Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electro-activated indigos intensify ampere-level CO 2 reduction to CO on silver catalysts

The electrochemical reduction of carbon dioxide (CO 2 ) to carbon monoxide (CO) is challenged by a selectivity decline at high current densities. Here we report a class of indigo-based molecular promoters with redox-active CO 2 binding sites to enhance the high-rate conversion of CO 2 to CO on silver (Ag) catalysts. Theoretical calculations and in situ spectroscopy analyses demonstrate that the synergistic effect at the interface of indigo-derived compounds and Ag nanoparticles could activate CO 2 molecules and accelerate the formation of key intermediates (*CO 2 – and *COOH) in the CO pathway. Indigo derivatives with electron-withdrawing groups further reduce the overpotential for CO production upon optimizing the interfacial CO 2 binding affinity. By integrating the molecular design of redox-active centres with the defect engineering of Ag structures, we achieve a Faradaic efficiency for CO exceeding 90% across a current density range of 0.10 − 1.20 A cm –2 . The Ag mass activity toward CO increases to 174 A mg –1 Ag . This work showcases that employing redox-active CO 2 sorbents as surface modification agents is a highly effective strategy to intensify the reactivity of electrochemical CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Molecular engineering of dispersed nickel phthalocyanines on carbon nanotubes for selective CO 2 reduction

Electrochemical reduction of CO 2 is a promising route for sustainable production of fuels. A grand challenge is developing low-cost and efficient electrocatalysts that can enable rapid conversion with high product selectivity. Here we design a series of nickel phthalocyanine molecules supported on carbon nanotubes as molecularly dispersed electrocatalysts (MDEs), achieving CO 2 reduction performances that are superior to aggregated molecular catalysts in terms of stability, activity and selectivity. The optimized MDE with methoxy group functionalization solves the stability issue of the original nickel phthalocyanine catalyst and catalyses the conversion of CO 2 to CO with >99.5% selectivity at high current densities of up to -300 mA cm -2 in a gas diffusion electrode device with stable operation at -150 mA cm -2 for 40 h. The well-defined active sites of MDEs also facilitate the in-depth mechanistic understandings from in situ/operando X-ray absorption spectroscopy and theoretical calculations on structural factors that affect electrocatalytic performance.

42 ENGINEERING↗
DOE OSTI2026

Rational design of high-performance low-loading oxygen reduction catalysts for alkaline fuel cells

The lack of mechanistic understanding and catalyst design principles for alkaline electrolytes, especially for the sluggish oxygen reduction reaction, has impeded the advancement of alkaline fuel cells. Here, in this study, we propose a modified volcano plot and apply this rationale to strategically design Pt nanosheets with PdH x nanosheets substrates. This catalyst exhibited high stability with a specific activity of 1.71 mA cm −2 at 0.95 V versus the reversible hydrogen electrode, surpassing the benchmark of Pt/C by 49-fold. Spectroscopic, electrochemical and electron microscopic characterizations revealed that such performance enhancement originated from tensile-strained Pt{111} facets, improving oxidative stability and suppressing carbon corrosion. In fuel cell testing, the catalyst enabled a peak power density of 1.67 W cm −2 with a loading of 10 µg PGM Cathode cm −2 . Further optimization delivered a peak power density of 21.7 W mg −1 PGM Cathode+Anode with a total specific catalyst cost US$\$$1.27 kW −1 , surpassing the US Department of Energy’s Pt group metal loading and cost targets. This study provides valuable insights into catalyst design for the alkaline oxygen reduction reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A fundamental look at electrocatalytic sulfur reduction reaction

The fundamental kinetics of the electrocatalytic sulfur reduction reaction (SRR), a complex 16-electron conversion process in lithium–sulfur batteries, is so far insufficiently explored. In this study, by directly profiling the activation energies in the multistep SRR, we reveal that the initial reduction of sulfur to the soluble polysulfides is relatively easy owing to the low activation energy, whereas the subsequent conversion of the polysulfides into the insoluble Li 2 S 2 /Li 2 S has a much higher activation energy, contributing to the accumulation of polysulfides and exacerbating the polysulfide shuttling effect. We use heteroatom-doped graphene as a model system to explore electrocatalytic SRR. We show that nitrogen and sulfur dual-doped graphene considerably reduces the activation energy to improve SRR kinetics. Density functional calculations confirm that the doping tunes the p-band centre of the active carbons for an optimal adsorption strength of intermediates and electroactivity. This study establishes electrocatalysis as a promising pathway to tackle the fundamental challenges facing lithium–sulfur batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly selective and productive reduction of carbon dioxide to multicarbon products via in situ CO management using segmented tandem electrodes

