Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Analysis and design of fast flow liquid Li divertor for fusion nuclear science facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes *

The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the fusion nuclear science facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density ($n^{OMP}_{e,sep}$~1× 10 20 m -3 ) and divertor energy flux ($q^{Odiv}_{\bot,max}$<10 MW m -2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately ~525 °C, corresponding emitted Li fluxes of up to φ Li ~2X10 23 atoms s -1 . Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (<525 °C), with simulation results indicating a minor impact on the divertor and upstream plasma. Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (>525 °C), contaminating both the divertor and upstream plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Boundary-induced effect on the spoke-like activity in E × B plasma

The spoke instability in an E × B Penning discharge is shown to be strongly affected by the boundary that is perpendicular to B field lines. The instability is the strongest when bounded by dielectric walls. With a conducting wall, biased to collect electron current from the plasma, the spoke becomes faster, less coherent, and localized closer to the axis. The corresponding anomalous cross-field transport is assessed via simultaneous time-resolved measurements of plasma potential and density. Here, this shows a dominant large-scale E × B anomalous character of the electron cross-field current for dielectric walls reaching 40%–100% of the discharge current, with an effective Hall parameter β eff ~10. The anomalous current is greatly reduced with the conducting boundary (characterized by β eff ~ 10 2 ). These experimental measurements are shown to be qualitatively consistent with the decrease in the E field that triggers the collisionless Simon-Hoh instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shuttle tethered satellite program

Features and applications of the Shuttle tethered satellite system (TSS) are outlined. The TSS would be mounted on a normal cargo pallet and used to deploy or retrieve payloads weighing up to 500 kg from the Orbiter by reeling in or unreeling a tether line extended along the gravity gradient vertical. Attaching a conducting wire to the tether would permit electrodynamic measurements of space plasma. An initial mission under development is to deploy an instruments package 20 km above the Orbiter with a conducting wire tether, thereby obtaining data on low frequency hydromagnetic waves generated by tether passage through the space plasma. An aerodynamics package could also be lowered to 130 km, where measurements can be made with magnetometers for geoscience data, atmospheric composition, and cosmic dust can be collected. Details of engineering assignments for the TSS divided up between NASA and the Italian National Research Council are discussed.

Nolan, M. B.↗

Temporal study of wake formation behind a conducting body

The temporal evolution of the wake of a conducting body is studied experimentally in a pulsed plasma device. Three-dimensional measurements of the plasma potential, density, particle energy distribution, and ion currents are measured throughout the near- and mid-wake regions during the wake formation. It is found that the potential behind the conducting body is initially negative. This negative potential is caused by the higher mobility of the electrons, allowing them to flow into the ion free wake region. The negative potential in the wake region induces an electric field that pulls ions into the region behind the conducting body. However, the dominant factor in determining the length of the near wake is the thermal energy spread of the ions. At later times, as the sheath forms around the conducting body, ions are deflected by the potential gradient in the sheath region. This deflection, in addition to the thermal energy spread of the ions, determines the length of the near wake.

Meassick, S.↗

Anisotropy induced wave birefringence in bounded supercritical plasma confined in a multicusp magnetic field

Laboratory observation of rotation of the polarization axis ({theta}{sub c{approx}}20 deg. - 40 deg. with respect to vacuum) of a penetrating electromagnetic wave through a bounded supercritical plasma (plasma frequency {omega}{sub p}>wave frequency {omega}), confined in a multicusp magnetic field is reported. Birefringence of the radial and polar wave electric field components (E{sub r} and E{sub {theta}}) has been identified as the cause for the rotation, similar to a magneto-optic medium, however, with distinct differences owing to the presence of wave induced resonances. Numerical simulation results obtained by solving the Maxwell's equations by incorporating the plasma and magnetostatic field inhomogeneities within a conducting boundary shows a reasonable agreement with the experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A magnetohydrodynamic theory for the lunar response to time variations in a spatially uniform ambient magnetic field

An analytic theory based on principles of magnetohydrodynamics is derived for interpreting the lunar magnetic response to magnetic field fluctuations in the lobes of the geomagnetic tail. Only the case of magnetic perturbations parallel to a spatially uniform ambient magnetic field is treated. The theoretical frequency-dependent MHD transfer function depends on both the lunar electrical conductivity profile and the Alfven speed of the tail lobe plasma. For circular frequencies much less than the Alfven speed/lunar radius, the MHD transfer function reduces to the vacuum transfer function, while at higher frequencies the finite propagation speed of magnetic disturbances affects the response. These characteristics of the MHD transfer function are in qualitative agreement with observation. A carefully selected set of magnetic field transient events could be used together with this theory to infer lunar electrical conductivity profiles and the tail lobe plasma density (via its dependence on the Alfven speed).

