Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Structural, Electrical, and Optical Properties of Single-Walled Carbon Nanotubes Synthesized through Floating Catalyst Chemical Vapor Deposition

Single-walled carbon nanotube (SWCNT) thin films were synthesized by using a floating catalyst chemical vapor deposition (FCCVD) method with a low flow rate (200 sccm) of mixed gases (Ar and H 2 ). SWCNT thin films with different thicknesses can be prepared by controlling the collection time of the SWCNTs on membrane filters. Transmission electron microscopy (TEM) showed that the SWCNTs formed bundles and that they had an average diameter of 1.46 nm. The Raman spectra of the SWCNT films suggested that the synthesized SWCNTs were very well crystallized. Although the electrical properties of SWCNTs have been widely studied so far, the Hall effect of SWCNTs has not been fully studied to explore the electrical characteristics of SWCNT thin films. In this research, Hall effect measurements have been performed to investigate the important electrical characteristics of SWCNTs, such as their carrier mobility, carrier density, Hall coefficient, conductivity, and sheet resistance. The samples with transmittance between 95 and 43% showed a high carrier density of 10 21– 10 23 cm –3 . The SWCNTs were also treated using Brønsted acids (HCl, HNO 3 , H 2 SO 4 ) to enhance their electrical properties. After the acid treatments, the samples maintained their p-type nature. The carrier mobility and conductivity increased, and the sheet resistance decreased for all treated samples. The highest mobility of 1.5 cm 2 /Vs was obtained with the sulfuric acid treatment at 80 °C, while the highest conductivity (30,720 S/m) and lowest sheet resistance (43 ohm/square) were achieved with the nitric acid treatment at room temperature. Different functional groups were identified in our synthesized SWCNTs before and after the acid treatments using Fourier-Transform Infrared Spectroscopy (FTIR).

36 MATERIALS SCIENCE↗

Defect-induced phonon-resonant scattering and its influence on thermal transport of irradiated thorium-dioxide

Thermal transport in proton irradiated thorium-dioxide (ThO 2 ) is investigated. Using a combination of experiments and first-principles computational framework, the role of lattice defects on thermal conductivity is analyzed. A resonant-phonon scattering mechanism beyond the traditionally considered Rayleigh scattering is found to significantly influence low-temperature thermal transport in the presence of irradiation-induced point defects. The existence of localized phonon modes associated with irradiation-induced defects is suggested by the inability of the first-principles based thermal conductivity model—which considers only three-phonon interactions and phonon-defects scattering using the Tamura formalism—to predict the experimental results, unless a resonant scattering mechanism is included. The emergence of additional peaks in the Raman spectra in the proximity of phonon-resonant frequency provides further evidence for the existence of localized modes. Coupled with a microstructure evolution model, this analysis enables more accurate analysis for contrasting the contributions of different phonon scattering mechanisms across all irradiation doses and temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of PuO 2 With Visible and UV Raman Spectroscopy: Discrimination Between the Bulk, Surface, and an Intermediate Disordered Layer

Raman spectroscopy is an ideal tool in the characterization of materials including PuO 2 . The wavelength-dependent absorptivity of the material defines the light penetration depth and the relative Raman scattering contribution from the bulk and the surface. Here, the surface contribution to the total Raman scattering was investigated for PuO 2 calcined at various temperatures and recorded with laser wavelengths of 355, 325, and 244 nm. These experiments provided the first glimpse of the wavelength-dependent disappearance and emergence of new phonons and electronic bands from the PuO 2 surface layers. The first indication of the wavelength transition in the Raman spectra was the loss of the 2LO2 (overtone, ~1155 cm -1 ) band and the weakening intensity of the Г 1 → Γ 5 electronic band (~2135 cm -1 ) with the 355-nm excitation laser. The Γ 5 electronic band was barely visible with the 244-nm excitation. The electronic band located at ~1050 cm -1 , corresponding to the Г 1 → Γ 4 electronic transition was observed to dramatically increase in intensity while the Г 1 → Γ 3 electronic band (2640 cm -1 ) sharpened as the UV wavelength was increased in energy from the near- to deep-UV (355–325–244 nm). The FWHM of the T 2g band was found to vary with calcination temperature (450°C and 900°C) with the 325-nm laser and the 244-nm laser. The T 2g band attributes, the strong emergence of the Г 1 → Γ 4 electronic band, and the disappearance of the 2LO2 overtone acquired with the 244-nm excitation for the different calcination temperatures suggest a shallow penetration depth.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Molecular structure and sour gas surface chemistry of supported K 2 O/WO 3 /Al 2 O 3 catalysts

