical information concerning inlet flow dynamic distortion prediction methods and to catalog experimental and analytical information concerning inlet flow dynamics at the engine-inlet interface of conventional aircraft (excluding V/STOL). The sixty-five publications found are briefly summarized and tabulated according to topic and are cross-referenced according to content and nature of the investigation (e.g., predictive, experimental, analytical and types of tests). Three appendices include lists of references, authors, organizations and agencies conducting the studies. Also, selected materials summaries, introductions and conclusions - from the reports are included. Few reports were found covering methods for predicting the probable maximum distortion. The three predictive methods found are those of Melick, Jacox and Motycka. The latter two require extensive high response pressure measurements at the compressor face, while the Melick Technique can function with as few as one or two measurements.

Schweikhhard, W. G.↗
NASA NTRS1981

Mapping forest types in Worcester County, Maryland, using LANDSAT data

The feasibility of mapping Level 2 forest cover types for a county-sized area on Maryland's Eastern Shore was demonstrated. A Level 1 land use/land cover classification was carried out for all of Worcester County as well. A June 1978 LANDSAT scene was utilized in a classification which employed two software packages on different computers (IDIMS on an HP 3000 and ASTEP-II on a Univac 1108). A twelve category classification scheme was devised for the study area. Resulting products include black and white line printer maps, final color coded classification maps, digitally enhanced color imagery and tabulated acreage statistics for all land use and land cover types.

Burtis, J., Jr.↗
NASA NTRS1981

The Michigan data needs questionnaire

The data needs questionnaire is an element in the project design study for the Michigan Resource Inventory Act and is aimed at gathering information on what inventory information is required by land use planners throughout the state. Analysis of questionnaire responses is discussed. Some information on current use categories was tabulated. The respondents selected a broad range of categories at all levels of detail. Those most frequently indicated were urban categories.

Hill-Rowley, R.↗
NASA NTRS1983

Evaluation of LANDSAT-4 TM and MSS ground segment geometry performance without ground control

The along-line one dimensional FFT algorithm was successfully used to test band-to-band, swath-to-swath, and inter-swath registration of a Washington, D.C. scene. Analysis of the tabulated and plotted results of the MSS and TM P-data shows that a slow spacecraft roll condition of under one hertz exists in this scene. Characteristics of the data for both instruments are listed.

Source record↗
NASA NTRS1983

Transport properties of oxygen

Tables of viscosity, thermal conductivity, and thermal diffusivity of oxygen as a function of temperature and pressure from the triple point to 320 K and at pressures to 100 MPa are presented. Auxiliary tables in engineering units are also given. Viscosity and thermal conductivity are calculated from published correlations. Density and specific heat at constant pressure, required to calculate thermal diffusivity, are obtained from an equation of state. The Prandtl number can be obtained quite easily from the values tabulated.

Roder, H. M.↗
NASA NTRS1983

AVE/VAS 4: 25-mb sounding data

The rawinsonde sounding program is described and tabulated data at 25 mb intervals for the 24 stations and 14 special stations participating in the experiment is presented. Sounding were taken at 3 hr intervals. An additional sounding was taken at the normal synoptic observation time. Some soundings were computed from raw ordinate data, while others were interpolated from significant level data.

Sienkiewicz, M. E.↗
NASA NTRS1983

Axial vane-type swirler performance characteristics

The performance of an axial vane-type swirler was investigated to aid in computer modeling of gas turbine combustor flowfields and in evaluation of turbulence models for swirling confined jet flow. The swirler studied is annular with a hub-to-swirler diameter ratio of 0.25 and ten adjustable vanes of pitch-to-chord ratio 0.68. Measurements of time-mean axial, radial, and tangential velocities were made at the swirler exit plane using a five-hole pitot probe technique with computer data reduction. Nondimensionalized velocities from both radial and azimuthal traverses are tabulated and plotted for a range of swirl vane angles phi from 0 to 70 degrees. A study was done of idealized exit-plane velocity profiles relating the swirl numbers S and S' to the ratio of maximum swirl and axial velocities for each idealized case, and comparing the idealized swirl numbers with ones calculated from measured profiles.

