Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Insight into the interfacial microstructure and chemistry of hot isostatically pressed AA6061-AA6061 bonds for U-10Mo fuel cladding application

Here, in the present study, hot isostatic pressing (HIP) bonding was carried out using AA6061-AA6061 plates for U-10Mo monolithic fuel cladding application. HIP was performed at 560°C with an applied isostatic pressure of 103 MPa for 90 min. Interfacial microstructure characterizations were performed using scanning electron microscopy (SEM) combined with electron backscatter diffraction (EBSD) to quantify precipitate fractions and study recrystallization, grain growth, and orientation relationships across the interface. EBSD results confirmed that no interfacial grain growth occurred during the HIP process. Transmission electron microscopy (TEM) was also employed to quantify composition and identify phases of various precipitates and an oxide layer that formed at the interface during HIP bonding. Microstructural analyses revealed the formation of a large fraction of Mg 2 Si precipitate and a ~50 nm thick Mg-oxide layer at the interface. Further TEM analysis confirmed that the oxide layer was not continuous, and Mg 2 Al 2 O 5 oxide particles with an average size of 18 nm were present in the oxide layer. Finite element modeling analysis was performed to study the stress distribution at the interface during HIP processing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Numerical Simulation of Biogenic Fluid Catalytic Cracking (BFCC) Regenerators at Different Scales with MFIX-Exa

Catalytic Fast Pyrolysis (CFP) is a process that converts biomass into liquid intermediates suitable for transportation fuels by rapidly heating it in the presence of a catalyst, aiming to produce stable oils with reduced oxygen content. During CFP, the catalyst can become deactivated by the accumulation of coke, a carbon-rich deposit formed from the decomposition of biomass components. Unlike in petroleum refining, regenerating coked catalysts from biomass pyrolysis requires specific approaches due to the different chemical nature of the coke formed. An experimental technique, Temperature Programmed Oxidation (TPO), was used to study the de-coking process by gradually increasing temperature while monitoring the production of CO and CO2, which provides data for kinetic modeling. Utilizing data from TPO experiments, coke combustion kinetic model was developed to describe the rate of coke removal at different temperatures, allowing for simulation of regeneration processes. Then kinetic model is integrated into MFIX-Exa for the simulation of Biogenic Fluid Catalytic Cracker (BFCC) regenerator at different scales, enabling analysis of catalyst flow, temperature distribution, and regeneration efficiency under various operating conditions.

biogenic fluid catalytic cracking↗
DOE OSTI2023

Substrate Effects When Using Photons to Make Perovskite Solar Cells

To shorten annealing time and minimize substrate heating, flash lamps that deliver short, intense light pulses, commonly called photonic curing, are used to replace thermal annealing using hot plates or ovens. This method is different from equilibrium heating in that the radiant energy is selectively absorbed by the film. The high-intensity light pulses produce a high peak temperature in the film. Because most processes follow Arrhenius behavior, reaching high temperatures allow chemical reactions/phase transformations to occur in a short time, significantly reducing the processing time. Often the results are non-intuitive. We will present fabricating flexible halide perovskite solar cells (PSCs) on indium tin oxide (ITO) coated Willow glass. The effect of ITO transmittance on the photonic curing of nickel nitrate sol-gel precursors into nickel oxide to fabricate hole transport layer and consequently the performance of PSCs. Unexpectedly, ITO samples processed by photonic curing show improved optical and electrical properties.

14 SOLAR ENERGY↗
DOE OSTI2024

Electrochemical Investigation of Moisture Byproducts in Molten Calcium Chloride

Residual water in molten CaCl 2 reacts to form different byproducts, such as HCl, which can impact the corrosivity of the salt and efficiency of electrochemical operations, such as electrolytic oxide reduction and electrorefining. The ability to detect and quantify these byproducts electrochemically can provide feedback on the efficacy of vacuum drying and other purification methods, as well as the impact of these byproducts on process operations. An electrochemical signal’s association with the production of H 2 is verified and characterized using cyclic voltammetry (CV) and residual gas analysis. CV estimated a 2-electron exchange process associated with H 2 production. CV detected trace quantities of an oxidized species containing hydrogen in the salt on the order of 10 ppm. Different salt handling methods were compared for their impact on the hydrogen electrochemical signal. It was found that 30 min of exposure of CaCl 2 in a beaker to low-humidity air (<20%) had minimal impact on the H 2 production signal.