Molecular structures of the unprompted and K 2 O-promoted supported WO 3 /Al 2 O 3 catalysts were studied with in situ Raman and UV-vis spectroscopy. In situ Raman spectra revealed that supported 20% WO 3 /Al 2 O 3 corresponds to near monolayer coverage of isolated and oligomeric surface WOx species on Al 2 O 3 . Above monolayer surface WO x coverage (21% WO 3 /Al 2 O 3 ), crystalline WO 3 nanoparticles are also present. The addition of K 2 O to the supported WO 3 /Al 2 O 3 catalyst increased the concentration of isolated surface WO x species and did not form K 2 WO 4 nanoparticles. The reducibility of the tungsten oxide structures depends on their structures (2D or 3D) and the K 2 O promoter. Their interaction with acidic CO 2 and SO 2 gases was also investigated. Adsorption of CO 2 creates several surface carbonate species of varying acidity that were detected using a combination of in situ IR and mass spectroscopy. Adsorbed bicarbonate form on weakly basic surface sites on tungsten oxide monolayer WO 3 /Al 2 O 3 catalyst as well as in the presence of low 2.5% K 2 O loading. At high 5% K 2 O loading, the presence of the strong surface basic sites yields adsorbed carbonates. In conclusion, after SO 2 pretreatment, however, new strongly adsorbed sulfate appears on the surface that inhibit CO 2 adsorption.

36 MATERIALS SCIENCE↗

Structural and Bonding Analysis in Monomeric Actinide(IV) Oxalate from Th(IV) to Pu(IV): Comparison with the An(IV) Nitrate Series

In this work, single-crystal X-ray diffraction (SC-XRD) structures and Raman spectra of a series of new isomorphous molecular An(IV)-oxalate compounds (Th, U, Np, and Pu) are reported. These complexes are crystallized with cobalt(III) hexamine ([Co(NH 3 ) 6 ] 3+ ) as the counter cations, [Co(NH 3 ) 6 ] 2 [An(C 2 O 4 ) 5 ]·4H 2 O, revealing five bidentate nonbridging oxalate ligands in the first coordination sphere (CN = 10). The nonbridging oxalate is rather uncommon for An(IV)-oxalate systems, which are widely characterized as polymeric compounds. Density functional theory (DFT) calculations were performed to examine the bonding between An(IV) cations and oxalate ligands. For comparison, we also report results obtained for the An(IV)-hexanitrate series, [(C 2 H 5 ) 4 N] 2 [An(NO 3 ) 6 ] (with An = Th, U, Np, Pu, and Ce), which consists of O-donor ligands as well but with a larger coordination number (CN = 12). The bonding analysis confirms that the actinide–oxygen bond is predominantly ionic with a minor increase in covalency from Th to U and slight variations from U to Pu. Further comparison showed that the charge transfer increases slightly when increasing the number of anions in the coordination sphere (C 2 O$_4^{2–}$: CN = 10; NO$_3^–$: CN = 12), but covalent effects as indicated by the amount of internuclear electron density accumulation are small and similar for oxalate and nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental estimation of the bisulfite isomer quotient as a function of temperature: Implications for sulfur isotope fractionations in aqueous sulfite solutions

Bisulfite (HSO 3 - ) and sulfite (SO 3 2- ) compounds play key roles in numerous geochemical and biochemical processes extending from the atmosphere to the subseafloor biosphere. Despite decades of spectroscopic investigations, the molecular composition of HSO 3 - in solution remains uncertain and, thus, the role of bisulfite in (bio)chemical and isotope fractionation processes is unclear. We report new experimental estimates for the bisulfite isomer quotient (Qi= [(HO)SO 2 - ]/[(HS)O3-]; [] = concentration) as a function of temperature from the interpretation of Raman spectra collected from aqueous NaHSO 3 solutions contained in fused silica capsules. In pure NaHSO 3 solutions (1Na + :1HSO 3 - , stoichiometric) over [NaHSO 3 ] = 0.2–0.4 m (moles/kg H 2 O), the following relationship is obtained: ln(Q i )=[formula omitted]-1.9642(±0.1081),where T = 278–358 K (5–85 °C) (based on 50 determinations; additional significant figures are provided to avoid rounding errors). This relationship suggests that the minor isomer, (HS)O 3 - , may comprise 23–38% (±3%) of the mole fraction of HSO 3 - over 5–85 °C, respectively, which is higher in relative abundance than has generally been understood previously. We additionally provide estimates for Q i in NaHSO 3 solutions containing a total ionic strength of µ = 1.0 m (0.2 m NaHSO 3 + 0.8 m NaCl) and different pH (3.3–4.5), but do not appear to resolve any significant differences in Q i as a function of these additional variables. These new values of Q i are employed to re-assess the bulk sulfur isotope fractionations among bisulfite and other S(IV) compounds as a function of temperature, which appear to be highly dependent on the amount of (HS)O 3 - present. Our new constraints on the bisulfite isomer quotient may allow for a detailed assessment of the molecular composition and isotope mass balance of S(IV) solutions containing HSO 3 - , and may be useful in the further investigation of the mechanisms and isotope fractionations associated with a number of processes that involve bisulfite compounds. Furthermore, these may include the intracellular enzymatic transformations of sulfite and bisulfite compounds that occur as part of dissimilatory sulfate reduction, which is a major and geologically important form of anaerobic respiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aligned van der Waals Coupled Growth of Carbon Nanotubes to Hexagonal Boron Nitride

