Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Neutronics analysis of an open-cycle high-impulse gas core reactor concept

A procedure was developed to calculate the critical fuel mass, including the effects of propellant pressure, for coaxial-flow gas-core reactors operating at 196,600 newtons thrust and 4400 seconds specific impulse. Data were generated for a range of cavity diameter, reflector-moderator thickness, and quantity of structural material. Also presented are such core characteristics as upper limits on cavity pressure, spectral hardening in very-high-temperature hydrogen, and reactivity coefficients.

Whitmarsh, C. L., Jr.↗
NASA NTRS1972

Resonance-inert stabilization for space stations

An approach to stabilizing control systems is presented which structures controllers like passive mechanical systems. The controller is visualized as a structural part with a passive behavior similar to springs, dashpots, and masses. If such a controller is connected by a proper feedback arrangement, then a passive mechanical plant cannot upset stability, regardless of masses, resonances, and three-dimensional coupling. The concept of resonance-inert stabilization is explained by structuring the controller of a simple feedback loop. Reactive functions, connections, and matrices are defined and used in the stabilization concept. The realization of a possible Skylab control system is discussed and compared with the present design. This example demonstrates the applicability to three-dimensional problems with lagging controllers.

Vonpragenau, G. L.↗
NASA NTRS1972

Development of a sorber trace contaminant control system including pre- and post-sorbers for a catalytic oxidizer

A general methodology was developed for spacecraft contaminant control system design. Elements considered for contaminant control were catalytic oxidation with isotope or electrical heat and pre- and post-sorbers, charcoal with regeneration and non-regeneration, and reactive constituents. A technique is described for sizing a charcoal bed for a multiple contaminant load.

Olcott, T. M.↗
NASA NTRS1972

Material Compatibility with Space Storable Propellants. Design Guidebook

An important consideration in the design of spacecraft for interplanetary missions is the compatibility of storage materials with the propellants. Serious problems can arise because many propellants are either extremely reactive or subject to catalytic decomposition, making the selection of proper materials of construction for propellant containment and control a critical requirement for the long-life applications. To aid in selecting materials and designing and evaluating various propulsion subsystems, available information on the compatibility of spacecraft materials with propellants of interest was compiled from literature searches and personal contacts. The compatibility of both metals and nonmetals with hydrazine, monomethyl hydrazine, nitrated hydrazine, and diborance fuels and nitrogen tetroxide, fluorine, oxygen difluoride, and Flox oxidizers was surveyed. These fuels and oxidizers encompass the wide variety of problems encountered in propellant storage. As such, they present worst case situations of the propellant affecting the material and the material affecting the propellant. This includes material attack, propellant decomposition, and the formation of clogging materials.

Uney, P. E.↗
NASA NTRS1972

The composition of the upper atmosphere

Miniature mass spectrometers were developed and were carried on sounding rockets to determine the composition of the upper atmosphere. Techniques have been developed that accurately correct for the velocity and spin of the moving vehicle. Above 120 km N2, O2, and Ar appear to be in diffusive equilibrium. Most He concentration measurements show a more rapid decline with altitude than predicted by diffusive equilibrium. Because of the highly reactive nature of atomic oxygen, measurements of this species by mass spectrometry are low by an unknown factor.

Nier, A. O.↗
NASA NTRS1972

Experimental physics characteristics of a heavy-metal-reflected fast-spectrum critical assembly

A zero-power critical assembly was designed, constructed, and operated for the purpose of conducting a series of benchmark experiments dealing with the physics characteristics of a UN-fueled, Li-cooled, Mo-reflected, drum-controlled compact fast reactor for use with a space-power electric conversion system. The range of the previous experimental investigations has been expanded to include the reactivity effects of:(1) surrounding the reactor with 15.24 cm (6 in.) of polyethylene, (2) reducing the heights of a portion of the upper and lower axial reflectors by factors of 2 and 4, (3) adding 45 kg of W to the core uniformly in two steps, (4) adding 9.54 kg of Ta to the core uniformly, and (5) inserting 2.3 kg of polyethylene into the core proper and determining the effect of a Ta addition on the polyethylene worth.

Heneveld, W. H.↗
NASA NTRS1972

Hodographic approach to predicting inelastic strain at high temperature

An experimental study of the effect of continuous and discontinuous changes in strain rate on the relationship among strain rate, strain, and stress is described. Data from Udimet 700 in tension at 925 C were used in order to relate cyclic tensile creep to the monotonic properties of the material by means of the hodograph. The nature of modifications caused to the hodograph by discontinuous variation of the strain rate was determined from tests. Reloading at discontinuous strain rate caused reactivation of primary creep. A simple method, based on monotonic material properties, is proposed for predicting cyclic tensile creep response. Preliminary results of cyclic tests agree with predicted response.

Berkovits, A.↗
NASA NTRS1971

Shock tube technique for measuring opacities at high pressures for gaseous-core nuclear rockets.

A new method of opacity determination is described that uses an improved shock tube design and is applicable to measurements of Planck and Rosseland mean opacities in hydrogen or seeded hydrogen at hydrogen partial pressures of 500 atm, at temperatures from 2300 to 8000 K. The selection of seed materials to be added to the gases to make them semiopaque is discussed. Currently favored seeds are silicon and carbon or graphite for reactive seeds, and depleted uranium and tungsten 184 for nonreactive seeds.