Electrochemistry↗
DOE OSTI2023

Selective laser melting of oxide dispersion strengthened MA956 alloy and its surface finishing by magnetic field assisted finishing

Selective laser melting (SLM) is a prominent metal additive manufacturing (AM) capable of processing a myriad of engineering materials with high precision and design freedom. However, similar to other AM processes, poor surface finishing has been an omnipresent problem in SLM technology. In this study, magnetic field assisted finishing (MAF) was used to finish SLM fabricated oxide dispersion strengthened (ODS) MA956, an iron-chromium-aluminum alloy. The effect of laser processing parameters on part density and surface roughness was first studied. Using a multi-objective optimization technique, the optimal parameters to obtain the highest density and lowest surface roughness were determined. Finally, MAF was applied to the parts built with the obtained optimal SLM parameters, but without significant improvement on the surfaces of as-printed samples. Hence, the surfaces of as-printed samples were post-processed (ground) to yield better initial surface conditions prior to MAF. The effect of initial roughness, iron particles size, and abrasive size on MAF performance was studied. Initial roughness had the most dominant effect followed by abrasive size. The underlying mechanism behind the dependency on initial roughness on final surface quality was analyzed by studying the change on the surface profiles with different starting initial roughness. The initial roughness required for MAF to be effective was determined. In conclusion, using the optimal processing conditions, MAF was applied to the post-processed samples to attain the final average surface roughness (R a ) as little as 0.36 μm starting from initial average roughness (R a ) of 1.53 μm.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗
DOE OSTI2024

Development of spectroscopic tools for nuclear forensics signatures development

The Savannah River National Laboratory (SRNL) has been developing advanced spectroscopic tools for the characterization of plutonium-bearing compounds with the intent to develop material and process signatures for nuclear forensics. Plutonium in a production, refining, or finishing facility will exist in many forms including oxide precursors (PuF4, PuF3, Pu oxalate, etc.), oxide, and metal. The ability to identify plutonium in each of these chemical forms and determine their processing history is crucial for the development of spectroscopic signatures. This presentation will focus on our work to develop and apply spectroscopic tools at SRNL using doubled-walled cells (DWC) to characterize the thermal decomposition of oxalates, calcination chemistry, alpha-decay-induced chemistry, age dating since last calcination, and other signatures related to plutonium processing.

Villa-Aleman, Eliel↗
DOE OSTI2025

Development of direct ink write radially graded alumina/zirconia

Functionally graded materials (FGMs) are of interest in multiple fields, yet many materials combinations are limited by coefficient of thermal expansion (CTE) mismatch. Here, a radially graded alumina/yttria-doped zirconia (Al 2 O 3 /8YZ) FGM is used to demonstrate processing strategies to mitigate CTE and sintering behavior differences between these oxides. FGM materials are especially sensitive to ink stability during printing, as all components (in this case, Al 2 O 3 and 8YZ) must be stabilized in the same dispersant or additive solution. Thus, this system is also ideal to demonstrate ink optimization best practices. Materials were characterized throughout processing to correlate the effects of common additives on both the ceramic particle suspensions and final sintered components. Aggregation observed in the initial additive-containing suspensions were present in the sintered component. The differences in sintering onset temperature and shrinkage rate resulted in internal stresses within the sintered component, which ultimately caused mechanical failure of the component under low stress. In conclusion, a processing strategy was recommended to mitigate the sintering behavior mismatch of alumina and 8 wt% yttria-stabilized zirconia.

Lamm, Benjamin W. [Oak Ridge National Laboratory (↗
DOE OSTI2026

The effect of varying powder feedstock chemistry and printing atmosphere on the microstructure of additively manufactured nickel-based ODS alloys: Role on stabilization of cellular structures vs. oxide dispersion formation

Nickel-based alloys have a wide variety of structural applications due to their high corrosion resistance and mechanical strength which depend on solid solution strengthening, or the formation of oxides and/or intermetallic precipitation for their properties. In this study, the microstructure of six Ni–Cr–Y–Ti–Al powder batches designed for the production of oxide dispersion strengthened nickel were compared. These batches varied in chemistry and atomization technique used which included Gas Atomization Reactive Synthesis (GARS). The batches of powder were then consolidated via Additive Manufacturing (AM) Powder Bed Fusion using Laser Beam (PBF-LB) and characterized via transmission electron microscopy to elucidate the influence of powder feedstock (i.e. synthesis methodology and chemistry) on the PBF-LB microstructure. The study investigates (i) how the amount of yttrium and titanium additions in the powder feedstock and the addition of oxygen during the processing (through GARS) affect the microstructure of the powder itself and the AM printed microstructure, and (ii) how the control of oxygen addition in the printing atmosphere during the PBF-LB printing process itself is another important parameter for achieving the formation of the wanted oxide dispersion versus the stabilization of the cellular structure (often observed in AM processed alloys). Microstructural characterization of both powder particles and additively manufactured nickel alloys in this study provide important insights into the movement of yttrium within the material upon solidification, particularly along cell boundaries, and how yttrium behaves depending on alloy chemistry. When a threshold of yttrium content is reached within the system, yttrium consistently reacts to form an intermetallic along cell boundaries instead of forming oxide nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Lewis Acid Supported Nickel Nitrenoids

