SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Performance Characterization of FB-Line Neutron Multiplicity Counter and Large Neutron Multiplicity Counter

Savanah River National Laboratory’s (SRNL) Nuclear Measurements group was tasked with characterizing the performance of two neutron multiplicity counters located at SRNL. Characterization measurements were made to determine the gate width, pre-delay, deadtime parameters, triples and doubles gate fractions, detector efficiency, and operating high voltage for the Large Neutron Multiplicity Counter (LNMC) and the FB Line Neutron Multiplicity Counter (FBLNMC). The parameters were determined, shown below, and were, as to be expected, slightly different than the previous calibrations, which were performed over 20 years ago. Several Pu samples were measured to validate the characterizations of the FBLNMC and LNMC. The measurements determined the sample Pu-240 mass within <2% deviation for the pure plutonium samples and ~8% for the mixed oxide sample. The pure Pu samples had significantly better accuracy compared with the impure mixed oxide sample due to the lack of induced fission or alpha,n neutrons from impurities. Overall, the characterization of the neutron multiplicity counters, and the determination of their operability has been completed successfully.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Power Prediction of Airborne Wind Energy Systems Using Multivariate Machine Learning

Kites can be used to harvest wind energy at higher altitudes while using only a fraction of the material required for conventional wind turbines. In this work, we present the kite system of Kyushu University and demonstrate how experimental data can be used to train machine learning regression models. The system is designed for 7 kW traction power and comprises an inflatable wing with suspended kite control unit that is either tethered to a fixed ground anchor or to a towing vehicle to produce a controlled relative flow environment. A measurement unit was attached to the kite for data acquisition. To predict the generated tether force, we collected input–output samples from a set of well-designed experimental runs to act as our labeled training data in a supervised machine learning setting. We then identified a set of key input parameters which were found to be consistent with our sensitivity analysis using Pearson input–output correlation metrics. Finally, we designed and tested the accuracy of a neural network, among other multivariate regression models. The quality metrics of our models show great promise in accurately predicting the tether force for new input/feature combinations and potentially guide new designs for optimal power generation.

17 WIND ENERGY↗

DOE OSTI2022

Determination of the 161 Tb half-life

There is significant interest in the use of terbium radioisotopes for applications in cancer therapy and diagnosis. Of these, 161 Tb, a medium energy beta- and prolific auger emitter, is being investigated as a potential alternative to 177 Lu. The higher proportion of conversion electron and Auger electron emissions, and variety of low-energy gammas make 161 Tb an attractive targeted theranostic. As a product of nuclear fission, 161 Tb is also of importance to nuclear forensics. The current evaluated half-life of 6.89(2) d has a standard uncertainty that contributes significantly to the standard uncertainty of decay calculated activity determination. Furthermore, the accuracy of this evaluated half-life has been called into question by measurements reported recently at the Institute of Radiation Physics (IRP), Switzerland. In this work, the half-life of 161 Tb was measured at three independent laboratories located in the United Kingdom and United States of America for a total of five determinations using three independent measurement techniques. In conclusion, the half-life determined for 161 Tb of 6.9637(29) d confirms the observed 1 % relative increase observed by IRP, though the reported half-lives in this work and at IRP are significantly different (ζ-score = 3.1).

half-life↗

DOE OSTI2022

Development towards stable chlorine isotope measurements of astromaterials using the modified Middleton source of an accelerator mass spectrometer

The volatile element Cl can be lost during the formation and evolution of planetary bodies, leading to fractionation of its two stable isotopes 35 Cl and 37 Cl. Chlorine isotope variations (reported as δ 37 Cl in parts per thousand (‰) relative to Standard Mean Ocean Chloride, SMOC) are documented to exceed 80‰ between different lunar rock samples and have been variably interpreted as the fingerprint of degassing during accretion, magma ocean, or volcanic portions of lunar history. The large intersample and intrasample variations observed by both bulk isotope ratio mass spectrometry (IRMS) and in-situ secondary ion mass spectrometry (SIMS) methods are difficult to interpret in part because of a paucity of bulk Cl isotope measurements. This lack of high-precision bulk data is due to the relative rarity of IRMS laboratories capable of making these high precision measurements on small samples of precious planetary materials such as those returned by human or robotic exploration. Here we present a new method for performing high precision δ 37 Cl measurements using the modified Middleton ion source of an existing accelerator mass spectrometer. For samples with as little as 1 μg Cl–the equivalent of 2–4 mm 3 of a typical lunar rock sample–the average cathode accuracy is ~1‰. Finally, cathode reproducibility is typically ~1‰ (2σ) for samples with at least 10 μg of Cl, increasing to ~3–6‰ for aliquots with ~1–2 μg Cl, similar to published SIMS results and sufficient to study astromaterials from the Moon, Mars, or 4 Vesta, which have tens of ‰ observed variations.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2026

