Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Static analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Thermal Analysis of the Advanced Technology Large Aperture Space Telescope (ATLAST) 8 Meter Primary Mirror

The Advanced Technology Large Aperture Space Telescope (ATLAST) preliminary design concept consists of an 8 meter diameter monolithic primary mirror enclosed in an insulated, optical tube with stray light baffles and a sunshade. ATLAST will be placed in orbit about the Sun-Earth L2 and will experience constant exposure to the sun. The insulation on the optical tube and sunshade serve to cold bias the telescope which helps to minimize thermal gradients. The primary mirror will be maintained at 280K with an active thermal control system. The geometric model of the primary mirror, optical tube, sun baffles, and sunshade was developed using Thermal Desktop(R) SINDA/FLUINT(R) was used for the thermal analysis and the radiation environment was analyzed using RADCAD(R). A XX node model was executed in order to characterize the static performance and thermal stability of the mirror during maneuvers. This is important because long exposure observations, such as extra-solar terrestrial planet finding and characterization, require a very stable observatory wave front. Steady state thermal analyses served to predict mirror temperatures for several different sun angles. Transient analyses were performed in order to predict thermal time constant of the primary mirror for a 20 degree slew or 30 degree roll maneuver. This paper describes the thermal model and provides details of the geometry, thermo-optical properties, and the environment which influences the thermal performance. All assumptions that were used in the analysis are also documented. Parametric analyses are summarized for design parameters including primary mirror coatings and sunshade configuration. Estimates of mirror heater power requirements are reported. The thermal model demonstrates results for the primary mirror heated from the back side and edges using a heater system with multiple independently controlled zones.

Hornsby, Linda↗
NASA NTRS1991

The analysis and large-angle control of a flexible beam using an adaptive truss

This preliminary study of an adaptive truss slewing problem investigates the static positioning of an adaptive truss at slewed orientations and the dynamic vibrations of an attached flexible beam. A nonlinear model of an adaptive truss and flexible beam is derived. Linear control laws are developed and simulated for various truss configurations. Results show the linear control laws developed at a slewed configuration perform best at that configuration.

Warrington, Thomas J.↗
NASA NTRS1997

CARES/Life Software for Designing More Reliable Ceramic Parts

Products made from advanced ceramics show great promise for revolutionizing aerospace and terrestrial propulsion, and power generation. However, ceramic components are difficult to design because brittle materials in general have widely varying strength values. The CAPES/Life software eases this task by providing a tool to optimize the design and manufacture of brittle material components using probabilistic reliability analysis techniques. Probabilistic component design involves predicting the probability of failure for a thermomechanically loaded component from specimen rupture data. Typically, these experiments are performed using many simple geometry flexural or tensile test specimens. A static, dynamic, or cyclic load is applied to each specimen until fracture. Statistical strength and SCG (fatigue) parameters are then determined from these data. Using these parameters and the results obtained from a finite element analysis, the time-dependent reliability for a complex component geometry and loading is then predicted. Appropriate design changes are made until an acceptable probability of failure has been reached.

Nemeth, Noel N.↗
NASA NTRS2004

Finite Element Analysis in Concurrent Processing: Computational Issues

The purpose of this research is to investigate the potential application of new methods for solving large-scale static structural problems on concurrent computers. It is well known that traditional single-processor computational speed will be limited by inherent physical limits. The only path to achieve higher computational speeds lies through concurrent processing. Traditional factorization solution methods for sparse matrices are ill suited for concurrent processing because the null entries get filled, leading to high communication and memory requirements. The research reported herein investigates alternatives to factorization that promise a greater potential to achieve high concurrent computing efficiency. Two methods, and their variants, based on direct energy minimization are studied: a) minimization of the strain energy using the displacement method formulation; b) constrained minimization of the complementary strain energy using the force method formulation. Initial results indicated that in the context of the direct energy minimization the displacement formulation experienced convergence and accuracy difficulties while the force formulation showed promising potential.

