Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

AERO-MAP: a data compilation and modeling approach to understand spatial variability in fine- and coarse-mode aerosol composition

Abstract. Aerosol particles are an important part of the Earth climate system, and their concentrations are spatially and temporally heterogeneous, as well as being variable in size and composition. Particles can interact with incoming solar radiation and outgoing longwave radiation, change cloud properties, affect photochemistry, impact surface air quality, change the albedo of snow and ice, and modulate carbon dioxide uptake by the land and ocean. High particulate matter concentrations at the surface represent an important public health hazard. There are substantial data sets describing aerosol particles in the literature or in public health databases, but they have not been compiled for easy use by the climate and air quality modeling community. Here, we present a new compilation of PM2.5 and PM10 surface observations, including measurements of aerosol composition, focusing on the spatial variability across different observational stations. Climate modelers are constantly looking for multiple independent lines of evidence to verify their models, and in situ surface concentration measurements, taken at the level of human settlement, present a valuable source of information about aerosols and their human impacts complementarily to the column averages or integrals often retrieved from satellites. We demonstrate a method for comparing the data sets to outputs from global climate models that are the basis for projections of future climate and large-scale aerosol transport patterns that influence local air quality. Annual trends and seasonal cycles are discussed briefly and are included in the compilation. Overall, most of the planet or even the land fraction does not have sufficient observations of surface concentrations – and, especially, particle composition – to characterize and understand the current distribution of particles. Climate models without ammonium nitrate aerosols omit ∼ 10 % of the globally averaged surface concentration of aerosol particles in both PM2.5 and PM10 size fractions, with up to 50 % of the surface concentrations not being included in some regions. In these regions, climate model aerosol forcing projections are likely to be incorrect as they do not include important trends in short-lived climate forcers.

Mahowald, Natalie M. (ORCID:000000022873997X)↗

Soil thickness map at two hillslopes near the pumphouse in the east river watershed, Colorado

The soil thickness maps were created by using a hybrid model-data approach. Field sampling and remote sensing data of the spatial distribution of two hillslopes in the Pump House area in the East River Watershed in the CO., the U.S. The data package includes the geospatial data of the soil thickness maps at two hillslopes near the pumphouse, and the associated remote sensing data, including lidar DEM and a shape file of the boundary of the study area. The data can be viewed in GIS software such as QGIS or ArcGIS desktop. The geospatial data can also be viewed in Python or Matlab. The data were generated for the purpose of modeling surface hydrology and near-surface chemistry. This work shows how to combine sampling data and a process-based model to predict one of the highest uncertainty in the land surface process, the soil thickness.

2D Geospatial Maps↗

Chandra Interactive Analysis of Observations (CIAO)

The Chandra (formerly AXAF) telescope, launched on July 23, 1999, provides X-rays data with unprecedented spatial and spectral resolution. As part of the Chandra scientific support, the Chandra X-ray Observatory Center provides a new data analysis system, CIAO ("Chandra Interactive Analysis of Observations"). We will present the main components of the system: "First Look" analysis; SHERPA: a multi-dimensional, multi-mission modeling and fitting application; Chandra Imaging and Plotting System; Detect package-source detection algorithms; and DM package generic data manipulation tools, We will set up a demonstration of the portable version of the system and show examples of Chandra Data Analysis.

Dobrzycki, Adam↗

Synthetic Data Generation for 3D Mesh Prediction and Spatial Reasoning During Multi-Agent Robotic Missions

In-space assembly operations require accurate reasoning over the pose, location, and structural organization of both the autonomous agents and assembly materials. In a full six-degree-of-freedom space, an accurate understanding of the full three-dimensional structure of the object of interest greatly enriches information for pose estimation and collision planning. Current methods of predicting pose estimation require a priori understanding of the shape of the object. Additionally, visual information in the space environment is impacted by variations in contrast and illumination. Using synthetic data allows us to rapidly generate large datasets with in varying environments and lighting conditions.This work details the generation of synthetic data used to explore the use of a region-based convolutional neural networks to detect objects of interest and predict a voxel-based three-dimensional mesh in order to understand their full three-dimensional shape. This mesh provides useful spatial information during in-space assembly operations without requiring either the complexity of maintaining models over the progress of building an object or observations from multiple angles. The generated meshes are then compared to that of ground truth in order to measure its performance.

