Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power system control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Solid state power controllers

Solid state power controllers (SSPC's) are to be considered for use as replacements of electromechanical relays and circuit breakers in future spacecraft and aircraft. They satisfy the combined function of both the relay and circuit breaker and can be remotely controlled by small signals, typically 10 mA, 5 to 28 v(dc). They have the advantage over conventional relay/circuit breaker systems in that they can be located near the utilization equipment and the primary ac or dc bus. The low level control, trip indication and status signals can be circuited by small gauge wire for control, computer interface, logic, electrical multiplexing, onboard testing, power management, and distribution purposes. This results in increased system versatility at appreciable weight saving and increased reliability. Conventional systems require the heavy gage load wiring and the control wiring to be routed from the bus to the load to other remote relay contacts, switches, sensors, etc. and to the circuit breaker located in the flight engineer's compartment for purposes of manual reset.

Gibbs, R. S.↗
NASA NTRS1971

RF-controlled implantable solid state switch

Miniature, totally implantable, solid state RF-controlled switching circuit for biotelemetry systems consumes zero power in off condition and turns on or off by pulse of RF energy. Switch, the size of small coin, is reducible by integrated circuit techniques.

Fryer, T. B.↗
NASA NTRS1971

Status of nuclear light bulb engine design and performance analyses.

The dynamic response is discussed of a nuclear light bulb engine to perturbations at full-power operating conditions, both with and without control systems. Start-up and shutdown procedures are described, along with the provisions for residual afterheat removal. Problems associated with uprated engine designs are examined. The results of some analytical studies indicate that satisfactory control can be obtained by varying the fuel injection rate by means of a control valve which responds to the rate of change of neutron flux, or to the difference between the instantaneous and steady-state neutron fluxes.

Bauer, H. E.↗
NASA NTRS1973

Free-flying teleoperator requirements and conceptual design.

A teleoperator, as defined by NASA, is a remotely controlled cybernetic man-machine system designed to augment and extend man's sensory, manipulative, and cognitive capabilities. Teleoperator systems can fulfill an important function in the Space Shuttle program. They can retrieve automated satellites for refurbishment and reuse. Cargo can be transferred over short or large distances and orbital operations can be supported. A requirements analysis is discussed, giving attention to the teleoperator spacecraft, docking and stowage systems, display and controls, propulsion, guidance, navigation, control, the manipulators, the video system, the electrical power, and aspects of communication and data management. Questions of concept definition and evaluation are also examined.

Onega, G. T.↗
NASA NTRS1973

ERTS-1 flight evaluation report, 23 April - 23 July 1973

The flight performance of the ERTS-1 satellite is analyzed for orbits 3810 to 5100. Systems analyzed include: orbital parameters, power subsystem, attitude control, telemetry, orbit adjust, thermal control, and data collection. Documents and reports related to the evaluation are also included.

Source record↗
NASA NTRS1974

Research on fluidics, valves, and proportional amplifiers

Research and development being conducted at the Systems and Controls Laboratory is reviewed. Static characteristics (supply, input, transfer, output, and noise characteristics) of laminar proportional amplifiers were investigated. Other topics discussed include velocity profiles for laminar fluidic jets, speed control systems employing a jet pipe valve, and power amplification with a vortex valve.

Source record↗
NASA NTRS1976

LANDSAT-1 and LANDSAT-2 flight evaluation

Flight performances of LANDSAT 1 and LANDSAT 2 are evaluated. The in-flight systems discussed are: (1) power supplies, (2) attitude control, (3) command/clock, (4) telemetry, (5) orbit adjust, (6) electrical interface, (7) thermal, (8) tape recorders, (9) multispectral scanner, (10) data collection and (11) magnetic moment compensating assembly. Tables are presented for easy reference.

Source record↗
NASA NTRS1978

The High Energy Astronomy Observatory X-ray Telescope

The High Energy Astronomy Observatory-Mission B (HEAO-B) is a satellite observatory for the purpose of performing a detailed X-ray survey of the celestial sphere. Measurements will be made of stellar radiation in the range 0.2 through 20 keV. The primary viewing requirement is to provide final aspect solution and internal alignment information to correlate an observed X-ray image with the celestial sphere to within one-and-one-half arc seconds. The Observatory consists of the HEAO Spacecraft together with the X-ray Telescope. The Spacecraft provides the required attitude control and determination system, data telemetry system, space solar power system, and interface with the launch vehicle. The X-ray Telescope includes a high resolution mirror assembly, optical bench metering structure, X-ray detectors, detector positioning system, detector electronics and aspect sensing system.

