Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The Research and Development of a Soluble Reactants and Products Secondary Battery System

A redox battery system which employs an aqueous dectrolyte is developed. Results are presented of the following experimental studies (1) measurement of the essential physical and chemical properties of the reactants and products; (2) evaluation of commerically available anion membranes as the cell separator, (3) determination of the composition and degradation mechanism of the anion membrane, and/or developing an anion membrane separator; and (4) evaluation of the performance of prototype secondary battery systems.

Liu, C. C.↗

Heat pipe temperature control utilizing a soluble gas absorption reservior

A new gas-controlled heat pipe design is described which uses a liquid matrix reservior, or sponge, to replace the standard gas reservior. Reservior volume may be reduced by a factor of five to ten for certain gas-liquid combinations, while retaining the same level of temperature control. Experiments with ammonia, butane, and carbon dioxide control gases with methanol working fluid are discussed.

Saaski, E. W.↗

Gels as battery separators for soluble electrode cells

Gels are formed from silica powders and hydrochloric acid. The gels are then impregnated into a polymeric foam and the resultant sheet material is then used in applications where the transport of chloride ions is desired. Specifically disclosed is the utilization of the sheet in electrically rechargeable redox flow cells which find application in bulk power storage systems.

Sheibley, D. W.↗

Solubility of Cr, Ti, and Al in co-existing olivine, spinel, and liquid at 1 atm

The partitioning of chromium between olivines, spinels and silicate liquids was studied as a function of temperature, oxygen fugacity, and cooling rate between 1175 and 1300 C and redox states near the Fe-FeO buffer. It is found that the weight ratio of Cr2O3 in olivine to that in the liquid increases slightly as oxygen fugacity decreases, but the effect is very small. The cooling experiments showed that the Cr2O3 content does not re-equilibrate with cooling.

Akella, J.↗

Formulated plastic separators for soluble electrode cells

The fabrication and milling of membranes comprising a hydrochloric acid-insoluble sheet of a mixture of a rubber and a powdered ion transport material are described. The sheet can be present as a coating upon a flexible and porous substrate. These membranes can be used in oxidation-reduction electrical accumulator cells wherein the reduction of one member of a couple is accompanied by the by the oxidation of the other member of the couple on the other side of the cell and this must be accompanied by a change in chloride ion concentration in both sides.

Sheibley, D. W.↗

The solubility of olivine in basaltic liquids - An ionic model

A model is presented which enables the temperature at which olivine is in equilibrium with any alkali-depleted basaltic compound to be calculated to within + or - 30 C. It is noted that the error increases substantially when applied to terrestrial basalts which contain several weight percent alkalis. In addition the model predicts and quantifies the reduced activity of SiO4(4-) monomers due to increasing SiO2 concentrations in the melt. It is shown that the coordination of alumina in melts which precipitate olivine only appears to be dominantly octahedral, while titanium acts as a polmerizing agent by interconnecting previously isolated SiO4(4-) monomers. It is concluded that the model is sufficiently sensitive to show that there are small repulsive forces between Mg(2+) and calcium ions which are in association with normative diopside in the melt.

Herzberg, C. T.↗

Inexpensive cross-linked polymeric separators made from water soluble polymers

Polyvinyl alcohol (PVA) crosslinked chemically with aldehyde reagents produces membranes which demonstrate oxidation resistance, dimensional stability, low ionic resistivity, low zincate diffusivity, and low zinc dendrite penetration rate which make them suitable for use as alkaline battery separators. They are intrinsically low in cost and environmental health and safety problems associated with commercial production appear minimal. Preparation, property measurements, and cell test results in Ni/Zn and Ag/Zn cells are described and discussed.

Hsu, L. C.↗

Method of making formulated plastic separators for soluble electrode cells

A method making a membrane comprised of a hydrochloric acid-insoluble sheet of a mixture of a rubber and a powdered ion transport material is disclosed. The sheet can be present as a coating upon a flexible and porous substrate. These membranes can be used in oxidation-reduction electrical accumulator cells wherein the reduction of one member of a couple is accompained by the oxidation of the other member of the couple on the other side of the cell and this must be accompained by a change in chloride ion concentration in both sides. The method comprises preparing a mixture of fine rubber particles, a solvent for the rubber and a powdered ion transport material. The mixture is formed into a sheet and dried to produce a microporous sheet. The ion transport material includes particles ranging from about 0.01 to 10 microns in size and comprises from 20 to 50 volume percent of the microporous sheet.