Electrochemical CO 2 reduction provides a promising route to the sustainable generation of valuable chemicals and fuels. Tandem catalysts enable sequential CO 2 -to-CO and CO-to-multicarbon (C 2+ ) product conversions on complementary active sites, to produce high C 2+ Faradaic efficiency (FE). Unfortunately, previous tandem catalysts exhibit poor management of CO intermediates, which diminishes C 2+ FE. Here, we design segmented gas-diffusion electrodes (s-GDEs) in which a CO-selective catalyst layer (CL) segment at the inlet prolongs CO residence time in the subsequent C 2+ -selective segment, enhancing conversion. This phenomenon enables increases in both the CO utilization and C 2+ current density for a Cu/Ag s-GDE compared to pure Cu, by increasing the *CO coverage within the Cu CL. Lastly, we develop a Cu/Fe-N-C s-GDE with 90% C 2+ FE at C 2+ partial current density (j C2+ ) exceeding 1 A cm -2 . These results prove the importance of transport and establish design principles to improve C 2+ FE and j C2+ in tandem CO 2 reduction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Atomic-scale identification of active sites of oxygen reduction nanocatalysts

Heterogeneous nanocatalysts play a crucial role in both the chemical and energy industries. Despite substantial advancements in theoretical, computational and experimental studies, identifying their active sites remains a major challenge. Here we utilize atomic electron tomography to determine the three-dimensional atomic structure of PtNi and Mo-doped PtNi nanocatalysts for the electrochemical oxygen reduction reaction. We then employ the experimental atomic structures as input to first-principles-trained machine learning to identify the active sites of the nanocatalysts. Through the analysis of the structure–activity relationships, we formulate an equation termed the local environment descriptor, which balances the strain and ligand effects to provide physical and chemical insights into active sites in the oxygen reduction reaction. The ability to determine the three-dimensional atomic structure and chemical composition of realistic nanoparticles, combined with machine learning, could transform our fundamental understanding of the active sites of catalysts and guide the rational design of optimal nanocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A red-light-powered silicon nanowire biophotochemical diode for simultaneous CO 2 reduction and glycerol valorization

A bias-free photochemical diode, in which a p-type photocathode is connected to an n-type photoanode to harness light for driving photoelectrochemical reduction and oxidation pairs, serves as a platform for realizing light-driven fuel generation from CO 2 . However, the conventional design, in which cathodic CO 2 reduction is coupled with the anodic oxygen evolution reaction (OER), requires substantial energy input. Here we present a photochemical diode device that harnesses red light (740 nm) to simultaneously drive biophotocathodic CO 2 -to-multicarbon conversion and photoanodic glycerol oxidation as an alternative to the OER to overcome the above thermodynamic limitation. The device consists of an efficient CO 2 -fixing microorganism, Sporomusa ovata, interfaced with a silicon nanowire photocathode and a Pt–Au-loaded silicon nanowire photoanode. This photochemical diode operates bias-free under low-intensity (20 mW cm –2 ) red light irradiation with ~80% Faradaic efficiency for both the cathodic and anodic products. Finally, this work provides an alternative photosynthetic route to mitigate excessive CO 2 emissions and efficiently generate value-added chemicals from CO 2 and glycerol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Regulating in situ gaseous deposition to construct highly durable Fe–N–C oxygen-reduction fuel cell catalysts

The activity–stability trade-off challenges the design of high-performance atomically dispersed iron–nitrogen–carbon (Fe–N–C) catalysts for the acidic oxygen reduction reaction in polymer electrolyte fuel cells. Here we develop an in situ chemical vapour deposition approach during catalyst synthesis to break the trade-off, producing highly stable Fe–N–C catalysts while maintaining adequate oxygen reduction reaction activity. The optimal catalyst exhibits a half-wave potential of 0.867 V, remaining unchanged after an accelerated stress test (AST) of 100,000 potential cycles in rotating disk electrode tests. In membrane electrode assemblies under H 2 –air conditions, it delivers 93 mA cm −2 at 0.8 V after a standard AST of 30,000 voltage cycles, and shows minimal current density losses (2.9% at 0.6 V; 14.2% at 0.7 V) after an extended AST up to 120,000 cycles. Furthermore, the catalyst’s durability improvement is primarily due to the in situ chemical vapour deposition, which strengthens Fe–N bonds, increases active-site density, mitigates iron aggregates and reduces surface porosity.

