Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Lignin Removal in Subcellular Location of Poplar Cell Wall During Pretreatment Significantly Impacts Cellulose Digestibility

The γ-valerolactone (GVL) pretreatment is one of the leading solvent-based methods for producing high-quality lignin under mild conditions. However, the glucan conversion yield from GVL pretreated biomass remains unsatisfactory. To explore the discrepancies between the relatively low glucan conversion and high lignin extraction, we conducted GVL−HCl and NaOH pretreatments on poplar and investigated their effects on lignin content and location, as well as on enzymatic hydrolysis of poplar cell walls at the subcellular level. Under designated pretreatment conditions of GVL−HCl (90% GVL, 0.1 M HCl, 100 °C, 1 h) and NaOH (1 M, 121 °C, 2 h), the glucan conversion yields were 69.4% and 95.8%, with lignin removal rates of 67.8% and 47.7%, respectively. Four types of GFP-labeled carbohydrate binding modules were used to identify different forms of cellulose in the pretreated cell walls. The overall binding intensities to pretreated poplar were stronger for NaOH compared to GVL−HCl pretreatment. Stimulated Raman scattering microscopy imaging revealed that GVL−HCl preferentially extracted lignin from the compound middle lamella and cell corner areas, while NaOH effectively dissolved lignin in the secondary cell walls. Real-time imaging of cellulase degradation of pretreated cell walls further indicated that digestion started from both the cell lumen and the compound middle lamella areas for GVL, whereas it occurred uniformly across the secondary cell walls for NaOH. Our findings suggest that the location of lignin removal during pretreatment is crucial for enzymatic cellulose degradation, in addition to the total amount of lignin extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Abatement of radioiodine in aqueous reprocessing off-gas

The reprocessing used nuclear fuel (UNF) releases volatile fission and activation products, including 129 I, into the off-gas of a processing plant. Mitigation of the release of vapor phase radionuclides is necessary for meeting regulatory requirements in the United States and other countries. In an aqueous reprocessing plant, volatile radioiodine could be present in several forms, depending on the chemistry of the process used. Inorganic iodine will be the predominate species in any shearing or voloxidation pretreatment off-gas and dissolver off-gas (DOG). Organic iodides such as CH 3 I, C 4 H 9 I, and C 12 H 25 I have been proposed to be generated during solvent extraction; thus, these species must be captured from the vessel off-gas (VOG). The abatement of inorganic and organic iodide species to meet United States regulatory requirements has been demonstrated in laboratory experiments using Ag-based solid sorbents. The data presented in this paper includes the effect of gas composition (e.g., the presence of water vapor and NO x ), iodine speciation (I 2 , CH 3 I, C 4 H 9 I, C 12 H 25 I), and sorbent bed parameters (e.g., temperature, sorbent age) on complete iodine capture on Ag-mordenite in an aqueous reprocessing plant.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

2.3.4.104 - Lignin Conversion to Sustainable Aviation Fuel Blendstocks

The Lignin Conversion to Sustainable Aviation Fuel Blendstocks (LigSAF) project focuses on the conversion of lignin-rich streams to deoxygenated aromatic and cycloalkane blendstocks in the jet fuel range. This work is done in close collaboration with the BETO-funded Lignin-First Biorefinery Development project and industrial scale-up partners, and the work is closely guided by analysis to develop cost-effective and sustainable routes to produce lignin-based SAF blendstocks. To date, we have demonstrated the continuous catalytic conversion of a lignin oil from poplar to deoxygenated aromatic products at -85% C-mol yield. This hydrodeoxygenation process uses a stable, earth-abundant catalyst and requires no solvent. We have also established a baseline process model and associated techno-economic analysis and life cycle assessment that together demonstrate the potential to achieve cost parity with fossil carbon-based jet fuel at -70% reduction in greenhouse gas emissions. Current work is focused on expanding the slate of feedstocks for hydrodeoxygenation to include lignin oils from softwoods, agricultural residues, and grasses as well as from hydrolysis lignin substrates from biochemical conversion and pulp-and-paper processes. We are also undertaking catalyst development efforts to tune the reaction selectivity from aromatic compounds to cycloalkanes. Lastly, we are investigating reaction engineering strategies to slurry solids for hydrodeoxygenation reactions.

aromatics↗
DOE OSTI2021

Analysis of liquid petroleum using a laser-induced breakdown spectroscopy instrument