Sander, G. F.↗
NASA NTRS1983

Body-surface pressure data on two monoplane-wing missile configurations with elliptical cross sections at Mach 2.50

Tabulated body surface pressure data for two monoplane-wing missile configurations are presented and analyzed. Body pressure data are presented for body-alone, body-tail, and body-wing-tail combinations. For the lost combination, data are presented for tail-fin deflection angles of 0 deg and 30 deg to simulate pitch, yaw, and roll control for both configurations. The data cover angles of attack from -5 deg to 25 deg and angles of roll from 0 deg to 90 deg at a Mach number of 2.50 and a Reynolds number of 6.56 x 1,000,000 per meter. Very consistent, systematic trends with angle of attack and angle of roll were observed in the data, and very good symmetry was found at a roll angle of 0 deg. Body pressures depended strongly on the local body cross-section shape, with very little dependence on the upstream shape. Undeflected fins had only a small influence on the pressures on the aft end of the body; however, tail-fin deflections caused large changes in the pressures.

Allen, J. M.↗
NASA NTRS1982

Technical and investigative support for high density digital satellite recording systems

Methods and results of examinations and tests conducted on magnetic recording tapes under consideration for a high density digital (HDDR) satellite recording system are described. The examinations and tests investigate the performance of tapes with respect to their physical, magnetic and electrical characteristics. The objective of the tests, the likely significance of typical results, and the importance of the characteristics under investigation to the application are included. Theoretical discussions of measurement methods are provided where appropriate. Methods and results are discussed; the results of some sections are tabulated together to facilitate their comparison. The conclusion of each test section relates the test results to their possible significance and attempts to correlate the results of that section with the results of other tests. Some of the sections analyze sources of error inherent in the measurement methods or relate the value of the information obtained to the objectives of the test or the overall purpose of the project.

Schultz, R. A.↗
NASA NTRS1982

On composites with periodic structure

The overall moduli of a composite with an isotropic elastic matrix containing periodically distributed (anisotropic) inclusions or voids, can be expressed in terms of several infinite series which only depend on the geometry of the inclusions or voids, and hence can be computed once and for all for given geometries. For solids with periodic structures these infinite series play exactly the same role as does Eshelby's tensor for a single inclusion or void in an unbounded elastic medium. For spherical and circular-cylindrical geometries, the required infinite series are calculated and the results are tabulated. These are then used to estimate the overall elastic moduli when either the overall strains or the overall stresses are prescribed, obtaining the same results. These results are compared with other estimates and with experimental data. It is found that the model of composites with periodic structure yields estimates in excellent agreement with the experimental observations.

Nemat-Nasser, S.↗
NASA NTRS1982

X-ray nebular models

Theoretical models are presented for the temperature and ionization structure of spherically symmetric, constant density, gaseous nebulae surrounding compact X-ray sources and for the optical, UV, and X-ray spectra emerging from the nebulae. The structure is determined by assuming a local balance between heating and cooling in the gas, and the radiation field is found by solving a simplified equation of transfer. The calculations include an accurate and comprehensive treatment of the atomic processes affecting the state of the gas and the radiation field. The destruction of line radiation during resonance scattering causes models to be significantly hotter and more highly ionized than previous models of the same type. Model results are presented for a wide variety of gas densities and X-ray source spectra, scaling laws which allow these results to be generalized to a wide variety of astrophysical solutions are discussed, and column densities of multiply charged species are tabulated.

Kallman, T. R.↗
NASA NTRS1981

Landsat observations of Mount St. Helens

The eruption of Mount St. Helens on May 18, 1980, and subsequent destruction of approximately 593 square kilometers (229 square miles) of vegetation, clearly provided a unique opportunity for earth-oriented satellite remote sensing systems. Landsat, a relatively high resolution Multispectral Scanner (MSS) system, imaged Mount St. Helens both before and after its major eruption. Digital data have been used to create a damage assessment map and a change detection image. Several classes of timber damage and land cover modification have been developed. Acreages for each class have been tabulated.

Bohn, C. G.↗
NASA NTRS1983

Composites with periodic microstructure

For an elastic body containing periodically distributed inhomogeneities, a general procedure is developed for estimating the overall properties of the composite in terms of several infinite series which, for the isotropic matrix (but anisotropic inclusions), depend only on the geometry of the inhomogeneities and hence can be calculated once and for all for each geometry. These infinite series are obtained and tabulated for ellipsoidal inhomogeneities, and the results are used to estimate the overall elastic moduli of composites which contain spherical or ellipsoidal voids or elastic inclusions.

Iwakuma, T.↗