Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Experimental and theoretical insight into the soot tendencies of the methylcyclohexene isomers

The formation of soot precursors during combustion of three positional isomers of methylcyclohexene was investigated in flow reactor experiments and through density functional theory simulations. As evidenced by a recently published structure-property model, the sooting tendencies of these compounds differ from those of structurally similar molecules - suggesting new or unusual reaction chemistry. It was demonstrated that 1-methyl-1-cyclohexene and 4-methyl-1-cyclohexene preferentially react via a retro-Diels-Alder pathway leading to ring opening and molecular weight reduction. 3-methyl-1-cyclohexene, which exhibits much higher yield sooting index, preferentially reacts via dehydrogenation to cyclohexadienes and toluene - consistent with higher soot formation. It was demonstrated that the relative stability of the first radical intermediate plays a considerable role in determining the branching ratio between formation of soot precursors and ring opened retro-Diels-Alder reaction products. This study underscores the importance that small structural features can have in determining the ultimate fate of carbon during combustion processes.

09 BIOMASS FUELS↗

Effects of dilution and pressure on combustion characteristics within externally heated micro-tubes

Here this study investigates the impact of pressure and dilution on combustion behavior of of C 2H6/air/N2 mixtures within an externally heated micro-tube using both experimental and analytical techniques. Experiments are conducted for pressures up to 10 bar at multiple dilution levels and document three flame regimes, i.e. weak flames, FREI and normal flames. Characteristic temperatures for flame stabilization, as well as and ignition and extinction are obtained by applying a novel thin filament pyrometry method (TFP), which uses a thin silicon carbide (SiC) filament that enables temperature measurements for both reacting and non-reacting cases. Results show a decrease of characteristic temperatures with increasing pressure, which can be which can be partially compensated by a decrease of O2 content. Further, regime transitions occur at lower velocity as the pressure increases, whereas weak flame positions are insensitive to dilution at a given pressure. Predictions from the analytical model compare favorably with experimental results. The most prominent finding is that as dilution increases, the transition from weak flame to FREI becomes less abrupt and is completely lost for high dilution levels (i.e. low O2 content). Both experimental and analytical results indicate that the unstable FREI combustion regime does not exist at high dilution levels, i.e. weak flame and normal flame regimes are no longer clearly separated. As FREI are interpreted as a cyclic transition from an ignition zone to a propagating flame, results for highly diluted conditions are interpreted as a combustion regime where classical flame propagation ceases to exist.

42 ENGINEERING↗

Bay capping via acetylene addition to polycyclic aromatic hydrocarbons: Mechanism and kinetics

The bay-capping mechanism on PAH armchair edges and the kinetics of acetylene addition to 6–6–5 and 5–6–5 bays have been explored by ab initio/RRKM-ME calculations. The bays on the edges were modeled by C 21 H 11 and C 20 H 9 radicals produced by H abstractions from 7H-benzo[c]cyclopenta[e]pyrene and dicyclopenta[cf]pyrene. The C 20 H 9 + C 2 H 2 reaction is shown to have a low entrance barrier and to rapidly form the capped product, indaceno[2,1,8,7-cdefg]pyrene, along with ethynyl substituted dicyclopenta[cf]pyrene at temperatures above 1400 K. The reactivity of C 21 H 11 is shown to be governed by the location of the unpaired electron; the π radical R1 formed by H abstraction from the CH 2 group in 7H-benzo[c]cyclopenta[e]pyrene reacts with C 2 H 2 very slowly owing to a high entrance barrier, with the bay-capping rate constant approaching 10 -16 cm 3 molecule -1 s -1 only at temperatures above 2000K. Further, this result reaffirms that the growth of π aryl radicals via acetylene addition is inefficient and reflects the generally low reactivity of such radicals where the spin density is highly delocalized over the entire polyaromatic system. Alternatively, the σ C 21 H 11 radical R2 produced by H abstraction from the five-membered ring at the bay rapidly reacts with C 2 H 2 forming the bay-capped product, with the rate constant on the order of 10 -12 cm 3 molecule -1 s -1 at T≥1500K. Rate constants for the capping reactions at the 6–6–5 and 5–6–5 bays are compared with those at the 6–0–6, 6–6–6, and 6–5–6 bays. The site-specific bay-capping rate constants have been utilized in kMC simulations of the PAH growth and the results showed measurable differences when the 6–6–5 and 5–6–5 bay-capping reactions are taken into account, including an increase of the growth rate and the formation of closed-shell PAH and a rise of the number of embedded five-membered rings accompanied with a slight decrease of their overall amount.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO2 Hydrogenation to Formic Acid on Ni(110)

