Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TWIST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Lattice QCD calculation of the pion generalized parton distribution

We present the results of a Lattice QCD computation of pion generalized parton distribution (GPD), employing perturbative matching up to next-to-next-to-leading order (NNLO). The computations are based on an ensemble of Nf=2+1 highly improved staggered quarks (HISQ) with a pion mass of 300 MeV and a lattice spacing of 0.04 fm. Centered on the zero-skewness limit, we utilize a recently proposed Lorentz-invariant definition of GPD, which is derived from Lorentz-invariant amplitudes. We analyze and compare these amplitudes in both Breit and non-Breit kinematic frames at comparable momentum transfers, validating their frame-independent nature. To obtain light-cone GPD, we integrate hybrid scheme renormalization with the large momentum effective theory (LaMET). Moreover, we determine the first three iso-vector generalized form factors (GFFs) of the pion using the ratio scheme renormalization and leading-twist factorization, achieving NNLO accuracy.

Ding, Heng-Tong↗
DOE OSTI2023

High Efficiency 2-Bladed Utility Wind Turbine Enhanced by CoFlow Jet Active Flow Control

The aerodynamic performance and power output of a high efficiency Co-Flow Jet (CFJ) 2-bladed Wind Turbine is studied in this paper. CFJ is a Zero-Net-Mass-Flux (ZNMF) active flow control method that dramatically increases airfoil lift coefficient and suppresses flow separation at a low energy expenditure. The 3D Reynolds Averaged Navier-Stokes (RANS) equations with one-equation Spalart-Allmaras (SA) turbulence model are solved to simulate the 3D flows of the wind turbines. The CFJ-Wind Turbine in this paper is modified from the NREL 3-bladed 3.4 MW reference wind turbine with the same RPM, blade length, distribution of chord, twist, and bending. The CFJ 2-bladed wind turbine utilizes the CFJ-NACA 64 series airfoils at most of the blade span from 31.88\% to the tip. The CFJ injection and suction slots are implemented along the full blade span to enhance the effectiveness and power output. The study shows that the 2-bladed CFJ turbine significantly increases power output compared with the 3-bladed baseline turbine at all wind speeds by 15.8\% at the wind speed of 9.8 m/s and by 25.9\% at 4 m/s respectively. The efficiency enhancement is substantially more at the low wind speed than at high wind speed. This would be very beneficial to increase the annual power output or capacity factor as wind turbines work at the speeds lower than the rated speed for most of the time. The results show that the flow field around the blade surface presents a significant enhanced suction peak near the blade leading edge, which results in a very high tangential force and thus increased wind turbine net power coefficient. Consistent with the previous study for the small NREL Phase VI research wind turbine, this paper demonstrates that CFJ 2-bladed wind turbine is an effective technology to extract more power from the wind at all speeds. This study is just an initial effort to demonstrate the advantage of the CFJ blade with no design optimization. It is believed that there is more potential to further enhance the efficiency improvement.

active flow control↗
DOE OSTI2021

Elucidating the Mechanical Energy for Cyclization of a DNA Origami Tile

DNA origami has emerged as a versatile method to synthesize nanostructures with high precision. This bottom-up self-assembly approach can produce not only complex static architectures, but also dynamic reconfigurable structures with tunable properties. While DNA origami has been explored increasingly for diverse applications, such as biomedical and biophysical tools, related mechanics are also under active investigation. Here we studied the structural properties of DNA origami and investigated the energy needed to deform the DNA structures. We used a single-layer rectangular DNA origami tile as a model system and studied its cyclization process. This origami tile was designed with an inherent twist by placing crossovers every 16 base-pairs (bp), corresponding to a helical pitch of 10.67 bp/turn, which is slightly different from that of native B-form DNA (~10.5 bp/turn). We used molecular dynamics (MD) simulations based on a coarse-grained model on an open-source computational platform, oxDNA. We calculated the energies needed to overcome the initial curvature and induce mechanical deformation by applying linear spring forces. We found that the initial curvature may be overcome gradually during cyclization and a total of ~33.1 kcal/mol is required to complete the deformation. These results provide insights into the DNA origami mechanics and should be useful for diverse applications such as adaptive reconfiguration and energy absorption.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Carbonic Anhydrase Enhanced UV-Crosslinked PEG-DA/PEO Extruded Hydrogel Flexible Filaments and Durable Grids for CO 2 Capture