Abstract 1D carbon nanotubes (CNTs) are grown on hexagonal boron nitride (hBN) surfaces. The nanotubes show clear preference to align to specific crystal directions of the hBN substrate. Raman spectra confirm that the nanotubes consist of sp 2 carbon, while nanomanipulation shows that they are van der Waals coupled to the underlying hBN substrate. Scanning conductance and electric force microscopy show that the CNTs have significantly greater electrical conductance compared to the hBN. This integrated aligned growth of materials with similar lattices, yet having dissimilar dimensionality and electrical conducting properties, provides a promising route to achieving intricate nanoscale electrical circuits on high‐quality insulating substrates.

Nasseri, Mohsen↗

Dynamical Bonding Driving Mixed Valency in a Metal Boride

Abstract Samarium hexaboride is an anomaly, having many exotic and seemingly mutually incompatible properties. It was proposed to be a mixed‐valent semiconductor, and later a topological Kondo insulator, and yet has a Fermi surface despite being an insulator. We propose a new and unified understanding of SmB 6 centered on the hitherto unrecognized dynamical bonding effect: the coexistence of two Sm−B bonding modes within SmB 6 , corresponding to different oxidation states of the Sm. The mixed valency arises in SmB 6 from thermal population of these distinct minima enabled by motion of B. Our model simultaneously explains the thermal valence fluctuations, appearance of magnetic Fermi surface, excess entropy at low temperatures, pressure‐induced phase transitions, and related features in Raman spectra and their unexpected dependence on temperature and boron isotope.

Robinson, Paul J.↗

Key Features of Polyimide‐Derived Carbon Molecular Sieves

Abstract Carbon molecular sieve (CMS) membranes have impressive separation properties; however, both chemical and morphology structures need to be understood better. Here we characterize CMS with the simplest polyimide (PI) PMDA/pPDA (PMDA=pyromellitic dianhydride, pPDA= p ‐phenylenediamine), using FTIR, solid‐state 15 N‐NMR and 13 C‐NMR, XPS, XRD, and Raman spectra to study chemical structure. We also compare gas separation properties for this CMS to a CMS derived from a more conventional PI precursor. The detailed characterization shows the presence of aromatic pyridinic, pyrrolic rings as well as graphitic, pyridonic components and a few other groups in both CMS types derived from the very different precursors. The CMS morphologies, while related to precursor and pyrolysis temperature details, show similarities consistent with a physical picture comprising distributed molecular sieving plate‐like structures. These results assist in understanding diverse CMS membrane separation performance.

Qiu, Wulin↗

Concentrated Electrolyte for the Sodium-Oxygen Battery: Solvation Structure and Improved Cycle Life

Alkali metal-oxygen batteries are of great interests for energy storage because of their unparalleled theoretical energy densities. Particularly attractive is the emerging Na-O 2 battery because of the formation of superoxide as the discharge product. Dimethyl sulfoxide (DMSO) is a promising solvent for this battery but its instability towards Na makes it impractical in the Na-O 2 battery. Here in this paper, we report the enhanced stability of Na in DMSO solutions containing concentrated sodium trifluoromethanesulfonimide (NaTFSI) salts (>3molkg -1 ). Raman spectra of NaTFSI/DMSO electrolytes and abinitio molecular dynamics simulation reveal the Na + solvation number in DMSO and the formation of Na(DMSO) 3 (TFSI)-like solvation structure. The majority of DMSO molecules solvating Na + in concentrated solutions reduces the available free DMSO molecules that can react with Na and renders the TFSI anion decomposition, which protects Na from reacting with the electrolyte. Using these concentrated electrolytes, Na-O 2 batteries can be cycled forming sodium superoxide (NaO 2 ) as the sole discharge product with improved long cycle life, highlighting the beneficial role of concentrated electrolytes for Na-based batteries.

