Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

New level scheme and lifetime measurement of the 13/2 + state in 209 Po

The level structure of 209 Po has been studied by in-beam 𝛾-ray spectroscopy with the 209 Bi ⁢( 6 Li ,𝛼⁢2⁢𝑛) 209 Po reaction at beam energies of 28, 30, 34 MeV. The level scheme of 209 Po is expanded by the 𝛾−𝛾 coincidence measurement, where 27 new transitions and 23 new levels are observed. The lifetimes of 13/2 − , 17/2 − , and 23/2 + states are obtained and are consistent with the previous work, while the one of the 13/2 + state is measured for the first time. A configuration-interaction-shell-model calculation is performed, and its results are compared with the experimental results for 209 Po , with an emphasis on the coupling between the single valence neutron hole and the even-even core of 210 Po . A systematic comparison of the 13/2 + state in N = 125 chain is also studied in the current work.

190 ≤ A ≤ 219↗
DOE OSTI2026

Dynamics of ballistic photocurrents driven by Coulomb scattering in a two-dimensional material

First-principles real-time time-dependent density-functional theory (rt-TDDFT) calculations reveal the existence of ballistic photocurrents generated by Coulomb scattering, which has not previously been considered as a mechanism for the bulk photovoltaic effect. With monolayer GeS as an example, it is predicted that ballistic currents can be comparable to shift currents under experimentally accessible conditions.

2-dimensional systems↗
DOE OSTI2023

Realizing symmetry-protected topological phases in a spin-1/2 chain with next-nearest-neighbor hopping on superconducting qubits

Quantum simulation on near-term quantum hardware is a topic of intense interest. The preparation of novel quantum states of matter provides a quantitative assessment of the capabilities of near-term digital quantum computers to implement circuits with structure of relevance to quantum simulation. Here, we conduct a benchmark study by realizing symmetry-protected topological (SPT) phases of a spin-1/2 Hamiltonian with next-nearest-neighbor hopping on up to 11 qubits on a programmable superconducting quantum processor using adiabatic state preparation. Using recompilation techniques to reduce the gate count to around 50 two-qubit gates, we observe clear signatures of the two distinct SPT phases, such as excitations localized to specific edges and finite string-order parameters. Finally, we identify a parasitic phase associated with the two-qubit gate as the dominant imperfection that limits the depth of the circuits, indicating a research topic of interest for future hardware development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Perturbative model of noisy quantum signal processing

Recent progress in quantum signal processing (QSP) and its generalization, quantum singular value transformation, has led to a grand unification of quantum algorithms. However, inherent experimental noise in quantum devices severely limits the length of realizable QSP sequences. Here, we consider a model of QSP with generic perturbative noise in the signal processing basis and present a diagrammatic notation useful for analyzing such errors. To demonstrate our technique, we study a specific coherent error, that of under- or overrotation of the signal processing operator parametrized by ε<<1. For this coherent error model, it is shown that while Pauli Z errors are not recoverable without additional resources, Pauli X and Y errors can be arbitrarily suppressed by coherently appending a noisy recovery QSP without the use of additional resources or ancillas. Furthermore, through a careful accounting of errors using our diagrammatic tools, we provide an upper and lower bound on the length of this recovery QSP operator. We anticipate that the perturbative technique and the diagrammatic notation proposed here will facilitate future study of generic noise in QSP and quantum algorithms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Halo removal experiments with hollow electron lens in the BNL Relativistic Heavy Ion Collider

A hollow electron beam has been proposed as an active control tool to remove the beam halo from high-energy, high-current hadron or ion machines (such as the High-Luminosity Large Hadron Collider). To study the halo removal rate and assess the effect on the ion beam core, one of the two electron lenses in the Relativistic Heavy Ion Collider was changed from a Gaussian beam profile to a hollow profile. We describe the design and verification of the hollow electron beam parameters as well as the methods to minimize the hollow beam profile distortions, which can result in an ion beam emittance increase. The hollow beam alignment with the ion beam by using a backscattered electron detector has been demonstrated. Furthermore, experiments were carried out to explore the efficiency of the halo removal by scanning the current and inner radius of the hollow electron beam, which is pulsed either every turn or every nth turn. The effects of the hollow electron beam on the ion beam emittance and luminosity were also assessed experimentally by scanning the inner radius of the electron beam.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Demonstration of sub-GV/m accelerating field in a photoemission electron gun powered by nanosecond 𝑋-band radio-frequency pulses

Radio-frequency (rf) photoemission electron guns operating at higher accelerating gradients offer a pathway to produce brighter electron bunches. Brighter beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an rf photoemission electron source supporting an accelerating field close to 400 MV/m at the photocathode surface without major rf breakdown or significant dark current over a 3-week experimental run. This unprecedented gradient was achieved by operating the gun in a new regime with short rf pulses, ~9ns X-band (11.7 GHz). The demonstrated paradigm provides a viable path to form relativistic electron beams with unprecedented brightness.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Quantum Emitter Formation Dynamics and Probing of Radiation-Induced Atomic Disorder in Silicon

