Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Ring current development during the great geomagnetic storm of February 1986

The variations of the ring current energy density and composition during the great magnetic storm of February 1986 were investigated using particle measurements obtained by the charge-energy-mass instrument on the AMPTE Charge Composition Explorer spacecraft. The ring current composition of this storm, which had a complicated main phase and a minimum Dst of -312 nT on February 9, was followed for five days from the prestorm quiet time to the early recovery phase. Results suggested that the very rapid initial Dst recovery (tau of about 9.3 hrs) in this storm resulted largely from the rapid loss of 75- to 100-keV O(+) via charge exchange in the inner portion of the ring current. It is proposed that a major O(+) + N(+) ring current component generally exists near the maximum phase of great storms.

Hamilton, D. C.↗

Evaluation of the resiliency characteristics of several candidate Solid Rocket Booster O-ring materials

Resiliency tests have been conducted in order to evaluate O-ring sealing response in the revised Space Shuttle SRBs, giving attention to the effects of temperature and gap-opening rates. Additional testing was conducted to ascertain O-ring responses to simulated SRB field-joint deflections. All tests employed a face-seal fixture mounted on a servohydraulic apparatus. The Viton candidate O-ring material tracked the gap-opening rate better at higher temperatures and lower gap-opening rates; it was also the only material inert to the calcium grease employed. Heaters must be used to maintain the 70 F minimum temperature at which the Viton O-ring will track the required gap opening rate.

Lach, C. L.↗

Monolithic nonplanar ring lasers - Resistance to optical feedback

The sensitivity of a monolithic unidirectional nonplanar ring laser to optical feedback depends on the polarization eigenmodes of the resonator, which are complicated functions of the resonator geometry. Resonator geometries that increase the loss difference between the two directions of propagation around the ring improve the resistance of the lasers to optical feedback. Here, measurements on Nd:YAG nonplanar ring lasers having two different ring geometries are discussed. Currently, 1 percent optical feedback produces a 10 percent reduction in useful output power for the more feedback-resistant oscillator, a tenfold improvement over previous designs.

Nilsson, Alan C.↗

Radiative transfer modeling of Saturn's outer B ring

The present investigation of Voyager images of the Saturn outer B ring's light-scattering behavior gives attention to the four radial regions formed by brighter and darker areas within and outside the 'spokes'. The B-ring particles are found to have a strongly backscattering phase function and a large-particle scattering albedo of 0.54 in the dark regions and 0.58 in the bright ones; these albedos are interpretable as due to multiple scattering among very pure ice grains covering the ring particle surfaces. It is shown that dark micrometeoroid impacts into the B ring would have darkened the particles to their current spherical albedo in as little as 100 to 200 million years.

Doyle, Laurance R.↗

Ring cusp/hollow cathode discharge chamber performance studies

An experimental study performed to determine the effects of hollow cathode position, anode position, and ring cusp magnetic field configuration and strength on discharge chamber performance is described. The results are presented in terms of comparative plasma ion energy cost, extracted ion fraction, and beam profile data. Results show that the rate of primary electron loss to the anode decreases as the anode is moved downstream of the ring cusp toward the screen grid and that the loss rate of ions to hollow cathode surfaces are excessive if the cathode is located upstream of a point of peak magnetic flux density at the discharge chamber centerline. Moreover, the fraction of the ions produced that are lost to discharge chamber walls and ring magnet surfaces is reduced by positioning of the magnet rings so the plasma density is uniform over the grid surface, and adjusting their strength to a level where it is sufficient to prevent excessive ion losses by Bohm diffusion.

Vaughn, J. A.↗

Sequentially evaporated thin film YBa2Cu3O(7-x) superconducting microwave ring resonator

There is great interest in the application of thin film high temperature superconductors in high frequency electronic circuits. A ring resonator provides a good test vehicle for assessing the microwave losses in the superconductor and for comparing films made by different techniques. Ring resonators made of YBa2Cu3O(7-x) have been investigated on LaAlO3 substrates. The superconducting thin films were deposited by sequential electron beam evaporation of Cu, Y, and BaF2 with a post anneal. Patterning of the superconducting film was done using negative photolithography. A ring resonator was also fabricated from a thin gold film as a control. Both resonators had a gold ground plane on the backside of the substrate. The ring resonators' reflection coefficients were measured as a function of frequency from 33 to 37 GHz at temperatures ranging from 20 K to 68 K. The resonator exhibited two resonances which were at 34.5 and 35.7 GHz at 68 K. The resonant frequencies increased with decreasing temperature. The magnitude of the reflection coefficients was in the calculation of the unloaded Q-values. The performance of the evaporated and gold resonator are compared with the performance of a laser ablated YBa2Cu3O(7-x) resonator. The causes of the double resonance are discussed.

