Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Morphology and elemental composition of a new iron-rich ferrite phase in highly irradiated austenitic steel

Here, elemental composition and morphology of a previously unidentified radiation-induced ferrite phase were investigated in a 300-series steel irradiated by neutrons in-service up to 57.6 dpa. Specimens of 18Cr-10Ni-Ti stainless steel (AISI 321 analog) were cut from a hexagonal wrapper of a fuel assembly irradiated in the BN-350 sodium-cooled fast reactor. An Fe-rich bcc-phase was observed primarily on grain boundaries. In this phase, the concentration of Cr is ~8–12% (compared to ~19% in the matrix), the concentration of Ni is ~1.5–3% (~9% in the bulk material), and the concentration of Mn is ~0.23% (1.3% in the matrix). This Fe-rich phase is distinctly different from the retained-ferrite phase, commonly found in commercial austenitic steels. The extensive appearance of this Fe-rich ferrite on grain boundaries suggests that enhanced surface–intergranular corrosion may occur in water-cooled power reactors, arising from the low Ni, Mn, and Cr concentrations in this phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Crystallographic ordering of Al and Sn in α-Ti

Increasing attention is being paid to α (2) Ti 3 (Al,Sn) precipitation from the α phase of titanium alloys owing to its effect on slip band formation, localisation and the implications for fatigue performance in jet engine titanium. However, the early stages of α 2 precipitation have historically been difficult to observe by electron microscopy, neutron diffraction or atom probe analysis. Here, small angle X-ray scattering is used to reexamine the phase boundary in binary Ti-Al and Ti-Sn alloys with around 500 ppmw O. It is found that the phase boundaries in the literature are approximately correct, at 6.2 wt.% Al and 16.9 wt.% Sn, and that this favours the use of Al as a solid solution strengthener over Sn for ambient temperature applications. However, once O content and phase partitioning in α + β alloys are taken into account, this implies that Al eq limits for future alloy design of critical rotating parts should be lowered substantially.

36 MATERIALS SCIENCE↗
DOE OSTI2026

In-situ synchrotron X-ray investigation of phase evolution in gas atomized powder enabling manufacturing of nanoscale oxide-dispersion strengthened ferritic steels

Here, we present an investigation of Fe-14Cr-3W-0.4Y-0.4Zr-0.18Ti (wt.%) as a reduced-activation oxide-dispersion strengthened (ODS) ferritic steel, an alternative to the “14YWT” structural alloys designed for nuclear energy applications. Gas atomization reaction synthesis (GARS) was used to produce these Zr-modified powders with a non-equilibrium (metastable) phase that enable a heat treatment (delayed) route for producing nanoscale oxide-dispersion strengthening. In situ synchrotron X-ray diffraction and transmission electron microscopy were used to analyze phase evolution as a function of temperature and time, revealing formation of highly dispersed oxide nanoprecipitate phases at temperatures above those needed for powder consolidation and shaping of components. This would allow fabrication of net-shape parts using conventional powder-processing methods prior to thermal activation of a reaction producing nanocrystalline Y-(Ti, Zr)-O particles, with a size of 20 ± 7 nm. These results can inform processing of tubes, cladding, sheets, and plates for use in advanced fission and fusion reactors.

In-situ synchrotron X-ray diffraction↗
DOE OSTI2025

Delta/Lambda Chirality: From Enantiomers to Diastereomers in Heterometallic Complexes with Chelating Ligands

The Δ/Λ chirality observed in octahedral molecules with chelating ligands represents the major group of “chiral-at-metal” complexes. Upon shifting from mononuclear to polynuclear systems with multiple (≥2) chiral centers, not only enantiomers but also diastereomers should be considered. We present the first, to the best of our knowledge, diastereomeric pairs Δ,Δ,Δ/Λ,Λ,Λ (1) and Δ,Δ,Λ/ Λ,Λ,Δ (2) of the pentanuclear assembly [Mn II (ptac) 3 −Na- Co III (acac) 3 −Na-Mn II (ptac) 3 ] (ptac = 1,1,1-trifluoro-5,5-dimethyl- 2,4-hexanedionate; acac = acetylacetonate). Diastereomers 1 and 2 were isolated in pure form and found to exhibit distinctly different structural characteristics. Importantly, for compounds that are applied as single-source precursors for the quaternary oxide cathode material P2−Na 0.67 Mn 0.67 Co 0.33 O 2 , the diastereomers revealed different thermal behaviors in terms of volatility and thermal stability. Unambiguous assignment of the Mn and Co positions in both diastereomers has been confirmed by the synchrotron X-ray resonant diffraction technique. Oxidation states of metal ions have been verified by the synchrotron X-ray fluorescence spectroscopy. The diastereomerization between 1 and 2 is not taking place in the solid state (crystal-to-crystal), as well as in the gas phase. The transformation between two diastereomers was observed in the solutions of noncoordinating solvents and was related to the polarities of the solvents and diastereomeric molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface Energies of LaMnO 3 High-Index Surfaces Obtained from Density-Functional Theory