Hydrogen (H) in the subsurface of transition-metal surfaces exhibits unique reactivity for heterogeneously catalyzed hydrogenation reactions. Here, we explore the potential of subsurface H for hydrogenating carbon dioxide (CO2) on Ni(110). The energetics of surface and subsurface H reacting with surface CO2 to form formate, carboxyl, and formic acid on Ni(110) is systematically studied using self-consistent, spin-polarized, periodic density functional theory (DFT-GGA-PW91) calculations. We show that on Ni(110), CO2 can be hydrogenated to formate by surface H. However, further hydrogenation of formate to formic acid by surface H is hindered by a larger activation energy barrier. The relative energetics of hydrogenation barriers is reversed for the carboxyl-mediated route to formic acid.We suggest that the energetics of subsurface H emerging to the surface is suitable for providing the extra energy needed to overcome the barrier to formate hydrogenation. CO2 hydrogenation to formic acid could take place on Ni(110) when subsurface H is available to react with CO2. Additional electronic-structure based dynamic calculations would be needed to elucidate the detailed reaction paths for these transformations.

Environmental Molecular Sciences Laboratory↗

Temperature-programmed desorption study of NO reactions on rutile TiO2(110)-1×1

Systematic temperature-programmed desorption (TPD) studies of NO adsorption and reactions on rutile TiO2(110)-1×1 surface reveal several distinct reaction channels in a temperature range of 50 – 500 K. NO readily reacts on TiO2(110) to form N2O which desorbs between 50 and 200 K (LT N2O channels), which leaves the TiO2 surface populated with adsorbed oxygen atoms (Oa) as a byproduct of N2O formation. In addition, we observe simultaneous desorption peaks of NO and N2O at 270 K (HT1 N2O) and 400 K (HT2 N2O), respectively, both of which are attributed to reaction-limited processes. No N-derived reaction product desorbs from TiO2(110) surface above 500 K or higher, while the surface may be populated with Oa’s and oxidized products such as NO2 and NO3. The adsorbate-free TiO2 surface with oxygen vacancies can be regenerated by prolonged annealing at 850 K or higher. Detailed analysis of the three N2O desorption yields reveals that the surface species for the HT channels are likely to be various forms of NO dimers.

Environmental Molecular Sciences Laboratory↗

Inhibition of recombinant human carboxylesterase 1 and 2 and monoacylglycerol lipase by chlorpyrifos oxon, paraoxon and methyl paraoxon