Hood, L. L.↗

Localized mix-induced radiative cooling in a capsule implosion at the National Ignition Facility

In this work, w present direct measurements of electron temperature variations within an inertially confined deuterium-tritium plasma caused by localized mix of higher-Z materials into the central hot spot. The data are derived from newly developed differentially filtered penumbral imaging of the bremsstrahlung continuum emission. Our analysis reveals distinct localized emitting features in the stagnated hot-spot plasma, and we infer spatial variations in the electron temperature: the mixed region is 660±130eV colder than the surrounding hot-spot plasma at 3.26±0.11keV. Our analysis of the energy flow shows that we measure approximately steady-state conditions where the radiative losses in the mix region are balanced by heat conduction from the surrounding hot deuterium-tritium plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

UCB current detector experiment on Swedish auroral payloads

A split Langmuir probe has been developed to make in situ measurements of ionospheric current density and plasma bulk flow. The probe consists of two conducting elements that are separated by a thin insulator that shield each other over a 2 pi solid angle, and that are simultaneously swept from negative to positive with respect to the plasma. By measuring the current to each plate and the difference current between plates, information is obtained on the plasma's current density, bulk flow, electron temperature, and density. The instrument was successfully flown twice on sounding rockets into auroral events. Measurement data indicate that the total auroral current configuration is composed of several alternating east and west electrojets associated with several alternating up and down Birkeland currents.

Mozer, F.↗

ROTATING SOLAR JETS IN SIMULATIONS OF FLUX EMERGENCE WITH THERMAL CONDUCTION

We study the formation of coronal jets through numerical simulation of the emergence of a twisted magnetic flux rope into a pre-existing open magnetic field. Reconnection inside the emerging flux rope in addition to that between the emerging and pre-existing fields give rise to the violent eruption studied. The simulated event closely resembles the coronal jets ubiquitously observed by the X-Ray Telescope on board Hinode and demonstrates that heated plasma is driven into the extended atmosphere above. Thermal conduction implemented in the model allows us to qualitatively compare simulated and observed emission from such events. We find that untwisting field lines after the reconnection drive spinning outflows of plasma in the jet column. The Poynting flux in the simulated jet is dominated by the untwisting motions of the magnetic fields loaded with high-density plasma. The simulated jet is comprised of ''spires'' of untwisting field that are loaded with a mixture of cold and hot plasma and exhibit rotational motion of order 20 km s{sup –1} and match contemporary observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Design and development of the magnetic diagnostic systems for the first operational phase of the SMART tokamak

A set of magnetic diagnostics has been designed, manufactured, and calibrated for the first operational phase of the small aspect ratio tokamak. The sensor suite comprises of Rogowski coils; 2D magnetic probes; and poloidal, saddle, and diamagnetic flux loops. Here, a set of continuous Rogowski coils has been manufactured for the measurement of plasma current and induced eddy currents in conductive elements. A set of flux loops and magnetic probes will be used as input for the reconstruction of the magnetohydrodynamic equilibrium. The quantity and position of these sensors have been verified to be sufficient with synthetic equilibrium reconstructions using the equilibrium fitting code and baseline scenarios computed with the Fiesta code. These sensors will also be used as input for the real-time control system, and magnetic probes will be used for the detection of plasma instabilities. The calibration procedure for the magnetic probes is described, and the results are shown. The signal conditioning and data acquisition systems are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Latest innovations in large area web coating technology via plasma enhanced chemical vapor deposition source technology