Abstract Metalation of the polynucleating ligand F,tbs LH 6 (1,3,5‐C 6 H 9 (NC 6 H 3 −4‐F−2‐NSiMe 2 t Bu) 3 ) with two equivalents of Zn(N(SiMe 3 ) 2 ) 2 affords the dinuclear product ( F,tbs LH 2 )Zn 2 ( 1 ), which can be further deprotonated to yield ( F,tbs L)Zn 2 Li 2 (OEt 2 ) 4 ( 2 ). Transmetalation of 2 with NiCl 2 (py) 2 yields the heterometallic, trinuclear cluster ( F,tbs L)Zn 2 Ni(py) ( 3 ). Reduction of 3 with KC 8 affords [KC 222 ][( F,tbs L)Zn 2 Ni] ( 4 ) which features a monovalent Ni centre. Addition of 1‐adamantyl azide to 4 generates the bridging μ 3 ‐nitrenoid adduct [K(THF) 3 ][( F,tbs L)Zn 2 Ni(μ 3 ‐NAd)] ( 5 ). EPR spectroscopy reveals that the anionic cluster possesses a doublet ground state ( S = ). Cyclic voltammetry of 5 reveals two fully reversible redox events. The dianionic nitrenoid [K 2 (THF) 9 ][( F,tbs L)Zn 2 Ni(μ 3 ‐NAd)] ( 6 ) was isolated and characterized while the neutral redox isomer was observed to undergo both intra‐ and intermolecular H‐atom abstraction processes. Ni K‐edge XAS studies suggest a divalent oxidation state for the Ni centres in both the monoanionic and dianionic [Zn 2 Ni] nitrenoid complexes. However, DFT analysis suggests Ni‐borne oxidation for 5 .

Juda, Cristin E.↗
DOE OSTI2025

Zinc(II) Monomeric, Dimeric, and Trimeric Photosensitizers with Microsecond‐Lived Intra‐ligand Charge Transfer Excited States Investigated through Time‐Resolved Optical and X‐Ray Spectroscopy

Zn II photosensitizers relative to Cu I complexes have received less attention due to their energetically higher metal‐to‐ligand charge transfer states. Three Zn II complexes, namely a Monomer, a bimetallic helicate, and a trimetallic helicate, bearing phenanthroline ligands are hereby studied through time‐resolved X‐ray absorption (tr‐XAS) and femto‐microsecond optical transient absorption spectroscopy (OTA). The formation of intraligand singlet charge transfer ( I ILCT) excited states is achieved within femtoseconds, followed by intersystem crossing (ISC) in nanoseconds to generate microsecond‐lived triplet ( 3 ILCT) states. Femtosecond OTA shows that the 1 ILCT states in the Monomer, Dimer, and Trimer occur within 235 fs, 683 fs, and 730 fs, respectively, while nano‐microsecond OTA and tr‐XAS show their 3 ILCT states to decay within 1.00 µs, 1.48 µs, and 1.51 µs. The ISC from the 1 ILCT to the 3 ILCT state for the Trimer is 42.8 ns compared to the Monomer and Dimer with ISC rates of less than 13 ns. These differences arise due to the stabilization by π‐π and CH‐π noncovalent interactions of the phenanthroline ligands. The dihedral and torsional angles indicate stronger ligand strains in the excited states of the Dimer and Trimer versus the Monomer. DFT calculations for the electrochemical oxidation potentials further highlight their capability in inducing photoredox processes.

earth-abundant Zn-based photosensitizers↗
DOE OSTI2020

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. Here, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e.g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Optimizing Vertical Crystallization for Efficient Perovskite Solar Cells by Buried Composite Layers

Planar-heterojunction perovskite solar cells (PSCs) have experienced rapid evolution in recent years because of the low-temperature processing, suitable alignment, and high mobility of the tin oxide buried contact layer. However, improper SnO 2 surface states and poor crystallinity of the top perovskite films are still the main obstacles for the planar PSCs in which performance always lags behind their mesoporous counterparts. Herein, a new buried contact is reported by introducing graphitic carbon nitride (g-C 3 N 4 ) into the commonly used SnO 2 which performs outstanding transmittance, conductivity, and surface states for a high-quality electron-transporting layer. Moreover, the vertical composition and crystallinity of the top perovskite film are manipulated by rich amino groups on the edge of the g-C 3 N 4 nanosheets which induce the prenucleation of the lead-rich species at the buried interface. Benefiting from the high-quality buried contacts and the optimized perovskite layers, the resultant PSCs achieve a champion efficiency of 21.5% with all photovoltaic parameters enhanced in comparison with their control counterparts (<20%).