In this study, poly (ethylene glycol) diacrylate/poly (ethylene oxide) (PEG-DA/PEO) interpenetrating polymer network hydrogels (IPNH) were extruded into 1D filaments and 2D grids. The suitability of this system for enzyme immobilization and CO 2 capture application was validated. IPNH chemical composition was verified spectroscopically using FTIR. The extruded filament had an average tensile strength of 6.5 MPa and elongation at break of 80%. IPNH filament can be twisted and bent and therefore is suitable for further processing using conventional textile fabrication methods. Initial activity recovery of the entrapped carbonic anhydrase (CA) calculated from esterase activity, showed a decrease with an increase in enzyme dose, while activity retention of high enzyme dose samples was over 87% after 150 days of repeated washing and testing. IPNH 2D grids that were assembled into spiral roll structured packings exhibited increased CO 2 capture efficiency with increasing enzyme dose. Long-term CO 2 capture performance of the CA immobilized IPNH structured packing was tested in a continuous solvent recirculation experiment for 1032 h, where 52% of the initial CO 2 capture performance and 34% of the enzyme contribution were retained. These results demonstrate the feasibility of using rapid UV-crosslinking to form enzyme-immobilized hydrogels by a geometrically-controllable extrusion process that uses analogous linear polymers for both viscosity enhancement and chain entanglement purposes, and achieves high activity retention and performance stability of the immobilized CA. Potential uses for this system extend to 3D printing inks and enzyme immobilization matrices for such diverse applications as biocatalytic reactors and biosensor fabrication.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Spin Susceptibility in Neutron Matter from Quantum Monte Carlo Calculations

The spin susceptibility in pure neutron matter is computed from auxiliary field diffusion Monte Carlo calculations over a wide range of densities. The calculations are performed for different spin asymmetries, while using twist-averaged boundary conditions to reduce finite-size effects. The employed nuclear interactions include both the phenomenological Argonne AV8′ + UIX potential and local interactions that are derived from chiral effective field theory up to next-to-next-to-leading order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Spin Physics at PHENIX

Situated at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory, the PHENIX experiment has for almost two decades been at the forefront of investigations into spin structure and dynamics in high-energy nuclear physics. Although decommissioned in 2016, the PHENIX collaboration has released a number of new results over the past several years that continue to inform the field. Recent longitudinal spin measurements uncover the role of gluon and sea quark polarization in the proton. Transverse spin measurements probe the transverse momentum-dependent (TMD) distributions and higher-twist multiparton correlators that are needed to fully explain partonic dynamics in the initial and final state. Additionally, the effects of heavy ions on spin have been studied by comparing transverse spin measurements between p+p and p+A collisions. These recent results and their wider implications are presented.

PHENIX↗
DOE OSTI2022

Viral Capsid Change upon Encapsulation of Double-Stranded DNA into an Infectious Hypodermal and Hematopoietic Necrosis Virus-like Particle

In this study, we aimed to encapsulate the sizable double-stranded DNA (dsDNA, 3.9 kbp) into a small-sized infectious hypodermal and hematopoietic necrosis virus-like particle (IHHNV-VLP; T = 1) and compared the changes in capsid structure between dsDNA-filled VLP and empty VLP. Based on our encapsulation protocol, IHHNV-VLP was able to load dsDNA at an efficiency of 30–40% (w/w) into its cavity. Structural analysis revealed two subclasses of IHHNV-VLP, so-called empty and dsDNA-filled VLPs. The three-dimensional (3D) structure of the empty VLP produced in E. coli was similar to that of the empty IHHNV-VLP produced in Sf9 insect cells. The size of the dsDNA-filled VLP was slightly bigger (50 Å) than its empty VLP counterpart; however, the capsid structure was drastically altered. The capsid was about 1.5-fold thicker due to the thickening of the capsid interior, presumably from DNA–capsid interaction evident from capsid protrusions or nodules on the interior surface. In addition, the morphological changes of the capsid exterior were particularly observed in the vicinity of the five-fold axes, where the counter-clockwise twisting of the “tripod” structure at the vertex of the five-fold channel was evident, resulting in a widening of the channel’s opening. Whether these capsid changes are similar to virion capsid maturation in the host cells remains to be investigated. Nevertheless, the ability of IHHNV-VLP to encapsulate the sizable dsDNA has opened up the opportunity to package a dsDNA vector that can insert exogenous genes and target susceptible shrimp cells in order to halt viral infection.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Global Magni4icence, or: 4G Networks