synthetic data↗

Modeling and Analysis of Solar Radiation Potentials on Building Rooftops

The active application of photovoltaic for electricity generation could effectively transform neighborhoods and commercial districts into small, localized power plants. This application, however, relies heavily on an accurate estimation of the amount of solar radiation that is available on individual building rooftops. While many solar energy maps exist at higher spatial resolution for concentrated solar energy applications, the data from these maps are not suitable for roof-mounted photovoltaic for several reasons, including lack of data at the appropriate spatial resolution and lack of integration of building-specific characteristics into the models used to generate the maps. To address this problem, we have developed a modeling framework for estimating solar radiation potentials on individual building rooftops that is suitable for utility-scale applications as well as building-specific applications. The framework uses light detection and ranging (LIDAR) data at approximately 1-meter horizontal resolution and 0.3-meter vertical resolution as input for modeling a large number of buildings quickly. One of the strengths of this framework is the ability to parallelize its implementation. Furthermore, the framework accounts for building specific characteristics, such as roof slope, roof aspect, and shadowing effects, that are critical to roof-mounted photovoltaic systems. The resulting data has helped us to identify the so-called solar panel sweet spots on individual building rooftops and obtain accurate statistics of the variation in solar radiation as a function of time of year and geographical location.

computational modeling↗

UQ and V&V techniques applied to experiments and simulations of heated pipes pressurized to failure

This report demonstrates versatile and practical model validation and uncertainty quantification techniques applied to the accuracy assessment of a computational model of heated steel pipes pressurized to failure. The Real Space validation methodology segregates aleatory and epistemic uncertainties to form straightforward model validation metrics especially suited for assessing models to be used in the analysis of performance and safety margins. The methodology handles difficulties associated with representing and propagating interval and/or probabilistic uncertainties from multiple correlated and uncorrelated sources in the experiments and simulations including: material variability characterized by non-parametric random functions (discrete temperature dependent stress-strain curves); very limited (sparse) experimental data at the coupon testing level for material characterization and at the pipe-test validation level; boundary condition reconstruction uncertainties from spatially sparse sensor data; normalization of pipe experimental responses for measured input-condition differences among tests and for random and systematic uncertainties in measurement/processing/inference of experimental inputs and outputs; numerical solution uncertainty from model discretization and solver effects.

97 MATHEMATICS AND COMPUTING↗

Aerosol Optical Properties Derived from the DRAGON-NE Asia Campaign, and Implications for a Single-Channel Algorithm to Retrieve Aerosol Optical Depth in Spring from Meteorological Imager (MI) On-Board the Communication, Ocean, and Meteorological Satellite (COMS)

An aerosol model optimized for northeast Asia is updated with the inversion data from the Distributed Regional Aerosol Gridded Observation Networks (DRAGON)-northeast (NE) Asia campaign which was conducted during spring from March to May 2012. This updated aerosol model was then applied to a single visible channel algorithm to retrieve aerosol optical depth (AOD) from a Meteorological Imager (MI) on-board the geostationary meteorological satellite, Communication, Ocean, and Meteorological Satellite (COMS). This model plays an important role in retrieving accurate AOD from a single visible channel measurement. For the single-channel retrieval, sensitivity tests showed that perturbations by 4 % (0.926 +/- 0.04) in the assumed single scattering albedo (SSA) can result in the retrieval error in AOD by over 20 %. Since the measured reflectance at the top of the atmosphere depends on both AOD and SSA, the overestimation of assumed SSA in the aerosol model leads to an underestimation of AOD. Based on the AErosol RObotic NETwork (AERONET) inversion data sets obtained over East Asia before 2011, seasonally analyzed aerosol optical properties (AOPs) were categorized by SSAs at 675 nm of 0.92 +/- 0.035 for spring (March, April, and May). After the DRAGON-NE Asia campaign in 2012, the SSA during spring showed a slight increase to 0.93 +/- 0.035. In terms of the volume size distribution, the mode radius of coarse particles was increased from 2.08 +/- 0.40 to 2.14 +/- 0.40. While the original aerosol model consists of volume size distribution and refractive indices obtained before 2011, the new model is constructed by using a total data set after the DRAGON-NE Asia campaign. The large volume of data in high spatial resolution from this intensive campaign can be used to improve the representative aerosol model for East Asia. Accordingly, the new AOD data sets retrieved from a single-channel algorithm, which uses a precalculated look-up table (LUT) with the new aerosol model, show an improved correlation with the measured AOD during the DRAGON-NE Asia campaign. The correlation between the new AOD and AERONET value shows a regression slope of 1.00, while the comparison of the original AOD data retrieved using the original aerosol model shows a slope of 1.08. The change of y-offset is not significant, and the correlation coefficients for the comparisons of the original and new AOD are 0.87 and 0.85, respectively. The tendency of the original aerosol model to overestimate the retrieved AOD is significantly improved by using the SSA values in addition to size distribution and refractive index obtained using the new model.