In this article, the authors discuss the latest results of our development of large area plasma enhanced chemical vapor deposition (PECVD) source technologies for flexible substrates. A significant challenge is the economical application of thin films for use as vapor barriers, transparent conductive oxides, and optical interference thin films. Here at General Plasma the authors have developed two innovative PECVD source technologies that provide an economical alternative to low temperature sputtering technologies and enable some thin film materials not accessible by sputtering. The Penning Discharge Plasma (PDP trade mark sign ) source is designed for high rate direct PECVD deposition on insulating, temperature sensitive web [J. Modocks, Proceedings of the Society of Vacuum Coaters, 2003 (unpublished), p. 187]. This technology has been utilized to deposit SiO{sub 2} and SiC:H for barrier applications [V. Shamamian et al. Proceedings of the Flexible Displays and Manufacturing Conferrence, 2006 (unpublished)]. The Plasma Beam Source (PBS trade mark sign ) is a remote plasma source that is more versatile for deposition on not only insulating flexible substrates but also conductive or rigid substrates for deposition of thin films that are sensitive to the high ion bombardment flux inherent to the PDP trade mark sign technology. The authors have developed PBS thin film processes in our laboratory for deposition of SiO{sub 2}, SiC:O, SiN:C, SiN:H, ZnO, FeO{sub x}, and Al{sub 2}O{sub 3}. [M. A. George, Conference Proceedings of the Association of Industrial Metallizers, Coaters, and Laminators (AIMCAL), 2007 (unpublished)]. The authors discuss the design of the patented sources, plasma physics, and chemistry of the deposited thin films.

36 MATERIALS SCIENCE↗

Multidimensional modeling of non-equilibrium plasma generated by a radio-frequency corona discharge

Low-temperature plasma (LTP) ignition concepts rely on the production of radical and charged species to speed up the onset of combustion in spark-ignition engines. These features are responsible for the superior performance of LTP igniters under extremely dilute combustion operation that is not achievable by conventional spark igniters. Additionally, LTP discharges extend the lifetime of the igniters, due to the avoidance of spark processes. For these reasons, the engine research community and the automotive industry have shown growing interest in this technology in the recent years. As of today, computational fluid-dynamics (CFD) codes typically used by the multi-dimensional engine modeling community do not have reliable models to describe LTP ignition processes. One key missing piece of information is the physical and chemical properties of the plasma and their effect on combustion ignition. Most non-equilibrium plasma simulations reported in literature are based on simplified, canonical geometries, with simple discharge excitation schemes. Here we conduct multi-dimensional modeling of the non-equilibrium plasma generated by an application-relevant radio-frequency (RF) corona discharge in air. Three test cases are simulated, characterized by different environmental pressure levels and peak electrode voltage values at room temperature. Streamer penetration, electron number density, atomic oxygen production, and bulk gas temperature distribution in the first 10 sinusoidal pulses are presented and discussed. This model can be used as a key tool for an in-depth understanding of RF-corona discharge for automotive applications and provides the basis for future implementations of dedicated LTP ignition models in CFD codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polymeric Coatings for Electrodynamic Tethers

Two polymeric coatings have been developed for the Propulsive Small Expendable Deployer System (ProSEDS) mission. ProSEDS is designed to provide an on-orbit demonstration of the electrodynamic propulsion capabilities of tethers in space. The ProSEDS experiment will be a secondary payload on a Delta II unmanned expendable booster scheduled for launch in August 2000. A 5-km conductive tether is attached to the Delta 11 second stage and collects current from the low Earth orbit (LEO) plasma to facilitate de-orbit of the spent stage. The conductive tether is attached to a 10-km non-conductive tether, the other end of which is attached to an endmass containing several scientific instruments. A bare metal tether would have the best conductivity but thermal concerns preclude this design. A conductive polymer developed by Triton Systems has been optimized for conductivity and thermo-optical properties. The current design for the ProSEDS conductive tether is seven strands of 28 AWG aluminum wire individually coated with 8.7 micrometers (0.35 mil) of an atomic oxygen-resistant conductive polymer composed of a mixture of 87% Clear Oxygen-Resistant polymer (COR) and 13% polyanaline (PANi), wrapped around a braided Kevlar (TM) 49 core. Extensive testing has been performed at the Marshall Space Flight Center (MSFC) to qualify this material for flight on ProSEDS. Atomic oxygen exposure was performed, with solar absorptance and infrared emittance measured before and after exposure. Conductivity was measured before and after atomic oxygen exposure. High voltage tests, up to 1500 V, of the current collecting ability of the COR/PANi have been completed. Approximately 160 meters of the conductive tether closest to the Delta 11 second stage is insulated to prevent any electron reconnection to the tether from the plasma contactor. The insulation is composed of polyimide overcoated with TOR-BP, another polymeric coating developed by Triton for this mission. TOR-BP acts as both insulator and a protective coating against atomic oxygen erosion. The insulation has been tested to withstand 5000 V.