Rohrer, Norman J.↗

A phase-space fluid simulation of a two-component narrow planetary ring - Particle size segregation, edge formation, and spreading rates

The Krook kinetic equation for identical planetary ring particles is presently generalized for the case of two-component systems, and the equations are numerically solved on the basis of Brophy and Esposito's (1989) phase-space CFD method. Attention is given to the simulation results obtained for a two-component narrow ring, in which the large particles are eight times as massive as the small particles. This ring's unconstrained edge dynamics are resolved by the simulation, and are found to exhibit a sharpening that would not have been expected in single-component rings.

Brophy, Thomas G.↗

Bombardment of planetary rings by meteoroids - General formulation and effects of Oort Cloud projectiles

A general solution is obtained for the angular distribution of the intensity and velocity of interplanetary projectiles impinging on a planetary ring system. Three significant results emerge from the solution: (1) a variation with orbital longitude is demonstrated in the impact velocity-weighted impact rate of the planetary rings' cometary meteoroids; (2) the angular distribution of ejecta intensity due to the bombardment of a planetary ring by interplanetary meteoroids is determined; and (3) the radial drift velocity due to both simple mass-loading and aberration-induced asymmetry in the impact rate is calculated for a planetary ring of arbitrary optical depth. Attention is given to results for projectiles with Oort Cloud-type orbits.

Cuzzi, Jeffrey N.↗

Perpendicular heating of electrons by upper hybrid waves generated by a ring distribution

Satellite observations of electron conical distributions with enhanced fluxes just outside the loss cone suggest that telectrons have been heated perpendicularly to the magnetic field in the mid-altitude polar magnetosphere. To understand electron conical distributions, plasma simulations are conducted to examine an upper hybrid wave instability of a ring electron distribution perpendicular to the magnetic field in a cold electron background. The simulations indicate that both the cold and ring distributions are heated perpendicularly during the saturation stage. From the plasma data, a ring distribution can be identified as a trapped distribution function with an enhancement near 90-deg pitch angle in the phase space density plot. It is suggested that the ring distribution might provide an additional free energy source for generating upper hybrid waves associated with electron conical events.

Lin, C. S.↗

Spiral waves in Saturn's rings

Spiral density waves and spiral bending waves have been observed at dozens of locations within Saturn's rings. These waves are excited by resonant gravitational perturbations from moons orbiting outside the ring system. Modeling of spiral waves yields the best available estimates for the mass and the thickness of Saturn's ring system. Angular momentum transport due to spiral density waves may cause significant orbital evolution of Saturn's rings and inner moons. Similar angular momentum transfer may occur in other astrophysical systems such as protoplanetary disks, binary star systems with disks and spiral galaxies with satellites.

Lissauer, Jack J.↗

Placement Of O-Rings In Solid Rocket Booster

Brief report proposes to modify placement of O-ring seals in joints of Solid Rocket Booster of Space Shuttle. Modified joint and seal essentially "inside-out" version of old joint and seal. O-rings placed between outer side of tang and clevis. Joint rotation pushes tang harder against O-rings, thereby making even tighter seal. Proposal derived from analysis of Space Shuttle Challenger disaster, attributed to failure of these O-ring seals.

Wood, Charles↗

Star formation on the leading edge of a ring-like density wave in Arp 143

NGC 2445 is a member of the pair of interacting galaxies Arp 143 (=VV117) and has been classified as an irregular ring galaxy by deVaucouleurs et al. (1976). Although not obviously a classical ring galaxy from its optical appearance, it nevertheless shows many of the symptoms of a collisional off-center ring galaxy in the early stages of development. Optically the galaxy shows a rough ring of super-giant HII regions distributed asymmetrically with respect to the nucleus with most of the emission concentrated on the western side of the galaxy. Researchers mapped the HI emission in this system (with F. Ghigo and J. van Gorkom; NRAO) and the observations show that the disk of NGC 2445 is characterized by a large-scale banana-shaped HI wave with its peak to the west of the nucleus. Nearing-IR imaging (with E. I. Robson and A. J. Adamson; Lancs. Polytechnic, U.K.) demonstrates that, like the HI, the underlying population of old stars is very asymmetrically distributed with the bulk of the stars concentrated to the western side of the galaxy.

