Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Shaped cutting tool

A cutting tool for forming a finished part from a rotating workpiece includes a first cutting edge extending from a first end of the cutting tool, a second cutting edge extending from a second end of the cutting tool, and a shaping edge disposed between the first cutting edge and the second cutting edge. The first cutting edge is operable to remove a trailing end of the rotating workpiece and the second cutting edge is operable to remove a working portion of the rotating workpiece disposed between the trailing end and a leading end. The shaping edge is operable to shape the working portion of the rotating workpiece by advancing the cutting tool into the rotating workpiece until the first cutting edge removes the trailing end of the rotating workpiece and the second cutting edge removes the working portion of the rotating workpiece to form the finished part.

42 ENGINEERING↗

Modifications to the runner blade to Improve Off - Design Efficiencies of Hydraulic Turbines

Hydroturbines are known to have very high efficiency at their best efficiency point (BEP). However, it has become increasing beneficial to run some hydroturbines at conditions that are significantly different than BEP. This is a direct result of volatile price fluctuations on the electric market, limited storage capabilities, and environmental rules and regulations. Running the hydroturbine at off-design conditions can result in a significant amount of residual swirl in the draft tube. The presence of this residual swirl is particularly detrimental to the performance of Francis hydroturbines since they rely on a pressure head to generate power. Previous research at The Pennsylvania State University numerically discovered that injecting water through the trailing edge of the wicket gates could change the bulk flow direction upstream of the runner blades. In this manner, the flow rate and swirl angle entering the runner blade could be altered to limit residual swirl in the draft tube. The research determined that properly tuned jets could result in a significant improvement in turbine efficiency when the hydroturbine was operating at low flow. However, this required pumping water through channels into a region of relatively high pressure. This pump requirement lessened the effectiveness of the wicket gate trailing edge injection. The concept of water jet injection was further explored in the present work. However, instead of injecting water into a region of relatively high pressure, water jets were placed at the trailing edge of the runner blades where there is a region of relatively low pressure. It was determined that, although this water jet injection improved the off-design efficiency of a low flow case by 0.8%, the hydroturbine now required a larger head in order to maintain the flow rate. The present work found no increase in efficiency for the high flow case with the added water jet injection technique.

13 HYDRO ENERGY↗

Blades and systems with forward blowing slots

A blade for use in a wind turbine comprises a pressure side and suction side meeting at a trailing edge and leading edge. The pressure side and suction side provide lift to the turbine blade upon the flow of air from the leading edge to the trailing edge and over the pressure side and suction side. The blade includes one or more openings at the suction side, in some cases between the leading edge and the trailing edge. The one or more openings are configured to provide a pressurized fluid towards the leading edge of the blade, in some cases at an angle between about 0° and 70° with respect to an axis oriented from a centerline of the blade toward the leading edge.

Zuteck, Michael D.↗

Divergent responses of spring phenology to daytime and nighttime warming

Spring phenology (i.e., start of season, SOS) has shifted earlier in response to warmer temperatures. However, the respective influences of daytime and nighttime temperatures on SOS changes remain poorly understood. Here we characterized the responses of satellite-derived SOS to minimum temperature (Tmin) and maximum temperature (Tmax) across Appalachian Trail regions in the Eastern United States during 2000-2013. We found SOS responded differently to Tmin and Tmax at 81.5% of the study area. Furthermore, the SOS responses to Tmin and Tmax both changed across space, and specifically, these two responses showed significant divergent trends from cold to warm regions (P<0.001). We propose a new framework utilizing both Tmin and Tmax, instead of daily average temperature, in modeling phenology. This study, for the first time, disentangled phenological responses to daytime temperature from nighttime temperature across a wide range of temperatures. The findings suggest that model projections of future phenological changes should incorporate the divergent phenology responses to daytime and nighttime temperatures, in order to improve the representation of land-atmosphere interactions in Earth system models in light of asymmetric diurnal warming.

asymmetric warming, temperature sensitivity, Appal↗

Airframe Noise

Current understanding of airframe noise was reviewed as represented by experiment at model and full scale, by theoretical modeling, and by empirical correlation models. The principal component sources are associated with the trailing edges of wing and tail, deflected trailing edge flaps, flap side edges, leading edge flaps or slats, undercarriage gear elements, gear wheel wells, fuselage and wing boundary layers, and panel vibration, together with many minor protrusions like radio antennas and air conditioning intakes which may contribute significantly to perceived noise. There are also possibilities for interactions between the various mechanisms. With current engine technology, the principal airframe noise mechanisms dominate only at low frequencies, typically less than 1 kHz and often much lower, but further reduction of turbomachinery noise in particular may make airframe noise the principal element of approach noise at frequencies in the sensitive range.

