Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFRACTIVE INDEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Femtosecond laser ablation of dielectric materials in the optical breakdown regime: Expansion of a transparent shell

Phase transition pathways of matter upon ablation with ultrashort laser pulses have been considered to be understood long-since for metals and semiconductors. We provide evidence that also certain dielectrics follow the same pathway, even at high pulse energies triggering optical breakdown. Employing femtosecond microscopy, we observe a characteristic ring pattern within the ablating region that dynamically changes for increasing time delays between pump and probe pulse. These transient Newton rings are related to optical interference of the probe beam reflected at the front surface of the ablating layer with the reflection at the interface of the non-ablating substrate. Analysis of the ring structure shows that the ablation mechanism is initiated by a rarefaction wave leading within a few tens of picoseconds to the formation of a transparent thin shell of reduced density and refractive index, featuring optically sharp interfaces. The shell expands and eventually detaches from the solid material at delays of the order of 100 ps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of fine oscillations in the photoluminescence spectrum of 2-dimensional electron gas formed in AlGaN/GaN high electron mobility transistor structures

An unambiguous identification of the fine oscillations observed in the low temperature photoluminescence (PL) spectra of AlGaN/GaN based high electron mobility transistor (HEMT) structures is carried out. In literature, such oscillations have been erroneously identified as the sub-levels of 2-dimensional electron gas (2DEG) formed at AlGaN/GaN heterointerface. Here, the origin of these oscillations is probed by performing the angle dependent PL and reflectivity measurements under identical conditions. Contrary to the reports available in literature, we find that the fine oscillations are not related to 2DEG sub-levels. The optical characteristics of these oscillations are mainly governed by an interference phenomenon. In particular, peculiar temperature dependent redshift and excitation intensity dependent blueshift, which have been interpreted as the characteristics of 2DEG sub-levels in HEMT structures by other researchers, are understood by invoking the wavelength and temperature dependence of the refractive index of GaN within the framework of interference phenomenon. The results of other researchers are also consistently explained by considering the fine oscillatory features as the interference oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical investigation of effective permeability of dilute magnetic dielectrics with magnetic field

The prime objective of this paper is to investigate the magnetic nature of dilute magnetic dielectrics (DMD) under variation of external magnetic field. The said variation is studied over developed nano-sized Gadolinium Oxide as a DMD system. The observed experimental field variation of the effective magnetic permeability is analyzed results of optical experiment. The experiment records the variation of Brewster angle of incident polarized LASER beam from the surface of developed DMD specimen with applied out of plane external magnetic field. The effective refractive index and hence relative magnetic permeability were estimated following electro-magnetic theory. The overall results obtained and agreement between theory and experiment are good.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increase in the resolution of the method of surface nanostructuring by femtosecond-laser impact through a layer of colloidal microparticles

It is experimentally demonstrated that by converting a few percent of the fundamental frequency pulse energy into the second harmonic one can obtain surface structures using dielectric microspheres with the dimension of the order of the second harmonic wavelength. Structuring by means of the second harmonic solely requires a significantly greater energy density in the pulse than using bichromatic irradiation. It is impossible to obtain structures using only the fundamental frequency radiation pulses, because radiation at the fundamental frequency is not focused by the system of microspheres. Therefore, the use of bichromatic pulses allows an essential increase in the structure recording density. Theoretical calculations demonstrating the possibility of further improvement of the structure recording density by using nonspherical microlenses of a smaller size made of a material with a higher refractive index are presented. (extreme light fields and their applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparative study on the electronic and optical properties of Sb{sub 2}Se{sub 3} thin film

The thin film of Sb{sub 2}Se{sub 3} was deposited by thermal evaporation method and the film was annealed in N{sub 2} flow in a three zone furnace at a temperature of 290°С for 30 min. The structural properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (ТЕМ), X-ray diffraction (XRD) and Raman spectroscopy, respectively. It is seen that the as-deposited film is amorphous and the annealed film is polycrystalline in nature. The surface of Sb{sub 2}Se{sub 3} film is oxidized with a thickness of 1.15 nm investigated by X-ray photolecetron spectroscopy (XPS) measurement. Spectroscopic ellipsometry (SE) and UV–vis spectroscopy measurements were carried out to study the optical properties of Sb{sub 2}Se{sub 3} film. In addition, the first principles calculations were applied to study the electronic and optical properties of Sb{sub 2}Se{sub 3}. From the theoretical calculation it is seen that Sb{sub 2}Se{sub 3} is intrinsically an indirect band gap semiconductor. Importantly, the experimental band gap is in good agreement with the theoretical band gap. Furthermore, the experimental values of n, k, ε{sub 1}, and ε{sub 2} are much closer to the theoretical results. However, the obtained large dielectric constants and refractive index values suggest that exciton binding energy in Sb{sub 2}Se{sub 3} should be relatively small and an antireflective coating is recommended to enhance the light absorption of Sb{sub 2}Se{sub 3} for thin film solar cells application.