Kim, M.↗

Airborne Single Particle Mass Spectrometers (SPLAT II & miniSPLAT) and New Software for Data Visualization and Analysis in a Geo-Spatial Context

Understanding the effect of aerosols on climate requires knowledge of the size and chemical composition of individual aerosol particles - two fundamental properties that determine an aerosol’s optical properties and ability to serve as cloud condensation or ice nuclei. Here we present miniSPLAT, our new aircraft compatible single particle mass spectrometer, that measures in-situ and in real-time size and chemical composition of individual aerosol particles with extremely high sensitivity, temporal resolution, and sizing precision on the order of a monolayer. miniSPLAT operates in dual data acquisition mode to measure, in addition to single particle size and composition, particle number concentrations, size distributions, density, and asphericity with high temporal resolution. When compared to our previous instrument, SPLAT II, miniSPLAT has been significantly reduced in size, weight, and power consumption without loss in performance. We also present ND-Scope, our newly developed interactive visual analytics software package. ND-Scope is designed to explore and visualize the vast amount of complex, multidimensional data acquired by our single particle mass spectrometers, along with other aerosol and cloud characterization instruments on-board aircraft. We demonstrate that ND-Scope makes it possible to visualize the relationships between different observables and to view the data in a geo-spatial context, using the interactive and fully coupled Google Earth and Parallel Coordinates displays. Here we illustrate the utility of ND-Scope to visualize the spatial distribution of atmospheric particles of different compositions, and explore the relationship between individual particle composition and their activity as cloud condensation nuclei.

54 ENVIRONMENTAL SCIENCES↗

Ultraviolet spectra of HH 1 and HH 2 - Spatial variations and the continuum problem

High-SNR 12-hr and 14-hr ultraviolet spectra of HH 1 and HH2 in the IUE short-wavelength range are reported. HH 1 data show a (spatial) half-width of the image size in the C IV 1548-A, 1551-A line which is smaller than the spatial half-width for the semiforbidden C II 1907-A, 1909-A line. A qualitatively similar situation is shown for HH 2, although differences in the image sizes are smaller than for HH 1. The continua of HH 1 and HH2 are found to have a relatively similar wavelength dependence, even in rather small features, and to both have their maxima between 1570 and 1580 A. It is noted that the observed wavelength of the continuum maximum agrees with the position of the maximum of the H2 fluorescence spectrum.

Boehm, K. H.↗

Synthetic Data Generation for 3D Mesh Prediction and Spatial Reasoning During Multi-Agent Robotic Missions

In-space assembly operations require accurate reasoning over the pose, location, and structural organization of both the autonomous agents and assembly materials. In a full six-degree-of-freedom space, an accurate understanding of the full three-dimensional structure of the object of interest greatly enriches information for pose estimation and collision planning. Current methods of predicting pose estimation require a priori understanding of the shape of the object. Additionally, visual information in the space environment is impacted by variations in contrast and illumination. Using synthetic data allows us to rapidly generate large datasets with in varying environments and lighting conditions. This work details the generation of synthetic data used to explore the use of a region-based convolutional neural networks to detect objects of interest and predict a voxel-based three-dimensional mesh in order to understand their full three-dimensional shape. This mesh provides useful spatial information during in-space assembly operations without requiring either the complexity of maintaining models over the progress of building an object or observations from multiple angles. The generated meshes are then compared to that of ground truth in order to measure its performance.