Distributed Tomographic Reconstruction with Quantization

Conventional tomographic reconstruction typically depends on centralized servers for both data storage and computation, leading to concerns about memory limitations and data privacy. Distributed reconstruction algorithms mitigate these issues by partitioning data across multiple nodes, reducing server load and enhancing privacy. However, these algorithms often encounter challenges related to memory constraints and communication overhead between nodes. In this paper, we introduce a decentralized Alternating Directions Method of Multipliers (ADMM) with configurable quantization. By distributing local objectives across nodes, our approach is highly scalable and can efficiently reconstruct images while adapting to available resources. To overcome communication bottlenecks, we propose two quantization techniques based on K-means clustering and JPEG compression. Numerical experiments with benchmark images illustrate the tradeoffs between communication efficiency, memory use, and reconstruction accuracy.

Miao, Runxuan↗

DOE OSTI2021

Supervised learning with word embeddings derived from PubMed captures latent knowledge about protein kinases and cancer

Abstract Inhibiting protein kinases (PKs) that cause cancers has been an important topic in cancer therapy for years. So far, almost 8% of >530 PKs have been targeted by FDA-approved medications, and around 150 protein kinase inhibitors (PKIs) have been tested in clinical trials. We present an approach based on natural language processing and machine learning to investigate the relations between PKs and cancers, predicting PKs whose inhibition would be efficacious to treat a certain cancer. Our approach represents PKs and cancers as semantically meaningful 100-dimensional vectors based on word and concept neighborhoods in PubMed abstracts. We use information about phase I-IV trials in ClinicalTrials.gov to construct a training set for random forest classification. Our results with historical data show that associations between PKs and specific cancers can be predicted years in advance with good accuracy. Our tool can be used to predict the relevance of inhibiting PKs for specific cancers and to support the design of well-focused clinical trials to discover novel PKIs for cancer therapy.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Collaborative Research: Improved Efficiency and Coupling of the Radiation Code in the ACME Earth System Model (Final Report)

The complexity of radiative transfer, its importance to the exchange of energy in the climate system, and its high computational cost establishes importance of an accurate and efficient radiative transfer parameterization for climate simulation. Previous work by the proposing team at AER led to the development of the radiation code, RRTMG, which has been widely accepted by the global modeling community as a fast and accurate advancement over the previous generation of radiation codes. It has been in use in the NCAR CESM for many years, and it has been implemented in the initial version the DOE E3SM model. However, its computational cost remains high relative to other components in part due to its complexity and to its inefficient use of modern optimization strategies, and this project helped address this limitation for the code’s application in E3SM. Under other funding, the Investigators of this project led an effort to develop a high-performance broadband radiation code, called RTE+RRTMGP, which is a completely restructured code that will take advantage of modern computational capabilities to enhance its performance while retaining the strengths and accuracy of the original code. Designed to perform over a range of computer architectures, RTE+RRTMGP makes extensive use of Fortran 2003 features to improve both its efficiency and its use of memory. RTE+RRTMGP is expected to be adopted in the next generation of RTE+RRTMGP. This project allowed for advancements to the code’s computational capabilities and adding new and enhanced features. This included revising RTE+RRTMGP to run on GPU processors, analysis of and improvements to the code’s timing, modifying the gas optics in RRTMGP to increase the code’s accuracy, extensive validation of computed fluxes, heating rates and forcings, generating a cloud optical property and vertical sampling capabilities for RTE+RRTMGP, implementing a fast and accurate longwave scattering capability, and groundwork for the inclusion of a capability to specify solar variability. Many of the accomplishment in this project necessitated significant collaboration with the E3SM development team. The result of this project was optimization of a key physical component (radiative transfer calculations) of E3SM, directly supporting E3SM’s overarching global modeling objectives. More broadly, this project provided overall advancements in the use of radiative transfer calculations in atmospheric modeling and simulation, particularly for climate.