36 MATERIALS SCIENCE↗

Temperature sensibility of the birefringence properties in side-hole photonic crystal fiber filled with Indium

We report on the temperature sensitivity of the birefringence properties of a special kind of photonic crystal fiber containing two side holes filled with Indium metal. The modulation of the fiber birefringence is accomplished through the stress field induced by the expansion of the metal. Although the fiber was made at low gas pressures during the indium infiltration process, the birefringence showed anomalous property at a relatively low temperature value, which is completely different from those reported in conventional-like fibers with two holes filled with metal. By modeling the anisotropic changes induced by the metal expansion to the refractive index within the fiber, we are able to reproduce the experimental results. Our results have practical relevance for the design of devices based on this technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal diffusivity measurement by lock-in photothermal shadowgraph method

Here, we present a novel application of the shadowgraph technique for obtaining the thermal diffusivity of an opaque solid sample, inspired by the orthogonal skimming photothermal beam deflection technique. This new variant utilizes the shadow projected by the sample when put against a collimated light source. The sample is then heated periodically by another light beam, giving rise to thermal waves, which propagate across it and through its surroundings. Changes in the refractive index of the surrounding media due to the heating distort the shadow. This phenomenon is recorded and lock-in amplified in order to determine the sample's thermal diffusivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical stress on the surface of a particle: Homogeneous sphere

A rigorous solution (generalized Lorenz-Mie theory) and an approximate solution (geometrical optics) are developed for the optical stress distribution on the surface of a homogeneous sphere. Demonstration calculations are made for plane-wave and Gaussian-beam illuminations. The influence of diffracted waves, surface waves, interference effects, caustic points, beam width, and refractive index on the stress is analyzed. The Debye series is used to evaluate the validity of geometrical optics and provides a quantitative analysis of the contribution of rays of different orders.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear Landau-Zener tunneling in coupled waveguide arrays

The possibility of direct observation of the nonlinear Landau-Zener tunneling effect with a device consisting of two waveguide arrays connected to a tilted reduced refractive index barrier is discussed. Numerical simulations on this realistic setup are interpreted via a simplified double-well system and different asymmetric tunneling scenarios are predicted varying just the injected beam intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiative Transfer in a Translucent Cloud Illuminated by an Extended Background Source

We discuss the radiative transfer theory for translucent clouds illuminated by an extended background source. First, we derive a rigorous solution based on the assumption that multiple scatterings produce an isotropic flux. Then we derive a more manageable analytic approximation showing that it nicely matches the results of the rigorous approach. To validate our model, we compare our predictions with accurate laboratory measurements for various types of well-characterized grains, including purely dielectric and strongly absorbing materials representative of astronomical icy and metallic grains, respectively, finding excellent agreement without the need to add free parameters. We use our model to explore the behavior of an astrophysical cloud illuminated by a diffuse source with dust grains having parameters typical of the classic ISM grains of Draine and Lee and protoplanetary disks, with an application to the dark silhouette disk 114–426 in Orion Nebula. We find that the scattering term modifies the transmitted radiation, both in terms of intensity (extinction) and shape (reddening) of the spectral distribution. In particular, for small optical thickness, our results show that scattering makes reddening almost negligible at visible wavelengths. Once the optical thickness increases enough and the probability of scattering events becomes close to or larger than 1, reddening becomes present but is appreciably modified with respect to the standard expression for line-of-sight absorption. Moreover, variations of the grain refractive index, in particular the amount of absorption, also play an important role in changing the shape of the spectral transmission curve, with dielectric grains showing the minimum amount of reddening.