Vaughn, Jason A.↗

Ambipolar and non-ambipolar diffusion in an rf plasma source containing a magnetic filter

By placing a magnetic filter across a rectangular plasma source (closed at one end with a ceramic plate and an rf antenna, and terminated at the opposite end by a grounded grid), we experimentally investigate the effect of conducting and insulating source walls on the nature of the plasma diffusion phenomena. The use of a magnetic filter creates a unique plasma, characterized by a high upstream electron temperature (T{sub e{sub u}}∼5 eV) near the rf antenna and a low downstream electron temperature (T{sub e{sub d}}∼1 eV) near the grid, which more clearly demonstrates the role of the source wall materials. For conducting walls a net ion current to ground is measured on the grid, and the plasma potential is determined by a mean electron temperature within the source. For insulating walls the plasma potential is determined by the downstream electron temperature (i.e., V{sub p}∼5.2T{sub e{sub d}} in argon), and the net current to the grid is exactly zero. Furthermore, by inserting a small additional upstream conductor (that can be made floating or grounded through an external circuit switch), we demonstrate that the plasma potential can be controlled and set to a low (V{sub p}∼5.2T{sub e{sub d}}), or high (V{sub p}∼5.2T{sub e{sub u}}) value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrostatic antenna space environment interaction study

The interactions of the electrostatic antenna with the space environment in both low Earth orbit and geosynchronous orbit are investigated. It is concluded that the electrostatically controlled membrane mirror is a viable concept for space applications. However, great care must be taken to enclose the high voltage electrodes in a Faraday cage structure to separate the high voltage region from the ambient plasma. For this reason, metallized cloth is not acceptable as a membrane material. Conventional spacecraft charging at geosynchronous orbit should not be a problem provided ancillary structures (such as booms) are given nonnegligible conductivity and adequate grounding. Power loss due to plasma electrons entering the high field region is a potentially serious problem. In low earth orbit any opening whatever in the Faraday cage is likely to produce an unacceptable power drain.

Katz, I.↗

The collapse of the local, Spitzer-Haerm formulation and a global-local generalization for heat flow in an inhomogeneous, fully ionized plasma

The breakdown of the classical (CBES) field aligned transport relations for electrons in an inhomogeneous, fully ionized plasma as a mathematical issue of radius of convergence is addressed, the finite Knudsen number conditions when CBES results are accurate is presented and a global-local (GL) way to describe the results of Coulomb physics moderated conduction that is more nearly appropriate for astrophysical plasmas are defined. This paper shows the relationship to and points of departure of the present work from the CBES approach. The CBES heat law in current use is shown to be an especially restrictive special case of the new, more general GL result. A preliminary evaluation of the dimensionless heat function, using analytic formulas, shows that the dimensionless heat function profiles versus density of the type necessary for a conduction supported high speed solar wind appear possible.

Scudder, J. D.↗

One-dimensional radiation-hydrodynamic scaling studies of imploding spherical plasma liners

One-dimensional radiation-hydrodynamic simulations are performed to develop insight into the scaling of stagnation pressure with initial conditions of an imploding spherical plasma shell or ''liner.'' Simulations reveal the evolution of high-Mach-number (M), annular, spherical plasma flows during convergence, stagnation, shock formation, and disassembly, and indicate that cm- and {mu}s-scale plasmas with peak pressures near 1 Mbar can be generated by liners with initial kinetic energy of several hundred kilo-joules. It is shown that radiation transport and thermal conduction must be included to avoid non-physical plasma temperatures at the origin which artificially limit liner convergence and, thus, the peak stagnation pressure. Scalings of the stagnated plasma lifetime ({tau}{sub stag}) and average stagnation pressure (P{sub stag}, the pressure at the origin, averaged over {tau}{sub stag}) are determined by evaluating a wide range of liner initial conditions. For high-M flows, {tau}{sub stag} {approx} {Delta}R/v{sub 0}, where {Delta}R and v{sub 0} are the initial liner thickness and velocity, respectively. Furthermore, for argon liners, P{sub stag} scales approximately as v{sub 0}{sup 15/4} over a wide range of initial densities (n{sub 0}) and as n{sub 0}{sup 1/2} over a wide range of v{sub 0}. The approximate scaling P{sub stag} {approx} M{sup 3/2} is also found for a wide range of liner-plasma initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