58 GEOSCIENCES↗

DOE OSTI2025

Aided Active Learning (AAL) for Enhanced Critical Heat Flux Prediction

Accurate prediction of critical heat flux (CHF) is crucial for the safe and efficient operation of nuclear reactors. Traditional CHF modeling methods often require extensive experimental data, which are hard to obtain. This study introduces the Aided Active Learning (AAL) framework, which strategically minimizes data requirements without sacrificing model accuracy. Unlike conventional Active Learning (AL), AAL introduces an additional step of randomly selecting a subset from the sample pool before applying the query strategy. To evaluate the performance of AAL, two query strategies—uncertainty-based sampling and error-reduction sampling—were evaluated across the following models: random forest (RF), feedforward neural network (FNN), and variational feedforward neural network (vFNN). The proposed framework demonstrated that AAL effectively reduces the number of training samples needed to achieve comparable predictive accuracy. For the RF model, AL required only 710 samples to achieve an R2 score of 0.98, as compared to the 4,785 samples needed by random sampling. Similarly, the FNN model achieved the same R2 score with just 355 samples when using AL, a significant improvement over the 825 samples required by random sampling. In case of uncertainty-based sampling strategy, vFNN attained an R2 of 0.98 with 3,420 samples, reducing the sample requirement by 47% relative to the 6,440 samples needed for random sampling. Its performance suggests that larger training data are required to fully leverage its uncertainty quantification capabilities.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Neural Network Prediction of Strong Lensing Systems with Domain Adaptation and Uncertainty Quantification

Modeling strong gravitational lenses is computationally expensive for the complex data from modern and next-generation cosmic surveys. Deep learning has emerged as a promising approach for finding lenses and predicting lensing parameters, such as the Einstein radius. Mean-variance Estimators (MVEs) are a common approach for obtaining aleatoric (data) uncertainties from a neural network prediction. However, neural networks have not been demonstrated to perform well on out-of-domain target data successfully - e.g., when trained on simulated data and applied to real, observational data. In this work, we perform the first study of the efficacy of MVEs in combination with unsupervised domain adaptation (UDA) on strong lensing data. The source domain data is noiseless, and the target domain data has noise mimicking modern cosmology surveys. We find that adding UDA to MVE increases the accuracy on the target data by a factor of about two over an MVE model without UDA. Including UDA also permits much more well-calibrated aleatoric uncertainty predictions. Advancements in this approach may enable future applications of MVE models to real observational data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Performance Analysis and Radiation Damage Estimation of the Stopping Target Monitor Detectors in Mu2e

The Mu2e experiment aims to search for the charged lepton flavour violating (CLFV) process of a coherent, neutrinoless, conversion of a muon into an electron within the proximity of an aluminium nucleus. Mu2e seeks to measure the ratio (R μe ) of the rate of this conversion process, relative to that of ordinary muon capture. Mu2e will achieve world-leading sensitivity, improving the current limit of Rμe < 7 ×10 -13 (90% C.L.),set by the SINDRUM-II experiment, by an order of 104. This corresponds to a single-event sensitivity of Rμe < 2.87 × 10 -17 (90% C.L.). Many beyond Standard Model (BSM) theories require CLFV to occur at a rate accessible by Mu2e. Any observation of CLFV at Mu2e would have profound implications on particle physics. The Stopping Target Monitor (STM) will be comprised of both a HPGe and a LaBr3 detector which will monitor the signals of photons produced in stopped-muon processes to a required accuracy of 10%. To achieve the desired sensitivity, it is imperative that the detectors perform at their optimal level. The STM detectors are placed within a harsh radiation environment in the form of a high energy ‘flash’ of gamma radiation as well as a flux of fast neutrons. Estimations of radiation damage to HPGe in literature is limited. This thesis reports an approach which utilizes the Kinetic-Energy Released in Matter (KERMA) parameter that considers the energy dependence of the incident flux and the cross-section information for the incident particle. Resampling schemes have been adopted to give a realistic rate over the experiment run time. The results have then been normalized to the radiation damage caused by a 252 Cf source. The estimated time before annealing of the detector is necessary is found to be 75 and 78 months in the case of neutron damage and τ ~ 24 years, 11 months in the case of electron/positron induced damage. This shows significant improvement on the previous estimations.

