SEARCH · Engineering Papers

Results for “Recombinant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Water-Assisted Lift-Off Process for Flexible CdTe Solar Cells

In recent years, various lift-off methods have been developed to fabricate lightweight and flexible cadmium telluride (CdTe)-based solar cells. In this work, we report flexible cadmium sulfide (CdS)/CdTe solar cells using a water-assisted lift-off approach. Here we demonstrate that an additional cadmium chloride treatment for the CdS film is critical to improve the grain size of CdS and the post-deposited CdTe film and the electron conductivity of the CdS film. As a result, the quality of the CdS/CdTe front junction is significantly improved with reduced nonradiative recombination. Finally, our lightweight and flexible polycrystalline CdTe solar cells demonstrate a champion power conversion efficiency of 12.6%.

14 SOLAR ENERGY↗

DOE OSTI2023

Molten Sodium Penetration in NaSICON Electrolytes at 0.1 A cm –2

High-conductivity solid electrolytes, such as the Na superionic conductor, NaSICON, are poised to play an increasingly important role in safe, reliable battery-based energy storage, enabling advanced sodium-based batteries. Coupled demands of increased current density (≥0.1 A cm –2 ) and low-temperature (<200 °C) operation, combined with increased discharge times for long-duration storage (>12 h), challenge the limitations of solid electrolytes. Here, we explore the penetration of molten sodium into NaSICON at high current densities. Previous studies of β"-alumina proposed that Poiseuille pressure-driven cracking (mode I) and recombination of ions and electrons within the solid electrolyte (mode II) are the two main mechanisms for Na penetration, but a comprehensive study of Na penetration in NaSICON is necessary, particularly at high current density. To further understand these modes, this work employs unidirectional galvanostatic testing of Na|NaSICON|Na symmetric cells at 0.1 A cm –2 over 23 h at 110 °C. Further, while galvanostatic testing shows a relatively constant yet increasingly noisy voltage profile, electrochemical impedance spectroscopy (EIS) reveals a significant decrease in cell impedance correlated with significant sodium penetration, as observed in scanning electron microscopy (SEM). Further SEM analysis of sodium accumulation within NaSICON suggests that mode II failure may be far more prevalent than previously considered. Further, these findings suggest that total (dis)charge density (mAh cm –2 ), as opposed to current density (mA cm –2 ), may be a more critical parameter when examining solid electrolyte failure, highlighting the challenge of achieving long discharge times in batteries using solid electrolytes. Together, these results provide a better understanding of the limitations of NaSICON solid electrolytes under high current and emphasize the need for improved electrode–electrolyte interfaces.

25 ENERGY STORAGE↗

DOE OSTI2025

Light induced ion migration studies in perovskite solar cell using nonlinear impedance spectroscopy

Complex interactions between mobile ions and charge carriers in perovskite solar cells (PSCs) make it challenging to fully understand their dynamic interplay. Exposure to light further complicates these interactions, altering the system’s dynamics and inducing nonlinear effects that lead to changes in the J−V curve. Understanding these effects is crucial for improving the operational stability of PSCs. Impedance spectroscopy (IS) is a powerful technique for evaluating relaxation processes in the frequency domain; however, it is limited in capturing nonlinear contributions. Here, in this work, nonlinear impedance spectroscopy (NLIS) is employed to analyze the higher harmonic response to AC perturbation, both in the dark and after short-term light exposure. A shift in the low-frequency (LF) higher harmonic peak is observed after open-circuit light exposure, attributed to an altered electric field suggesting ion re-distribution, whereas closed-circuit exposure shows no LF shift, indicating minimal ion movement. Additionally, light exposure reduces higher-order admittance, more notably in open-circuit conditions, suggesting decreased recombination. Temperature-dependent analysis was conducted to characterize the activation energy of migrating species, identifying iodide as the dominant migrating ion.

