SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We describe the synthesis of Fe( ii )-based coordination cages whose stability and gas adsorption properties can be tuned through structural modifications and redox reactivity.
Studies of active particle systems have demonstrated that particle anisotropy can impact the collective behavior of a system, motivating a systematic study. Here, we report a systematic computational investigation of the role of anisotropy in shape and active force director on the collective behavior of a two-dimensional active colloidal system. We find that shape and force anisotropy can combine to produce critical densities both lower and higher than those of disks. Furthermore, we demonstrate that changing particle anisotropy tunes what we define as a “collision efficiency” of inter-particle collisions in leading to motility-induced phase separation (MIPS) of the system. We use this efficiency to determine the relative critical density across systems. Additionally, we observe that local structure in phase-separated clusters is the same as the particle's equilibrium densest packing, suggesting a general connection between equilibrium behavior and non-equilibrium cluster structure of self-propelled anisotropic particles. In engineering applications for active colloidal systems, shape-controlled steric interactions such as those described here may offer a simple route for tailoring emergent behaviors.
Straightforward ligand functionalization can be utilized to tune the properties of iron( iii ) metal–organic frameworks.
Molecular weight distribution imposes considerable influence on the properties of polymers, making it an important parameter, impacting morphology and structural behavior of polymeric materials. Atom transfer radical polymerization (ATRP) has established itself as a powerful tool to prepare polymers with predetermined molecular weight, preserved chain-end functionality, and low dispersity. More recently, ATRP has also been shown to provide a means to deliberately broaden molecular weight distributions, and, via retaining living chain-ends, to enable the formation of block copolymers with designed block dispersity, featuring new microstructures and potentially attractive properties. Here, similar methodologies have been developed to facilitate tuning of the dispersity of polymeric brushes grown from nanoparticles thus resulting in hybrid materials with enhanced fracture toughness and high inorganic content. Recent advances have given access to brush architectures comprised of uni- and bimodal block copolymers with unique morphologies along with interesting mechanical, thermal, and optical properties.
Ambient-pressure ozone treatment can tune oxygenation/deoxygenation reaction kinetics enabling the accessibility of Fe( iv ) oxides with nearly zero oxygen vacancy.
Meeting our rising demand for clean energy carriers such as H 2 from renewable biomass resources is challenged by the co-emission of CO 2 and CH 4 . To address this challenge, we design novel reactive separation pathways that integrate multiphase chemical reactions by harnessing Ca and Mg bearing minerals as a sorbent to capture CO 2 released during the hydrothermal deconstruction of aqueous biomass oxygenates to produce H 2 and solid carbonates via low temperature aqueous phase reforming and thermodynamically downhill carbon mineralization. Earth abundant catalysts such as Ni/Al 2 O 3 are effective in producing H 2 yields as high as 79% and 74% using ethylene glycol and methanol in the presence of Ca(OH) 2 as an alkaline sorbent, without contaminating or deactivating the catalyst. H 2 yields with in situ carbon mineralization using a Ni or Pt/Al 2 O 3 catalyst are enhanced based on the following order of reactivity: acetate < glycerol < methanol < formate < ethylene glycol. These studies demonstrate that the multiphase chemical interactions can be successfully tuned to enhance H 2 yields through the selective cleavage of C–C bonds using Ni/Al 2 O 3 catalysts to deconstruct biomass oxygenates for producing H 2 and CO 2 , and in situ carbon mineralization by harnessing abundant alkaline materials, as demonstrated using ladle slag. This approach unlocks new scientific possibilities for harnessing multiple emissions including abundant organic-rich wastewater streams and alkaline industrial residues to co-produce low carbon H 2 and carbonate-bearing materials for use in construction by using renewable solar thermal energy resources.
Creating dual-atom active sites in host metals allows tuning of chemical properties through electronic effects and ensemble effects. In particular, some dual-atom alloys feature molecular-like electronic states.
Correction for ‘Tuning the melting point of selected ionic liquids through adjustment of the cation’s dipole moment’ by Brooks D. Rabideau et al. , Phys. Chem. Chem. Phys. , 2020, 22 , 12301–12311, https://doi.org/10.1039/D0CP01214A.