79 ASTRONOMY AND ASTROPHYSICS↗

Variations in dose distribution and optical properties of Gafchromic{sup TM} EBT2 film according to scanning mode

Purpose: The authors aim was to investigate the effects of using transmission and reflection scanning modes, the film orientation during scanning, and ambient room light on a dosimetry system based on the Gafchromic{sup TM} EBT2 film model. Methods: For calibration, the films were cut to 3 x 3 cm{sup 2} and irradiated from 20 to 700 cGy at the depth of maximum dose using 6 and 10 MV photon beams in a 10 x 10 cm{sup 2} field size. Absolute dose calibration of the linear accelerator was done according to the TRS398 protocol. An FG65-G ionization chamber was used to monitor the dose while irradiating the films in solid water. The film pieces were scanned with an EPSON Expression 1680 Pro flatbed scanner in transmission and reflection modes. Authors investigated the effect of orientation on films and examined the optical properties of EBT2 film using an ellipsometer and an ultraviolet (UV)/visible spectrometer to explain the dosimetric dependence of the film on orientation during the scanning process. To investigate the effect of ambient room light, films were preirradiated in 6 and 10 MV photon beams with intensity-modulated radiotherapy (IMRT) quality assurance (QA) plans, and then exposed to room light, either directly for 2 days in a workroom or for 2 months in a film box. Gamma index pass criteria of (3%, 3 mm) were used. Results: The dose response curves based on net optical density (NOD) indicated that the reflection scanning mode can provide a better dose sensitivity than the transmission scanning mode, whereas the standard deviation of the dose is greater in reflection mode than in transmission mode. When the film was rotated 90 deg. from the portrait orientation, the average dose of the EBT2 film decreased by 11.5-19.6% in transmission mode and by 1.5-2.3% in reflection mode. Using an ellipsometer, variation of the refractive index of EBT2 film--the birefringence property--was found to be the largest between 45 deg. (1.72 and 1.71) and 135 deg. (1.8 and 1.77) for 300 and 800 cGy. Absorption spectra of EBT2 films measured with spectrometer were the function of film orientation. The readings in reflection scanning mode were more stable against room light than those in transmission scanning mode, although dose readings increased in both modes after the films were exposed to room light. Conclusions: The transmission scanning mode exhibited a strong dependence on film orientation during scanning and a change in optical density resulting from room light exposure, so a constant scanning orientation and minimal exposure to light can reduce uncertainty in the measured dose (23 {+-} 3%). The angular dependence was analyzed using Jones matrices and optical properties of EBT2 film were obtained using an ellipsometer and an UV/visible spectrometer. The reflection scanning mode has relatively good stability with respect to room light and film orientation on a scanner, although the large standard deviation of dose is a disadvantage in measurements of absolute dose. Reflection scanning mode can offer a potential advantage for film dosimetry in radiotherapy, although transmission scanning mode is still recommended for dosimetry as it provides better uncertainty results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical Characteristics of Zinc Oxide Films on Glass Substrates

An algorithm is developed for solving the inverse problem of multiangular spectrophotometry of a layer on a planeparallel substrate of fi nite thickness using s- and p-polarized waves. It allows the dispersive properties of the layer and substrate to be studied both far from and in the vicinity of the resonant wavelengths. The dispersive properties of layers of pure and Al-doped ZnO on glass substrates are investigated using it. It is shown that doping shifts the absorption band maximum to shorter wavelength and decreases the refractive index of the material. The applicability limits of known approximate expressions for determining the spectral dependence of the absorption coeffi cient of a layer from spectrophotometric data are estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Q microsphere integrated with a tapered fiber suitable for biosensing applications

We propose a novel whispering gallery mode (WGM) microsphere resonator integrated with a tapered optical fiber. In the proposed structure, the surface of the silica microsphere is coated with a thin layer of Hafnia (Hafnium dioxide). The results from analytical and numerical simulations indicated that the WGMs can be efficiently excited with quality factors, Q, up to 1.9 × 10{sup 5} in a silica-coated microsphere with a diameter of 24.08 μm, coupled to a tapered silica fiber with 1 μm core radius. The sensitivity, S, and figure of merit, FOM, of the proposed structure were 69 nm/R.I.U (nanometers per refractive index unit) and 1.3 × 10{sup 7}, respectively. Integration of microspheres and coupling system with High-Q and Ultra-High-S can be used for various applications such as detection and biosensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Al-Si-N thin films deposited by laser ablation: Effect of plasma parameters on mechanical and optical properties