Oxons are the bioactivated metabolites of organophosphorus insecticides formed via cytochrome P450 monooxygenase-catalyzed desulfuration of the parent compound. Oxons react covalently with the active site serine residue of serine hydrolases, thereby inactivating the enzyme. A number of serine hydrolases other than acetylcholinesterase, the canonical target of oxons, have been reported to react with and be inhibited by oxons. These off-target serine hydrolases include carboxylesterase 1 (CES1), CES2, and monoacylglycerol lipase. Carboxylesterases (CES, EC 3.1.1.1) metabolize a number of xenobiotic and endobiotic compounds containing ester, amide, and thioester bonds and are important in the metabolism of many pharmaceuticals. Monoglyceride lipase (MGL, EC 3.1.1.23) hydrolyzes monoglycerides including the endocannabinoid, 2-arachidonoylglycerol (2-AG). The physiological consequences and toxicity related to the inhibition of off-target serine hydrolases by oxons due to chronic, low level environmental exposures are poorly understood. Here, we determined the potency of inhibition (IC{sub 50} values; 15 min preincubation, enzyme and inhibitor) of recombinant CES1, CES2, and MGL by chlorpyrifos oxon, paraoxon and methyl paraoxon. The order of potency for these three oxons with CES1, CES2, and MGL was chlorpyrifos oxon > paraoxon > methyl paraoxon, although the difference in potency for chlorpyrifos oxon with CES1 and CES2 did not reach statistical significance. We also determined the bimolecular rate constants (k{sub inact}/K{sub I}) for the covalent reaction of chlorpyrifos oxon, paraoxon and methyl paraoxon with CES1 and CES2. Consistent with the results for the IC{sub 50} values, the order of reactivity for each of the three oxons with CES1 and CES2 was chlorpyrifos oxon > paraoxon > methyl paraoxon. The bimolecular rate constant for the reaction of chlorpyrifos oxon with MGL was also determined and was less than the values determined for chlorpyrifos oxon with CES1 and CES2 respectively. Together, the results define the kinetics of inhibition of three important hydrolytic enzymes by activated metabolites of widely used agrochemicals. -- Highlights: ► IC{sub 50} values and bimolecular rate constants (k{sub inact}/K{sub I}) of human recombinant CES1, CES2, and MGL proteins and chlorpyrifos oxon, paraoxon and methyl paraoxon were determined. ► The IC{sub 50} values for the oxons with CES1, CES2, and MGL followed the rank order: chlorpyrifos oxon > paraoxon > methyl paraoxon. ► The order of reactivity for the oxons with CES1 and CES2 was chlorpyrifos oxon > paraoxon > methyl paraoxon. ► Chlorpyrifos oxon was less reactive with MGL than with either CES1 or CES2.

60 APPLIED LIFE SCIENCES↗

Flavin-containing monooxygenase S-oxygenation of a series of thioureas and thiones

Mammalian flavin-containing monooxygenase (FMO) is active towards many drugs with a heteroatom having the properties of a soft nucleophile. Thiocarbamides and thiones are S-oxygenated to the sulfenic acid which can either react with glutathione and initiate a redox-cycle or be oxygenated a second time to the unstable sulfinic acid. In this study, we utilized LC–MS/MS to demonstrate that the oxygenation by hFMO of the thioureas under test terminated at the sulfenic acid. With thiones, hFMO catalyzed the second reaction and the sulfinic acid rapidly lost sulfite to form the corresponding imidazole. Thioureas are often pulmonary toxicants in mammals and, as previously reported by our laboratory, are excellent substrates for hFMO2. This isoform is expressed at high levels in the lung of most mammals, including non-human primates. Genotyping to date indicates that individuals of African (up to 49%) or Hispanic (2–7%) ancestry have at least one allele for functional hFMO2 in lung, but not Caucasians nor Asians. In this study the major metabolite formed by hFMO2 with thioureas from Allergan, Inc. was the sulfenic acid that reacted with glutathione. The majority of thiones were poor substrates for hFMO3, the major form in adult human liver. However, hFMO1, the major isoform expressed in infant and neonatal liver and adult kidney and intestine, readily S-oxygenated thiones under test, with K{sub m}s ranging from 7 to 160 μM and turnover numbers of 30–40 min{sup −1}. The product formed was identified by LC–MS/MS as the imidazole. The activities of the mouse and human FMO1 and FMO3 orthologs were in good agreement with the exception of some thiones for which activity was much greater with hFMO1 than mFMO1.