James Ecker↗

Prestack Waveform Inversion at GC 955: Trials and sensitivity of PWI to high-resolution seismic data (Data Report)

Understanding the spatial extent and variability of hydrate deposits has important implications for potential economic production, climate change, and assessing natural hazards risks. Seismic reflection techniques are capable of determining the extent of gas hydrate deposits and can shed light on hydrate concentrations and properties. Using high resolution prestack time migrated seismic data collected during a 2013 US Geological Survey expedition and prestack waveform inversion (PWI) techniques, we produce highly resolved velocity models and compare them to co-located well logs. Coupling our PWI results with velocity-porosity relationships and nearby well control, we compare hydrate properties at site 955 in the Green Canyon and site 313 at Walker Ridge.

03 NATURAL GAS↗

Derivation and assessment of regional electricity generation emission factors in the USA

Electricity production is one of the largest sources of environmental emissions - especially greenhouse gases (GHGs) - in the USA. Emission factors (EFs) vary from region to region, which requires the use of spatially relevant EF data for electricity production while performing life cycle assessments (LCAs). Uncertainty information, which is sought by LCA practitioners, is rarely supplied with available life cycle inventories (LCIs). To address these challenges, we present a method for collecting data from different sources for electricity generation and environmental emissions; discuss the challenges involved in agglomerating such data; provide relevant suggestions and solutions to merge the information; and calculate EFs for electricity generation processes from various fuel sources for different spatial regions and spatial resolutions. The EFs from the US 2016 Electricity Life Cycle Inventory (eLCI) are analyzed and explored in this study. We also explore the method of uncertainty information derivation for the EFs. We explore the EFs from different technologies across Emissions & Generation Resource Integrated Database (eGRID) regions in the USA. We find that for certain eGRID regions, the same electricity production technology may have worse emissions. This may be a result of the age of the plants in the region, the quality of fuel used, or other underlying factors. Region-wise life cycle impact assessment (LCIA) ISO 14040 impacts for total generation mix activities provide an overview of the total sustainability profile of electricity production in a particular region, rather than only global warming potential (GWP). We also find that, for different LCIA impacts, several eGRID regions are consistently worse than the US average LCIA impact for every unit of electricity generated. Here this work describes the development of an electricity production LCI at different spatial resolutions by combining and harmonizing information from several databases. The inventory consists of emissions, fuel inputs, and electricity and steam outputs from different electricity production technologies located across various regions of the USA. This LCI for electricity production in the USA will prove to be an enormous resource for all LCA researchers - considering the detailed sources of the information and the breadth of emissions covered by it.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Snow cover monitoring by machine processing of multitemporal LANDSAT MSS data

LANDSAT frames were geometrically corrected and data sets from six different dates were overlaid to produce a 24 channel (six dates and four wavelength bands) data tape. Changes in the extent of the snowpack could be accurately and easily determined using a change detection technique on data which had previously been classified by the LARSYS software system. A second phase of the analysis involved determination of the relationship between spatial resolution or data sampling frequency and accuracy of measuring the area of the snowpack.

Luther, S. G.↗

A model for the spatial and energy distributions of energetic neutral atoms produced within the Saturn/Titan plasma system

A model for the production of energetic neutral atoms (ENAs) in the Saturn/Titan system, that takes into account existing data on the spatial distribution of the background neutral density, the energy and spatial distributions of the energetic ions, and the energy dependence of the charge-exchange cross sections, is presented. Hydrogen production via H(+), H is presented in detail. The extended Saturn/Titan system is 'imaged' in energetic neutral H at 66 R(s) and 25-deg latitude. From this vantage point, the energetic H flux is 6 + or - 1 H/sq cm per sec between 10 and 100 keV. Comparing the predicted H spectrum with that observed by Kirsch et al. (1981), the production of neutral O is estimated, and it is concluded that O(+), H charge exchange in the inner magnetosphere is sufficient to account for all the ENA O production.