Here, we demonstrate that active site ensembles on transition metal phosphides tune the selectivity of the nitrate reduction reaction. Using Ni 2 P nanocrystals as a case study, we report a mechanism involving competitive co-adsorption of H* and NO x * intermediates. A near 100% faradaic efficiency for nitrate reduction over hydrogen evolution is observed at -0.4 V, while NH 3 selectivity is maximized at -0.2 V vs. RHE.
Over the past two decades, significant progress in two-dimensional (2D) materials has invigorated research in condensed matter and material physics in low dimensions. While traditionally studied in three-dimensional systems, magnetism has now been extended to the 2D realm. Recent breakthroughs in 2D magnetism have attracted substantial interest from the scientific community, owing to the stable magnetic order achievable in atomically thin layers of the van der Waals (vdW)-type layered magnetic materials. These advances offer an exciting platform for investigating related phenomena in low dimensions and hold promise for spintronic applications. Consequently, vdW magnetic materials with tunable magnetism have attracted significant attention. Specifically, antiferromagnetic metal thiophosphates MPX 3 (M = transition metal, P = phosphorus, X = chalcogen) have been investigated extensively. These materials exhibit long-range magnetic order spanning from bulk to the 2D limit. The magnetism in MPX 3 arises from localized moments associated with transition metal ions, making it tunable via substitutions and intercalations. In this review, we focus on such tuning by providing a comprehensive summary of various metal- and chalcogen-substitution and intercalation studies, along with the mechanism of magnetism modulation, and a perspective on the development of this emergent material family.
Substituents can strongly affect electric and thermoelectric properties of molecular junctions (MJs) by tuning quantum interference (QI) in MJs.
Experimental and theoretical study of [Ga 4 L 6 ] 12− and [In 4 L 6 ] 12− investigating guest encapsulation. Our study reveals that solvent composition, crucially affects entropy and guest binding, opening the door for tuning host–guest interactions.
The reversibility of phase transformation influences the functionality of electrode materials in batteries. In many battery materials, nanosized grains favor phase reversibility but at the cost of cyclability due to aggravated side reactions with the electrolyte. Here, in this study, we present a novel approach to enhance the phase transformation reversibility of layered oxide cathodes, exemplified by Na 2/3 Fe 1/2 Mn 1/2 O 2 through proton irradiation. In addition to forming defects, proton irradiation at sufficiently high doses can subdivide single grains into multiple nanodomains without physically rupturing them. Hence, the single grains of the material assume a pseudo-secondary particle nature without reducing the overall grain size. Preserving the grain size is advantageous, as it reduces side reactions, which is not possible with conventional grain size reduction methods. While chemical transformations and defect formation induced through proton irradiation can influence the stability of battery materials, it is expected that structural reorganization due to cycling-induced phase transformation will be contained within these nanodomains. Such confinement of phase transformation is potentially responsible for enhancing the reversibility of layered oxide materials in our study. Thus, our study suggests that grain subdivision could become an effective microstructure tuning strategy for managing electrochemical cycling-induced phase changes in battery electrodes.
Polymer-ceramic composite electrolytes (CPE) have emerged as promising replacements for currently used liquid organic electrolytes, which pose as safety hazards, in Li-ion batteries. Limits in conductivity enhancement in CPEs is often attributed to a high resistance for Li-ion transport along the interface due to the incompatibility of the polymer and ceramic phases. A clear understanding of the interfacial structure and how this impacts interfacial Li-ion transport is needed in order to efficiently design a CPE with optimal ionic conductivity. In this study, density functional theory (DFT) calculations, in conjunction with scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS), are used to unveil the bulk and surface structure of La0.5Li0.5−xMxTiO3 (M = Na, K) (LMTO) nanorods, a newly-reported ceramic system with promising applications in CPEs, and the LMTO interactions with the poly(lithium sulfonyl (trifluoromethane sulfonyl)imide methacrylate) (p(MTFSILi)) polymerized ionic liquid. Substitution of lithium for sodium and potassium onto the A-site perovskite lattice is shown to increase the stability of the preferred pseudocubic perovskite phase because of their increased cation size which allows them to reduce the TiO6 octahedral rotations in the bulk and at the surface. STEM and EELS results show that LMTO nanorods with differing compositions have Ti-enriched (110)-oriented surfaces. Increased sodium and potassium compositions in LMTO is also shown using the DFT calculations to weaken the binding of the lithium atom to the MTFSI unit when LiMTFSI is adsorbed to the LMTO surface. This weakening of lithium binding to the polymer at the LMTO interface indicates that the lithium mobility is increased, correlating to an increase in interfacial Li-ion transport. Overall, this work provides insights into how to tune the interfacial interactions between the polymer (p(MTFSI)) and ceramic (LMTO) for optimal CPE design.