14 SOLAR ENERGY↗

DOE OSTI2025

Ammonolysis Under NH 3 –Limiting Conditions as a Pathway to Improved LaTiO 2 N Water Splitting Photoanodes

LaTiO 2 N is a promising intermediate band gap semiconductor for the water splitting reaction, a pathway to hydrogen fuel from solar energy. However, the photoelectrochemical (PEC) activity of the material is hindered by defects, particularly Ti(III) species, which promote photocarrier recombination. These defects are formed during the high-temperature ammonolysis reaction. Here we show that improved LaTiO 2 N materials can be synthesized under NH 3 -limiting conditions by introducing N 2 to lower the NH 3 partial pressure to0.13atm.This reduces the Ti(III) defect density in the material from 6.06 × 10 16 to ∼4.61 × 10 15 cm −3 , by a factor of 13, based on electron paramagnetic resonance (EPR) spectroscopy. Any remaining Ti(III) defects are localized at the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy (XPS), due to the formation of a depletion layer in the semico. Optical absorption spectra of the improved LaTiO 2 N reveal a blue-shifted band gap absorption edge and a suppressed sub-band gap absorption. Defect removal also reduces a sub-band gap surface photovoltage feature visible in the 1.0 atm reference material. The improved LaTiO 2 N supports a 1.57 mA cm −2 water oxidation photocurrent at 1.23 V RHE under simulated sunlight conditions, and an enhanced quantum efficiency of 4.5% (400 nm) for photocatalytic oxygen evolution from aqueous silver nitrate solution. Stable PEC operation is observed for over 55 min. This confirms that ammonolysis under NH 3 -limiting conditions improves the solar energy conversion properties of LaTiO 2 N. The ability to control metal ion defects in oxynitrides by varying the ammonia partial pressure during ammonolysis might be generally useful for the preparation of metal nitrides and oxynitrides.

defects↗

DOE OSTI2020

Cadmium Selective Etching in CdTe Solar Cells Produces Detrimental Narrow-Gap Te in Grain Boundaries

Recent advances in design and processing technology have made possible commercialization of polycrystalline (px)-CdTe as a photovoltaic absorber. Grain boundaries (GBs) are the most prominent structural defects in these devices and undergo significant changes during device fabrication. However, the effects of device fabrication processes on these GBs are not entirely understood. Prevailing models of GBs in thin-film photovoltaics consider individual GBs to have homogeneous properties in their area. Here, using an aberration-corrected scanning transmission electron microscope (STEM)-based low-loss and core-loss electron energy-loss spectroscopy (EELS), we show that back-surface etching of CdTe leads to inhomogeneity within individual grain boundaries. We observe that etching the back surface leads to the conversion of a region of GBs from CdTe to an elemental Te, which has an only 0.33 eV band gap, as deep as 1 μm from the back surface. The presence of elemental Te in GBs this deep into the absorber layer will increase recombination in the absorber layer and limit the extractable open-circuit voltage, thus reducing device efficiency. However, additive methods for back contact formation such as deposition of Te, ZnTe, or other materials preserve the CdTe stoichiometry of the GBs. Thus, especially for the next generations of CdTe-based cells having longer minority carrier diffusion length and/or thinner absorber layers, additive back contacting methods are superior.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Effects of Surface Terminations of 2D Bi 2 WO 6 on Photocatalytic Hydrogen Evolution from Water Splitting

Two-dimensional (2D)-structured photocatalysts with atomically thin layers not only have the potential to enhance hydrogen generation efficiency but also allow more direct investigations of the effects of surface terminations on photocatalytic activity. In this work, taking 2D Bi 2 WO 6 as a model, we found that the configuration of bilayer Bi 2 O 2 sandwiched by alternating WO 4 layers enabled the thermodynamic driving potential for photocatalytic hydrogen evolution. Without Pt deposition, the H 2 generation efficiency can reach to 56.9 μmol/g/h by 2D Bi 2 WO 6 as compared with no activity of Bi 2 WO 6 nanocrystals under simulated solar light. This configuration is easily functionalized by adsorption of Cl – /Br – to form Bi–Cl/Bi–Br bonds, which leads to the decrease of recombination in photogenerated charge carriers and narrower band gaps. This work highlights an effective way to design photocatalysts with efficient hydrogen evolution by tuning the surface terminations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Back-Surface Passivation of CdTe Solar Cells Using Solution-Processed Oxidized Aluminum

Although back-surface passivation plays an important role in high-efficiency photovoltaics, it has not yet been definitively demonstrated for CdTe. Here, we present a solution-based process, which achieves passivation and improved electrical performance when very small amounts of oxidized Al 3+ species are deposited at the back surface of CdTe devices. The open circuit voltage (V oc ) is increased and the fill factor (FF) and photoconversion efficiency (PCE) are optimized when the total amount added corresponds to ~1 monolayer, suggesting that the passivation is surface specific. Addition of further Al 3+ species, present in a sparse alumina-like layer, causes the FF and PCE to drop as the interface layer becomes blocking to current flow. The optimized deposit increases the average baseline PCE for both Cu-free devices and devices where Cu is present as a dopant. The greatest improvement is found when the Al 3+ species are deposited prior to the CdCl 2 activation step and Cu is employed. In this case, the best-cell efficiency was improved from 12.6 to 14.4%. Furthermore, time-resolved photoluminescence measurements at the back surface and quantum efficiency measurements performed at the maximum power point indicate that the performance enhancement is due to a reduction in the interface recombination current at the back surface.