Here, the first six cubic LaMnO 3 high-index surfaces, (210), (211), (221), (310), (311), and (320), are examined for the first time. The unrelaxed and relaxed surface energies of the surfaces are computed as a function of surface model thickness using unrelaxed and relaxed surface models, respectively. The (210), (320), (211), and (221) surfaces are found to be more stable than the low-index (011) and (111) surfaces. Helping to explain this result, the surface terminations of the (210), (320), (211), or (221) surface are seen to exhibit a rotational relaxation of the MnO 6 or oxygen octahedra extending from the surface into the bulk. By contrast, the relaxed surface energies of the (310) and (311) surfaces are concluded to be difficult to determine due to a structural transformation or phase change in the surface models of the surfaces away from cubic LaMnO 3 . The finding of a phase change is important. It indicates that a phase change in the surface models of a surface for another material could occur if the surface is relatively open and a different phase of the material is stable at low temperature. When modeling such a surface, two steps are suggested to be taken.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ Probing Potassium-ion Intercalation-induced Amorphization in Crystalline Iron Phosphate Cathode Materials

Na-ion and K-ion batteries are promising alternatives for large-scale energy storage applications due to their abundance and low cost. Intercalation of these large ions could cause irreversible structural deformation and partial to complete amorphization in the crystalline electrodes. The designing of new amorphous electrodes is another route to develop electrodes to store these ions reversibly. Lack of understanding of dynamic changes in the amorphous nanostructures during battery operation is the bottleneck for further developments. Here, we report the utilization of in situ digital image correlation and in-operando X-ray diffraction (XRD) techniques to probe dynamic changes in the amorphous phase of iron phosphate during potassium intercalation. In-operando XRD demonstrates amorphization in the electrode’s nanostructure during the first charge/discharge cycle. Additionally, the ex-situ high-resolution transmission electron microscopy further confirms the amorphization after potassium insertion. In situ strain analysis detects the reversible deformation associated with redox reactions in the amorphous phases. Our approach offers new insights on the mechanisms of ion intercalation in the amorphous nanostructures which are highly potent for development of next-generation batteries.

Ozdogru, Bertan↗
DOE OSTI2020

Reversible Interlayer Sliding and Conductivity Changes in Adaptive Tetrathiafulvalene-Based Covalent Organic Frameworks

Ordered interlayer stacking is intrinsic in two-dimensional covalent organic frameworks (2D COFs) and has strong implications on COF's optoelectronic properties. Reversible interlayer sliding, corresponding to shearing of 2D layers along their basal plane, is an appealing dynamic control of both structures and properties, yet it remains unexplored in the 2D COF field. In this paper, we demonstrate that the reversible interlayer sliding can be realized in an imine-linked tetrathiafulvalene (TTF)-based COF TTF-DMTA. The solvent treatment induces crystalline phase changes between the proposed staircase-like sql net structure and a slightly slipped eclipsed sql net structure. The solvation-induced crystallinity changes correlate well with reversible spectroscopic and electrical conductivity changes as demonstrated in oriented COF thin films. In contrast, no reversible switching is observed in a related TTF-TA COF, which differs from TTF-DMTA in terms of the absence of methoxy groups on the phenylene linkers. This work represents the first 2D COF example of which eclipsed and staircase-like aggregated states are interchangeably accessed via interlayer sliding, an uncharted structural feature that may enable applications such as chemiresistive sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insights into the Electrochemical Oxidation and Reduction of Nickel Oxide Surfaces