60 APPLIED LIFE SCIENCES↗

Reactions of DGEBA epoxy cured with diethanolamine: Isoconversional kinetics and implications to network structure

The curing of diglycidyl ether of bisphenol A (DGEBA) epoxy with diethanolamine (DEA) is studied. DEA has three reactive groups, a secondary amine hydrogen and two hydroxyls. The secondary amine reacts rapidly, forming an adduct containing tertiary amines, epoxides and hydroxyls. The epoxides and hydroxyls then react in the presence of the amines to crosslink and vitrify the epoxy in the “gelation” reaction. The gelation reaction, the subject of this study, is not simple. The reaction exhibits unusual dependencies on both temperature and degree of cure. Previously, the general mechanisms of this curing process were explored by a number of us. In the present paper, both differential scanning calorimetry (DSC) and isothermal microcalorimetry (IMC) are used to determine a number of characteristic times associated with the reaction. The characteristic times show that the reaction rate has different functional forms at different temperatures and extents of reaction. This results from the reaction rate not depending solely upon the temperature and over-all extent-of-reaction. The concentration of a number of auxiliary reactive species that are generated in the course of the reaction (as well as their mobility and steric hindrance) appear to be key factors in defining the reaction kinetics. The dependence of the final network structure on cure schedule for this type of tertiary amine activated reaction is then discussed in the context of the literature. Lastly, in the Supplementary Material, Kamal-like functions are fit to the isothermal reaction kinetics, with the reader cautioned in applying the functions to non-isothermal cures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamics and dehydration/hydration behaviors of Na-sulfate, -borate, and -bicarbonate minerals

Here, detailed thermal experiments using relative humidity- (RH) and temperature-controlled X-ray diffraction (XRD) and H 2 O adsorption/desorption measurements were applied to understand the dehydration/hydration behaviors of thenardite/mirabilite (Na 2 SO 4 /Na 2 SO 4 ·10H 2 O), tincalconite/borax (Na 2 B 4 O 7 ·5H 2 O/Na 2 B 4 O 7 ·10H 2 O), nahcolite (NaHCO 3 ), and qilianshanite (NaH 4 (BO 3 ) (CO 3 )·2H 2 O or NaHCO 3 ·H 3 BO 3 ·2H 2 O). The thermal behaviors of thenardite/mirabilite and tincalconite/borax were evaluated at room temperature as a function of RH. Hydration of thenardite to mirabilite is very sluggish and does not begin until at least 85 % RH, whereas dehydration of mirabilite to thenardite occurs at ~76 % RH. The reactions are accessible in the solid state and were not completely reversible on the time scale of these measurements. Qilianshanite appears stable under room conditions, as long as the RH is >20 %, supported by 2.5 months of observation during exposure to room air of known RH. Qilianshanite persists metastably for at least two days when exposed to both wet and 0% RH atmospheres at room temperature, observed during environment-controlled XRD. Below 20 % RH, qilianshanite sluggishly reacts to form tincalconite and nahcolite. When heated, qilianshanite broke down at 70 °C based on XRD results, and thermogravimetric analysis (TGA) confirmed a dehydration temperature of ~75 °C. Tincalconite hydrated to borax at 80 % RH, and dehydration from borax to tincalconite occurred at 40–50 % RH, illustrating the effective reversibility of the reaction under room conditions. The minor phase nahcolite originally in qilianshanite remained in the residue of decomposed qilianshanite after heating to 125 °C, demonstrated by continuous XRD measurements, whereas nahcolite was largely dehydrated when heated to ~100 °C during TGA. The difference can be attributed to the slower reaction kinetics in the environmental XRD. These results shed considerable light on the behavior of these minerals in the environment, particularly in evaporite deposits in Antarctica, where all of these minerals are reacting with the atmosphere on a diurnal-to-seasonal basis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In vitro metabolism of benzo[a]pyrene-7,8-dihydrodiol and dibenzo[def,p]chrysene-11,12 diol in rodent and human hepatic microsomes