14 SOLAR ENERGY↗

DOE OSTI2021

Single Nanoflake Photoelectrochemistry Reveals Intrananoflake Doping Heterogeneity That Explains Ensemble-Level Photoelectrochemical Behavior

Transition metal dichalcogenide (TMD) nanoflake thin films are attractive electrode materials for photoelectrochemical (PEC) solar energy conversion and sensing applications, but their photocurrent quantum yields are generally lower than those of bulk TMD electrodes. The poor PEC performance has been primarily attributed to enhanced charge carrier recombination at exposed defect and edge sites introduced by the exfoliation process. Here, a single nanoflake PEC approach reveals how an alternative effect, doping heterogeneity, limits ensemble-level PEC performance. Photocurrent mapping and local photocurrent–potential (i–E) measurements of MoS 2 nanoflakes exfoliated from naturally occurring bulk crystals revealed the presence of n- and p-type domains within the same nanoflake. Interestingly, the n- and p-type domains in the natural MoS 2 nanoflakes were equally efficient for iodide oxidation and tri-iodide reduction (IQE values exceed 80%). At the single domain-level, the natural MoS 2 nanoflakes were nearly as efficient as nanoflakes exfoliated from synthetic n-type MoS 2 crystals. Single domain-level i–E measurements explain why natural MoS 2 nanoflakes exhibit an n-type to p-type photocurrent switching effect in ensemble-level measurements: the n- and p-type diode currents from individual domains oppose each other upon illuminating the entire nanoflake, resulting in zero photocurrent at the switching potential. Furthermore, the doping heterogeneity effect is likely due to nonideal stoichiometry, where p-type domains are S-rich according to XPS measurements. Although this doping heterogeneity effect limits photoanode or photocathode performance, these findings open the possibility to synthesize efficient TMD nanoflake photocatalysts with well-defined lateral p- and n-type domains for enhanced charge separation.

14 SOLAR ENERGY↗

DOE OSTI2021

Impact of n -Butylammonium Bromide on the Chemical and Electronic Structure of Double-Cation Perovskite Thin Films

2D/3D perovskite heterostructures have emerged as a promising material composition to reduce nonradiative recombination in perovskite-based LEDs and solar cells. Such heterostructures can be created by a surface treatment with large organic cations, for example, n-butylammonium bromide (BABr). To understand the impact of the BABr surface treatment on the double-cation (Cs 0.17 FA 0.83 Pb(I 0.6 Br 0.4 ) 3 ) (FA = formamidinium) perovskite thin film and further optimize the corresponding structures, an in-depth understanding of the chemical and electronic properties of the involved surfaces, interfaces, and bulk is required. We study the impact of the BABr treatment with a combination of surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive resonant inelastic soft X-ray scattering (RIXS). A quantitative analysis of the BABr-treated perovskite thin film shows a modified chemical perovskite surface environment of carbon, nitrogen, bromine, iodine, and lead, indicating that the treatment leads to a perovskite surface with a modified composition and bonding structure. With K-edge RIXS, the local environment at the nitrogen and carbon atoms is probed, allowing us to identify the presence of BABr in the perovskite bulk albeit with a modified bonding environment. This, in turn, identifies a "hidden parameter" for the optimization of the BABr treatment and overall performance of 2D/3D perovskite solar cell absorbers.

2D/3D perovskite heterostructure↗

DOE OSTI2022

Engineering Surface Architectures for Improved Durability in III–V Photocathodes

GaInP2 has shown promise as the wide bandgap top junction in tandem absorber photoelectrochemical (PEC) water splitting devices. Among previously reported dual-junction PEC devices with a GaInP 2 top cell, those with the highest performance incorporate an AlInP 2 window layer (WL) to reduce surface recombination and a thin GaInP2 capping layer (CL) to protect the WL from corrosion in electrolytes. However, the stability of these III-V systems is limited, and durability continues to be a major challenge broadly in the field of PEC water splitting. This work provides a systematic investigation into the durability of GaInP 2 systems, examining the impacts of the window layer and capping layer among single junction pn-GaInP 2 photocathodes coated with an MoS 2 catalytic and protective layer. The photocathode with both a CL and WL demonstrates the highest PEC performance and longest lifetime, producing a significant current for >125 h. In situ optical imaging and post-test characterization illustrate the progression of macroscopic degradation and chemical state. The surface architecture combining an MoS 2 catalyst, CL, and WL can be translated to dual-junction PEC devices with GaInP 2 or other III-V top junctions to enable more efficient and stable PEC systems.