The global magnificent four theory is the homological version of a maximally supersymmetric $(8+1)$-dimensional gauge theory on a Calabi-Yau fourfold fibered over a circle. In the case of a toric fourfold we conjecture the formula for its twisted Witten index. String-theoretically we count the BPS states of a system of $D0$-$D2$-$D4$-$D6$-$D8$-branes on the Calabi-Yau fourfold in the presence of a large Neveu-Schwarz $B$-field. Mathematically, we develop the equivariant $K$-theoretic DT4 theory, by constructing the four-valent vertex with generic plane partition asymptotics. Physically, the vertex is a supersymmetric localization of a non-commutative gauge theory in $8+1$ dimensions.

Mathematics↗
DOE OSTI2021

Laboratory Study of the Torus Instability Threshold in Solar-relevant, Line-tied Magnetic Flux Ropes

Coronal mass ejections (CMEs) occur when long-lived magnetic flux ropes (MFRs) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index, ${n}_{}=-z\,\partial (\mathrm{ln}{B}_{})/\partial z$, is larger than a critical value, $n\gt {n}_{\mathrm{cr}}^{}$, where ${n}_{\mathrm{cr}}^{}=1.5$ for a full, large aspect ratio torus. However, when this is applied to solar MFRs, a range of conflicting values for ${n}_{\mathrm{cr}}^{}$ is found in the literature. To investigate this discrepancy, we have conducted laboratory experiments on arched, line-tied flux ropes and applied a theoretical model of the torus instability. Our model describes an MFR as a partial torus with foot points anchored in a conducting surface and numerically calculates various magnetic forces on it. This calculation yields better predictions of ${n}_{\mathrm{cr}}^{}$ that take into account the specific parameters of the MFR. Here, we describe a systematic methodology to properly translate laboratory results to their solar counterparts, provided that the MFRs have a sufficiently small edge safety factor or, equivalently, a large enough twist. After this translation, our model predicts that ${n}_{\mathrm{cr}}^{}$ in solar conditions falls near ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim 0.9$ and within a larger range of ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim (0.7,1.2)$, depending on the parameters. The methodology of translating laboratory MFRs to their solar counterparts enables quantitative investigations of CME initiation through laboratory experiments. These experiments allow for new physics insights that are required for better predictions of space weather events but are difficult to obtain otherwise.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The 2022 High-energy Outburst and Radio Disappearing Act of the Magnetar 1E 1547.0–5408

We report the radio and high-energy properties of a new outburst from the radio-loud magnetar 1E 1547.0–5408. Following the detection of a short burst from the source with Swift-BAT on 2022 April 7, observations by NICER detected an increased flux peaking at (6.0 ± 0.4) × 10 –11 erg s –1 cm –2 in the soft X-ray band, falling to a baseline level of 1.7 × 10 –11 erg s –1 cm –2 over a 17 day period. Joint spectroscopic measurements by NICER and NuSTAR indicated no change in the hard nonthermal tail despite the prominent increase in soft X-rays. Observations at radio wavelengths with Murriyang, the 64 m Parkes radio telescope, revealed that the persistent radio emission from the magnetar disappeared at least 22 days prior to the initial Swift-BAT detection and was redetected two weeks later. Such behavior is unprecedented in a radio-loud magnetar, and may point to an unnoticed slow rise in the high-energy activity prior to the detected short bursts. Finally, our combined radio and X-ray timing revealed the outburst coincided with a spin-up glitch, where the spin frequency and spin-down rate increased by 0.2 ± 0.1 μHz and (–2.4 ± 0.1) × 10 –12 s –2 , respectively. A linear increase in the spin-down rate of (–2.0 ± 0.1) × 10 –19 s –3 was also observed over 147 days of postoutburst timing. Our results suggest that the outburst may have been associated with a reconfiguration of the quasi-polar field lines, likely signaling a changing twist, accompanied by spatially broader heating of the surface and a brief quenching of the radio signal, yet without any measurable impact on the hard X-ray properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A Study of the Merging Dwarf Galaxy VCC322

