SEARCH · Engineering Papers

Results for “Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Full-potential circular wake solution of a twisted rotor blade in hover

A solution for transonic flow past a twisted rotor blade in hover is obtained using a modified version of the full-potential code ROT22 and a circular wake. The flow is also evaluated for a fixed-wing-type straight wake. The solutions for the straight wake and circular wake, and the circular wake and a two-dimensional wake are compared. The data reveal that the circular wake and the general two-dimensional wake solutions have similar characteristics.

Aggarwal, Hans R.↗

NASA NTRS1986

Solutions to bi-Maxwellian transport equations for SAR-arc conditions

The first subsonic solutions of the bi-Maxwellian-based 16-moment set of transport equations for stable auroral red (SAR) arc conditions are presented. These are compared with the solutions obtained from the Maxwellian-based 13-moment transport equations for the same boundary conditions. Close agreement between the 16-moment and 13-moment solutions was obtained for the drift velocity, total electron temperature, total proton heat flow, and total electron heat flow profiles. On the other hand, significant discrepancies were found. Thus, the 16-moment density profile falls off more rapidly with increasing altitude than that computed with the 13-moment equations; the total proton temperature is less in the 16-moment case than in the 13-moment case by several thousand degrees at most altitudes; and differences exist in the ratios of the proton and electron temperature anisotropies with the altitude. A simplified set of transport equations was obtained by dropping terms which remain relatively small at all altitudes.

Demars, H. G.↗

NASA NTRS1987

Steady flow past sudden expansions at large Reynolds number. II - Navier-Stokes solutions for the cascade expansion

The equations of motion in the steady laminar flow past a sudden expansion at large Reynolds number, R, reduce to the boundary layer equations as R tends to the freestream valve, when the longitudinal length scale of the separated eddy increases linearly and indefinitely with R. A global Newton method is presently used to obtain finite difference solutions to the steady Navier-Stokes equations up to R of 1000 for a uniform inflow past a cascade of sudden expansions. For large expansion ratio values, the eddy length increases linearly with R; for smaller values, however, where boundary layer equation solutions could not be found, the steady solutions to the Navier-Stokes equations approach the limit of an inviscid eddy in length with increasing R.

Milos, Frank S.↗

NASA NTRS1987

Albedos of homogeneous semi-infinite canopies - Comparison of two-stream analytic and numerical solutions

The albedo of plant canopies is treated as a problem in radiative transfer. Albedos calcualted from an iterative multistream numerical model are compared with those calculated with an analytic two-stream solution. With the assumption of a randomly homogeneous distribution of leaf positions and orientations and isotropic scattering by individual leaves, the single-scattering albedo of the canopy can be found analytically. This single-scattering solution is incorporated into the two-stream solution and used to benchmark the multistream numerical model in the single-scattering limit. Relative errors so established in the multistream model are O(0.3 percent) or less. The two-stream model is also found to be remarkably accurate, with the error in multiply scattered radiation O(5 percent) or less, corresponding to absolute errors in visible albedo of less than 0.001 and near-infrared albedo of less than or equal to 0.01. Thus the two-stream model should be adequate for many purposes, such as climate modeling, provided the assumptions of homogeneous canopy and isotropic scattering are not too unrealistic.

Dickinson, Robert E.↗

NASA NTRS1986

Inverse kinematic solution for near-simple robots and its application to robot calibration

This paper provides an inverse kinematic solution for a class of robot manipulators called near-simple manipulators. The kinematics of these manipulators differ from those of simple-robots by small parameter variations. Although most robots are by design simple, in practice, due to manufacturing tolerances, every robot is near-simple. The method in this paper gives an approximate inverse kinematics solution for real time applications based on the nominal solution for these robots. The validity of the results are tested both by a simulation study and by applying the algorithm to a PUMA robot.

Hayati, Samad A.↗

NASA NTRS1985

Three-dimensional convection in horizontal cylinders - Numerical solutions and comparison with experimental and analytical results

The results of a three-dimensional numerical simulation of Boussinesq free convection in a horizontal differentially heated cylinder are presented. The computation was based on a Samarskii-Andreyev scheme (described by Leong, 1981) and a false-transient advancement in time, with vorticity, velocity, and temperature as dependent variables. Solutions for velocity and temperature distributions were obtained for Rayleigh numbers (based on the radius) Ra = 74-18,700, thus covering the core- and boundary-layer-driven regimes. Numerical solutions are compared with asymptotic analytical solutions and experimental data. The numerical results well represent the complex three-dimensional flows found experimentally.

Smutek, C.↗

NASA NTRS1987

Quality assessment and control of finite element solutions

Status and some recent developments in the techniques for assessing the reliability of finite element solutions are summarized. Discussion focuses on a number of aspects including: the major types of errors in the finite element solutions; techniques used for a posteriori error estimation and the reliability of these estimators; the feedback and adaptive strategies for improving the finite element solutions; and postprocessing approaches used for improving the accuracy of stresses and other important engineering data. Also, future directions for research needed to make error estimation and adaptive movement practical are identified.