08 HYDROGEN↗

DOE OSTI2022

Temperature-Dependent Carrier Extraction and the Effects of Excitons on Emission and Photovoltaic Performance in Cs0.05FA0.79MA0.16Pb(I0.83Br0.17)3 Solar Cells

The photovoltaic parameters of triple cation perovskite [Cs0.05FA0.79MA0.16Pb(I0.83Br0.17)3] solar cells are investigated focusing on the electro-optical properties and differences in performance at low and high temperatures. The signature of a parasitic barrier to carrier extraction is observed at low temperatures, which results in a loss of performance at T < 200 K. Intensity-dependent measurements indicate extraction across this parasitic interface is limited by a combination of the exciton binding energy and thermionic emission. However, the photovoltaic performance of the device is recovered at low intensity - where the photocarrier generation rate threshold is lower than the thermionic extraction rate. Loss of solar cell performance is also observed to be strongly correlated to an increase in photoluminescence intensity, indicating inhibited carrier extraction results in strong radiative recombination and that these systems do not appear to be limited by significant thermally activated non-radiative processes. Evidence of limited carrier extraction due to excitonic effects is also observed with a strong anti-correlation in photoluminescence and carrier extraction observed at lower temperatures.

barrier↗

DOE OSTI2023

Nanoprecipitates to Enhance Radiation Tolerance in High-Entropy Alloys

The growth of advanced energy technologies for power generation is enabled by the design, development, and integration of structural materials that can withstand extreme environments, such as high temperatures, radiation damage, and corrosion. High-entropy alloys (HEAs) are a class of structural materials in which suitable chemical elements in four or more numbers are mixed to typically produce single-phase concentrated solid solution alloys (CSAs). Many of these alloys exhibit good radiation tolerance like limited void swelling and hardening up to relatively medium radiation doses (tens of displacements per atom (dpa)); however, at higher radiation damage levels (>50 dpa), some HEAs suffer from considerable void swelling limiting their near-term acceptance for advanced nuclear reactor concepts. In this study, we developed a HEA containing a high density of Cu-rich nanoprecipitates distributed in the HEA matrix. The Cu-added HEA, NiCoFeCrCu 0.12 , shows excellent void swelling resistance and negligible radiation-induced hardening upon irradiation up to high radiation doses (i.e., higher than 100 dpa). The void swelling resistance of the alloy is measured to be significantly better than NiCoFeCr CSA and austenitic stainless steels. Density functional theory simulations predict lower vacancy and interstitial formation energies at the coherent interfaces between Cu-rich nanoprecipitates and the HEA matrix. The alloy maintained a high sink strength achieved via nanoprecipitates and the coherent interface with the matrix at a high radiation dose (~50 dpa). From our experiments and simulations, the effective recombination of radiation-produced vacancies and interstitials at the coherent interfaces of the nanoprecipitates is suggested to be the critical mechanism responsible for the radiation tolerance of the alloy. Furthermore, the materials design strategy based on incorporating a high density of interfaces can be applied to high-entropy alloy systems to improve their radiation tolerance.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Characterizing Density and Spatial Distribution of Trap States in Ta 3 N 5 Thin Films for Rational Defect Passivation

Tantalum nitride (Ta 3 N 5 ) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta 3 N 5 films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta 3 N 5 . This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 10 22 cm –3 at the interfaces of neat Ta 3 N 5 thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta 3 N 5 thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 10 17 cm –3 . This information, coupled with the present understanding of native oxide layers on Ta 3 N 5 , has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta 3 N 5 thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 10 16 cm –3 . The surface passivation of Ta 3 N 5 films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. Here, this illustrates how developing a deeper understanding of the distribution and influence of defects in Ta 3 N 5 thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta 3 N 5 thin film devices.

defect passivation↗

DOE OSTI2024

Crystalline Si Surface Passivation with Nafion for Bulk Defects Detection with Electron Paramagnetic Resonance