Polycyclic aromatic hydrocarbons (PAHs) are contaminants that are ubiquitously found in the environment, produced through combustion of organic matter or petrochemicals, and many of which are procarcinogens. The prototypic PAH, benzo[a]pyrene (B[a]P) and the highly carcinogenic dibenzo[def,p]chrysene (DBC) are metabolically activated by isoforms of the P450 enzyme superfamily producing benzo[a]pyrene-7,8-dihydrodiol (B[a]P diol), dibenzo[def,p]chrysene-11,12 diol (DBC diol). Each of these diols can be further metabolized by cytochrome P450 enzymes to highly reactive diol-epoxide metabolites that readily react with DNA or by phase II conjugation facilitating excretion. To complement prior in vitro metabolism studies with parent B[a]P and DBC, both phase I metabolism and phase II glucuronidation of B[a]P diol and DBC diol were measured in hepatic microsomes from female B6129SF1/J mice, male Sprague-Dawley rats, and female humans. Metabolic parameters, including intrinsic clearance and Michaelis-Menten kinetics were calculated from substrate depletion data. Mice and rats demonstrated similar B[a]P diol phase I metabolic rates. Compared to rodents, human phase I metabolism of B[a]P diol demonstrated lower overall metabolic capacity, lower intrinsic clearance at higher substrate concentrations (>0.14 µM), and higher intrinsic clearance at lower substrate concentrations (<0.07 µM). Rates of DBC diol metabolism did not saturate in mice or humans and were highest overall in mice. Higher affinity constants and lower capacities were observed for DBC diol glucuronidation compared to B[a]P diol glucuronidation; however, intrinsic clearance values for these compounds were consistent within each species. Kinetic parameters reported here will be used to extend physiologically based pharmacokinetic (PBPK) models to include the disposition of B[a]P and DBC metabolites in animal models and humans to support future human health risk assessments.

59 BASIC BIOLOGICAL SCIENCES↗

Stabilizing effects of oxidation on propagating formation reactions occurring in nanometer-scale metal multilayers

Reactive rare-earth / transition metal multilayers exhibit a variety of complex reaction behaviors depending on surrounding gaseous environment and material design. Small period (< 100 nm bilayer), 5 gm-thick Sc/Ag multilayers undergo self-sustained formation reactions when ignited in air or in vacuum. High-speed videography reveals unstable reaction waves in these samples, characterized by the repeated, transverse passage of narrow, spin bands. Intermediate Sc/Ag designs — with multilayer period between 100 and 200 nm — only react in air. These multilayers exhibit propagating reactions with alternating unstable and stable characteristics. Narrow, spin bands advance the reaction front stepwise. Soon after the passage of a transverse band, a trailing oxidation wave encroaches on the intermetallic reaction front temporarily pushing the stalled wave forward in a uniform manner. Viewed in full, these events repeat giving rise to a new oscillatory behavior. Sc/Ag multilayers having a large period (> 200 nm bilayer) also react exclusively in air but exhibit a different propagating mode. The oxidation of Sc combined with the exothermic reaction of metal species results in continually-stable waves characterized by a smooth wavefront morphology and uniform velocity. The flame temperatures associated with propagating waves are estimated using measured heats of reaction and enthalpy-temperature relationships in order to provide insight into the possible phase transformations that occur during these different exothermic reactions.

