Performance of phase-coherent receivers preceded by bandpass limiters.
Phase error probability distribution in communication systems where bandpass limiters precede RF carrier tracking loop
Lindsey, W. C.↗
SEARCH · Engineering Papers
Results for “Phase distribution”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Behavior of the topside ionosphere during a great magnetic storm.
Magnetic storm effects on topside ionosphere electron density distribution during different phases of storm, noting enhancement and depletion of ionization
Bauer, S. J.↗
Interplanetary communications study Final report
Mathematical expression for phase and amplitude distribution in focal plane of aperture
Cohn, M.↗
Second-order perturbed distribution associated with the plasma wave echo
Plasma wave echo, observing oscillatory behavior of perturbed distribution with different phases and amplitudes
Nishikawa, K.↗
Particle distribution functions in modulation theory
Development of a simple formulation of the cosmic ray modulation problem which involves the use of the omnidirectional part of the distribution function in phase space, and the magnitude of the momentum or the rigidity. It is shown that, by employing the proposed formulation, the Compton-Getting factor is greatly simplified, and the well-known force-field equation is reduced to a one-dimensional Vlasov equation. In addition, another Vlasov equation can be written for the very low energy galactic particles which are convected by the solar wind.
Forman, M. A.↗
The prediction of rotor rotational noise using measured fluctuating blade loads
In tests conducted at the NASA Langley Research Center Helicopter Rotor Test Facility, simultaneous measurements of the high-frequency fluctuating aerodynamic blade loads and far-field radiated noise were made on a full-scale, nontranslating rotor system. After their characteristics were determined, the measured blade loads were used in an existing theory to predict the far-field rotational noise. A comparison of the calculated and measured rotational noise is presented with specific attention given to the effect of blade loading coefficients, chordwise loading distributions, blade loading phases, and observer azimuthal position on the predictions.
Hosier, R. N.↗
Mossbauer spectroscopic study of Luna 16 lunar regolith
Samples of bulk fractions of lunar regolith from the surface layer A and the deep layer V were measured by Mossbauer spectroscopy with the FE57 nucleus. Metallic iron, ilmenite, olivine, pyroxene (mainly augite), and glasses were found. The iron distribution by mineral phases indicates that Luna 16 regolith differs from Apollo 11 regolith by a lower ilmenite content and a greater amount of olivine, and differs from Apollo 12 regolith by somewhat more olivine. No appreciable amount of iron was found in the trivalent state.
Malysheva, T. V.↗
Helicopter rotor rotational noise predictions based on measured high-frequency blade loads
In tests conducted at the Langley helicopter rotor test facility, simultaneous measurements of up to 200 harmonics of the fluctuating aerodynamic blade surface pressures and far-field radiated noise were made on a full-scale nontranslating rotor system. After their characteristics were determined, the measured blade surface pressures were converted to loading coefficients and used in an existing theory to predict the far-field rotational noise. A comparison of the calculated and measured noise shows generally good agreement up to 300 to 600 Hz, depending on the discreteness of the loading spectrum. Specific attention is given to the effects of the blade loading coefficients, chordwise loading distributions, blade loading phases, and observer azimuthal position on the calculations.
Hosier, R. N.↗
Flight evaluation: Ohio University omega receiver base
A flight evaluation is presented of the Ohio University Omega Receiver Base, developed under the NASA Tri-University Program in Air Transportation, to provide a vehicle for the transfer of flight-test data to NASA and to other participants in the Tri-University program. Chart recordings of flight data are given, along with chronological listings of significant events which occurred during the flight. Digital data was prepared in data-processing card form for distribution. Data include phase measurements from all eight Omega time-slots for the duration of the flight, plus event marks which serve to correlate the phase data with flight-path documentation.
Chamberlin, K. A.↗
Solid-liquid phase transition in argon
Starting from the Lennard-Jones interatomic potential, a modified cell theory has been used to describe the solid-liquid phase transition in argon. The cell-size variations may be evaluated by a self-consistent condition. With the inclusion of cell-size variations, the transition temperature, the solid and liquid densities, and the liquid-phase radial-distribution functions have been calculated. These ab initio results are in satisfactory agreement with molecular-dynamics calculations as well as experimental data on argon.
Tsang, T.↗
The Shaw meteorite - History of a chondrite consisting of impact-melted and metamorphic lithologies
Three intermingled lithologies are identified in the Shaw L-group chondrite: a light-colored lithology with a poikilitic texture, consisting of olivine and augite crystals surrounded by larger orthopyroxene grains; a dark-colored lithology containing remnant chondrules and exhibiting a microgranular texture; and a gray lithology which appears to be intermediate between the other two. Contrary to published opinions, the Shaw meteorite contains normal L-group chondrite abundances of metal and troilite, though these phases are irregularly distributed. The lithological analyses suggest that 4.52 Byr ago an impact took place on the L-group chondrite parent object of Shaw.
Taylor, G. J.↗
SPS phase control studies
To properly point and form the SPS microwave power beam, the outputs of the power amplifiers in the transmitting array must be phased in a specific and coherent fashion. The purpose of the SPB phase control system is to bring this about reliably. A number of different phase control schemes were studied. The one selected for the SPS baseline system is a retrodirective CW phase that is distributed via fiber optics. The basis of this selection is relative technical simplicity and requisite assurance of success.