Highlights: • Al-Si-N thin films deposited by PLD showed a chemical composition of the films dependent on the silicon plasma density. • The change in the direct band gap of the samples was related to the Si content and the maximum was 5.54 eV for 20 at.% of Si. • Maximum hardness of 30.3 ± 1.5 GPa was obtained at 4 at.% Si. • The increase in the silicon content of Al-Si-N thin films promotes the formation of a-Si{sub 3}N{sub 4} matrix. - Abstract: Al-Si-N thin films were deposited using simultaneous laser ablation of silicon and aluminum targets in a nitrogen atmosphere at a substrate temperature of 200 °C. The silicon content of the films was studied as a function of the plasma parameters (mean ion kinetic energy and plasma density), produced by the ablation of the silicon target. The plasma parameters were measured by means of a planar Langmuir probe and optical emission spectroscopy. The chemical composition of the films was determined by X-ray photoelectron spectroscopy. The results showed a dependence between the silicon content and the silicon plasma density. Optical emission spectroscopy measurements showed that variations of the working pressure produced changes in the intensity of excited species (N{sub 2}{sup +}, Si{sup 2+}, Al{sup +} and Al{sup 0}), and in the incorporation of these elements into the films. For a working pressure of 0.6 Pa, hardness measurements gave a maximum of 30 ± 1.5 GPa for a silicon content of 4 at.%. The optical constants (refractive index and extinction coefficient) and direct band gap were evaluated as a function of the silicon content in the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increase of the grating coupler bandwidth with a graphene overlay

We present theoretical and experimental results that demonstrate an increase in the grating bandwidth by placing a graphene on the chip. A focusing subwavelength grating with coupling efficiency of −4.3 dB and 1 dB bandwidth of ∼60 nm was demonstrated. After a graphene sheet was transferred onto the chip, the maximum 1 dB bandwidth was increased to ∼72 nm. Experimental results are consistent with the calculated graphene induced waveguide refractive index and dispersion changes, and the bandwidth improvement may be attributed to the reduction of grating dispersion. This study may be of interest for graphene-on-silicon photonic integrated circuit applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A neutron scintillator based on transparent nanocrystalline CaF{sub 2}:Eu glass ceramic

There are no efficient Eu{sup 2+} doped glass neutron scintillators reported due to low doping concentrations of Eu{sup 2+} and the amorphous nature of the glass matrix. In this work, an efficient CaF{sub 2}:Eu glass ceramic neutron scintillator was prepared by forming CaF{sub 2}:Eu nanocrystals in a {sup 6}Li-containing glass matrix. Through appropriate thermal treatments, the scintillation light yield of the transparent glass ceramic was increased by a factor of at least 46 compared to the as-cast amorphous glass. This improvement was attributed to more efficient energy transfer from the CaF{sub 2} crystals to the Eu{sup 2+} emitting centers. Further light yield improvement is expected if the refractive index of the glass matrix can be matched to the CaF{sub 2} crystal.

36 MATERIALS SCIENCE↗

Investigation of optical properties of multilayer dielectric structures using prism-coupling technique

A method based on resonant excitation of waveguide modes with a prism coupler is proposed for measuring the thickness and refractive index of thin-film layers in multilayer dielectric structures. The peculiarities of reflection of TE- and TM-polarised light beams from a structure comprising eleven alternating layers of zinc sulfide (ZnS) and magnesium barium fluoride (MgBaF{sub 4}), whose thicknesses are much less than the wavelength of light, are investigated. Using the mathematical model developed, we have calculated the coefficients of reflection of collimated TE and TM light beams from a multilayer structure and determined the optical constants and thicknesses of the structure layers. The refractive indices of the layers, obtained for TE and TM polarisation of incident light, are in good agreement. The thicknesses of ZnS and MgBaF{sub 4} layers, found for different polarisations, coincide with an accuracy of ±1%. Thus, we have demonstrated for the first time that the prism-coupling technique allows one to determine the optical properties of thin-film structures when the number of layers in the structure exceeds ten layers. (integrated optics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermat's principle in quantum gravitational optics

Interactions incorporating the vacuum polarization effects in curved backgrounds modify the null cone structure in such a way that the photon trajectories would not be the space-time geodesics any longer. The gravitational birefringence introduced as a direct consequence of these effects will allow shifts in the photon velocities leading to polarization dependent superluminal propagation. Taking these effects into account, we study Fermat's principle in the context of the 1+3 (threading) formulation of the space-time decomposition. We find an expression for the modified space-time refractive index and show that it is proportional to the light cone correction to first order. Consequences of this modification for spatial light paths are considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