Sheibley, D. W.↗

Inexpensive cross-linked polymeric separators made from water-soluble polymers

Polyvinyl alcohol (PVA), cross-linked chemically with aldehyde reagents, produces membranes which demonstrate oxidation resistance, dimensional stability, low ionic resistivity (less than 0.8 Ohms sq cm), low zincate diffusivity (less than 1 x 10 to the -7th mols/sq cm per min), and low zinc dendrite penetration rate (greater than 350 min) which make them suitable for use as alkaline battery separators. They are intrinsically low in cost, and environmental health and safety problems associated with commercial production appear minimal. Preparation, property measurements, and cell test results in Ni/Zn and Ag/Zn cells are described and discussed.

Hsu, L.-C.↗

Water-Soluble Thermoplastic Polyimides

Several thermoplastic polyimide resins that show potential as matrix resins developed. Number of processes for composite fabrication evaluated, including powder processing, which involves deposition of resin powder on graphite fiber from nonresin-solvent slurry. Although powder slurry approach is viable, use of solvent system more amenable with current prepreg manufacturing methods.

Pike, R. A.↗

Adhesive evaluation of LARC-TPI and a water-soluble version of LARC-TPI

The results of a study to evaluate two Langley Research Center thermoplastic polimide (TPI) materials, identified as TPI/MTC for the material from Mitsui Toatsu Chemicals Inc. and TPI/H2O for the material from United Technologies Research Center, as high temperature thermoplastic adhesives and primers for bonding titanium (6AL-4V) adherends are discussed. A limited characterization of the materials was performed using a Diffuse Reflectance-Fourier Transform Infrared Spectroscopy (DR-FTIR) technique. Thermomechanical Analysis (TMA) and torsional braid techniques were used to determine glass transition temperature. The adhesive's strength, as determined by simple lap shear tests, as used to evaluate the effects of long term thermal exposure (up to 1000 hrs) at 204 deg C and a 72-hour water-boil.

Progar, D. J.↗

Influence of damping on quantum interference - An exactly soluble model

This paper reports the result of a calculation which shows the effect of damping on the quantum interference of two Gaussian wave packets in a harmonic potential. The influence-functional method, which seems to be the most appropriate one for this kind of calculation, is used. It is shown that quantum-interference effects are severely diminished by the presence of damping even when its influence on the system is only light. The corrections to the undamped formulas are always expressible in terms of the phenomenological damping constant, the temperature (in the high-temperature limit), the cutoff frequency of the reservoir oscillators, and the mean number of quanta of energy intially present in the system. Both weakly and strongly damped systems are analyzed in the regime of low and high temperatures.

Caldeira, A. O.↗

Adhesive evaluation of LARC-TPI and a water-soluble version of LARC-TPI

The results of a study to evaluate two Langley Research Center thermoplastic polimide (TPI) materials, identified as TPI/MTC for the material from Mitsui Toatsu Chemicals Inc. and TPI/H2O for the material from United Technologies Research Center, as high temperature thermoplastic adhesives and primers for bonding titanium (6AL-4V) adherends are discussed. A limited characterization of the materials was performed using a Diffuse Reflectance-Fourier Transform Infrared Spectroscopy (DR-FTIR) technique. Thermomechanical Analysis (TMA) and torsional braid techniques were used to determine glass transition temperature. The adhesive's strength, as determined by simple lap shear tests, was used to evaluate the effects of long term thermal exposure (up to 1000 hrs) at 204 deg C and a 72-hour water-boil.

Progar, D. J.↗

An analytically soluble problem in fully nonlinear statistical gravitational lensing

The amplification probability distribution p(I)dI for a point source behind a random star field which acts as the deflector exhibits a I exp-3 behavior for large amplification, as can be shown from the universality of the lens equation near critical lines. In this paper it is shown that the amplitude of the I exp-3 tail can be derived exactly for arbitrary mass distribution of the stars, surface mass density of stars and smoothly distributed matter, and large-scale shear. This is then compared with the corresponding linear result.

Schneider, P.↗

Theory of Influence of a Low-Volatility, Soluble Impurity on Spherically-Symmetric Combustion of Fuel Droplets

Analyses are given for the evolution of liquid-phase mass fraction profiles and temperature during combustion of fuel droplets composed of binary miscible mixtures of low-volatility and high-volatility constituents, with small initial mass fractions of the low-volatility material, or slow introduction of low-volatility material into the liquid phase by absorption from the gas phase. The gas phase is assumed to remain quasi-steady and the liquid temperature spatially uniform. The ratio of the liquid-phase diffusion coefficient to the initial burning-rate constant is treated as a small parameter. Asymptotic analyses in this parameter are developed, and the conservation equations are integrated numerically in obtaining descriptions of the combustion history. It is shown that at the surface of the droplet a boundary layer arises in which the mass fraction of the low-volatility component increases with time. The results are used to explain qualitatively some observed conditions of flame contraction and liquid disruption in droplet combustion.

Shaw, B. D.↗