36 MATERIALS SCIENCE↗

DOE OSTI2024

SSTDR and FDR Detection of Un-Energized and Energized Cable Anomalies Including Thermal Degradation Using Machine Learning

Historically, cables are initially qualified for nuclear power plant use for 40 years. As plants extend their operating license to 60 and 80 years, continued use of these cables must shift to a performance-based approach since it is cost prohibitive to completely replace cables that are likely still capable of performing their design function. A variety of cable tests are available and are commonly applied during outages when the cables can be taken out of service. Frequency domain reflectometry (FDR) is one of these test methods that is being more broadly accepted and used because it not only detects anomalies along the cable with a low-voltage signal that does not stress the cable insulation, but the technique also locates the anomalies. This supports follow-up local inspection and local repair or partial replacement of a damaged cable segment. Currently, FDR testing is only applied to cables that are taken out of service since the test instrument would be damaged by operational voltages. A related technology that has found some acceptance in the aircraft and rail industry is spread spectrum time domain reflectometry (SSTDR). This technology has been implemented with a custom commercial instrument by LiveWire Innovation that is designed to operate on live cables up to 1000 volts and with a bandwidth of 48 MHz. Initial evaluation by the Pacific Northwest National Laboratory (PNNL) of the Live Wire system indicated that a broader bandwidth (BW) SSTDR may be better for many kinds of flaws. This led PNNL to develop an SSTDR laboratory instrument suitable for tests up to 500 MHz bandwidth. Testing on energized cables is also desirable for online monitoring systems so an inductive clamshell coupler was developed that allows energized cables to be tested up to at least 5 kV and likely higher voltage levels. Dielectric spectroscopy and tan delta testing plus various laboratory destructive tests were included in this data acquisition campaign directed to feed a machine learning (ML) study. With these kinds of developments, online energized cable tests may be possible with industrial adoption of such hardware advances but it will be completely impractical to have highly skilled data analysts continually examine these complex signals for indications of damage or compromised conditions. If online testing is to be implemented in new test hardware, it must be accompanied by software that can interpret the signals and alert plant operators of changing or degraded conditions. The thermally aged, shielded cable investigated here was separately treated for ML analysis. Visual analysis of electrical data showed generally increasing peaks where the cable entered and exited the oven. These peaks were not exactly aligned with expected locations, but these differences were attributed to velocity of propagation calibration errors. Only supervised ML was applied to the thermally aged data as this data was only available shortly before the committed publication date of this report. The supervised ML was structured to divide the 0 to 70-day responses as ‘normal’ from 0 to 35 days or ‘anomalous’ from 36 to 70 days, based on cable tensile elongation at break (EAB) insulation characterization. Using 80% of the data for training and 20% for testing, the supervised ML predicted normal versus anomalous was 70% accurate. Important conclusions include: • Accuracy to predict the presence of cable damage is improved from the 2023 effort by more training data. Weighted accuracies for comparisons among the instruments ranged from 67 to 89 % for unsupervised ML and 71 to 99% for supervised ML. • Based on the synthetic data tests, the unsupervised models are more generalizable to unseen anomalies. The Multi-Layer Perceptron classifier (MLP) model reported as high as 99.7% accuracy on the test data, but this dropped to 58.3% when tested on the synthetic data. In contrast, the unsupervised Pointwise model only achieved 89.7% accuracy on the experimental data but reported 78.3% accuracy on the synthetic data. • The best anomaly indicators are higher frequency (400 MHz BW) FDR data. Other tests may be interesting but for this study, this was the best predicter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Multimodel validation of single wakes in neutral and stratified atmospheric conditions

Previous research has revealed the need for a validation study that considers several wake quantities and code types so that decisions on the trade-off between accuracy and computational cost can be well informed and appropriate to the intended application. In addition to guiding code choice and setup, rigorous model validation exercises are needed to identify weaknesses and strengths of specific models and guide future improvements. Here, we consider 13 approaches to simulating wakes observed with a nacelle-mounted lidar at the Scaled Wind Technology Facility (SWiFT) under varying atmospheric conditions. We find that some of the main challenges in wind turbine wake modeling are related to simulating the inflow. In the neutral benchmark, model performance tracked as expected with model fidelity, with large-eddy simulations performing the best. In the more challenging stable case, steady-state Reynolds-averaged Navier–Stokes simulations were found to outperform other model alternatives because they provide the ability to more easily prescribe noncanonical inflows and their low cost allows for simulations to be repeated as needed. Dynamic measurements were only available for the unstable benchmark at a single downstream distance. These dynamic analyses revealed that differences in the performance of time-stepping models come largely from differences in wake meandering. This highlights the need for more validation exercises that take into account wake dynamics and are able to identify where these differences come from: mesh setup, inflow, turbulence models, or wake-meandering parameterizations. In addition to model validation findings, we summarize lessons learned and provide recommendations for future benchmark exercises.