Near-infrared color centers in silicon are emerging candidates for on-chip integrated quantum emitters, optical-access quantum memories, and sensing. We access ensemble G-color-center formation dynamics and radiation-induced atomic disorder in silicon for a series of megaelectronvolt proton-flux conditions. The photoluminescence results reveal that the G centers are formed more efficiently by pulsed-proton irradiation than by continuous-wave proton irradiation. The enhanced transient excitations and dynamic annealing within nanoseconds allows optimization of the ratio of G-center formation to nonradiative defect accumulation. The G centers preserve narrow line widths of about 0.1 nm when they are generated by moderate pulsed-proton fluences, while the line width broadens significantly as the pulsed-proton fluence increases. This implies vacancy or interstitial clustering by overlapping collision cascades. The tracking of G-center properties for a series of irradiation conditions enables sensitive probing of atomic disorder, serving as a complementary analytical method for sensing damage accumulation. Aided by ab initio electronic structure calculations, we provide insight into the atomic disorder induced inhomogeneous broadening by introducing vacancies, silicon interstitials, and oriented strain fields in the vicinity of a G center. A vacancy leads to a tensile strain and can result in either a red shift or a blue shift of the G-center emission, depending on its position relative to the G center. Meanwhile, Si interstitials lead to compressive strain, which results in a monotonic red shift. In conclusion, high-flux and tunable ion pulses enable the exploration of the fundamental dynamics of radiation-induced defects as well as methods for the optimization of G-center formation and qubit synthesis for quantum information processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Detection of topology via entanglement oscillations

In this work, we introduce a characterization of topological order based on bulk oscillations of the entanglement entropy and the definition of an “entanglement gap,” showing that it is generally applicable to pure and disordered quantum systems. Using exact diagonalization and the strong disorder renormalization group method, we demonstrate that this approach gives results in agreement with the use of traditional topological invariants, especially in cases where topological order is known to persist in the presence of off-diagonal bond disorder. The entanglement gap is then used to analyze classes of quantum systems with alternating bond types, allowing us to construct their topological phase diagrams. The validity of these phase diagrams is verified in limiting cases of dominant bond types, where the solution is known.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Strain modulation using defects in two-dimensional MoS 2

We investigate the nature of strain in MoS 2 and correlate it to defect types and densities, while systematically assessing the tolerance of this low dimensional material to He and Au ion irradiations. Through a series of theoretical predictions and experimental observations, we establish the onset of the crystalline-to-amorphous transition in MoS 2 and identify sulfur vacancies as the most favorable defects introduced during irradiation. We note the presence of both tensile and compressive strains, which depend on the types of defects introduced into the lattice and vary with increasing fluence. In conclusion, the results show that defects can be used to tune strain in two-dimensional materials and provide an exciting pathway for using external stimuli to control properties of low dimensional materials.

2-dimensional systems↗
DOE OSTI2020

Ultrafast spin-nematic and ferroelectric phase transitions induced by femtosecond light pulses

We report, optically induced phase transitions of the manganite Pr 1/3 Ca 2/3 MnO 3 have been simulated by using a model Hamiltonian that captures the dynamics of strongly correlated charge, orbital, lattice, and spin degrees of freedom. Its parameters have been extracted from first-principles calculations. Beyond a critical intensity of a femtosecond light pulse, the material undergoes an ultrafast and nonthermal magnetic phase transition from a noncollinear to collinear antiferromagnetic phase. The light-pulse excites selectively either a spin-nematic or a ferroelectric phase, depending on the light polarization. The behavior can be traced to an optically induced ferromagnetic coupling between Mn trimers, i.e., polarons which are delocalized over three Mn sites. The polarization guides the polymerization of the polaronic crystal into distinct patterns of ferromagnetic chains determining the target phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous Hall effect in the weak-itinerant ferrimagnet FeCr 2 Te 4

In this study, we carried out a comprehensive study of electronic transport, thermal, and thermodynamic properties in Fe Cr 2 Te 4 single crystals. It exhibits bad-metallic behavior and anomalous Hall effect (AHE) below a weak-itinerant paramagnetic-to-ferrimagnetic transition T c ~ 123 K. The linear scaling between the anomalous Hall resistivity ρ x y and the longitudinal resistivity ρ x x implies that the AHE in Fe Cr 2 Te 4 is most likely dominated by an extrinsic skew-scattering mechanism rather than an intrinsic KL or an extrinsic side-jump mechanism, which is supported by our Berry phase calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Phase coexistence at the first-order Mott transition revealed by pressure-dependent dielectric spectroscopy of κ - (BEDT-TTF) 2 - Cu 2 (CN) 3