Noor, Ahmed K.↗

NASA NTRS1988

Computational technique for compressible vortex flows using the integral equation solution

The steady full-potential equation is written in the form of Poisson's equation, and the solution for the velocity field is expressed in terms of an integral equation. The integral solution consists of two surface integrals and one volume integral. The solution is obtained through successive iteration cycles. Each cycle of iteration consists of two sub-cycles, an inner cycle for wake relaxation and an out cycle for the strength of the source distribution integrals representing the flow compressibility. The density gradients in the source distribution is computed by using a type-differencing scheme of the Murman-Cole type. The method is applied to delta wings and the numerical examples show that a curved shock is captured on the wing suction side beneath the leading edge vortex sheet. Recently, a modified version of the scheme was applied to rectangular wings. In this modified scheme, the surface integral terms were computed by using a bilinear distribution of vorticity on triangular vortex panels which represent the wing and its wake. The results were compared with the available experimental data and they are in good agreement.

Kandil, Osama A.↗

NASA NTRS1988

The solution of the Elrod algorithm for a dynamically loaded journal bearing using multigrid techniques

A numerical solution to a theoretical model of vapor cavitation in a dynamically loaded journal bearing is developed utilizing a multigrid iteration technique. The method is compared with a noniterative approach in terms of computational time and accuracy. The computational model is based on the Elrod algorithm, a control volume approach to the Reynolds equation which mimics the Jakobsson-Floberg and Olsson cavitation theory. Besides accounting for a moving cavitation boundary and conservation of mass at the boundary, it also conserves mass within the cavitated region via a smeared mass or striated flow extending to both surfaces in the film gap. The mixed nature of the equations (parabolic in the full film zone and hyperbolic in the cavitated zone) coupled with the dynamic aspects of the problem create interesting difficulties for the present solution approach. Emphasis is placed on the methods found to eliminate solution instabilities. Excellent results are obtained for both accuracy and reduction of computational time.

Woods, Claudia M.↗

NASA NTRS1988

Eikonal solutions to optical model coupled-channel equations

Methods of solution are presented for the Eikonal form of the nucleus-nucleus coupled-channel scattering amplitudes. Analytic solutions are obtained for the second-order optical potential for elastic scattering. A numerical comparison is made between the first and second order optical model solutions for elastic and inelastic scattering of H-1 and He-4 on C-12. The effects of bound-state excitations on total and reaction cross sections are also estimated.

Cucinotta, Francis A.↗

NASA NTRS1987

Synthesis and solution imidization studies of soluble poly(imide siloxane) segmented copolymers

Soluble metalinked poly(imide siloxane) segmented copolymers were synthesized utilizing a THF/NMP cosolvent system. The presence of dual solvent makes it possibled to reach high molecular weight in the amid acid stage. Incorporation of siloxanes at about 10 weight percent or higher enables the materials to be fully soluble in a range of polar solvents even after imidization. Imidization may be achieved either by conventional thermal methods on cast amic acid films or in appropriate solvent/azeotroping-agent systems employing moderate temperatures. The imidization procedure has been followed by FT-IR and NMR studies. FT-IR studies show the solution imidization follows first order kinetics and proceeds to about 96 percent completion. NMR studies of the isolated products show residual amic acid may be present after solution imidization, but only at very low levels. Properties of the solution imidized materials compared well with those obtained from samples imidized as thin films.

Summers, J. D.↗

NASA NTRS1987

Uniformly-valid asymptotic solutions to the Orr-Sommerfeld equation using multiple scales

The Orr-Sommerfeld equation is studied using the method of multiple scales. The leading-order uniformly-valid asymptotic solutions are obtained without recourse to heuristic methods for two different types of velocity profiles. Solutions were obtained for arbitrary velocity profiles without inflection or critical points and for profiles with simultaneous inflection and critical points. These are shown to reproduce previously obtained solutions in the inner and outer regions.

Long, Lyle N.↗

NASA NTRS1988

Calculations of transonic flows with shocks using Newton's method and direct solver. II - Solution of Euler equations

Transonic flows with shocks are simulated using steady Euler equations and by simultaneously solving the resulting nonlinear algebraic equations using Newton's method. At each iteration, a direct solver computes the corrections and the process is repeated until convergence is achieved. The corrections and errors are reduced quadratically with the present method, allowing solutions of machine accuracy to be obtained in a few steps. Nonunique inviscid solutions and nonunique solutions of the Navier Stokes equations for quasi-one-dimensional flows in nozzles are presented. Calculations are also presented for steady two-dimensional inviscid flows around a cylinder in the transonic regime.