Here, a prototype analyzer for the direct LIBS analysis of nebulized liquid samples was developed and tested, particularly for the analysis of petroleum, organic solvents and aqueous solutions. The LIBS analyzer requires about 750 µl of liquid sample, 1 liter of N 2 gas, and 10 s of the analysis time to record 100 spectra. The limits of detection in oil and solvent are as low as 0.01–0.04 ppm for Li, Mg, and Cu. They increase for the difficult elements, such as Pb and Hg (7-10 ppm), Cl (250 ppm), and S (~0.7%). The relative standard deviation of measuring 100 ppm vanadium in oil and solvent was 1.5%. The LIBS detection limits and repeatability are better than required by the standard method ASTM D5185 for the analysis of lubricating oils in ICP-OES. Several petroleum samples were analyzed by LIBS and the quantitative results for V, Ni, and Fe compared to the ICP-OES data. Light crude oils can be nebulized and analyzed directly. Medium crude oils require minimal dilution at least 1:1, otherwise errors of determination become large. Presumably, utilization of the internal standard and chemometrics can be useful to correct for the matrix effects. In addition to the trace element analysis, the LIBS prototype demonstrated ability to measure the hydrogen-to-carbon ratio in organic liquid samples. Several unidentified features were observed in the carbon spectrum. Their possible origin is discussed.

02 PETROLEUM↗
DOE OSTI2025

Decoding the Effect of Anion Identity on the Solubility of N -(2-(2-Methoxyethoxy)ethyl)phenothiazine (MEEPT)

Variations in the solubility of redox-active organic molecules (ROM) of interest for nonaqueous redox flow batteries (RFB), especially as the ROM state-of-charge changes during charge-discharge cycling, present significant molecular design challenges. The situation is further complicated as ROM solubility can be regulated by the choice of electrolyte salt and solvent that together with the ROM comprise the catholyte or anolyte (redox electrolyte) formulation, presenting materials design challenges. The ROM N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT) is a viscous liquid at room temperature and is miscible in several organic solvents, including acetonitrile and propylene carbonate. The MEEPT radical cation (MEEPT +· ) paired with tetrafluoroborate (BF 4 - ) in acetonitrile presents a 0.5 M solubility, a dramatic decrease when compared to the viscous liquid of neutral MEEPT. Here, in this study, we present a joint experimental, regression modeling, and molecular dynamics (MD) simulations investigation to explore MEEPT-X (where X represents the counteranion) salt solubility variability as a function of concentration and counteranion chemistry in acetonitrile. We find a strong dependence of the salt solubility on the counteranion and relate these findings to explicit intermolecular interactions between MEEPT +· and the counteranion in the electrolyte solution.

Perera, Anton S. [Univ. of Kentucky, Lexington, KY↗
DOE OSTI2021

Designing polymer coatings for lithium metal protection

Abstract Protection of lithium metal has been one of the great challenges to realize a long-life, high-energy-density battery. Polymer coatings on lithium metal surface have been proven to be an effective protection method in terms of improved morphology, higher coulombic efficiency, and a longer cycle life. However, there is a variety of design principles of polymer coatings proposed by the research community, and the influence of polymer swelling in liquid electrolytes remains poorly understood. Herein we use crosslinking density and solvent–polymer interaction to quantitatively explain the mechanical property and the ion-transport property of polymer coatings when swollen in liquid electrolytes. Low crosslinking density is beneficial for reducing the rigidity and enhancing the viscosity of the polymer. Ion conductivity increases with the swelling ratio, and activation energy of lithium-ion transport increases in a polar polymer with strong ion–polymer coupling. We propose that polymer coatings must be combined with the emerging electrolytes with unconventional solvent compositions to realize a practical high-performance lithium metal battery. This study can provide design guidelines for polymer coatings through the optimized interactions with upcoming high-performance electrolytes.

Materials Science↗
DOE OSTI2023

Modeling the Environment-Dependent Kinetics of Oxygen Reduction Reaction – a Continuum Model for Electric Double Layer