Hsieh, K. C.↗

Validation of SO2 Retrievals from the Ozone Monitoring Instrument over NE China

The Dutch-Finnish Ozone Monitoring Instrument (OMI) launched on the NASA Aura satellite in July 2004 offers unprecedented spatial resolution, coupled with contiguous daily global coverage, for space-based UV measurements of sulfur dioxide (SO2). We present a first validation of the OMI SO2 data with in situ aircraft measurements in NE China in April 2005. The study demonstrates that OMI can distinguish between background SO2 conditions and heavy pollution on a daily basis. The noise (expressed as the standard deviation,sigma) is approximately 1.5 DU (Dobson units; 1 DU = 2.69 10 (exp 16) molecules/cm (exp 2)) for instantaneous field of view boundary layer (PBL) SO2 data. Temporal and spatial averaging can reduce the noise to sigma approximetly 0.3 DU over a remote region of the South Pacific; the long-term average over this remote location was within 0.1 DU of zero. Under polluted conditions collection 2 OMI data are higher than aircraft measurements by a factor of two. Improved calibrations of the radiance and irradiance data (collection 3) result in better agreement with aircraft measurements on polluted days. The air mass corrected collection 3 data still show positive bias and sensitivity to UV absorbing aerosols. The difference between the in situ data and the OMI SO2 measurements within 30 km of the aircraft profiles was about 1 DU, equivalent to approximately 5 ppb from 0 to 3000 m altitude. Quantifying the SO2 and aerosol profiles and spectral dependence of aerosol absorption between 310 and 330 nm are critical for an accurate estimate of SO2 from satellite UV measurements.

Krotkov, Nickolay A.↗

Spatial and Temporal Characterization of Activity in Public Space, 2019–2020

The data reported here characterize spatial and temporal variation in the ratio of short-to-long-duration visits in public places (i.e., points of interest) in the United States for each week between January 2019 and December 2020. The underlying data on anonymized and aggregated foot traffic to public places is curated by SafeGraph, a geospatial data provider. In this work, we report the estimated number and duration of “short” (i.e., <4 hours) and “long” (i.e., >4 hours) visits to public places at the US census block group level. Long visits are shown to be a good proxy for workers based on formal economic data. We propose that short visits are more likely to represent nonobligate activities: people visiting a public place for leisure, shopping, entertainment, or civic or cultural engagement. Our work constructs a ratio of short to long visits, which can be used to inform population estimates for nonworker use of public space. These data may be useful for understanding how people’s use of public space has changed during the COVID-19 pandemic and, more generally, for understanding activity patterns in public.

99 GENERAL AND MISCELLANEOUS↗

Temporal and Spatial Comparison of Gridded TMY, TDY, and TGY Data Sets

Typical Meteorological Year (TMY) data sets provide industry standard resource information for building designers and are commonly used by the solar industry to estimate photovoltaic and concentrating solar power system performance. Historically, TMY data sets were only available for certain station locations, but current TMY data sets are available on the same grid as the National Solar Radiation Database data and are referred to as the gridded TMY. In this report, a comparison of TMY, typical direct (normal irradiance) year (TDY), and typical global (horizontal irradiance) year (TGY) data sets were performed to better understand the impact of ancillary weather variables upon them. These analyses identified geographical areas of high and low temporal and spatial variability, thereby providing insight into the representativeness of a particular TMY data set for use in renewable energy as well as other applications.

14 SOLAR ENERGY↗

End-of-Winter Snow Depth, Temperature, Density, and SWE Measurements at Teller Road Site, Seward Peninsula, Alaska, 2023

Measurements of end-of-winter snow properties were collected at the NGEE Arctic Teller Road Site at mile marker 27 (TL_MM27) from March 31 to April 3, 2023. This dataset contains one *.pdf user guide and four *.csv data files of spatially distributed values of snow depth, snow water equivalent (SWE), snow temperature, and snow density. Snow temperature and snow density were collected throughout the snowpack at different depths. Data were collected toward the end of the winter season from late March to early April, when the snowpack is typically near its maximum. A Snow-Hydro MagnaProbe (http://www.snowhydro.com/products/column2.html) was used to improve collection efficiency and enhance spatial coverage. This dataset is a continuation of the previous end-of-winter snow surveys conducted at the Teller Road Site in 2016-2018 (Wilson et al., 2020; https://doi.org/10.5440/1592103), 2019 (Bennett et al., 2021; https://doi.org/10.5440/1798170), and 2022 (Bennett et al., 2022; https://doi.org/10.5440/1887250).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic) was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