Hafez, M.↗

NASA NTRS1987

Particle paths and phase plane for time-dependent similarity solutions of the one-dimensional Vlasov-Maxwell equations

The phase trajectories of particles in a plasma described by the one-dimensional Vlasov-Maxwell equations are determined qualitatively, analyzing exact general similarity solutions for the cases of temporally damped and growing (sinusoidal or localized) electric fields. The results of numerical integration in both untransformed and Lie-group point-transformed coordinates are presented in extensive graphs and characterized in detail. The implications of the present analysis for the stability of BGK equilibria are explored, and the existence of nonlinear solutions arbitrarily close to and significantly different from the BGK solutions is demonstrated.

Roberts, Dana Aaron↗

NASA NTRS1988

Isothermal magnetostatic atmospheres. II - Similarity solutions with current proportional to the magnetic potential cubed

The paper presents a family of isothermal magnetostatic atmospheres with one ignorable coordinate corresponding to a uniform gravitational field in a plane geometry. The distributed current in the model J is directed along the x-axis, where x is the horizontal ignorable coordinate. The current J is taken to be proportional to the cube of the magnetostatic potential A and falls off exponentially with distance vertical to the base with an e-folding distance equal to the gravitational scale height. A range of similarity solution examples are displayed depending on the values of the similarity parameters. Each similarity parameter corresponds to a symmetry of the underlying nonlinear elliptic equation for A. The similarity parameters also determine the source currents for the potential field solution of the family. The solutions show the interplay between the gravitational force, the J & B force (B, magnetic field induction) and the gas pressure gradient.

Webb, G. M.↗

NASA NTRS1988

Direct solution for thermal stresses in a nose cap under an arbitrary axisymmetric temperature distribution

The design of a nose cap for a hypersonic vehicle is an iterative process requiring a rapid, easy to use and accurate stress analysis. The objective of this paper is to develop such a stress analysis technique from a direct solution of the thermal stress equations for a spherical shell. The nose cap structure is treated as a thin spherical shell with an axisymmetric temperature distribution. The governing differential equations are solved by expressing the stress solution to the thermoelastic equations in terms of a series of derivatives of the Legendre polynomials. The process of finding the coefficients for the series solution in terms of the temperature distribution is generalized by expressing the temperature along the shell and through the thickness as a polynomial in the spherical angle coordinate. Under this generalization the orthogonality property of the Legendre polynomials leads to a sequence of integrals involving powers of the spherical shell coordinate times the derivative of the Legendre polynomials. The coefficients of the temperature polynomial appear outside of these integrals. Thus, the integrals are evaluated only once and their values tabulated for use with any arbitrary polynomial temperature distribution.

Davis, Randall C.↗

NASA NTRS1988

Primitive numerical simulation of circular Couette flow - Carrousel wind tunnel nonturbulent solutions

The azimuthal-invariant, three-dimensional cylindrical, incompressible Navier-Stokes equations are solved to steady state for a finite-length, physically realistic model. The numerical method relies on an alternating-direction implicit scheme that is formally second-order accurate in space and first-order accurate in time. The equations are linearized and uncoupled by evaluating variable coefficients at the previous time iteration. Wall grid clustering is provided by a Roberts transformation in radial and axial directions. A vorticity-velocity formulation is found to be preferable to a vorticity-streamfunction approach. Subject to no-slip, Dirichlet boundary conditions, except for the inner cylinder rotation velocity (impulsive start-up) and zero-flow initial conditions, nonturbulent solutions are obtained for sub- and supercritical Reynolds numbers of 100 to 400 for a finite geometry where R(outer)/R(inner) = 1.5, H/R(inner) = 0.73, and H/Delta-R = 1.5. An axially-stretched model solution is shown to asymptotically approach the one-dimensional analytic Couette solution at the cylinder midheight. Flowfield change from laminar to Taylor-vortex flow is discussed as a function of Reynolds number. Three-dimensional velocities, vorticity, and streamfunction are presented via two-dimensional graphs and three-dimensional surface and contour plots.

Hasiuk, Jan↗

NASA NTRS1988

Poly(imide-siloxane) segmented copolymer structural adhesives prepared by bulk and solution thermal imidization

The improved properties that have been demonstrated through thermal solution imidization in the case of polyimides and poly(imide-siloxane) segmented copolymers suggests significant potential for application of these new materials. Specifically, the enhancement in solubility, moisture reduction, and processability observed through this solution technique is quite dramatic. Previous work has shown that the presence of low amounts of siloxane does not detract significantly from the lap shear strength of these materials to titanium in the case of bulk thermal imidization synthesis. In addition, the siloxane incorporation results in the added advantage of resistance to hot, wet environments. This added durability is presumably due to the hydrophobic siloxane segments preventing the uptake of water at the critical interphase between the adhesive and the adherend. This paper discusses the extension of this work to the solution imidization synthesis technique recently developed in our laboratory. Results dealing with the absolute bond strengths as well as durability and failure surface analysis will be presented.

Bott, R. H.↗