25 ENERGY STORAGE↗

Key Features of Polyimide-Derived Carbon Molecular Sieves

Carbon molecular sieve (CMS) membranes have impressive separation properties; however, both chemical and morphology structures need to be understood better. Here we characterize CMS with the simplest polyimide (PI) PMDA/pPDA (PMDA=pyromellitic dianhydride, pPDA=p-phenylenediamine), using FTIR, solid-state 15 N-NMR and 13 C-NMR, XPS, XRD, and Raman spectra to study chemical structure. Here we also compare gas separation properties for this CMS to a CMS derived from a more conventional PI precursor. The detailed characterization shows the presence of aromatic pyridinic, pyrrolic rings as well as graphitic, pyridonic components and a few other groups in both CMS types derived from the very different precursors. The CMS morphologies, while related to precursor and pyrolysis temperature details, show similarities consistent with a physical picture comprising distributed molecular sieving plate-like structures. These results assist in understanding diverse CMS membrane separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioinspired Activation of N 2 on Asymmetrical Coordinated Fe Grafted 1T MoS 2 at Room Temperature

Inspired by the nitrogen fixation process on MoFe nitrogenase, asymmetrical coordinated Fe grafted onto 1T MoS 2 were successfully synthesized. The unique electron -rich structure with asymmetrical coordination made the 1T Fe 0.1 Mo 0.9 S 2 layered material actively react with water and dinitrogen at room temperature and atmosphere pressure. Subsequently, ammonia can be produced with a yield of 800 pmol (NH 4 + ) g -1 (12.5% yield in mole). The activation, fixation and reduction of dinitrogen were confirmed by isotopically labeled experiments. The location and the specific coordination environment of grafted Fe in Fe-Mo-S were further determined by X-ray absorption spectroscopy analysis. Our work demonstrates that the nitrogen fixation and reduction for ammonia at room temperature without any chemical and electrochemical assistance is distinctly different from traditional bionic -inspired nitrogen fixation process. The mechanism of the activation and reduction of N 2 was further investigated by density functional theory calculation and Raman spectra. Compared with 1T MoS 2 , the enriched electron nature and asymmetrical coordination of Fe in Fe-Mo-S materials play a critical role in the bioinspired activation of N 2 at ambient condition.

1T MoS2↗

Ordered Mesoporous CMK-5 Carbon with Ultra-Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Ordered mesoporous CMK-5 carbons with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2, 3-di-hydroxynaphtalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)2.6H2O] solution in isopropanol added to the carbon-silica nanocomposites prior to thermal treatments. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM) and in situ electron diffraction X-ray spectroscopy (EDX). While TG revealed carbon contents lower than 30 wt%, nitrogen adsorption provided information about homogeneity of carbon thin film deposited onto mesopore walls of ordered silica templates, SBA-15. The templates, carbon-silica nanocomposites and carbon inverse replicas with nickel nanoparticles exhibited uniform pores, high surface areas and large pore volumes. Graphitic carbon was identified by the presence of a characteristic G band on Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD.The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles were uniform in size, ~3nm, and were homogeneously dispersed within ordered tubular carbon walls. A few larger clusters of nickel, ~60nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles were largely composed of Ni with traces of NiO. Similar nanoparticles dispersions have been reported only for Ni-containing multi-walled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbons possessed larger Ni/NiO nanoparticles within CMK-3 nanostructure.

36 MATERIALS SCIENCE↗

Two-Dimensional Uranyl Borates: From Conventional to Extreme Synthetic Conditions: Two-Dimensional Uranyl Borates: From Conventional to Extreme Synthetic Conditions