Here, for proton-exchange-membrane fuel cells (PEMFCs) to achieve broad commercialization, improved energy-conversion efficiency with minimal Pt-based electrocatalyst is required. Because the sluggish rate of oxygen reduction reaction (ORR) limits the efficiency of PEMFCs, the efficiency improvement requires a better understanding of ORR kinetics and mechanism to design better catalyst. To understand the ORR mechanism, theoretical and experimental analyses have been conducted. While previous studies reasonably explained the catalyst-dependent activity on single crystal catalysts in 0.1 M perchloric acid solution, the explicit effect of electrolyte and related microenvironments is not thoroughly understood. The change in the electrolyte alters the electric-double-layer (EDL) structure and thus the local microenvironment at the electrode/electrolyte interface. Thus, the structure of the EDL should be carefully analyzed to uncover the electrolyte-dependent reaction kinetics. In this talk, we propose a multiscale continuum model to predict the EDL structure and examine the effect of perchloric acid concentration on ORR activity on Pt (111). The model includes Density Potential Functional Theory (DPFT) for electron density and Modified Poisson Boltzmann equation for species’ density and electric potential. Also, the interaction between adsorbents and electric field is taken into account by minimizing the grand potential. After model validation with experimentally measured double-layer capacity data as a function of applied potential and concentration, the effect of the perchloric acid concentration (0.02 M – 0.2 M) on ORR activity is analyzed and discussed. It is shown that the model reproduces the specific activity obtained in the experiments when assuming the oxygen adsorption is limiting the rate, which can be attributed to the large energetic barrier for solvent reorganization. Then, extension of the model to PEMFC ionomer electrolytes will be introduced. Overall, the model framework and findings provide insights into the ORR mechanism and guidance on how to tailor catalyst materials for increased PEMFC performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Gamma Radiolysis of Biphasic Acetohydroxamic Acid (AHA) Solvent Systems

Acetohydroxamic acid (AHA) has been proposed as a substitute for uranium(IV) and hydrazine as a plutonium complexant and neptunium reductant for simplified, single-cycle used nuclear fuel reprocessing flowsheets. However, the chemical behavior of AHA in an intense multi-component radiation field is poorly understood, especially under representative biphasic reprocessing solvent system conditions. In response to this critical knowledge gap, this study has investigated the gamma radiolytic integrity of AHA in aqueous nitric solutions in contact with an organic phase, comprising current and future reprocessing ligands (TBP, DEHBA, and DEHiBA) dissolved in n-dodecane diluent. Our data show negligible effect of the organic phase on the radiolytic behavior of AHA compared to complementary single-phase experiments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Radiolytic evaluation of acetohydroxamic acid (AHA) under biphasic (n-dodecane and TBP/DEHBA/DEHiBA) used nuclear fuel reprocessing conditions

Acetohydroxamic acid (AHA) has been proposed as a substitute for uranium(IV) and hydrazine as a plutonium complexant and neptunium reductant for simplified, single-cycle used nuclear fuel reprocessing flowsheets. However, the chemical behavior of AHA in an intense multi-component radiation field is poorly understood, especially under representative biphasic reprocessing solvent system conditions. In response to this critical knowledge gap, this study has investigated the gamma radiolytic integrity of AHA in aqueous nitric solutions in contact with an organic phase, comprising current and future reprocessing ligands (TBP, DEHBA, and DEHiBA) dissolved in n-dodecane diluent. Our data show negligible effect of the organic phase on the radiolytic behavior of AHA compared to complementary single-phase experiments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Investigation of porous polydimethylsiloxane structures with tunable properties induced by the phase separation technique

This article reports the fabrication and characterization of porous polydimethylsiloxane (PDMS) structures developed by the solvent evaporationinduced phase separation technique. Here, ternary systems containing water/ tetrahydrofuran (THF)/PDMS with various concentrations are produced to form a stable solution. The porous PDMS structures are formed by removing the solvent (THF) and nonsolvent (water) phases during the stepping heat treatment procedure. The analytical ternary phase diagram is constructed based on the thermodynamic equilibrium state in the polymer solution to explain the stable/unstable formulations and the possible composition change path. The results show that the isolated pores with the adjustable pore size ranging from 330 to 1900 μm are obtained by tuning the water to the THF ratio. The mechanical properties of the porous PDMS structures are determined by conducting the tensile tests on the prepared dog bone-shaped specimens. A wide range of elastic modulus ranging between 0.49 and 1.05 MPa was achieved without affecting the density of the porous sample by adjusting the solvent and non-solvent content in the solution. It is shown that the flexibility of the porous structures can be improved by reducing the ratio of water to THF and decreasing the PDMS content. The porosity measurements reveal that the PDMS concentration is the major phase controlling the porosity of the structure, while the effect of water/THF is negligible.