Sobieszczanski-Sobieski, Jaroslaw↗
NASA NTRS1972

Analysis and testing of high entrainment single nozzle jet pumps with variable mixing tubes

An analytical model was developed to predict the performance characteristics of axisymmetric single-nozzle jet pumps with variable area mixing tubes. The primary flow may be subsonic or supersonic. The computer program uses integral techniques to calculate the velocity profiles and the wall static pressures that result from the mixing of the supersonic primary jet and the subsonic secondary flow. An experimental program was conducted to measure mixing tube wall static pressure variations, velocity profiles, and temperature profiles in a variable area mixing tube with a supersonic primary jet. Static pressure variations were measured at four different secondary flow rates. These test results were used to evaluate the analytical model. The analytical results compared well to the experimental data. Therefore, the analysis is believed to be ready for use to relate jet pump performance characteristics to mixing tube design.

Hickman, K. E.↗
NASA NTRS1977

Aeroelastic analysis and ground vibration survey of the NASA, Grumman American Yankee modified for spin testing

A complete ground vibration and aeroelastic analysis was made of a modified version of the Grumman American Yankee. The aircraft had been modified for four empennage configurations, a wing boom was added, a spin chute installed and provisions included for large masses in the wing tip to vary the lateral and directional inertia. Other minor changes were made which have much less influence on the flutter and vibrations. Neither static divergence nor aileron reversal was considered since the wing structure was not sufficiently changed to affect its static aeroelastic qualities. The aircraft was found to be free from flutter in all of the normal modes explored in the ground shake test. The analysis demonstrated freedom from flutter up to 214 miles per hour.

Kroeger, R. A.↗
NASA NTRS1984

Delamination growth analysis in quasi-isotropic laminates under loads simulating low-velocity impact

A geometrically nonlinear finite-element analysis was developed to calculate the strain energy released by delamination plates during impact loading. Only the first mode of deformation, which is equivalent to static deflection, was treated. Both the impact loading and delamination in the plate were assumed to be axisymmetric. The strain energy release rate in peeling, G sub I, and shear sliding, G sub II, modes were calculated using the fracture mechanics crack closure technique. Energy release rates for various delamination sizes and locations and for various plate configurations and materials were compared. The analysis indicated that shear sliding (G sub II) was the primary mode of delamination growth. The analysis also indicated that the midplane (maximum transverse shear stress plane) delamination was more critical and would grow before any other delamination of the same size near the midplane region. The delamination growth rate was higher (neutrally stable) for a low toughness (brittle) matrix and slower (stable) for high toughness matrix. The energy release rate in the peeling mode, G sub I, for a near-surface delamination can be as high as 0.5G sub II and can contribute significantly to the delamination growth.

Shivakumar, K. N.↗
NASA NTRS1991

STARS: An integrated general-purpose finite element structural, aeroelastic, and aeroservoelastic analysis computer program

The details of an integrated general-purpose finite element structural analysis computer program which is also capable of solving complex multidisciplinary problems is presented. Thus, the SOLIDS module of the program possesses an extensive finite element library suitable for modeling most practical problems and is capable of solving statics, vibration, buckling, and dynamic response problems of complex structures, including spinning ones. The aerodynamic module, AERO, enables computation of unsteady aerodynamic forces for both subsonic and supersonic flow for subsequent flutter and divergence analysis of the structure. The associated aeroservoelastic analysis module, ASE, effects aero-structural-control stability analysis yielding frequency responses as well as damping characteristics of the structure. The program is written in standard FORTRAN to run on a wide variety of computers. Extensive graphics, preprocessing, and postprocessing routines are also available pertaining to a number of terminals.

Gupta, Kajal K.↗
NASA NTRS2007

Evidence for Interannual to Decadal Variations in Hadley and Walker Circulations and Links to Water and Energy Fluxes