Miller, R.↗
NASA NTRS1981

Dynamics Explorer twin spacecraft under evaluation tests

The Dynamics Explorer A and B satellites designed to explore the interactive processes occuring between the magnetosphere and Earth's ionosphere, upper atmosphere, and plasmasphere are described. Effects of these interactions, satellite orbits, data collecting antennas, solar power systems, axes, configurations, and Earth based command, control and data display systems are mentioned.

Redmond, C.↗
NASA NTRS1980

An interferometer based phase control system

An interferometer based phase control system for focusing and pointing the solar power satellite (SPS) power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8 bit phase error correction back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the rectenna.

Ott, J. H.↗
NASA NTRS1982

The pilot's role in manned space flight

The present investigation regarding the pilot's role in manned space flight takes into account space missions conducted with the Mercury capsule, Gemini, Apollo, Skylab, and the Shuttle. It is concluded that advancements in digital systems and automation technology have made many of the space pilot's tasks easier. However, these advancements have also made the space pilot's training more complicated. He must be familiar with the interrelated failure effects in highly complex vehicle systems. The nominal performance of the Shuttle fly-by-wire entry control system depends, for instance, on nominal electrical power from three fuel cells, nominal performance of three hydraulic auxiliary power units, five computers, other equipment, and microwave landing systems. The pilot must monitor and manage failures in these systems, and, in addition, must be prepared to intervene if an abort situation creates off-nominal conditions.

North, W. J.↗
NASA NTRS1986

A space station Structures and Assembly Verification Experiment, SAVE

The Space Station structure has been baselined to be a 5 M (16.4 ft) erectable truss. This structure will provide the overall framework to attach laboratory modules and other systems, subsystems and utilities. The assembly of this structure represents a formidable EVA challenge. To validate this capability the Space Station Structures/Dynamics Technical Integration Panel (TIP) met to develop the necessary data for an integrated STS structures flight experiment. As a result of this meeting, the Langley Research Center initiated a joint Langley/Boeing Aerospace Company study which supported the structures/dynamics TIP in developing the preliminary definition and design of a 5 M erectable space station truss and the resources required for a proposed flight experiment. The purpose of the study was to: (1) devise methods of truss assembly by astronauts; (2) define a specific test matrix for dynamic characterization; (3) identify instrumentation and data system requirements; (4) determine the power, propulsion and control requirements for the truss on-orbit for 3 years; (5) study the packaging of the experiment in the orbiter cargo bay; (6) prepare a preliminary cost estimate and schedule for the experiment; and (7) provide a list of potential follow-on experiments using the structure as a free flyer. The results of this three month study are presented.

Russell, R. A.↗
NASA NTRS1986

Spacecraft 2000

The objective of the Workshop was to focus on the key technology area for 21st century spacecraft and the programs needed to facilitate technology development and validation. Topics addressed include: spacecraft systems; system development; structures and materials; thermal control; electrical power; telemetry, tracking, and control; data management; propulsion; and attitude control.

Source record↗
NASA NTRS1988

Spacecraft and mission design for the SP-100 flight experiment

The design and performance of a spacecraft employing arcjet nuclear electric propulsion, suitable for use in the SP-100 Space Reactor Power System (SRPS) Flight Experiment, are outlined. The vehicle design is based on a 93 kW(e) ammonia arcjet system operating at an experimentally measured specific impulse of 1031 s and an efficiency of 42.3 percent. The arcjet/gimbal assemblies, power conditioning subsystem, propellant feed system, propulsion system thermal control, spacecraft diagnostic instrumentation, and the telemetry requirements are described. A 100 kW(e) SRPS is assumed. The spacecraft mass is baselined at 5675 kg excluding the propellant and propellant feed system. Four mission scenarios are described which are capable of demonstrating the full capability of the SRPS. The missions considered include spacecraft deployment to possible surveillance platform orbits, a spacecraft storage mission, and an orbit raising round trip corresponding to possible orbit transfer vehicle (OTV) missions.

Deininger, William D.↗
NASA NTRS1989

Development status of the SP-100 power system

The SP-100 Program, whose goal is to develop 10 to 1000 kW electric space reactor power systems for use in civil and military space missions in the mid 1990s and beyond, is described. The major accomplishments of the SP-100 ground engineering system development project are: (1) completion of the preliminary design of the reactor test facility, and (2) completion of the generic flight system design which meets the technical specifications and is the basis for all the ground engineering system analytical and experimental tasks. The power conditioning, control, and distribution subsystem is indicated schematically.

Mondt, Jack F.↗