42 ENGINEERING↗
DOE OSTI2025

A comprehensive review on valorization of chestnut processing wastes into bio‐based composites and bioplastics

Abstract This review examines the characterization and utilization of chestnut processing wastes (35%) in the production of bioplastics and biocomposites. In this review, a Web of Science search without any publishing year restriction on the biochemical compositions of all the components of Castanea sativa . The obtaining of bioplastics and biocomposites based on C. sativa was reviewed. First, it highlights the biochemical composition and antioxidant properties of chestnut fruit, shell, burrs, leaves, flowers, and wood focusing on the most important compounds, such as phenolic acids, flavonoids, carbohydrates, Klason lignin, cellulose, and glucan, which can enhance the properties of these materials. Then the review covers using several chestnut extracts and fillers in bioplastics production through solvent casting technique. The mechanical, structural, bioactive properties, and moisture content were optimized through the composition and production. The color, UV absorption, antioxidant, and antimicrobial activity were also discussed. Biocomposites reinforced with chestnut burs, shells, or wood flour increased the intended properties. The enhancements in tensile strength, elastic modulus, and the effects of a pre‐treatment were evaluated. Additionally, it discusses material recovery, recycling, and reuse, particularly how it affects the biodegradability of composites incorporating chestnut waste residues. Highlights Chestnut fruit, shells, and burrs are rich in starch, lignin, and cellulose. The waste of chestnut processing can be used in bioplastics and biocomposites. Chestnut‐based films and biocomposites exhibit promising mechanical properties. The antimicrobial activity, making films, and composites proper for food packaging. New techniques boost performance, offering alternatives to conventional plastics.

Silva, Simão B. [REQUIMTE/LAQV, ISEP, Polytechnic ↗
DOE OSTI2020

Resolving Heterogeneous Dynamics of Excess Protons in Aqueous Solution with Rate Theory

Rate theories have found great utility across the chemical sciences by providing a physically transparent way to analyze dynamical processes. Here we demonstrate the benefits of using transition state theory and Marcus theory to study the rate of proton transfer in HCl solutions. By using long ab initio molecular dynamics simulations we show that good agreement is obtained between these two different formulations of rate theory and how they can be used to study the pathways and life-time of proton transfer in aqueous solution. Since both rate theory formulations utilize identical sets of molecular data, this provides a self-consistent theoretical picture of the rates of aqueous phase proton transfer. Specifically, we isolate and quantify the rates of proton transfer, ion-pair dissociation, and solvent exchange in concentrated HCl solutions. Our analysis predicts a concentration dependence to both proton transfer and ion-pairing. Moreover, our estimate of the life-time for the Zundel species is 0.8 ps and 1.3 ps for 2M and 8M HCl, respectively. In this paper, we demonstrate that concentration effects, can indeed be quantified through the combination of state-of-the-art simulation and theory and provides a picture of the important correlations between the cation (hydronium) and the counter-ion in acid solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strain-Modulated Platinum–Palladium Nanowires for Oxygen Reduction Reaction

Electrocatalytic activity of alloy nanocatalytsts can be manipulated effectively by tuning their physical properties (ensemble, geometric, and ligand effects) to afford optimal surface structure and compositions for proton exchange membrane fuel cell (PEMFC) application. Herein, highly catalytic platinum-palladium nanowires (Pt n Pd 100-n NWs) with a subtle lattice strain and Boerdijk-Coxeter helix type morphology are synthesized through a surfactant-free, thermal single phase solvent method. X-ray diffraction results show that Pt n Pd 100-n NWs are exposed through the (111) facets and their shrinking or expanding lattice parameters can be modulated by the alloy compositions. Electrochemical results reveal that their high catalytic activity correlates with the lattice shrinking, facets, and bimetallic compositions, showing higher activity when the ratio of Pt and Pd is similar to ~78:22, which is further supported by DFT results. Compared to the nanoparticle type platinum-palladium alloyed catalysts with similar metal compositions (Pt n Pd 100-n NPs), the Pt n Pd 100-n NWs exhibit significantly improved electrocatalytic activity and stability for the oxygen reduction reaction. Our findings open new strategies to design the highly active and stable alloy nanocatalysts with controllable compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In-Operando Study of Shape Retention and Microstructure Development in a Hydrolyzing Sol–Gel Ink during 3D-Printing

3D printing of amorphous and crystalline ceramics is of paramount importance for the fabrication of a wide range of devices with applications across different technology fields. Printed ceramics are remarkably enabled by the sol-gel synthesis method in conjunction with continuous filament direct ink writing. During printing, multiple processes contribute to the evolution of inks including shape retention, chemical conversion, solidification, and microstructure formation. Traditionally, depending on the ink composition and printing environment, several mechanisms have been associated with the shape retention and solidification of 3D printed structures: gelation, rapid solvent evaporation, energy-driven phase transformation, and chemical-driven phase transformation. Understanding the fundamental differences between these mechanisms becomes key since they strongly influence the spatiotemporal evolution of the materials, as the out-of-equilibrium processes inherent to the extrusion, relaxation, and solidification of printed materials have significant effects on the materials properties. Herein, we investigate the shape retention mechanism and the hydrolysis-induced material conversion and microstructure formation during the 3D printing of a water reactive sol-gel ink that transforms into titanium dioxide-based ceramic. This study aims at identifying characteristic mechanisms associated with the material transformation, establishing connections between the microstructure development and the timescales associated with solidification under operando 3D-printing conditions. The investigation of this material's out-of-equilibrium pathways under processing conditions is enabled by time-resolved coherent X-ray scattering, providing simultaneous access to temporospatially resolved microstructural and dynamics information. Furthermore, we explore X-ray speckle tracking as a tool to resolve deformations of the microstructure in a printed filament associated with the deposition of consecutive filaments. Through this work, we aim at providing a fundamental understanding of the relationships behind these transformative processes in 3D printing and their timescales as the basis for achieving unprecedented control over printed materials microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deep Eutectic Solvents for Efficient Fractionation of Lignocellulose to Produce Uncondensed Lignin and High-Quality Cellulose