17 WIND ENERGY↗

DOE OSTI2023

Group additivity values for entropy and heat capacities of C 2 –C 8 alkanes, alkyl hydroperoxides, and their radicals

Group additivity values for the thermodynamic properties of oxygenated radicals are poorly determined due to the absence of high quality reference data. Here, a set of 58 group additive values (GAV) for the standard entropy and heat capacity of relevance to alkane oxidation is derived from fits to an extensive and accurate database of standard entropies (298.15 K) and heat capacities (300–3000 K) recently calculated with the “STAR-1D” formalism. The 192 species in this database represent the alkanes (RH), alkyl radicals ($\dot{R}$), alkyl hydroperoxides (RO 2 H), alkyl-peroxy (R$\dot{O}$ 2 ) and hydroperoxy-alkyl ($\dot{Q}$OOH) radicals for all of the isomers of C 2 –C 5 alkane fuels and a select number of isomers of C 6 –C 9 species. The STAR-1D thermochemical data for this set of species was previously obtained from a coupling of scaled B2PLYPD3/cc-pVTZ vibrational analyses with scaled ωB97X-D/cc-pVTZ one-dimensional hindered rotor corrections. The 2σ uncertainties in the GAV results relative to the STAR-1D data set are 2.4 cal K –1 mol –1 for the entropies and at most 2.0 cal K –1 mol –1 for the heat capacities in the temperature range 500–800 K. The 2σ fitting uncertainties in the heat capacity gradually reduce at higher temperatures reaching a value of 0.8 cal K –1 mol –1 at 2000 K decreasing to only 0.5 cal K –1 mol –1 at 3000 K. The high degree of accuracy for the GAV representations is obtained through the introduction of various new group terms, together with the re-optimization of existing group terms. Among the full set of 58 GAV terms, 25 include non-next-nearest neighbor interactions (NNI) and β-corrections. The updated GAVs can be applied in the prediction of entropies and heat capacities for a wide range of hydrocarbons and hydroperoxide species and their radicals, which is important to the accurate prediction of fuel reactivity at low-temperatures in the range 600–1000 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Comparison of Results from Recent NNSA and CEA Measurements of the 239 Pu(n, f) Prompt Fission Neutron Spectrum

The National Nuclear Security Administration (NNSA)/DP French Alternative Energies and Atomic Energy Commission (CEA)/DAM agreement on cooperation on fundamental science is a U.S.-French collaborative effort to combine intellectual and experimental resources and further the relevant nuclear science. Recently, both the NNSA and CEA experimental teams performed high-statistics measurements of the 239 Pu(n, f) prompt fission neutron spectrum (PFNS) at the Los Alamos Neutron Science Center, both of which were recently published in the journal Physical Review C. These separate measurements used the same experimental area and a common neutron detector array, but differ in many aspects, including background assessments, data acquisition systems and philosophies, fission detectors, and PFNS extraction techniques. Hence, some aspects of the experimental methods and associated uncertainties are highly correlated while others are independent. The results from both measurements broke new ground for PFNS measurements given their higher accuracy and more detailed study of corrections necessary for the measured quantity compared to existing literature measurements, and both will significantly impact PFNS nuclear data evaluations for the foreseeable future. Here, the focus of this work is to document a comparison of the results from these distinct measurements in terms of the acquired data, the PFNS results, and the measured average PFNS energies. While systematic differences between the PFNS results are present on the 1–3% level, the acquired data relative to each respective measurement at low incident neutron energies are in remarkable agreement, as are the conclusions regarding the magnitude and position of features in the PFNS relating to second-chance fission, third-chance fission, and pre-equilibrium neutron emission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Complete genomes of Asgard archaea reveal diverse integrated and mobile genetic elements