Trailing-Edge↗

Anti-Phase Vortex Reduction Control for Rotor Noise Suppression

An investigation is conducted in 2019 under the NASA Ames Center Innovation Funds (CIF) project entitled “Anti-Phase Vortex Reduction Control for Rotor Noise Suppression“ to experimentally validate an anti-phase rotor noise suppression concept. The first objective of the investigation is to conduct computational fluid dynamics (CFD) simulations to investigate the noise characteristics of several anti-phase rotor designs. The second objective is to conduct a series of acoustic tests of anti-phase rotors in an anechoic chamber at Pennsylvania State University (PSU) to evaluate the merit of the anti-phase rotor concept. The CFD investigation seeks to optimize the anti-phase alternating trailing edge patterns for rotor noise suppression. The design objective is to maximize the noise reduction while maintaining the aerodynamic thrust. The investigation is performed using a three-dimensional (3D) Unsteady Reynolds-Averaged Navier-Stokes (URANS) commercial solver STAR-CCM+ together with the Ffowcs-Williams and Hawkings (FW-H) formula to obtain the aerodynamic thrust and far-field noise level. An acoustic study is conducted for 13 anti-phase design candidates based on a proprietary rotor design. The CAD geometry of the rotor is furnished by PSU. These design candidates include different alternating trailing edge (TE) waveforms, TE segment lengths, TE deflection amplitudes, and transition characteristics. The best design candidate among those explored is an anti-phase rotor that has a four-period TE waveform which results in a reduction in far-field noise level of 2.1 dB in the hover condition and a reduction of 1.1 dB in the forward flight condition at 9.7 m/s. A further acoustic study is conducted for a different rotor manufactured by APC. Five APC rotor design candidates are simulated. The best anti-phase design candidate for the APC rotor results in a reduction in far-field noise level of 4.0 dB in the hover condition. An in-phase design candidate is also studied. This in-phase design provides a noise reduction of 2.5 dB. A series of acoustic experiments in the PSU anechoic chamber have been conducted in July 2019 and October 2019. Both anti-phase and in-phase rotors fabricated for the left-hand and right-hand rotations are tested. In the hover condition, all the rotors do not provide sufficient evidence of improved acoustic performance. However, the experimental data in the hover condition are deemed to be inconclusive due to the flow recirculation in the anechoic chamber caused by the rotor downwash. In the forward flight condition at 9.7 m/s, the anti-phase right-hand rotor produces a noise reduction by as much as 6.5 dB in the frequency range of 2000-4000 Hz, while the in-phase right-hand rotor produces a noise reduction by as much as 5 dB in the same frequency range. Both the anti-phase and in-phase left hand rotors offer no evidence of noise reduction. The difference in the acoustic performance of the left-hand and right-hand rotors could be explained by the location of the microphone array which is placed to the left side of the rotors. This microphone array location could create a bias in the sound pressure level in favor of the right-hand rotor. Using the average noise reduction values, the anti-phase 4H rotor could offer a noise reduction by as much as 3.25 dB while the in-phase 4I rotor could produce up to a 2.5 dB noise reduction. Both the computational and experimental results have provided sufficient evidence to support the noise suppression capability of the proposed anti-phase rotor concepts.

Rotor noise↗

Interfacial Characteristics Investigation for One-Step EDM Drilling of Cooling Holes in TBCs

In this study, the one-step electrical discharge machining of inclined cooling holes is performed in thermal-barrier-coated nickel-based superalloys via the assisting electrode method. The effects of the process parameters, including the inclination angle, peak current, pulse duration, and duty cycle, on interfacial characteristics of cooling holes were investigated. The research results are as follows: After machining, the hardness of TBCs increases slightly and the adhesion strength of ceramic coating has a slight reduction. Delamination prevailingly appears at the ceramic coating/bonding coating interface, and its length at the trailing edge is greater than that at the leading edge. Increasing either the discharge energy or the duty cycle also aggravates the severity of the delamination. Under an excessive peak current of 22.5 A, the complete spalling of the ceramic coating occurs in the vicinity of the holes. Additionally, a reduction in the inclination angle results in a significant increase in delamination cracking and poorer interface integrity. The interfacial microstructure features of the holes vary with the inclination angle. The large-scale spalling of ceramic coating is prone to occur at the trailing edge when using an inclination angle of 30°. The spattering is susceptible to appear at the entrance of the holes under inclination angles of 60° and 75°, and its composition is primarily Ni, C, Zr, Cr, Nb, Fe, and Cu.