Mass and energy transports associated with the Hadley and Walker circulations are important components of the earth s climate system and are strongly linked to hydrologic processes. Interannual to decadal variation in these flows likely signify a combination of natural climate noise as well as a response to anthropgenic forcing. There remains considerable uncertainty in quantifying variations in these flows. Evidence in the surface pressure record supports a weakening of the Walker circulation over the Pacific in recent decades. Conversely the NCEP / NCAR and ERA 40 reanalyses indicate that the Hadley circulation has increased in strength over the last two decades, though these analyses depict significantly different mass circulation changes. Interestingly, the NCEP - II / DOE reanalysis contains essentially no Hadley circulation changes. Most climate model integrations anticipate a weakening of both tropical circulations associated with stronger static stability. Clearly there is much uncertainty not only with the mass transports, but also how they are linked to water and energy balance of the planet through variations in turbulent heat and radiative fluxes and horizontal exports / imports of energy. Here we examine heat and water budget variations from a number of reanalysis products and focus on the linear and nonlinear response of ENSO warm and cold events as opportunities to study budget variations over the past 15-20 years. Our analysis addresses such questions as To what extent do Hadley and Walker Cell variations compensate each other on mass and energy transport? Do static stability adjustments appear to constrain fractional precipitation response vs. fractional water vapor response? We appeal to constraints offered by GPCP precipitation, SSWI ocean evaporation estimates, and ISCCP-FD radiative fluxes, and other satellite data sets to interpret and confirm reanalysis-based diagnostics. Using our findings we also attempt to place in context the recent findings that tropical ocean evaporation increased by order 5% or more during the 1990s, reconciling this with GPCP precipitation variations.

Robertson, Franklin↗
NASA NTRS1975

Feasibility study of modern airships, phase 1, volume 1

The history of the airship is examined from a technical and operational/mission point of view. The impact on a modern airship design by present technology is defined in some selected, representative areas through a comparison between 1930 and 1975 state-of-the-art. A survey of missions with a potential for the airship was made and some viable applications are established. Several concepts of modern airships were taken through a parametric design analysis in the missions previously established, evolving in a new configuration of a hybrid airship - the Helipsoid -, combining static lift and dynamic lift from tilting propeller/rotors and the planform. Cruise speeds in the 150-200 kt (77-103 m/s) will be possible with this configuration with reasonable engine power. The Helipsoid offers at the same time a realistic and practicable solution to the ballast problem, which is inherent in a vehicle generating its lift (fully or partially) from a medium lighter than air.

Joner, B.↗
NASA NTRS1977

Effect of rotor wake on aerodynamic characteristics of a 1/6 scale model of the rotor systems research aircraft

Tests were conducted in the Langley V/STOL tunnel to determine the effect of the main-rotor wake on the aerodynamic characteristics of the rotor systems research aircraft. A 1/6-scale model with a 4-blade articulated rotor was used to determine the effect of the rotor wake for the compound configuration. Data were obtained over a range of angles of attack, angles of sideslip, auxiliary engine thrusts, rotor collective pitch angles, and rotor tip-path plane angles for several main-rotor advance ratios. Separate results are presented for the forces and moments on the airframe, the wing, and the tail. An analysis of the test data indicates significant changes in the aerodynamic characteristics. The rotor wake increases the longitudinal static stability, the effective dihedral, and the lateral static stability of the airframe. The rotor induces a downwash on the wing. This downwash decreases the wing lift and increases the drag. The asymmetrical rotor wake induces a differential lift across the wing and a subsequent rolling moment. These rotor induced effects on the wing become smaller with increasing forward speed.

Mineck, R. E.↗
NASA NTRS1977

Doubly-curved variable-thickness isoparametric heterogeneous finite element

This paper describes an element streamlined for the analysis of doubly-curved, variable-thickness structural components and illustrates its effective application to vibration and static problems. The element is isoparametric, doubly-curved, thin-shell and triangular with variable thickness and accounts for anisotropic, inhomogeneous elastic material behavior. The element has six nodes (three corner and three mid-side) with five degrees-of-freedom (DOF) per node - three translations and two rotations. Quadratic isoparametric interpolation polynomials are used to express the element geometry and displacement variables in terms of corresponding nodal variables.

Minich, M. D.↗
NASA NTRS1982

An evaluation of vertical drag and ground effect using the RSRA rotor balance system

A flight test program utilizing the Rotor Systems Research Aircraft (RSRA) main rotor balance system was conducted to obtain data for the helicopter configuration. The test program is discussed along with the employed data reduction methods, and the results. NASA 740, the RSRA used for the vertical drag test, was in the standard helicopter configuration. The 31-foot radius blades have a linear twist of eight degrees and NACA 0012 airfoil sections. Aspects of instrumentation are considered, taking into account the data recording system, the static calibration facility, and aspects of data calibration and processing. Attention is given to the test procedure, data analysis methods, balance measurements, the ground effect, and vertical drag. It is found that the RSRA rotor balance system is capable of providing high quality performance data. The vertical drag of the RSRA is 4%, compared to 2.9% predicted.