Lund, W. W.↗
Phased-array-fed antenna configuration study, volume 2
Increased capacity in future satellite systems can be achieved through antenna systems which provide multiplicity of frequency reuses at K sub a band. A number of antenna configurations which can provide multiple fixed spot beams and multiple independent spot scanning beams at 20 GHz are addressed. Each design incorporates a phased array with distributed MMIC amplifiers and phasesifters feeding a two reflector optical system. The tradeoffs required for the design of these systems and the corresponding performances are presented. Five final designs are studied. In so doing, a type of MMIC/waveguide transition is described, and measured results of the breadboard model are presented. Other hardware components developed are described. This includes a square orthomode transducer, a subarray fed with a beamforming network to measure scanning performance, and another subarray used to study mutual coupling considerations. Discussions of the advantages and disadvantages of the final design are included.
Sorbello, R. M.↗
Development of powder metallurgy 2XXX series Al alloys for high temperature aircraft structural applications
The objective of the present investigation was to improve the strength and fracture toughness combination of P/M 2124 Al alloys in accordance with NASA program goals for damage tolerance and fatigue resistance. Two (2) P/M compositions based on Al-3.70 Cu-1.85 Mg-0.20 Mn with 0.12 and 0.60 wt. pct. Zr were selected for investigation. The rapid solidification rates produced by atomization were observed to prohibit the precipitation of coarse, primary Al3Zr in both alloys. A major portion of the Zr precipitated as finely distributed, coherent Al3Zr phases during vacuum preheating and solution heat treatment. The proper balance between Cu and Mg contents eliminated undissolved, soluble constituents such as Al2CuMg and Al2Cu during atomization. The resultant extruded microstructures produced a unique combination of strength and fracture toughness. An increase in the volume fraction of coherent Al3Zr, unlike incoherent Al20Cu2Mn3 dispersoids, strengthened the P/M Al base alloy either directly by dislocation-precipitate interactions, indirectly by a retardation of recrystallization, or a combination of both mechanisms. Furthermore, coherent Al3Zr does not appear to degrade toughness to the extent that incoherent Al20Cu2Mn3 does. Consequently, the addition of 0.60 wt. pct. Zr to the base alloy, incorporated with a 774K (935 F) solution heat treatment temperature, produces an alloy which exceeds all tensile property and fracture toughness goals for damage tolerant and fatigue resistant applications in the naturally aged condition.
Chellman, D. J.↗
Quantitative modeling of the 'convection surge' mechanism of ion acceleration
To explore the properties of the 'convection surge' mechanism postulated by Quinn and Southwood (1982), a quantitative computer model of the mechanism is constructed. The model incorporates the dipolarization of the field line shapes as well as the results of recent transient electric field measurements by the AST-6 satellite. The computer model numerically integrates the equations of motion of ensembles of ions populating a single flux tube that goes through the convection surge or 'dipolarization' transformation. The numerical results confirm that the mechanism easily generates the bounce-phase-bunched ion distributions in question, and show that the convection surge can generate dramatically field-aligned ion distributions. It is hypothesized that the convection surge mechanism is fundamentally associated with the processes responsible for transporting tail ion populations to the geosynchronous regions of the earth's magnetosphere.
Mauk, B. H.↗
A new approach for shaping of dual-reflector antennas
The shaping of 2-D dual-reflector antenna systems to generate a prescribed distribution with uniform phase at the aperture of the second reflector is examined. This method is based on the geometrical nature of Cassegrain and Gregorian dual-reflector antennas. The method of syntheses satisfies the principles of geometrical optics which are the foundations of dual-reflector designs. Instead of setting up differential equations or heuristically designing the subreflector, a set of algebraic equations is formulated and solved numerically to obtain the desired surfaces. The caustics of the reflected rays from the subreflector can be obtained and examined. Several examples of 2-D dual-reflector shaping are shown to validate the study. Geometrical optics and physical optics are used to calculate the scattered fields from the reflectors.
Lee, Teh-Hong↗
Optically controlled phased-array antenna technology for space communication systems
Using MMICs in phased-array applications above 20 GHz requires complex RF and control signal distribution systems. Conventional waveguide, coaxial cable, and microstrip methods are undesirable due to their high weight, high loss, limited mechanical flexibility and large volume. An attractive alternative to these transmission media, for RF and control signal distribution in MMIC phased-array antennas, is optical fiber. Presented are potential system architectures and their associated characteristics. The status of high frequency opto-electronic components needed to realize the potential system architectures is also discussed. It is concluded that an optical fiber network will reduce weight and complexity, and increase reliability and performance, but may require higher power.
Kunath, Richard R.↗
Cirrus microphysics and infrared radiative transfer: A case study
Coincident measurements of cirrus cloud microphysical properties such as particle size distribution and particle shape and morphology, and measurements of infrared intensity and flux were made. Data was acquired nearly simultaneously in space and time by a KingAir in cloud and by an ER-2 at an altitude of 19 km. Upwelling infrared intensities and fluxes measured from the ER-2 and observations of cloud particle size distributions and particle phase and morphology made from the KingAir are discussed. Broad-band flux measurements were available both in and below the cirrus layer from the KingAir.
Ackerman, Thomas P.↗