The dimer Mott insulator kappa - (BEDT-TTF) 2 - Cu 2 (CN) 3 can be tuned into metallic and superconducting states on applying pressure of 1.5 kbar and more. We have performed dielectric measurements (7.5 kHz to 5 MHz) on kappa - (BEDT-TTF) 2 - Cu 2 (CN) 3 single crystals as a function of temperature (down to T = 8 K) and pressure (up to p = 4.3 kbar). In addition to the relaxor-like dielectric behavior seen below 50 K at p = 0, that moves toward lower temperatures with pressure, a second peak emerges in ε 1 (T) around T = 15 K. When approaching the insulator-metal boundary, this peak diverges rapidly reaching ε 1 ≈ 10 5 . Our dynamical mean-field theory calculations substantiate that the dielectric catastrophe at the Mott transition is not caused by closing the energy gap, but due to the spatial coexistence of correlated metallic and insulating regions. We discuss the percolative nature of the first-order Mott insulator-to-metal transition in all details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Real-space Green's function approach for x-ray spectra at high temperature

There has been considerable interest in properties of condensed matter at high temperature, including nonequilibrium behavior and extreme conditions up to the warm dense matter regime. Such behavior is encountered, e.g., in experimental time-resolved x-ray absorption spectroscopy in the presence of intense laser fields. In an effort to simulate such behavior, we present an approach for calculations of high-temperature x-ray absorption spectra in arbitrary materials, using a generalization of the real-space Green's function formalism. Here, the method is incorporated as an option in the core-level x-ray spectroscopy code FEFF10. To illustrate the approach, we present calculations for several materials together with comparisons to experiment and with other methods.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Geometry of the charge density wave in the kagome metal A V 3 Sb 5

Kagome lattice is a fertile platform for topological and intertwined electronic excitations. Recently, experimental evidence of an unconventional charge density wave (CDW) is observed in a Z 2 kagome metal AV 3 Sb 5 (A=K, Cs, Rb). This observation triggers wide interest in the interplay between frustrated crystal structure and Fermi surface instabilities. Here, we analyze the lattice effect and its impact on CDW in AV 3 Sb 5 . Based on published experimental data, we show that the 2×2×2 CDW breaks the sixfold rotational symmetry of the crystal due to the phase shift between kagome layers and can explain the twofold symmetric CDW peak intensity observed by scanning tunneling spectroscopy. The coupling between the lattice and electronic degrees of freedom yields a weak first-order structural transition without continuous change of lattice dynamics. Our result emphasizes the fundamental role of lattice geometry in proper understanding of unconventional electronic orders in AV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Nonperturbative study of bulk photovoltaic effect enhanced by an optically induced phase transition

Solid systems with strong correlations and interactions under light illumination have the potential for exhibiting interesting bulk photovoltaic behavior in the non-perturbative regime, which has remained largely unexplored in the past theoretical studies. We investigate the bulk photovoltaic response of a perovskite manganite with strongly coupled electron-spin-lattice dynamics, using real-time simulations performed with a tight-binding model. The transient changes in the band structure and the photoinduced phase transitions, emerging from spin and phonon dynamics, result in a nonlinear current versus intensity behavior beyond the perturbative limit. The current rises sharply across a photoinduced magnetic phase transition, which later saturates at higher light intensities due to excited phonon and spin modes. The predicted peak photoresponsivity is orders of magnitude higher than other known ferroelectric oxides such as BiFeO$_3$. We disentangle phonon-and spin-assisted components to the ballistic photocurrent, showing that they are comparable in magnitude. Our results illustrate a promising alternative way for controlling and optimizing the bulk photovoltaic response through the photoinduced phase transitions in strongly-correlated systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

$O(N)$ ab initio calculation scheme for large-scale moiré structures

Here we present a two-step method specifically tailored for band structure calculation of the small-angle moiré-pattern materials which contain tens of thousands of atoms in a unit cell. In the first step, the self-consistent field calculation for the ground state is performed with the O(N) Krylov subspace method implemented in openmx. Second, the crystal momentum-dependent Bloch Hamiltonian and overlap matrix are constructed from the results obtained in the first step and only a small number of eigenvalues near the Fermi energy are solved with shift-invert and Lanczos techniques. By systematically tuning two key parameters, the cutoff radius for electron hopping interaction and the dimension of the Krylov subspace, we obtained the band structures for both rigid and corrugated twisted bilayer graphene structures down to the first magic angle (θ = 1.08°) with high enough accuracy at affordable costs. The band structures are in good agreement with those from tight-binding models, continuum models, plane-wave pseudopotential based ab initio calculations, and experimental observations. This method is also shown to be efficient in twisted double-bilayer graphene and bilayer WSe 2 . We think this two-step method can play a crucial role in other twisted two-dimensional materials, especially those with much more complex band structure and where the effective model is hard to construct.

36 MATERIALS SCIENCE↗