Flemming, R. J.↗
NASA NTRS1983

Propagation of sound in highly porous open-cell elastic foams

This work presents both theoretical predictions and experimental measurements of attenuation and progressive phase constants of sound in open-cell, highly porous, elastic polyurethane foams. The foams are available commercially in graded pore sizes for which information about the static flow resistance, thermal time constant, volume porosity, dynamic structure factor, and speed of sound is known. The analysis is specialized to highly porous foams which can be efficient sound absorbers at audio frequencies. Negligible effect of internal wave coupling on attenuation and phase shift for the frequency range 16-6000 Hz was predicted and no experimentally significant effects were observed in the bulk samples studied. The agreement between predictions and measurements in bulk materials is excellent. The analysis is applicable to both the regular and compressed elastic open-cell foams.

Lambert, R. F.↗
NASA NTRS1987

High-angle-of-attack pneumatic lag and upwash corrections for a hemispherical flow direction sensor

As part of the NASA F-14 high angle of attack flight test program, a nose mounted hemispherical flow direction sensor was calibrated against a fuselage mounted movable vane flow angle sensor. Significant discrepancies were found to exist in the angle of attack measurements. A two fold approach taken to resolve these discrepancies during subsonic flight is described. First, the sensing integrity of the isolated hemispherical sensor is established by wind tunnel data extending to an angle of attack of 60 deg. Second, two probable causes for the discrepancies, pneumatic lag and upwash, are examined. Methods of identifying and compensating for lag and upwash are presented. The wind tunnel data verify that the isolated hemispherical sensor is sufficiently accurate for static conditions with angles of attack up to 60 deg and angles of sideslip up to 30 deg. Analysis of flight data for two high angle of attack maneuvers establishes that pneumatic lag and upwash are highly correlated with the discrepancies between the hemispherical and vane type sensor measurements.

Whitmore, Stephen A.↗
NASA NTRS1991

Structural dynamic and aeroelastic considerations for hypersonic vehicles

Structural dynamic and aeroelastic considerations applicable to hypersonic vehicles are discussed. Emphasis is given to aerospace plane configurations. The definition of aerothermoelasticity and the operational flight environment are reviewed, and structural dynamic and aeroelastic areas of concern are individually discussed, including vibration, landing and taxiing, propellant dynamics, acoustics, lifting surface flutter, panel flutter, control surface buzz, buffeting, gust response, and static aeroelasticity. Recent research results from all-moveable delta-wing aerolastic studies, engine inlet lip aeroelastic analysis, and studies of thermal effects on vibration frequencies, aerodynamic heating effects on flutter, and active control of aeroelastic response are reviewed.

Cazier, F. W., Jr.↗
NASA NTRS1992

Fatigue damage in cross-ply titanium metal matrix composites containing center holes

The development of fatigue damage in (0/90) sub SCS-6/TI-15-3 laminates containing center holes was studied. Stress levels required for crack initiation in the matrix were predicted using an effective strain parameter and compared to experimental results. Damage progression was monitored at various stages of fatigue loading. In general, a saturated state of damage consisting of matrix cracks and fiber matrix debonding was obtained which reduced the composite modulus. Matrix cracks were bridged by the 0 deg fibers. The fatigue limit (stress causing catastrophic fracture of the laminates) was also determined. The static and post fatigue residual strengths were accurately predicted using a three dimensional elastic-plastic finite element analysis. The matrix damage that occurred during fatigue loading significantly reduced the notched strength.

Bakuckas, J. G., Jr.↗
NASA NTRS1992

Dynamic test/analysis correlation using reduced analytical models

Test/analysis correlation is an important aspect of the verification of analysis models which are used to predict on-orbit response characteristics of large space structures. This paper presents results of a study using reduced analysis models for performing dynamic test/analysis correlation. The reduced test-analysis model (TAM) has the same number and orientation of DOF as the test measurements. Two reduction methods, static (Guyan) reduction and the Improved Reduced System reduction, are applied to the test/analysis correlation of a laboratory truss structure. Simulated test results and modal test data are used to examine the performance of each method. It is shown that selection of DOF to be retained in the TAM is critical when large structural masses are involved. In addition, the use of modal test results may provide difficulties in TAM accuracy even if a large number of DOF are retained in the TAM.

Mcgowan, Paul E.↗