A systematic investigation of uranyl borates under different synthetic conditions resulted in five new 2D compounds, namely, (H 3 O)[(UO 2 )(BO 3 )], Li[(UO 2 )(BO 3 )] · (H 2 O), α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ], β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] and K 2.5 [(UO 2 ) 5 (BO 3 ) 2 O 2.5 (OH) 1.5 ] · (H 2 O) 2.5 . (H 3 O)[(UO 2 )(BO 3 )] and Li[(UO 2 )(BO 3 )] · (H 2 O) were obtained from hydrothermal reactions at 220 °C using the same mineralizer. Both materials possess the uranophane sheet topology with different symmetry of the unit cells. In the structure of (H 3 O)[(UO 2 )(BO 3 )] and Li[(UO 2 )(BO 3 )] · (H 2 O), UO 7 pentagonal bipyramids share edges and vertexes with four BO 3 planar triangles. α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] and β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] are polytypes. α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] was synthesized from a high-temperature solid-state reaction under ambient pressure; whereas β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] was obtained from a high-temperature/high-pressure (HT/HP) reaction. Both structures have an identical anion topology, but β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] crystallizes in space group with higher symmetry. In K 2.5 [(UO 2 ) 5 (BO 3 ) 2 O 2.5 (OH) 1.5 ] · (H 2 O) 2.5 , which was obtained from a hydrothermal reaction, UO 7 polyhedra share vertexes and edges with two independent BO 3 triangles, forming the most complex uranyl borate layers among all five compounds. The different synthetic routes, novel topologies, thermal behavior and Raman spectra are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Raman spectroscopy study of reduced strontium barium niobate (SBN61) and hints of supergrowth or intergrowth structures

Reduced strontium barium niobate, Sr x Ba 1-x Nb 2 O 6 (SBN), is a potential candidate for oxide thermoelectrics. In order to understand the effects of oxygen reduction on the structure and properties of SBN, room temperature Raman spectra of reduced and unreduced crystals with composition x=0.61 (SBN61) have been measured, fitted and compared, for incident light polarized successively along the crystallographic a and c-axes. Unexpectedly, the low frequency spectra (<200 cm -1 ) of reduced SBN are found to display much better resolved and intense peaks than those of unreduced SBN, suggestive of a more ordered and compact lattice arrangement in reduced SBN. Shape changes of certain peaks and the disappearance or appearance of other peaks (30 cm -1 /1000 cm -1 ) are also observed as a result of reduction. Comparison of the experimental spectra and fits of the unreduced and reduced crystals are suggestive of a redistribution of the remaining oxygen anions, structural rearrangements and the development of super- or inter-growth structures in reduced SBN. The reduced spectra are found to be very similar to the published spectra of the H-form of niobium oxide, H-Nb 2 0 5 , which is made up of a regular block arrangement of corner-sharing and edge-sharing oxygen octahedra. These structural changes may play an important role in the enhanced electrical conductivity of reduced SBN.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Particle Size on Raman Signal Strength of Silicate Minerals

Understanding the effects of particle size is necessary for quantifying minerals in mixtures using Raman spectroscopy. Raman signal intensity is evaluated using six common silicate minerals (two olivines, two pyroxenes, and two feldspars) at 10 particle size ranges. For olivines and feldspars, the highest peak intensities are observed in samples with 38–63 and 63–106 μm particle sizes. There is no such consistent trend for the pyroxene samples, although the overall low signal strength complicates those measurements. In conclusion, Raman spectra of samples with varying particle sizes appear to be influenced by two competing effects: scattering from particle boundaries and effective sampling volume.

58 GEOSCIENCES↗

Mechanism of Lithium Ion Exchange Into Spinel Manganese Oxide

Lithium manganese oxide (LMO) is an effective absorbent for lithium recovery from brines, characterized by its high adsorption capacity, excellent regeneration performance, and selectivity. Here, this study investigates the mechanisms of material degradation during lithium loading and unloading in LMO, employing a combination of time‐resolved Raman spectroscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Key findings reveal that the A 1g vibrational mode wavenumber shifts from 635 cm −1 at the onset of lithium ion exchange to 656 cm −1 after 12 min, indicating local symmetry loss and manganese (Mn) loss during lithium intercalation. The proposed lithium exchange mechanism involves initial occupation of tetrahedral interstitial voids, followed by migration into interstitial sites between Mn octahedral sites. Computational modeling suggests that the loss of symmetry in MnO cubane‐like groups occurs as lithium migrates, significantly affecting the Raman spectra. Importantly, the study demonstrates that after 100 cycles of lithium/hydrogen loading, a 24% loss in Mn is observed, which correlates with decreased structural stability; however, the structural integrity of LMO is enhanced when subjected to multiple cycles without complete loading. Here, these insights contribute to the understanding of LMO's performance in lithium recovery applications and highlight potential strategies to optimize its use in future technologies.

15 GEOTHERMAL ENERGY↗