Chemical engineering↗
DOE OSTI2024

Upgrading carbon monoxide to bioplastics via integrated electrochemical reduction and biosynthesis

It is challenging to obtain high-value hydrocarbons that are longer than C 3 via electrochemical CO 2 /CO reduction. Integrating electrochemical CO 2 /CO electrolysers with a downstream bioreactor is one solution for obtaining high-value long-chain products, but the electrolytes in these two systems are mismatched, preventing smooth integration. Furthermore we demonstrate a porous solid electrolyte reactor that produces highly selective and electrolyte-free acetate and couple it with a biosynthesis system for generating C 4+ polyhydroxybutyrate bioplastic. A finely tuned electrolyte containing biocompatible salt medium with acetate can be directly injected into the downstream bioreactor without any separation or salt-mixing processes. In the optimized coupled platform, Ralstonia eutropha bacteria can grow with acetate generated from the CO electrocatalytic reduction reactor, and produce bioplastic as the final value-added product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Understanding three-dimensionally interconnected porous oxide-derived copper electrocatalyst for selective carbon dioxide reduction

In this study, we have investigated a hierarchical CuO-derived inverse opal (CuO-IO) catalyst with high CO selectivity up to 80–90% and minimal H 2 evolution at moderate potentials for CO 2 electroreduction. The three-dimensionally (3D) structured, porous catalyst was composed of small CuO nanoparticles and exhibited a peak CO faradaic efficiency (FE) of 72.5% (±1.8), complete suppression of H 2 formation, and good stability over 24 hours operation at –0.6 V versus the reversible hydrogen electrode (RHE). In situ Raman, X-ray absorption spectroscopy and X-ray diffraction measurements indicated reduction of the catalyst into metallic Cu0 oxidation state with dominant Cu(111) orientation under electrocatalytic conditions. We suggest that rapid depletion of CO 2 and protons at the highly roughened catalyst surface likely increased the local pH during the electrolysis. The combination of C 1 favoring Cu(111) surfaces and reduced local proton/CO 2 availability facilitated selective conversion of CO 2 into CO and reduced H 2 and C 2 products. Our work provides additional understanding of the structure–property relationships of 3D porous electrocatalysts for CO 2 reduction applications by evaluating the crystallographic orientation, oxidation state, and crystallite size of a CO-selective CuO-IO catalyst under realistic working conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrocatalytic CO 2 reduction on earth abundant 2D Mo 2 C and Ti 3 C 2 MXenes

Mo 2 C and Ti 3 C 2 MXenes were investigated as earth-abundant electrocatalyts for the CO 2 reduction reaction (CO 2 RR). Mo 2 C and Ti 3 C 2 exhibited faradaic efficiencies of 90% (250 mV overpotential) and 65% (650 mV overpotential), respectively, for the reduction of CO 2 to CO in acetonitrile using an ionic liquid electrolyte. The use of ionic liquid 1-ethyl-2-methylimidazolium tetrafluoroborate as an electrolyte in organic solvent suppressed the competing hydrogen evolution reaction. Density functional theory (DFT) calculations suggested that the catalytic active sites are oxygen vacancy sites on both MXene surfaces. Also, a spontaneous dissociation of adsorbed COOH species to a water molecule and adsorbed CO on Mo 2 C promote the CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quasi-operando quantification of Cu(ii) ions in Cu-SSZ-13 catalyst by an NH 3 temperature-programmed reduction method

In this work, a quasi-operando NH3 temperature-programmed reduction method (NH 3 -TPR), with N 2 :Cu = 1:1, is developed to quantify total Cu(II) ions in Cu-SSZ-13 quenched from SCR-relevant reactions, and its accuracy is confirmed by in situ EPR. [Cu(OH)] + -Z and Cu 2+ -2Z can be further distinguished by NH 3 reduction temperatures, and their different reducibility in SCR is revealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exploring the kinetics of actinyl–EDTA reduction by ferrous iron using quantum-mechanical calculations

Here, the reduction of An(VI) (An = U, Np, and Pu) to An(IV) significantly decreases its solubility and mobility. This reaction can be hindered by complexation with inorganic (e.g., carbonate) or organic ligands. Ethylenediaminetetraacetic acid (EDTA) is one such organic ligand that forms stable complexes with actinides. Therefore, it may enhance the mobility of actinides. However, the redox kinetics and mechanisms of actinyl (An(V/VI)O 2 +/2+ )–EDTA are not well characterized yet and are thus studied here using quantum-mechanical calculations. The principle is to approach the actinyl–EDTA and Fe 2+ (reductant) in small incremental steps and calculate the system energy at each distance. The overall reaction is then delineated into sub-processes (encounter frequency in bulk solution, formation of outer-sphere complex, transition from outer- to inner-sphere complex, and electron transfer), and reaction rates are determined for each sub-process. The formation of outer-sphere complexes occurs rapidly in microseconds to seconds over a wide range of actinyl concentrations (pM to μM); in contrast, the transition to the inner-sphere complex is relatively slow (milliseconds to a few seconds). Immediate electron transfer to form the pentavalent actinide is observed along the reaction path for Np(VI) and Pu(VI), but not for U(VI). Surprisingly, in acidic conditions, one of the carboxylic groups gets protonated in EDTA of [UO 2 (edta)] 2- rather than one of the amino groups. This process-based series of calculations can be applied to any redox reaction and allows the prediction of changes to the rate law and rate-limiting step in a more fundamental way for different environments