Here, in monocrystalline Si (c-Si) solar cells, identification and mitigation of bulk defects are crucial to achieving a high photoconversion efficiency. To spectroscopically detect defects in the c-Si bulk, it is desirable to passivate the surface defects. Passivation of the c-Si surface with dielectrics such as Al 2 O 3 and SiNx requires deposition at elevated temperatures, which can influence defects in the bulk. Herein, we report on the passivation of different Czochralski (Cz) Si wafer surfaces by an organic copolymer, Nafion. We test the efficacy of the surface passivation at temperatures ranging from 6 to 473 K to detect bulk defects using electron paramagnetic resonance (EPR) spectroscopy. By comparing with state-of-the-art passivation layers, including Al 2 O 3 and liquid HF/HCl, we found that at room temperature, Nafion can provide comparable passivation of n-type Cz Si with an implied open-circuit voltage (iV oc ) of 713 mV and a recombination current prefactor J o of 5 fA/cm 2 . For p-type Cz Si, we obtained an iV oc of 682 mV with a J o of 22.4 fA/cm 2 . Scanning electron microscopy and photoluminescence reveal that Nafion can also be used to passivate the surface of c-Si solar cell fragments scribed from a solar cell module by using a laser. Consistent with previous studies, analysis of the EPR spectroscopy data confirms that the H-terminated surface is necessary, and fixed negative charge in Nafion is responsible for the field-effect passivation. While the surface passivation quality was maintained for almost 24 h, which is sufficient for spectroscopic measurements, the passivation degraded over longer durations, which can be attributed to surface SiO x growth. These results show that Nafion is a promising room-temperature surface passivation technique to study bulk defects in c-Si.

14 SOLAR ENERGY↗

DOE OSTI2024

Sputter-Coated TiO 2 Films as Passivation and Hole Transfer Layers for Improved Energy Conversion with Solar Fuel WO 3 /CuWO 4 Photoanodes

Atomic layer deposited (ALD) “leaky” TiO 2 have gained interest as charge-selective protection layers for semiconductor solar fuel electrodes. Here we demonstrate the use of sputter-deposited TiO 2 layers as hole selective contacts for WO 3 /CuWO 4 type 2 heterojunction water oxidation photoanodes for the first time. TiO 2 protection layers with varying thicknesses (2 to 128 nm) were deposited using the RF magnetron sputtering technique. The resulting TiO 2 films are amorphous based on Raman spectroscopy and powder XRD. Photoelectrochemical scans and Vibrating Kelvin probe photovoltage spectroscopy show that 2-8 nm TiO 2 layers nearly double the photocurrent to 0.97 mA cm -2 under AM 1.5 illumination (19% AQE at 350 nm), increase the surface photovoltage signal by 25%, and increase the WO 3 /CuWO 4 bandgap. These effects can be attributed to the selectivity of TiO 2 for photoholes. Additionally, SPV data suggest that TiO 2 overlayers suppress copper-based surface recombination defects. Reduced photocurrent and the photovoltage are seen in thicker TiO 2 films (16 to 128 nm) as a result of an increasing hole transfer resistance and because of light shading effects according to photoaction spectra. The TiO 2 films also improve the stability of the WO 3 /CuWO 4 photoelectrodes, allowing nearly constant O 2 evolution over 3 hours after an initial 20-35% loss. Overall, this work establishes RF magnetron sputtering as a useful method to install amorphous TiO 2 passivation layers for improved WO 3 /CuWO 4 solar fuel photoelectrodes. Furthermore, we show how the combination of PEC with SPV measurements provides insight into the function of the TiO 2 coatings.

CuWO4↗

DOE OSTI2025

Deposition-Dependent Coverage and Performance of Phosphonic Acid Interface Modifiers in Halide Perovskite Optoelectronics