36 MATERIALS SCIENCE↗

Relationship Between γ′ Phase Degradation and In-Service GTD-111 First-Stage Blade Local Temperature

The Ni-based superalloy GTD-111 is used in manufacturing of first-stage blades for industrial gas turbines due to its high stability and strength at high temperatures. The remarkable properties of this alloy are related to its suitable microstructure obtained by the precipitation hardening mechanism. The microstructure of superalloys nevertheless degrades when they are exposed to long-term service. In this paper, the microstructure of a service-exposed GTD-111 blade was evaluated at different positions along the airfoil. Pores, carbides, eta and γ′ phases were analyzed. As a result of this study, it was found that only the γ′ phase exhibited significant differences in size and shape. The coalescence and coarsening of the γ′ phase near to the trailing edge tip were evident, which may be related to the typical failure of the blade in this region. Based on the Ostwald ripening theory, coarsening of this phase was used to calculate the in-service temperatures in the airfoil. In five locations of the trailing edge, temperature was found to vary from 679 to 961 °C.

36 MATERIALS SCIENCE↗

A smoothed particle hydrodynamics model for droplet and film flow on smooth and rough fracture surfaces

Flow on fracture surfaces has been identified by many authors as an important flow process in unsaturated fractured rock formations. Given the complexity of flow dynamics on such small scales, robust numerical methods have to be employed in order to capture the highly dynamic interfaces and flow intermittency. In this work we present microscale free-surface flow simulations using a three-dimensional multiphase Smoothed Particle Hydrodynamics (SPH) code. Pairwise solid-fluid and fluid-fluid interaction forces are used to control the wetting behavior and cover a wide range of static and transient contact angles as well as Reynolds numbers encountered in droplet flow on rock surfaces. We validate our model via comparison with existing empirical and semi-analyical solutions for droplet flow. We use the model to investigate the occurence of adsorbed trailing films of droplets under various flow conditions and its importance for the flow dynamics when films and droplets coexist. We show that flow velocities are higher on prewetted surfaces covered by a thin film which is qualitatively attributed to the enhanced dynamic wetting and dewetting at the trailing and advancing contact line.

unsaturated flow, fractured rocks, smoothed partic↗

A xenograft model reveals that PU.1 functions as a tumor suppressor for multiple myeloma in vivo

We previously demonstrated that PU.1 expression is down-regulated in the majority of myeloma cell lines and primary myeloma cells from patients. We introduced the tet-off system into the human myeloma cell lines U266 and KMS12PE that conditionally express PU.1 and demonstrated that PU.1 induces cell cycle arrest and apoptosis in myeloma cells in vitro. Here, we established a mouse xenograft model of myeloma using these cell lines to analyze the effects of PU.1 on the phenotype of myeloma cells in vivo. When doxycycline was added to the drinking water of mice engrafted with these myeloma cells, all mice had continuous growth of subcutaneous tumors and could not survived more than 65 days. In contrast, mice that were not exposed to doxycycline did not develop subcutaneous tumors and survived for at least 100 days. We next generated mice engrafted with subcutaneous tumors 5–10 mm in diameter that were induced by exposure to doxycycline. Half of the mice stopped taking doxycycline-containing water, whereas the other half kept taking the water. Although the tumors in the mice taking doxycycline continued to grow, tumor growth in the mice not taking doxycycline was significantly suppressed. The myeloma cells in the tumors of the mice not taking doxycycline expressed PU.1 and TRAIL and many of such cells were apoptotic. Moreover, the expression of a cell proliferation marker Ki67 was significantly decreased in tumors from the mice not taking doxycycline, compared with that of tumors from the mice continuously taking doxycycline. The present data strongly suggest that PU.1 functions as a tumor suppressor of myeloma cells in vivo. - Highlights: • PU.1 suppresses xenograft myeloma cell growth and prolongs survival periods of mice. • PU.1 induces TRAIL expression and apoptosis in myeloma cells in vivo. • PU.1 suppresses Ki67 expression in myeloma cells in vivo. • Up-regulation of PU.1 is a promising strategy for generating anti-myeloma agents.