Abstract Galaxy interactions and mergers can enhance or reduce star formation, but a complete understanding of the involved processes is still lacking. The effect of dwarf galaxy mergers is even less clear than their massive counterpart. We present a study on a dwarf merger remnant in the Virgo cluster, VCC322, which might form a triple system with VCC334 and VCC319. We identify a prominent long and straight tail-like substructure that has a size comparable to its host galaxy VCC322. By comparing the color–color (g−rversusr−H) distribution with simple stellar population models, we infer that the metallicity and stellar age of this tail areZ ⋆ ∼ 0.02Z ⊙ andt ⋆ ∼ 10 Gyr, respectively. In VCC319, we find a sign of isophotal twisting. This suggests that VCC319 may be subject to tidal interaction. An analysis of the Sloan Digital Sky Survey optical spectra of VCC322 indicates mass- and light-weighted ages of about 10 9.8 yr and 10 7.5 yr, respectively, indicating an ongoing star formation activity. However, the star formation in VCC322 seems suppressed when compared to other star-forming dwarfs of comparable stellar masses. Our finding of shock excitation of optical emission lines indicates that interaction-induced shock may contribute to the heating of cold gas and suppression of star formation.

Astronomy & Astrophysics↗
DOE OSTI2024

Kink Instability of Flux Ropes in Partially Ionized Plasmas

In the solar atmosphere, flux ropes are subject to current-driven instabilities that are crucial in driving plasma eruptions, ejections, and heating. A typical ideal magnetohydrodynamics instability developing in flux ropes is the helical kink, which twists the flux rope axis. The growth of this instability can trigger magnetic reconnection, which can explain the formation of chromospheric jets and spicules, but its development has never been investigated in a partially ionized plasma (PIP). Here, we study the kink instability in PIP to understand how it develops in the solar chromosphere, where it is affected by charge-neutral interactions. Partial ionization speeds up the onset of the nonlinear phase of the instability, as the plasma β of the isolated plasma is smaller than the total plasma β of the bulk. The distribution of the released magnetic energy changes in fully ionized plasma and PIP, with a larger increase in internal energy associated with the PIP cases. The temperature in PIP increases faster also due to heating terms from the two-fluid dynamics. PIP effects trigger kink instability on shorter time scales, which is reflected in more explosive chromospheric flux rope dynamics. These results are crucial to understanding the dynamics of small-scale chromospheric structures—minifilament eruptions—that thus far have been largely neglected but could significantly contribute to chromospheric heating and jet formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Relativistic Magnetohydrodynamic Simulations of Giant Magnetar Bursts

Gradual crustal deformation can generate strongly twisted magnetic fields around magnetars, potentially triggering giant flares with total energies exceeding 10 44 erg. In this letter, we present the first relativistic magnetohydrodynamic simulation of a surface shear-driven magnetar eruption, capturing reconnection-driven plasma heating, the ejection of relativistically hot plasma, and the formation of a hot fireball confined within the inner magnetosphere. We find that magnetic reconnection in the equatorial current sheet launches a hot trailing outflow capable of powering the initial spike observed in giant flares, while simultaneously leaving behind a thermally stratified fireball with sufficient thermal energy to produce the pulsating, decaying tail. Together, these features provide a self-consistent physical framework for understanding the observed energetics of magnetar giant flares. The eruption also expels a magnetically dominated giant plasmoid carrying up to ∼9% of the magnetosphere’s total magnetic energy. Furthermore, our simulation demonstrates how the plasmoid drives the formation of a blast wave—an important ingredient in models linking magnetar eruptions to fast radio bursts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Kinematic flow from the flow of cuts