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Codesign of an integrated metal–insulator–semiconductor photocathode for photoelectrochemical reduction of CO 2 to ethylene

Photoelectrochemical carbon-dioxide reduction (PEC CO 2 R) is a potentially attractive means for producing chemicals and fuels using sunlight, water, and carbon dioxide; however, this technology is in its infancy. To date, most studies of PEC CO 2 R have reported products containing one carbon atom (C 1 products) but the production of valuable products containing two or more carbons (C 2+ products), such as ethylene, ethanol, etc., is rarely demonstrated. Metal–semiconductor–insulator (MIS) photocathode/catalyst structures offer a promising approach for this purpose, since they integrate the functions of light absorption, charge separation, and catalysis. In this study, we have investigated a Cu/TiO 2 /p-Si photocathode/catalyst structure with the aim of establishing the effects of semiconductor–insulator interactions on the performance of the photocathode and the influence of the direction of illumination of the MIS structure on the total current density and the distribution of products formed by on the Cu catalyst. Here, we have also examined the influence of ionomer coatings deposited on the Cu surface on the total current density and the distribution of products formed. A major finding is that for a fixed Cu potential the distribution of products formed by PEC CO 2 R are the same, irrespective of the direction of illumination, and are identical to those obtained by electrochemical reduction of CO 2 (EC CO 2 R). Another important finding is that the total current density and the faradaic efficiency to ethylene are enhanced significantly by deposition of a thin bilayer of Sustainion/Nafion onto the surface of the Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrodeposited Sn–Cu@Sn dendrites for selective electrochemical CO 2 reduction to formic acid

Large-scale CO 2 electrolysis can be applied to store renewable energy in chemicals. Recent developments in gas diffusion electrodes now enable a commercially relevant current density. However, the low selectivity of the CO 2 reduction reaction (CO 2 RR) still hinders practical applications. The selectivity of the CO 2 RR highly depends on the electrocatalyst. Sn catalysts are considered promising cathode materials for the production of formic acid. The selectivity of Sn catalysts can be regulated by controlling their morphology or alloying them with secondary metals. In this work, we enhanced the selectivity of CO 2 reduction to formic acid by synthesizing Sn–Cu@Sn dendrites that have a core@shell architecture. The Sn–Cu@Sn dendrites were prepared by a scalable electro-deposition method. The electronic structure was modified to suppress a reaction pathway for CO production on the Sn surface. Notably, the Sn shell inhibited the cathodic corrosion of Cu during the CO 2 RR. On a gas diffusion electrode, the Sn–Cu@Sn dendrites exhibited 84.2% faraday efficiency to formic acid for 120 h with high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the evolution of double perovskite band structure upon dimensional reduction

Recent investigations into the effects of dimensional reduction on halide double perovskites have revealed an intriguing change in band structure when the three-dimensional (3D) perovskite is reduced to a two-dimensional (2D) perovskite with inorganic sheets of monolayer thickness (n = 1). The indirect bandgap of 3D Cs 2 AgBiBr 6 becomes direct in the n = 1 perovskite whereas the direct bandgap of 3D Cs 2 AgTlBr 6 becomes indirect at the n = 1 limit. Here, we apply a linear combination of atomic orbitals approach to uncover the orbital basis for this bandgap symmetry transition with dimensional reduction. We adapt our previously established method for predicting band structures of 3D double perovskites for application to their 2D congeners, emphasizing new considerations required for the 2D lattice. In particular, we consider the inequivalence of the terminal and bridging halides and the consequences of applying translational symmetry only along two dimensions. The valence and conduction bands of the layered perovskites can be derived from symmetry adapted linear combinations of halide p orbitals propagated across the 2D lattice. The dispersion of each band is then determined by the bonding and antibonding interactions of the metal and halide orbitals, thus affording predictions of the essential features of the band structure. We demonstrate this analysis for 2D Ag–Bi and Ag–Tl perovskites with sheets of mono- and bilayer thickness, establishing a detailed understanding of their band structures, which enables us to identify the key factors that drive the bandgap symmetry transitions observed at the n = 1 limit. Importantly, these insights also allow us to make the general prediction that direct → indirect or indirect → direct bandgap transitions in the monolayer limit are most likely in double perovskite compositions that involve participation of metal d orbitals at the band edges or that have no metal-orbital contributions to the valence band, laying the groundwork for the targeted realization of this phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