60 APPLIED LIFE SCIENCES↗

On the effects of reactant stratification and wall curvature in non-premixed rotating detonation combustors

The optimization of non-premixed rotating detonation combustors (RDCs) requires improved understanding of the coupled effects of reactant stratification, fluid property gradients, and complex shock-wave interactions on the detonation wave structure within annular geometries. In the current work, simultaneous orthogonal views of chemiluminescence and hydroxyl planar laser-induced fluorescence (PLIF) are utilized to establish the existence of a dual-wave system characterized by leading and trailing detonation waves that are closely coupled by the local flow physics. These features are persistent over a wide range of mass flow rates and are consistent with prior observations of non-premixed rotating detonations in annular geometries. The detailed instantaneous time sequences are compared with a 3D reactive unsteady Reynolds averaged Navier-Stokes (URANS) simulation to more clearly elucidate the in-situ combustion dynamics and the sensitivity to reactant inlet conditions. It is found that the dual-wave system results from unburned reactants that survive the leading detonation wave in the injector near field and are consumed within a trailing azimuthal reflected-shock combustion (ARSC) zone. By contrast, the injector far field is characterized by rapid mixing due to a sudden drop to subsonic conditions, and the bifurcated detonation wave structure collapses into a stronger, single-wave detonation front with higher overall pressure ratio as compared with the dual-wave system. While each RDC will have different inflow, mixing, and combustion characteristics, the underlying interactions between the stratified reactants and azimuthal wave dynamics identified through the combination of advanced MHz-rate diagnostics and 3D numerical simulations have important implications for the study of detonation wave stability, mode transition, and combustion efficiency in non-premixed annular RDCs.

3D URANS↗

Environmental impact assessment of mountain tourism in developing regions: A study in Ladakh, Indian Himalaya

Mountain tourism in developing countries is becoming a growing environmental concern due to extreme seasonality, lack of suitable infrastructures and planning, and interference with fragile ecosystems and protected areas. This paper presents a study devoted to assess the adverse environmental impacts of tourism, and in particular of trekking-related activities, in Ladakh, Indian Himalaya. The proposed approach is based on the use of Geographical Information System (GIS) modeling and remote sensing imageries to cope with the lack of data that affect the region. First, stressors associated with trekking, and environmental receptors potentially affected were identified. Subsequently, a baseline study on stressors (trail use, waste dumping, camping, pack animal grazing and off-road driving) and receptors (soil, water, wildlife, vegetation) was conducted through field work, data collection, and data processing supported by GIS. Finally, impacts were modeled by considering the intensity of the stressors, and the vulnerability and the value of the receptors. The results were spatially aggregated into watershed units, and combined to generate composite impact maps. The study concluded that the most affected watersheds are located in the central and southeastern part of Ladakh, along some of the most visited trails and within the Hemis and the Tsokar Tsomoriri National parks. The main objective of the study was to understand patterns of tourism-induced environmental degradation, so as to support mitigation interventions, as well as the development of suitable tourism policies.

54 ENVIRONMENTAL SCIENCES↗

Development of thin-gap GEM- μ RWELL hybrid detectors

Micro Pattern Gaseous Detectors (MPGDs) are used for tracking in High Energy Physics and Nuclear Physics because of their large area, excellent spatial resolution capabilities and low cost. However, for high energy charged particles impacting at a large angle with respect to the axis perpendicular to detector plane, the spatial resolution degrades significantly because of the long trail of ionization charges produced in clusters all along the track in the drift region of the detector. The long ionization charge trail results in registering hits from large number of strips in the readout plane which makes it challenging to precisely reconstruct the particle’s position using simple center of gravity algorithm. As a result, the larger the drift gap, the more severe the deterioration of spatial resolution for inclined tracks. For the same reason, the position resolution is also severely degraded in a large magnetic field, where the Lorentz E x B effect causes the ionization charges to follow a curved and longer path in the detector gas volume. In this paper, we report on the development of thin-gap MPGDs as a way to maintain excellent spatial resolution capabilities of MPGD detectors over a wide angular range of incoming particles. In a thin-gap MPGD, the thickness of the gas volume in the drift region is reduced from typically 3 mm to 1 mm or less. We present preliminary test beam results demonstrating the improvement in spatial resolution from 400 m with a standard 3 mm gap μ RWELL prototype to ~140 μ m with a double amplification GEM- μ RWELL thin-gap hybrid detector. Here, we also discuss the impact of a thin-gap drift volume on other aspects of the performance of MPGD technologies such as the efficiency and detector stability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Amazon boundary layer aerosol concentration sustained by vertical transport during rainfall