Patch, R. W.↗
NASA NTRS1971

Flow and criticality in the open cycle gas core.

A series of flowing gas experiments using air, argon, and freon has been conducted in Idaho. The purpose is to study methods of obtaining flow patterns which would create maximum possible system reactivity consistent with an acceptably low uranium to coolant-gas loss ratio. These have been conducted on both ?two-dimensional' and truly three-dimensional spherical configurations of diameters 18 to 42 inches. The larger diameter is that proposed for a minimum cost flowing gas critical experiment, and the size extremes make extrapolations to the large 6 and 8 foot diameter configurations more reliable. Results show that large enough inner gas (fuel) volume fractions can be achieved to attain criticality.

Kunze, J. F.↗
NASA NTRS1971

Parathyroid hormone - Secretion and metabolism in vivo.

Gel filtration and radioimmunoassay were used to determine the molecular size and immunochemical reactivity of parathyroid hormone present in gland extracts, in the general peripheral circulation, and in parathyroid effluent blood from patients with hyperparathyroidism, as well as from calves and from cattle. It was found that parathyroid hormone secreted from the parathyroids in man and cattle is at least as large as the molecule extracted from normal bovine glands. However, once secreted into the circulation the hormone is cleaved, and one or more fragments, immunologically, dissimilar to the originally secreted hormone, constitute the dominant form of circulating immunoreactive hormone.

Habener, J. F.↗
NASA NTRS1971

Superconducting properties as a function of thickness in NbN films.

Measurement of the superconducting properties of NbN films prepared by a high purity reactive sputtering process. The transition temperature was found to decrease with decreasing film thickness, while in contrast the critical current vs magnetic field was largely independent of film thickness and even slightly increased when the film thickness went down to 100 A. The average resistivity of the NbN films was 1000 microohm-cm.

Gavaler, J. R.↗
NASA NTRS1972

The chemistry of neutral species in the D and E regions.

The photodissociation of molecular species such as oxygen, nitrogen, and water vapor in the upper atmosphere leads to the formation of a reservoir of chemical energy consisting of highly reactive atomic gases. The reactions of these with each other, and with the rest of the atmosphere, give a complex neutral chemistry involving many species and reactions. Local equilibrium can rarely be assumed for these reactions; transport by the horizontal and vertical mean flow, by eddy diffusion, and by molecular diffusion has quite different effects on the various constituents, depending on the time constants. The entire subject of the neutral chemistry in the D and E regions (between 50 and 160 km altitude) is reviewed, and related to existing experimental results. Needs for further research on the subject are indicated.

Bowhill, S. A.↗
NASA NTRS1972

Measurements on A-15 films.

Description of a method for the preparation of A-15 superconducting films by cosputtering. This method is useful for the study of both alloying effects and crystal structure stability determinations. Measurements in the A-15 systems Nb3Al, Nb3Al sub .75 Ge sub .25, and V3Si prepared by this method are presented. In addition a new method for the preparation of V3Si by 'reactive diffusion' is presented.

Cadieu, F. J.↗
NASA NTRS1972

Molecular beams in chemistry.

The molecular-beam technique is a means for producing isolated atoms or molecules within a narrow range of speed and solid angle. The phenomena studied with molecular beams can be classified as single-particle interactions, many-particle interactions, and two particle-interactions. The results of scattering experiments fall into two categories including collisions that do not result in atomic rearrangements and collisions that do. Experimental methods are discussed, giving attention to low-energy beams, high-energy beams, and intermediate-energy beams. Examples are presented to illustrate the information that can be obtained from elastic, inelastic, and reactive scattering.

Jordan, J. E.↗
NASA NTRS1972

Guinea pig ductus arteriosus. II - Irreversible closure after birth.

To investigate the mechanism underlying irreversibility of ductal closure after birth, studies were undertaken to determine the exact time course for the onset of irreversible closure of the guinea pig ductus arteriosus. Parallel studies of the reactivity of ductal smooth muscle to oxygen and studies of the postpartum cellular changes within the vessel were also carried out.

Fay, F. S.↗
NASA NTRS1972

Evaluation of Jacobian determinants by Monte Carlo methods - Application to the quasiclassical approximation in molecular scattering.

Sampling techniques have been used previously to evaluate Jacobian determinants that occur in classical mechanical descriptions of molecular scattering. These determinants also occur in the quasiclassical approximation. A new technique is described which can be used to evaluate Jacobian determinants which occur in either description. This method is expected to be valuable in the study of reactive scattering using the quasiclassical approximation.

La Budde, R. A.↗
NASA NTRS1971

A comparison of closed loop thermionic reactor control schemes.

The dynamics of the constant-voltage and constant-emitter-temperature control schemes are described. The closed loop responses to load changes, converter failures and reactivity perturbations are shown. Both control schemes inherently allow load voltages to vary during transients. An alternative control scheme is proposed which allows constant load voltage while preserving constant emitter temperatures.

Sawyer, C. D.↗