In this work we study the stellar mass–metallicity relation (MZR) of an extended sample of star-forming galaxies in the local Universe and its possible dependence on the star formation rate (SFR). We selected a sample of approximately 195 000 Sloan Digital Sky Survey (SDSS) star-forming galaxies up to z = 0.22 with the aim of analysing the behaviour of the MZR with respect to SFR whilst taking into account the age of their stellar populations. For the first time, with this sample, we obtained aperture corrected oxygen and nitrogen-to-oxygen abundances (O/H and N/O, respectively) and SFR using the empirical prescriptions from the Calar Alto Legacy Integral Field Area (CALIFA) survey. To perform this study we also make use of the stellar mass of the galaxies and the parameter Dn(4000) as a proxy for the age of the stellar population. We derive a robust MZR locus, which is found to be fully consistent with the ‘anchoring’ points of a selected set of well-studied nearby galaxies for which the chemical abundance has been derived using the direct method. We observe a complex relation between MZR and SFR across the whole range of galaxy mass and metallicity, where the slope changes seen in the O/H–SFR plane present a pattern that seems to be tuned to the stellar age of the galaxies, and therefore stellar age has to be taken into account in the stellar mass–metallicity–SFR relation. In order to provide an answer to the question of whether or not the MZR depends on the SFR, it is essential to take into account the age of the stellar populations of galaxies. A strong dependence of the MZR on SFR is observed mainly for star-forming galaxies with strong SFR values and low D n (4000). The youngest galaxies of our SDSS sample show the highest SFR measured for their stellar mass.
We demonstrate reversible tuning of a photonic crystal cavity resonance using a thin photochromic film composed of spiropyran and polymethylmethacrylate that serves as a photosensitive cladding layer. Exposure of spiropyran to ultraviolet light results in smooth redshift of the cavity resonance that can be reversed by exposure to visible wavelength light. We achieve a reversible resonance shift of up to 2.7 nm, which can be performed locally on individual cavities. The resonance shift over multiple successive UV and visible light exposures is studied to determine the repeatability of the photochromic film.
The automotive engine performance tune-up is greatly affected by the calibration of its electronic control unit (ECU). The ECU calibration is traditionally done by trial-and-error method. This traditional method consumes a large amount of time and money because of a large number of dynamometer tests. To resolve this problem, case based reasoning (CBR) is employed, so that an existing and effective ECU setup can be adapted to fit another similar class of engines. The adaptation procedure is done through a more sophisticated step called case-based adaptation (CBA)[1, 2]. CBA is an effective knowledge management tool, which can interactively learn the expert adaptation knowledge. The paper briefly reviews the methodologies of CBR and CBA. Then the application to ECU calibration is described via a case study. With CBR and CBA, the efficiency of calibrating an ECU can be enhanced. A prototype system has also been developed to verify the usefulness of CBR in ECU calibration.
The electrical resistance of nanoporous gold prepared by dealloying is tuned by charging the surfaces of the porous structure in an electrolyte. Reversible variations in the resistance up to approximately 4% and 43% occur due to charging in the regimes of double layer charging and specific adsorption, respectively. Charging-induced variations in the electron density or of the volume cannot account for the resistance variation, indicating that this variation is primarily caused by charge-induced modifications of the charge carrier scattering at the solid-electrolyte interface. The relative resistance variation in nanoporous Au with surface charging is found to be much higher than reported for porous nanocrystalline Pt. This is due to the lesser resistance contribution from internal grain boundaries. The resistance variation in nanoporous Au is also higher than that found in thin films owing to the stronger surface scattering in the ligament structure compared to plan surfaces. We argue that the strong resistance variation in up to 43% in the regime of specific adsorption is due to the reversible formation of a chemisorbed surface layer acting as scattering centers for the charge carriers.