Simultaneously inhibiting lignin condensation and cellulose degradation remains a major challenge for achieving holistic valorization of lignocellulose. Here, we developed a deep eutectic solvent (DES), composed of l-cysteine (Cys) and lactic acid (LA), to fractionate both uncondensed lignin and high-quality cellulose from eucalyptus wood by leveraging the unique properties of Cys, i.e., highly nucleophilic groups (–SH) and hydrogen bond acceptor/donor groups (–NH 2 and –COOH). The nucleophilic –SH in Cys effectively quenches the benzylic carbocations (C α + ions, formed at the benzylic sites of lignin) that lead to lignin condensation. This enables the high yield of uncondensed lignin (81%) with high retention of β–O–4 bonds (up to 90%). The separated uncondensed lignin is further depolymerized to prepare monophenols in a satisfactory 43% yield, equivalent to 73% of the theoretical yield. Moreover, the –NH 2 and –COOH groups in Cys form extensive hydrogen bonds with the hydroxyl groups in cellulose, thus decreasing the interaction energy of DES on cellulose. As a result, the cellulose achieves an astonishing 99% retention and maintains a high degree of polymerization of 1160. The obtained high-quality cellulose is further conversed into cellulose nanofibers for strong and transparent films. Furthermore, this study provides new insights into the efficient separation of uncondensed lignin and high-quality cellulose from lignocellulose by a novel DES system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Radiolytic redox interplay defines nanomaterial synthesis in liquids

Irradiation of a liquid solution generates solvated electrons and radiolysis products, which can lead to material deposition or etching. The chemical environment dictates the dominant reactions. Radiolysis-induced reactions in salt solutions have substantially different results in pure water versus water-ammonia, which extends the lifetime of solvated electrons. We investigate the interplay between transport and solution chemistry via the example of solid silver formation from e-beam irradiation of silver nitrate solutions in water and water-ammonia. The addition of ammonia results in the formation of a secondary ring-shaped deposit tens of microns in diameter (formed over tens of seconds) around the primary point of deposition (formed over milliseconds). Simulations uncover the relative importance of oxidizing and reducing reactions and transport effects. Our explanation of this behavior involves mechanisms beyond ammonia’s role in extending solvated electron lifetimes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Air Dehumidification using Ionic Liquid-Based Fiber Bundle Membrane Contactor

Air dehumidification is essential since excess moisture in the buildings causes discomfort to the occupants, encourages the production of air pathogens such as mold or mildew, and causes corrosion and rotting that degrade building materials. Existing moisture removal processes are mainly focused on condensation and desiccant (liquid or solid) techniques with direct contact between air and desiccant. However, these methods are energy-intensive, or desiccant might be lost or cause corrosion in the process. The main objective of this study is to investigate an ionic liquid-based liquid desiccant absorber based on a membrane fiber bundle. The novel system consists of membrane contactors containing bundles of 10,000 polypropylene fibers. The fiber bundles have 0.3 micron diameter, with ionic liquid flowing inside, and air flowing outside. The fibers provide a high contact area among phases: 1.4 m2 contact surface area in a 0.00015 m3 volume. The ionic liquid as a sorbent stipulates the selectivity for air, prevents the loss of solvent in the operation due to negligible volatility, provides fast diffusion due to low viscosity compared to common ionic liquids, and has high affinity and solubility in water. The dehumidification capacity of the membrane technology was experimentally investigated. The experimental results show that the ionic-liquid based membrane system can effectively remove excess moisture from the air. The novel fiber bundle dehumidification system has a system volume of 0.00798 m3 (7.98 L) and active heat and mass transfer surface area of 8.4 m2. It achieved an average dehumidification of 320 ± 25 W with a volumetric air flowrate of 3.1 m3/min (108 ft3/min).

Turnaoglu, Tugba↗