planar-heterojunction perovskite solar cells↗
DOE OSTI2022

Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders

Abstract Laser powder bed fusion (LPBF) additive manufacturing (AM) is a promising route for the fabrication of oxide dispersion strengthened (ODS) steels. In this study, 14YWT ferritic steel powders were produced by gas atomization reaction synthesis (GARS). The rapid solidification resulted in the formation of stable, Y-containing intermetallic Y 2 Fe 17 on the interior of the powder and a stable Cr-rich oxide surface. The GARS powders were consolidated with LPBF. Process parameter maps identified a stable process window resulting in a relative density of 99.8%. Transmission electron microscopy and high-energy x-ray diffraction demonstrated that during LPBF, the stable phases in the powder dissociated in the liquid melt pool and reacted to form a high density (1.7 × 10 20 /m 3 ) of homogeneously distributed Ti 2 Y 2 O 7 pyrochlore dispersoids ranging from 17 to 57 nm. The use of GARS powder bypasses the mechanical alloying step typically required to produce ODS feedstock. Preliminary mechanical tests demonstrated an ultimate tensile and yield strength of 474 MPa and 312 MPa, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Automated descriptor selection, volcano curve generation, and active site determination using the DescMAP software

The material space for catalyst discovery is expansive. Volcano curves are traditionally employed to provide physical insights into optimal catalyst characteristics for new material selection. Their generation lies on a single descriptor picked using expert knowledge. Here we present DescMAP, a Python-based software, to automate the selection of descriptors, the generation of volcano maps, and the identification of active sites for structure-sensitive reactions. Here, we consider traditional energy-based and geometric descriptors for structure-sensitive reactions. DescMAP is integrated with the Virtual Kinetic Laboratory (VLab) to provide multiple functionalities. It inputs spreadsheets or template files for flexibility and outputs interactive graphs for post-processing. We demonstrate its features using the non-oxidative dehydrogenation of ethane to ethylene over (111) closed-packed surfaces and the methane total oxidation over various Pt facets. It can be easily applied to other complex chemistries and achieves quick screening of potential catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

There is currently an ever-increasing demand for higher process efficiencies in next generation (Gen3) concentrating solar power (CSP). Higher process efficiencies may be procured by increasing the operating temperature, and simultaneously, minimizing the degradation of materials used for construction of CSP plants (e.g., piping, thermal storage tanks, solar receivers and heat exchangers). Thus, understanding materials corrosion in the presence of molten salt mixtures used as thermal energy storage media and heat transfer fluids is indispensable for CSP development. The present paper provides insights into the effects of salt purification on the corrosion of a nickel-based alloy (Haynes 230) isothermally exposed to a stagnant chloride-based salt mixture at 800 °C. The MgCl 2 -based salt mixture was thermally dehydrated and chemically treated with (0.1 and 0.5 wt %) elemental magnesium. Results reveal the electrochemical nature of the corrosion process, and the formation of corrosion products such as oxides (MgO, MgCr 2 O 4 , and MgAl 2 O 4 ) and nitrides (CrN) on the alloy surface and in sub-surface regions. Magnesium additions enhanced the ability to resist corrosion by reducing the concentration of impurities (H 2 O, MgOH + , OH - species) and polarizing the alloy surface. The formation of nitrides in all cases studied indicates the impact of using nitrogen as a protective gas in the system. Results also reveal that a single step treatment of the salt using metallic Mg could be considered as a measure to control the salt's impurity level, e.g., if required for system control.

14 SOLAR ENERGY↗
DOE OSTI2025

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗
DOE OSTI2021

Hydroxymethanesulfonate (HMS) Formation during Summertime Fog in an Arctic Oil Field

Hydroxymethanesulfonate (HMS) is produced in the aqueous-phase reaction of formaldehyde (HCHO) and sulfur dioxide (SO 2 ) and has been proposed as a significant contributor to midlatitude wintertime pollution events. In this work, we report HMS detection within submicrometer atmospheric aerosols during frequent late summer, regional fog events in an Arctic oil field. The number fraction of individual particles containing HMS increased during fog periods, consistent with aqueous-phase formation. The single-particle mass spectra showed the primary particle signature (oil field emissions), plus secondary oxidized organics and sulfate, consistent with aqueous-phase processing. HMS mass concentrations ranged from below the ion chromatography limit of detection (0.3 ng/m 3 ) to 1.6 ng/m 3 , with sulfate concentrations of 37-222 ng/m 3 . HCHO and SO 2 measurements suggest that the fog HMS production rate is ~10 times higher in the oil fields than in the upwind Beaufort Sea. Aqueous-phase reactions of local oil field emissions during frequent summertime regional fog events likely have downwind impacts on Arctic aerosol composition. The potential for fog-based HMS production was estimated to be an order of magnitude higher in Fairbanks and Anchorage, AK, than in the oil fields and may explain the missing organosulfate source contributing to Fairbanks air quality.

54 ENVIRONMENTAL SCIENCES↗