Asgard archaea are of great interest as the progenitors of Eukaryotes, but little is known about the mobile genetic elements (MGEs) that may shape their ongoing evolution. Here, we describe MGEs that replicate in Atabeyarchaeia, a wetland Asgard archaea lineage represented by two complete genomes. We used soil depth–resolved population metagenomic data sets to track 18 MGEs for which genome structures were defined and precise chromosome integration sites could be identified for confident host linkage. Additionally, we identified a complete 20.67 kbp circular plasmid and two family-level groups of viruses linked to Atabeyarchaeia, via CRISPR spacer targeting. Closely related 40 kbp viruses possess a hypervariable genomic region encoding combinations of specific genes for small cysteine-rich proteins structurally similar to restriction-homing endonucleases. One 10.9 kbp integrative conjugative element (ICE) integrates genomically into theAtabeyarchaeum deiterrae-1chromosome and has a 2.5 kbp circularizable element integrated within it. The 10.9 kbp ICE encodes an expressed Type IIG restriction-modification system with a sequence specificity matching an active methylation motif identified by Pacific Biosciences (PacBio) high-accuracy long-read (HiFi) metagenomic sequencing. Restriction-modification of Atabeyarchaeia differs from that of another coexisting Asgard archaea, Freyarchaeia, which has few identified MGEs but possesses diverse defense mechanisms, including DISARM and Hachiman, not found in Atabeyarchaeia. Overall, defense systems and methylation mechanisms of Asgard archaea likely modulate their interactions with MGEs, and integration/excision and copy number variation of MGEs in turn enable host genetic versatility.

Biochemistry & Molecular Biology↗

DOE OSTI2026

AI-driven neutrino diagnostics and radiation-hard beam instrumentation for next-generation neutrino experiments

The Long Baseline Neutrino Facility (LBNF) at Fermilab will deliver a high-intensity, multi-megawatt neutrino beam to the Deep Underground Neutrino Experiment (DUNE), enabling precision tests of the three-neutrino paradigm, CP violation searches, neutrino mass ordering determination, and supernova neutrino studies. To accelerate DUNE’s physics reach and ensure robust beam operations, we propose an integrated AI-driven framework with real-time diagnostics and radiation-hardened instrumentation. At its core is a Real-Time Beam Integrity Monitor using a physics-informed Digital Twin. By reconstructing pion phase space from muon profiles and exploiting magnetic horn optic linearity, it enables spill-by-spill beam correction and flux stabilization. By using this approach, flux-related systematics could be reduced from 5% to 1%, potentially accelerating the discovery of CP violations by four to six years. Complementing this, a US–Japan R&D effort will deploy a LAPPD-based muon monitor in the NuMI beamline. ToF measurements can be acquired with picosecond precision using this radiation-hard system, enhancing sensitivity to horn chromatic effects. Simulations confirm strong response to these effects. ML models predict beam quality and horn current to sub-percent accuracy from muon data, enhancing anomaly detection and stability. This scalable, AI-enabled strategy improves beam fidelity, reduces systematics, and sets a new standard for high-power accelerator operations.

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗

DOE OSTI2025

Arctic Impact Identification with Less Data Using Variable Relationships: An Exploratory Express LDRD project.

Regional impacts from sea ice loss can be challenging to separate from internal climate variability, potentially requiring thousands of ensemble members. East Asian wintertime cooling has been linked to sea ice loss from present day conditions in the Polar Amplification Model Intercomparison Project with these large ensemble counts. This cooling is theorized to arise from a strengthened Siberian High and East Asian Jet response. The strengthened Siberian High can be detected with one fifth the ensemble members needed for the East Asian wintertime cooling in a single model. We thus hypothesize that leveraging relationships between multiple variables in a conditional pathways-based approach would reduce the number of required ensemble members to conclusively attribute East Asian wintertime cooling to future sea ice concentrations. In all analyzed cases, confidence was increased when evaluating sea ice loss’s responsibility for the joint effects of East Asian cooling, East Asian Jet strengthening, and Siberian High strengthening over just East Asian cooling. However, we were not able to confidently attribute future East Asian wintertime cooling to sea ice loss in a single model. We found that significant intra-ensemble variability within single Earth System Models (ESMs) produced highly uncertain forcing response models upon which attribution results were undermined. We were able to show that ensemble mean seasonally averaged metrics from multiple ESMs greatly improved the accuracy of the forcing response linear models and exposed the necessity of all three steps in the pathway (sea ice area, Siberian High pressure, and East Asian Jet speed) for accurate prediction of East Asian wintertime cooling. Although all three steps were necessary, East Asian wintertime cooling possesses a large dependence on the Siberian High pressure, which weakens the confidence associated with overall strong joint-attribution comparing present day and future scenarios. We believe transitioning the pathway nodes to relative changes between the Siberian High and Aleutian Low as well as between the midlatitude westerlies and subtropical jet in the East Asianj Jet region may be able to produce significant attribution more fully dependent upon all three steps. Ultimately, this research demonstrates the simple extensibility of conditional pathways-based attribution to sea ice loss forcing on the Earth system.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

AI-driven neutrino diagnostics and radiation-hard beam instrumentation for next-generation neutrino experiments

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