In this work, we study the effect of various deposition methods for phosphonic acid interface modifiers commonly pursued as self-assembled monolayers in high-performance metal halide perovskite photovoltaics and light-emitting diodes. We compare the deposition of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid onto indium tin oxide (ITO) bottom contacts by varying three parameters: the method of deposition, specifically spin coating or prolonged dip coating; ITO surface treatment via HCl/FeCl3 etching; and use in combination with a second modifier, 1,6-hexylenediphosphonic acid. We demonstrate that varying these modification protocols can impact time-resolved photoluminescence carrier lifetimes and quasi-Fermi level splitting of perovskite films deposited onto the phosphonic acid-modified ITO. Ultraviolet photoelectron spectroscopy shows an increase in the effective work function after phosphonic acid modification and clear evidence for photoemission from carbazole functional groups at the ITO surface. We used X-ray photoelectron spectroscopy to probe differences in phosphonic acid coverage on the metal oxide contact and show that perovskite samples grown on ITO with the highest phosphonic acid coverage exhibit the longest carrier lifetimes. Finally, we establish that device performance follows these same trends. These results indicate that the reactivity, heterogeneity, and composition of the bottom contact help to control recombination rates and therefore power conversion efficiencies. ITO etching, prolonged deposition times for phosphonic acids via dip coating, and the use of a secondary, more hydrophilic bisphosphonic acid all contribute to improvements in surface coverage, carrier lifetime, and device efficiency. Furthermore, these improvements each have a positive impact, and we achieve the best results when all three strategies are implemented.

contact engineering↗

DOE OSTI2026

Gold-Induced Chemical Perturbations in CdTe-Based Photovoltaic Cells

Back-contacting p-type CdTe has been identified as one of the major areas of loss in CdTe photovoltaic (PV) power conversion efficiency (PCE). In research settings, Au is a common contact material due to its ease of use and decent performance. This work provides a detailed investigation into using gold for back contacting As-doped, CdCl 2 -treated, polycrystalline CdTe that has been exposed to air after absorber processing, another routine practice. First, X-ray photoemission spectroscopy (XPS) is used to determine the native oxide to be 1.6 nm of CdTeO 3 by using a combination of angle-resolved XPS and the cadmium-modified Auger parameter. During gold metallization of CdTe, oxygen and oxidized tellurium are eliminated from the thin CdTeO 3 native oxide. The fates of the released oxygen and possibly cadmium and tellurium are not known, but these reaction byproducts can enter the absorber bulk or grain boundaries, stay at the interface, or dissolve in the Au. Interfacial hole barriers between CdTe and Au are measured for samples with and without the native oxide present prior to metallization. Results show that the thin CdTeO 3 alleviates the downward band bending by 40 meV from 470 to 430 meV even though it is consumed during interface formation. The implications of these chemical reactions on the device are assessed through photoluminescence (PL) spectroscopy, which shows losses in internal open circuit voltage (iVoc) from 820 to 795 meV, carrier lifetime from 123 to 45 ns, and PL quantum yield from 2.9 × 10 −5 to 1.2 × 10 −5 . Modeling timeresolved PL lifetimes demonstrates the back surface recombination velocity due to metallization reduces minority carrier lifetimes. These results identify the native oxide and show that it plays an important role in mediating downward band bending along with how the back interface reaction can negatively impact device-scale parameters and reduce PV PCE.

14 SOLAR ENERGY↗

DOE OSTI2026

Synergistic CuWO 4 /NiS 2 Binary Nanostructures for Efficient Photocatalytic Hydrogen Production

A viable and ecologically safe method for producing green hydrogen is photocatalytic hydrogen (H 2 ) production. However, the development of effective semiconductor materials with improved activity and long-term stability is still a major obstacle. Here, in this work, we report the development of a broadband-gap, UV light-responsive CuWO 4 /NiS 2 nanocomposite using simple hydrothermal and wet impregnation techniques. The hybrid systems, with photocatalytic presentation, were thoroughly assessed using spectroscopic, photophysical, and microscopic characterization methods. The optimized CuWO 4 /NiS 2 nanostructure demonstrated an impressive H 2 generation rate of 28.2 mmol h –1 g –1 under light irradiation, which is roughly 2.71 and 3.28 times greater than those of pristine CuWO 4 (10.4) and NiS 2 (8.6 mmol h -1 g (cat) -1 ), respectively. The enhanced presentation is ascribed to the synergetic interface between the coupled semiconductors, which facilitates the formation of a nanostructure. This arrangement inhibits electron–hole recombination and encourages effective charge carrier parting. Additionally, compared with pristine CuWO 4 and NiS 2 , respectively, the CuWO 4 /NiS 2 composite showed a noticeably greater photocurrent density. The developed nanostructured CuWO 4 /NiS 2 displayed a 28.6% quantum efficiency at 450 nm. These outcomes validate CuWO 4 /NiS 2 ’s significant aptitude as a non-noble-metal photocatalyst for the production of sustainable hydrogen.

CuWO4/NiS2↗