36 MATERIALS SCIENCE↗

Removal potential of toxic 2378-substituted PCDD/F from incinerator flue gases by waste-derived activated carbons

The application of activated carbons has become a commonly used emission control protocol for the removal or adsorption of persistent organic pollutants from the flue gas streams of waste incinerators. In this study, the 2378-substituted PCDD/F removal efficiency of three types of activated carbons derived from the pyrolysis of refuse derived fuel, textile waste and scrap tyre was investigated and compared with that of a commercial carbon. Experiments were carried out in a laboratory scale fixed-bed reactor under a simulated flue gas at 275 deg. C with a reaction period of four days. The PCDD/F in the solid matrices and exhaust gas, were analyzed using gas chromatography coupled with a triple quadrupole mass spectrometer. In the absence of activated carbon adsorbent, there was a significant increase in the concentration of toxic PCDD/F produced in the reacted flyash, reaching up to 6.6 times higher than in the raw flyash. In addition, there was a substantial release of PCDD/F into the gas phase, which was found in the flue gas trapping system. By application of the different commercial, refuse derived fuel, textile and tyre activated carbons the total PCDD/F toxic equivalent removal efficiencies in the exhaust gas stream were 58%, 57%, 64% and 52%, respectively. In general, the removal of the PCDDs was much higher with an average of 85% compared to PCDFs at 41%. Analysis of the reacted activated carbons showed that there was some formation of PCDD/F, for instance, a total of 60.6 {mu}g I-TEQ kg{sup -1} toxic PCDD/F was formed in the refuse derived fuel activated carbon compared to 34 {mu}g I-TEQ kg{sup -1} in the commercial activated carbon. The activated carbons derived from the pyrolysis of waste, therefore, showed good potential as a control material for PCDD/F emissions in waste incinerator flue gases.

54 ENVIRONMENTAL SCIENCES↗

Extraction of lead from waste CRT funnel glass by generating lead sulfide – An approach for electronic waste management

Highlights: • Sodium carbonate and free silica in the glass react to generate sodium silicate and carbon dioxide. • Sodium sulfide and lead silicate group of glass began to react to lead sulfide and sodium silicate. • Lead sulfide got together in the bottom of the crucible under the action of gravity. • The generated lead sulfide was separated and collected in the bottom of the crucible. - Abstract: Waste cathode ray tube (CRT) funnel glass is the key and difficult points in waste electrical and electronic equipment (WEEE) disposal. In this paper, a novel and effective process for the detoxification and reutilization of waste CRT funnel glass was developed by generating lead sulfide precipitate via a high-temperature melting process. The central function in this process was the generation of lead sulfide, which gathered at the bottom of the crucible and was then separated from the slag. Sodium carbonate was used as a flux and reaction agent, and sodium sulfide was used as a precipitating agent. The experimental results revealed that the lead sulfide recovery rate initially increased with an increase in the amount of added sodium carbonate, the amount of sodium sulfide, the temperature, and the holding time and then reached an equilibrium value. The maximum lead sulfide recovery rate was approximately 93%, at the optimum sodium carbonate level, sodium sulfide level, temperature, and holding time of 25%, 8%, 1200 °C, and 2 h, respectively. The glass slag can be made into sodium and potassium silicate by hydrolysis in an environmental and economical process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Disinfection byproducts formed during drinking water treatment reveal an export control point for dissolved organic matter in a subalpine headwater stream

Changes in climate, season, and vegetation can alter organic export from watersheds. While an accepted tradeoff to protect public health, disinfection processes during drinking water treatment can adversely react with organic compounds to form disinfection byproducts (DBPs). By extension, DBP monitoring can yield insights into hydrobiogeochemical dynamics within watersheds and their implications for water resource management. In this study, we analyzed temporal trends from a water treatment facility that sources water from Coal Creek in Crested Butte, Colorado. These trends revealed a long-term increase in haloacetic acid and trihalomethane formation over the period of 2005-2020. Additionally, disproportionate export of dissolved organic carbon and formation of DBPs that exceeded regulatory guidelines were consistently recorded in association with late spring freshet. Synoptic sampling of the creek in 2020 and 2021 identified a biogeochemical hotspot for organic carbon export in the upper domain of the watershed that contained a prominent fulvic acid-like fluorescent signature. DBP formation potential analyses from this domain yielded similar ratios of dominant DBP species to those formed at the drinking water facility. Spectrometric qualitative analyses of pre and post-reacted waters with hypochlorite indicated ligninlike and condensed hydrocarbon-like molecules were the major reactive chemical classes during chlorine-based disinfection. This study demonstrates how drinking water quality archives can be coupled with synoptic sampling to identify and understand export control points for dissolved organic matter. Resultant understanding can be applied in water treatment and watershed management plans to improve drinking water quality sourced from analogous watersheds.