The nucleation of atmospheric vapours is an important source of new aerosol particles that can subsequently grow to form cloud condensation nuclei in the atmosphere. Most field studies of atmospheric aerosols over continents are influenced by atmospheric vapours of anthropogenic origin and, in consequence, aerosol processes in pristine, terrestrial environments remain poorly understood. The Amazon rainforest is one of the few continental regions where aerosol particles and their precursors can be studied under near-natural conditions, but the origin of small aerosol particles that grow into cloud condensation nuclei in the Amazon boundary layer remains unclear. Here we present aircraft- and ground-based measurements under clean conditions during the wet season in the central Amazon basin. We find that high concentrations of small aerosol particles (with diameters of less than 50 nanometres) in the lower free troposphere are transported from the free troposphere into the boundary layer during precipitation events by strong convective downdrafts and weaker downward motions in the trailing stratiform region. Lastly, this rapid vertical transport can help to maintain the population of particles in the pristine Amazon boundary layer, and may therefore influence cloud properties and climate under natural conditions.

54 ENVIRONMENTAL SCIENCES↗

X-ray Emission from Electron Betatron Motion in a Laser-Plasma Accelerator

Single-shot x-ray spectra from electron bunches produced by a laser-plasma wakefield accelerator (LPA) were measured using a photon-counting single-shot pixelated Silicon-based detector [3], providing for the first time direct spectra without assumptions required by filter based techniques. In addition, the electron bunch source size was measured by imaging a wire target, demonstrating few micron source size and stability. X-rays are generated when trapped electrons oscillate in the focusing field of the wake trailing the driver laser pulse. In addition to improving understanding of bunch emittance and wake structure, this provides a broadband, synchronized femtosecond source of keV x-rays. Electron bunch spectra and divergence were measured simultaneously and preliminary analysis shows correlation between x-ray andelectron spectra. Bremsstrahlung background was managed using shielding and magnetic diversion.

43 PARTICLE ACCELERATORS↗

Colliding Laser Pulses for Laser-Plasma Accelerator Injection Control

Decoupling injection from acceleration is a key challenge to achieve compact, reliable, tunable laser-plasma accelerators (LPA). In colliding pulse injection the beat between multiple laser pulses can be used to control energy, energy spread, and emittance of the electron beam by injecting electrons in momentum and phase into the accelerating phase of the wake trailing the driver laser pulse. At LBNL, using automated control of spatiotemporal overlap of laser pulses, two-pulse experiments showed stable operation and reproducibility over hours of operation. Arrival time of the colliding beam was scanned, and the measured timing window and density of optimal operation agree with simulations. The accelerator length was mapped by scanning the collision point.

43 PARTICLE ACCELERATORS↗

Nonstationary oscillation of gyrotron backward wave oscillators with cylindrical interaction structure

The nonstationary oscillation of the gyrotron backward wave oscillator (gyro-BWO) with cylindrical interaction structure was studied utilizing both steady-state analyses and time-dependent simulations. Comparisons of the numerical results reveal that the gyro-BWO becomes nonstationary when the trailing field structure completely forms due to the dephasing energetic electrons. The backward propagation of radiated waves with a lower resonant frequency from the trailing field structure interferes with the main internal feedback loop, thereby inducing the nonstationary oscillation of the gyro-BWO. The nonstationary gyro-BWO exhibits the same spectral pattern of modulated oscillations with a constant frequency separation between the central frequency and sidebands throughout the whole system. The frequency separation is found to be scaled with the square root of the maximum field amplitude, thus further demonstrating that the nonstationary oscillation of the gyro-BWO is associated with the beam-wave resonance detuning.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dissipative particle dynamics simulations of deformation and aggregation of healthy and diseased red blood cells in a tube flow

In this paper, we report simulation results assessing the deformation and aggregation of mixed healthy and malaria-infected red blood cells (RBCs) in a tube flow. A three dimensional particle model based on Dissipative Particle Dynamics (DPD) is developed to predict the tube flow containing interacting cells. The cells are also modelled by DPD, with a Morse potential to characterize the cell-cell interaction. As validation tests, a single RBC in a tube flow and two RBCs in a static flow are simulated to examine the cell deformation and intercellular interaction, respectively. The study of two cells, one healthy and the other malaria-infected RBCs in a tube flow demonstrates that the malaria-infected RBC (in the leading position along flow direction) has different effects on the healthy RBC (in the trailing position) at the different stage of parasite development or at the different capillary number. With parasitic development, the malaria-infected RBC gradually loses its deformability, and in turn the corresponding trailing healthy RBC also deforms less due to the intercellular interaction. With increasing capillary number, both the healthy and malaria-infected RBCs are likely to undergo an axisymmetric motion. The minimum intercellular distance becomes small enough so that rouleaux is easily formed, i.e., the healthy and malaria-infected RBCs are difficultly disaggregated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