SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The possibility of using geostationary platforms to provide communications and other services was examined. Detailed data on the payload and housekeeping requirements of selected communications missions and one typical noncommunications mission are presented.
The most prominent payload integration methods are presented and evaluated. The paper outlines the problem and some of the difficulties encountered when analyzing a coupled booster/payload system. Descriptions of both full-scale and short-cut methods are given together with an assessment of their strengths and weaknesses. Finally, an extensive list of references is included.
The Spacelab Payload Standard Modular Electronics (SPSME) program has been designed to provide a standardized set of space-qualified low-power electronic modules from which an experimenter may economically implement a command and data management system. SPSME is based on the Computer Automated Measurement and Control (CAMAC) interface standards. To the system of CAMAC, SPSME adds Spacelab interface modules, a flight qualified system crate, and an efficient light-weight power supply to produce a system compatible with the Spacelab environments, the Spacelab Command and Data Management System interface, and any experiment.
A pumped two-phase (heat absorption/heat rejection) thermal transport system for orbiting instrument payloads is investigated. The thermofluid characteristics necessary for the system design are discussed. A preliminary design with a series arrangement of four instrument heat stations and six radiators in a single loop is described in detail, and the total mass is estimated to be 134 kg, with the radiators, instrument heat stations, and fluid reservoir accounting for approximately 86, 24, and 12 kg, respectively. The evaluation of preliminary test results shows that the system has potential advantages; however, further research is necessary in the areas of one-g and zero-g heat transfer coefficients/fluid regimes, fluid by-pass temperature control, and reliability of small pumps.
Space shuttle, the most complex transportation system designed to date, illustrates the requirement for an analysis approach that considers all major disciplines simultaneously. Its unique cross coupling and high sensitivity to aerodynamic uncertainties and high performance requirements dictated a less conservative approach than those taken in programs. Analyses performed for the space shuttle and certain payloads, Space Telescope and Spacelab, are used a examples. These illustrate the requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements control requirements and the resulting design verification approaches. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.
The achievement of an optimized design from the system standpoint under the low cost, high risk constraints of the present day environment was analyzed. Space Shuttle illustrates the requirement for an analysis approach that considers all major disciplines (coupling between structures control, propulsion, thermal, aeroelastic, and performance), simultaneously. The Space Shuttle and certain payloads, Space Telescope and Spacelab, are examined. The requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements, control requirements, and the resulting design verification approaches are illustrated. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.
Data are presented covering (1) scheduled launch month and orbiter vehicle, (2) the inclination of the orbit and the altitude in nautical miles, (3) the number of crew members and the duration of the mission, (4) the payload, and (5) the carrier.
Stability and robustness of a two-level control system for large space structures were investigated. In particular, the effects of actuator/sensor nonlinearities and dynamics on the closed-loop stability were studied and the problem of control-systems design for fine-pointing of several individually pointed payloads mounted on a large space platform was examined. A composite controller is proposed and is stable and robust.
The launching of deep space payloads via the Space Shuttle vehicle of the Space Transportation System, rather than via expendable launch vehicles, is described. Changes in procedures and data flow configurations for both the flight project and DSN during the launch period are required. A typical Galileo launch period sequence of events and telemetry and command data flow configurations are described.
A design concept that will implement a mapping capability for the Orbital Camera Payload System (OCPS) when ground control points are not available is discussed. Through the use of stellar imagery collected by a pair of cameras whose optical axis are structurally related to the large format camera optical axis, such pointing information is made available.
This paper discusses distortion of digital signals generated in the Space Shuttle Ku-band communications systems. Specifically, the degradation considered is due to coaxial cables which interface data and clock from a source located in the payload bay to the KuSPA (Ku-Band Signal Processor Assembly) located in the avionics bay of the Shuttle. Due to the length (nearly 100 feet) and relatively narrow bandwidth of the cable, the clock and data waveforms are significantly affected by this transmission medium. This paper presents a closed form model that closely approximates the distortion of the waveforms measured in laboratory tests.
The coupled equations of motion of a system composed of a launch vehicle and multiple payloads are derived. In the process, it is shown how superfluous interface degrees of freedom on the booster side can be accommodated in the formulation. The discrete system equations are directly integrated, avoiding the solution of an expensive system eigenvalue problem. A modified Newmark-Chan-Beta numerical integration scheme is used to obtain the response. The unique form of the equations of motion allow for a quick and accurate solution both for the response and the internal loads. Although completely general, the presented technique is most effective when the number of interface degrees of freedom is relatively small compared to the overall number of degrees of freedom of the system. The technique is applied to the case of the S.T.S.-S.T.-OMS Kit system. Finally, an evaluation of the presented method is included.
The qualification, operation, and results from the first Office of Science and Technology Assessment payload, flown on board the second Shuttle mission, are detailed. Among the experiments were a Shuttle Imaging Radar-A, which recorded 1000 m of 70 mm film of 50 km swaths of the earth's land and ocean surface. The multispectral IR radiometer permitted the acquisistion of 400,000 ten-channel spectral over the wavelength interval 0.5-2.35 microns, including rock and soil identifications which are correlated with economically significant geologic materials. The ocean color experiment involved an eight channel optical mechanical scanner to detect ocean water color changes due to the presence of phytoplankton. Air pollution was measured by radiometer in the 4.50-4.83 micron regions, and an asymmetry in CO concentration was found between the northern and sourthern hemispheres. Only five seconds of surface and meteorological data were collected by the FILE package, while the one successfully used film cassette on a lightning recording experiment revealed discharges among convective storm systems. A rerunning of unsuccessful experiments and new instrumentation for future Shuttle missions are indicated.
This paper presents a sampling of space science missions currently planned or under study at the Jet Propulsion Laboratory. Early use of the Shuttle for launching planetary exploration missions will not differ very much in principle from expendable launch vehicles. Future concepts which make use of the unique characteristics of the Shuttle in conjunction with other new technology open some truly fascinating prospects. Shuttle has other roles in space science as well, both for deep space and earth-directed observations. A variety of payload concepts, ranging from highly conventional to 'far-out', are under study. Increasing experience with Shuttle operations will broaden the spectrum of possibilities.
An attitude control system was designed permitting large angle acquisition and alignment of the principle axis of a spinning payload to within 1 degree of the earth's magnetic field. Signals from magnetometer and gyro sensors are fed to the control algorithm to generate commands for the jet thrusters. The algorithm contains a cross axis magnetometer signal to prevent a large angle magnetometer signal to prevent a large angle equilibrium solution. The acquisition will occur within 50 seconds from initial precession and nutation angles of 30 degrees. An electronic spin filter passes signals at spin and nutation frequencies and rejects bias signals due to sensor misalignment and principle axis offset. Describing function analysis and total analog simulation techniques were used. The flight ACS hardware was interfaced with the analog computer simulation for design and verification. The controller has flown on four successful missions.
Partial-payload support structure (PPSS) is modular, bridge like structure supporting experiments weighing up to 2 tons. PPSS handles such experiments more economically than standard Spacelab pallet system.
The development of a training program for the intravehicular operation of space shuttle payloads is discussed. The priorities for the program are compliance with established training standards, and accommodating changes. Simulation devices are also reviewed.
This User Guide with an overview of an integration scheme to determine the response of a launch vehicle with multiple payloads. Chapter II discusses the software package associated with the integration scheme together with several sample problems. A short cut version of the integration technique is also discussed. The Guide concludes with a list of references and the listings of the subroutines.