Surface oxidation/reduction processes, driven by varying electrochemical potentials, can substantially impact catalyst effectiveness and, consequently, electrolyzer performance. Here, this study combines theoretical and experimental approaches to explore the surface redox behavior of nickel oxides, which are cost-effective and efficient catalysts for many electrochemical reactions. Surface Pourbaix diagrams for three different phases of nickel oxides, i.e., nickel hydroxide (Ni(OH) 2 ), nickel oxyhydroxide (NiOOH), and nickel dioxide (NiO 2 ), were constructed using density functional theory-based simulations. Various experimental methods, including cyclic voltammetry, in situ Raman spectroscopy, and electrochemical titration, were employed to probe the surface redox processes of nickel oxide thin films. Our findings indicate that the ABAB stacking sequence of Ni(OH) 2 lacks stability under oxidizing conditions to host the surface oxidation (deprotonation) events, while the AABBCC stacking sequence of NiOOH is energetically favorable due to the presence of interlayer hydrogen bonding. Rapid charge transfer facilitated by interlayer hydrogen bonding accounts for the higher reactivity of partially oxidized/reduced NiOOH (001) surfaces compared to Ni(OH) 2 (001) and NiO 2 (001) surfaces with the same stoichiometry, where interlayer hydrogen bonding is absent. Insights presented in this work can offer guidelines for optimizing operational conditions and tailoring the surface structures and oxidation states of nickel oxides to enhance performance in applications such as electrocatalysis and supercapacitors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Humidity Disrupts Structural and Chiroptical Properties of Chiral 2D Perovskites

Chiral two-dimensional (2D) hybrid organic–inorganic metal halide perovskite semiconductors have emerged as an exceptional material platform with many design opportunities for spintronic applications. However, a comprehensive understanding of changes to the crystal structure and chiroptical properties upon exposure to atmospheric humidity has not been established. We demonstrate phase degradation to the 1D (MBA)PbI 3 (MBA = methylbenzylammonium) and the hypothetical (MBA) 3 PbI 5 ·H 2 O hydrate phases, accompanied by a reduction and disappearance of the chiroptical response. Firstprinciple simulations show that water molecules preferentially locate at the interface between the organic cations and the inorganic framework, thereby disrupting the hydrogen bonding, impacting both the structural chirality and stability of the material. These findings provide critical insights into phase degradation mechanisms and their impact on chiroptical activity in chiral 2D perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

The intrinsic poor thermal stability of layered LiNi x Co y Mn 1-x-y O 2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathode, we demonstrate that, the chemical and structural stability of the deep delithiated NCM cathodes are significantly affected by Co, rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co 4+ reduces prior to the reduction of Ni 4+ , and could thus prolong the Ni migration by occupying the tetrahedra sites, and hence postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni 4+ . Our results highlight the importance of evaluating the intrinsic role of compositional tuning on Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Anomalously abrupt switching of wurtzite-structured ferroelectrics: simultaneous non-linear nucleation and growth model

Ferroelectric polarization switching is one common example of a process that occurs via nucleation and growth, and understanding switching kinetics is crucial for applications such as ferroelectric memory. Here we describe and interpret anomalous switching dynamics in the wurtzite-structured nitride thin film ferroelectrics Al 0.7 Sc 0.3 N and Al 0.94 B 0.06 N using a general model that can be directly applied to other abrupt transitions that proceed via nucleation and growth. When substantial growth and impingement occur while nucleation rate is increasing, such as in these wurtzite-structured ferroelectrics under high electric fields, abrupt polarization reversal leads to very large Avrami coefficients ( e.g., n = 11), inspiring an extension of the KAI (Kolmogorov–Avrami–Ishibashi) model. We apply this extended model to two related but distinct scenarios that crossover between (typical) behavior described by sequential nucleation and growth and a more abrupt transition arising from significant growth prior to peak nucleation rate. This work therefore provides a more complete description of general nucleation and growth kinetics applicable to any system while specifically addressing the anomalously abrupt polarization reversal behavior in new wurtzite-structured ferroelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct imaging of shock wave splitting in diamond at Mbar pressure