The wavefunction coefficients of conformally coupled scalars in power-law FRW cosmologies satisfy differential equations governed by a set of simple combinatorial rules known as the kinematic flow. In this paper we derive the kinematic flow, expressed using a set of differential forms referred to as the cut basis, from a geometric perspective, relying solely on the cosmological hyperplane arrangement and without invoking bulk physics. Each element of the cut basis corresponds to the positive geometry associated to an independent cut of the physical FRW-form and can be labeled by decorating (minors of) the truncated Feynman graph with an acyclic orientation. We provide a straightforward prescription to associate a logarithmic differential form to each element of the cut basis by considering its corresponding decorated graph. Moreover, we show that the residues of the physical FRW-form are canonical forms of certain graphical zonotopes labeled by the same set of decorated graphs. These zonotopes control the cut combinatorics -- flow of cuts -- of the physical FRW-form and the cut basis (by construction). Using the theory of relative twisted cohomology and intersection theory, we derive a closed form formula for the differential equations of the cut basis. We also introduce combinatorial rules that compute the kinematic differential of any basis element without explicit calculation. The combinatorics of our differential equations is a natural consequence of the flow of cuts and is equivalent (up to rescaling) to the kinematic flow for the recently studied time integral basis. In particular, our differential equations decouple into exponentially many sectors, one for each way of cutting a subset of edges of the graph.

General Relativity and Quantum Cosmology↗
DOE OSTI2025

Background-field Method and QCD Factorization

One method for deriving a factorization for QCD processes is to use successive integration over fields in the functional integral. In this approach, we separate the fields into two categories: dynamical fields with momenta above a relevant cutoff, and background fields with momenta below the cutoff. The dynamical fields are then integrated out in the background of the low-momentum background fields. This strategy works well at tree level, allowing us to quickly derive QCD factorization formulas at leading order. However, to extend the approach to higher loops, it is necessary to rigorously define the functional integral over dynamical fields in an arbitrary background field. This framework was carefully developed for the calculation of the effective action in a background field at the two-loop level in the classic paper by Abbott «The Background Field Method Beyond One Loop», Nucl. Phys. B 185 , 189 (1981). Building on this work, I specify the renormalized background-field Lagrangian and define the notion of the quantum average of an operator in a background field, consistent with the “separation of scales” scheme mentioned earlier. As examples, I discuss the evolution of the twist-2 gluon light-ray operator and the one-loop gluon propagator in a background field near the light cone.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

First Global Extraction of the Worm-gear TMD g 1 T

In these proceedings, we report on the first simultaneous extraction of the worm-gear function g 1 T , one of the eight leading-twist TMDs. The study analyzes COMPASS, HERMES and JLab semi-inclusive deep-inelastic scattering data using Monte Carlotechniques. We also provide a comparison of g 1 T obtained from this experimental data with a large N c analysis, the Wandzura–Wilczek-type approximation, and lattice QCD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Replication Data for: Deconstructing Chirality: Probing Local and Non-local Effects in Azobenzene Derivatives with X-ray Circular Dichroism

Resolving molecular chirality at the atomic scale remains a critical challenge in chemistry. Conventional Optical Circular Dichroism spectroscopy often overlooks subtle and localized structural features. Here, we computationally investigate site-specific X-ray Circular Dichroism (XCD) across a series of trans-azobenzene derivatives to deconstruct and interpret chiroptical signals at the atomic level. Our modeling reveals that XCD is capable of distinguishing dichroic contributions arising from both a local chiral center and global molecular twist, revealing their intricate interplay and potential for constructive or destructive interference. We show that sterically-induced global distortions can dominate the XCD signal in some cases, even suppressing the response from the chiral center itself. This insight suggests a new molecular design principle for tuning chiroptical activity, which we extend by proposing strategies to achieve unidirectional photoisomerization through steric gearing. Altogether, this work establishes a quantitative framework for engineering chiroptical responses, laying the foundation for the design of functional chiral systems utilizing principles of unidirectional molecular motor-like conformational dynamics.

Chemistry↗
DOE OSTI2021

Low-field-orientation effect on REBCO tape performance and its power cable application

Low field characteristics, including field orientation dependence relations for four different commercially available REBCO tapes, were investigated in an external field of up to 0.3 T at 77 K. A design method of the performance of a twisted stacked-tape conductor (TSTC) has been developed for a power transmission line. Cable critical current is obtained from an averaged self-field distributed over the cable cross section and the minimum critical current obtained from the field orientation dependence in transverse fields experimentally measured for the single tapes. The performance of three types of TSTCs, i.e., single-, double-, and triple-channel configurations, has been assessed for the four REBCO tapes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