47 OTHER INSTRUMENTATION↗

Investigation of Mineral Transformations in Wet Supercritical CO2 by Electron Microscopy

The capture and storage of carbon dioxide and other greenhouse gases in deep geologic formations represents one of the most promising options for mitigating the impacts of greenhouse gases on global warming. In this regard, mineral-fluid interactions are of prime importance since such reactions can result in the long term sequestration of CO2 by trapping in mineral phases. Recently it has been recognized that interactions with neat to water-saturated non-aqueous fluids are of prime importance in understanding mineralization reactions since the introduced CO2 is likely to contain water initially or soon after injection and the supercritical CO2 (scCO2) is less dense than the aqueous phase which can result in a buoyant scCO2 plume contacting the isolating caprock. As a result, unraveling the molecular/microscopic mechanisms of mineral transformation in neat to water saturated scCO2 has taken on an added important. In this study, we are examining the interfacial reactions of the olivine mineral forsterite (Mg2SiO4) over a range of water contents up to and including complete water saturation in scCO2. The surface precipitates that form on the reacted forsterite grains are extremely fragile and difficult to experimentally characterize. In order to address this issue we have developed experimental protocols for preparing and imaging electron-transparent samples from fragile structures. These electron-transparent samples are then examined using a combination of STEM/EDX, FIB-TEM, and helium ion microscope (HIM) imaging (Figures 1-3). This combination of capabilities has provided unique insight into the geochemical processes that occur on scCO2 reacted mineral surfaces. The experimental procedures and protocols that have been developed also have useful applications for examining fragile structures on a wide variety of materials. This research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research located at Pacific Northwest National Laboratory.

CO2↗

Chemical Analysis of Complex Organic Mixtures Using Reactive Nanospray Desorption Electrospray Ionization Mass Spectrometry

Reactive nanospray desorption electrospray ionization (nano-DESI) combined with high-resolution mass spectrometry was utilized for the analysis of secondary organic aerosol produced through ozonolysis of limonene (LSOA). Previous studies showed that LSOA constituents are multifunctional compounds containing aldehyde and ketone groups. In this study, we used the selectivity of the Girard T (GT) reagent towards carbonyl compounds to examine the utility of reactive nano-DESI for the analysis of complex organic mixtures. In these experiments, 1-100 {micro}M GT solution was used as a working solvent for reactive nano-DESI analysis. Abundant products of a single addition of GT to LSOA constituents were observed at GT concentrations in excess of 10 {micro}M. We found that LSOA compounds with 18-20 carbon atoms (dimers) and 27-30 carbon atoms (trimers) react with GT through a simple addition reaction resulting in formation of the carbinolamine derivative. In contrast, reactions of GT with monomeric species result in formation of both the carbinolamine and the hydrazone derivatives. In addition, several monomers did not react with GT on the timescale of our experiment. These molecules were characterized by relatively high values of the double bond equivalent (DBE) and low oxygen content. Furthermore, because addition of a charged GT tag to a neutral molecule eliminates the discrimination against the low proton affinity compounds in the ionization process, reactive nano-DESI analysis enables quantification of individual compounds in the complex mixture. For example, we were able to estimate for the first time the amounts of dimers and trimers in the LSOA mixture. Specifically, we found that the most abundant LSOA dimer was detected at ca. 0.5 pg level and the total amount of dimers and trimers in the analyzed sample was just around 11 pg. Our results indicate that reactive nano-DESI is a valuable approach for examining the presence of specific functional groups and quantification of compounds possessing these groups in complex mixtures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