Understanding the behavior of matter at extreme pressures of the order of a megabar (Mbar) is essential to gain insight into various physical phenomena at macroscales—the formation of planets, young stars, and the cores of super-Earths, and at microscales—damage to ceramic materials and high-pressure plastic transformation and phase transitions in solids. Under dynamic compression of solids up to Mbar pressures, even a solid with high strength exhibits plastic properties, causing the induced shock wave to split in two: an elastic precursor and a plastic shock wave. This phenomenon is described by theoretical models based on indirect measurements of material response. The advent of x-ray free-electron lasers (XFELs) has made it possible to use their ultrashort pulses for direct observations of the propagation of shock waves in solid materials by the method of phase-contrast radiography. However, there is still a lack of comprehensive data for verification of theoretical models of different solids. Here, we present the results of an experiment in which the evolution of the coupled elastic–plastic wave structure in diamond was directly observed and studied with submicrometer spatial resolution, using the unique capabilities of the x-ray free-electron laser (XFEL). The direct measurements allowed, for the first time, the fitting and validation of the 2D failure model for diamond in the range of several Mbar. Our experimental approach opens new possibilities for the direct verification and construction of equations of state of matter in the ultra-high-stress range, which are relevant to solving a variety of problems in high-energy-density physics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Static and shock compression studies of eutectic high-entropy alloy AlCoCrFeNi 2.1 to ultrahigh pressures

The high-entropy alloy with composition AlCoCrFeNi 2.1 , additively manufactured with the laser powder-bed fusion technique, has a far-from-equilibrium BCC/FCC eutectic nanolamellar structure. We studied the high-pressure response of this alloy under both static compression and high-strain rate shock compression. The response to static compression using a diamond anvil cell was studied at pressures up to 302 GPa with synchrotron x-ray diffraction at the advanced photon source. The high-pressure FCC-only phase of the EHEA previously observed by Pope et al. [AIP Adv. 13, 035124 (2023)] is found to be stable up to the highest pressure achieved in this study with a volume compression of V/V 0 = 0.587 at ambient temperature. The shock experiments were performed by using GEKKO XII lasers at the Institute of Laser Engineering, Osaka University. The principal Hugoniot equation-of-state of the EHEA was measured up to a pressure of 515 GPa and a compression of V/V 0 = 0.613. Additionally, the thermal equation of state of the EHEA was measured up to 6.2 GPa and 1623 K using a large-volume Paris–Edinburgh cell to obtain the temperature dependence of bulk modulus and thermal expansion coefficients. The melting temperature for EHEA AlCoCrFeNi 2.1 at a pressure of 5.6 GPa was measured to be 1648 ± 25 K. These results can be used to refine stochastic (or special) quasi-random structure (SQS) models for high-pressure high-temperature behavior of high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural phase transition and manifestation of eddy currents in IR reflection spectra of PbSnTe semiconductor films

Infrared reflection spectra of thin (∼60 nm) Pb{sub 1−x} Sn{sub x}Te (x = 0.25, 0.53, 0.59) films grown by molecular beam epitaxy on GaAs/CdTe hybrid substrates have been measured at frequencies from 20 to 5500 cm{sup −1} and temperatures from 5 to 300 K. The spectra have been used to determine temperature-dependent transverse phonon and plasmon frequencies in the films, which has made it possible to identify a structural phase transition at T{sub C} ≈ 50 K. The plasma frequency of the films has been shown to increase with decreasing band gap on cooling from 300 to 77 K. The increase in plasma frequency is mainly attributable to the increase in carrier concentration and a transition of the carriers from vortex states on the film surface to the valence band. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Recovery and facets for deformation twins in minerals and metals

Type II and IV twins with irrational twin boundaries are studied by high-resolution transmission electron microscopy in two plagioclase crystals. The twin boundaries in these and in NiTi are found to relax to form rational facets separated by disconnections. The topological model (TM), amending the classical model, is required for a precise theoretical prediction of the orientation of the Type II/IV twin plane. Theoretical predictions also are presented for types I, III, V, and VI twins. The relaxation process that forms a faceted structure entails a separate prediction from the TM. Hence, faceting provides a difficult test for the TM. Analysis of the faceting by the TM is in excellent agreement with the observations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy

Low cycle fatigue of lamellar TiAl with 8.5 at.-%Nb was studied with a total strain amplitude of 0.28% at three temperatures: room temperature, 750°C and 900°C. At room temperature, the material exhibited cyclic hardening and the fracture mode was mainly interlamellar. At 750°C and 900°C, the material showed cyclic softening and the fracture mode was translamellar. The lattice strain in γ phase was almost tensile and larger tensile lattice strain in γ phase seems detrimental. Besides, the opposite direction of {201} γ and {100} α2 lead to crack propagation along α 2 /γ interfaces. B2/β o phase always suffered compressive lattice strain in the tests. Finally, the destruction of lamellar microstructure was the reason for colony refinement at 750°C and 900°C.

phase transformation↗