Appleton, P. N.↗

The ringed X-galaxy NGC 7020

The southern SO (sup +) galaxy NGC 7020 presents an unusual morphology: it includes a very regular outer ring which is completely detached and which envelops an inner ring/lens zone with a hexagon surrounding an X shape. The outer ring has a high contrast compared to those usually observed in barred galaxies, yet NGC 7020 is not obviously barred. The morphology of this galaxy poses an interesting puzzle in that the hexagonal/X zone is not a typical type of feature to find in the interior of such a regular ring. Instead, the zone bears a striking resemblance to the edge-on galaxy IC 4767, recently studied by Whitmore and Bell (1988 = WB88) and dubbed by them as the X-galaxy because its inner regions appear to be crossed by two distinct enhancements lined at plus or minus 22 deg with respect to the major axis. The observation of a similar phenomenon in NGC 7020 is interesting because of the suggestion by WB88 that X structures could be related to accretion of matter associated with a merger or tidal encounter between an SO and a small satellite galaxy. If this interpretation is correct for NGC 7020, then it has important implications for the nature of the outer ring. An alternative interpretation is that the inner hexagonal/X zone is a region where resonant periodic orbits in a weak bi-symmetric potential perturbation are influencing the morphology more strongly than might be expected. A brief summary of a more extensive paper (Buta 1990c = B90c) and a few other details concerning this interesting galaxy are given.

Buta, Ronald↗

A kinematic determination of the structure of the double ring planetary nebula NGC 2392, the Eskimo

Slit spectra and existing 'velocity cube' data have been used to determine the structure of the double ring PN NGC 2392. The inner shell is a stellar wind-sculpted prolate spheroid with a ratio of axes of 2:1 and the approaching end of the long axis pointed 20 deg from the line of sight in P.A. = 200 deg. The outer ring is caused by an outer disk with density dropping off with distance from the central star and with distance from its plane, which is the same as the equatorial band of high density in the inner shell. The outer disk contains a ring of higher density knots at a distance of 16 arcsec and is losing material through free expansion, forming an outer envelope of increasing velocity. Forbidden S II spectra are used to determine the densities in all of the major regions of the nebula. It is argued that the filamentary cores at the centers of the knots seen in the outer ring originate in the sublimation of bodies formed at the same time as the parent star.

O'Dell, C. R.↗

Saturn's rings through a microscope - Particle size constraints from the Voyager PPS scan

The Voyager-2 photopolarimeter PPS experiment obtained the highest resolution of any ring observation of Saturn, profiling the variation of optical depth in radial steps of about 100 meters. A detailed treatment of the PPS statistics is presented here, and it is shown how these statistics can be related to the particle size distribution. An expression for the excess noise in the scan due to large particles is obtained, and the observed noise is used to constrain the upper end of the size distribution through the rings. It is shown that the Cassini Division and the C Ring have the smallest proportion of large particles, while the A ring has the largest proportion.

Showalter, Mark R.↗

On the radial structure of Saturn's B ring

Voyager observations have revealed that the Saturnian B ring is much more structured than previously anticipated. Some of these structures occur on radial scale lengths of less than 15 km. In the visible the ring an optical depth minimum at a small distance outside of synchronous orbit. It is suggested in this paper that the electromagnetically induced radial transport of angular momentum associated with radial transport of charged submicron-size dust particles may explain these features. This mechanism induces an instability which produces, over geological times, significant radial structuring of the ring. Mass contained in particles less than about 1 cm in size is transported away from the synchronous orbit. This produces the optical depth minimum there. A simulation, starting with a radially uniform mass and number density, yields a radial optical depth profile which is similar to what is observed. It is found that it takes about 400-800 million yr to produce the observed structure. This estimate for the age of B ring agrees with some other independent estimates.

Shan, Lin-Hua↗

Ring nebulae around Wolf-Rayet stars in M33

Results of a systematic search for H II ring nebulae surrounding Wolf-Rayet (WR) stars in M33 are presented. Eleven objects are found to be good candidates, while eight others are classified as possible WR ring nebulae. The WR rings in M33 are larger on average than their Galactic counterparts, but the H-alpha luminosity of most of them is comparable to the bright Galactic wind-blown bubbles. The rings are associated with WC as well as with WN stars.

Drissen, Laurent↗

Vortex ring bubbles

Toroidal bubbles with circulation are studied numerically and by means of a physically motivated model equation. Two series of computations are performed by a boundary-integral method. One set shows the starting motion of an initially spherical bubble as a gravitationally driven liquid jet penetrates through the bubble from below causing a toroidal geometry to develop. The jet becomes broader as surface tension increases and fails to penetrate if surface tension is too large. The dimensionless circulation that develops is not very dependent on the surface tension. The second series of computations starts from a toroidal geometry, with circulation determined from the earlier series, and follows the motion of the rising and spreading vortex ring. Some modifications to the boundary-integral formulation were devised to handle the multiply connected geometry. The computations uncovered some unexpected rapid oscillations of the ring radius. These oscillations and the spreading of the ring are explained by the model equation which provides a more general description of vortex ring bubbles than previously available.

Lundgren, T. S.↗