Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Operational Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Holographic pseudoentanglement and the complexity of the AdS/CFT dictionary

The `quantum gravity in the lab' paradigm suggests that quantum computers might shed light on quantum gravity by simulating the CFT side of the AdS/CFT correspondence and mapping the results to the AdS side. This relies on the assumption that the duality map (the `dictionary') is efficient to compute. In this work, we show that the complexity of the AdS/CFT dictionary is surprisingly subtle: there might be cases in which one can efficiently apply operators to the CFT state (a task we call 'operator reconstruction') without being able to extract basic properties of the dual bulk state such as its geometry (which we call 'geometry reconstruction'). Geometry reconstruction corresponds to the setting where we want to extract properties of a completely unknown bulk dual from a simulated CFT boundary state. We demonstrate that geometry reconstruction may be generically hard due to the connection between geometry and entanglement in holography. In particular we construct ensembles of states whose entanglement approximately obey the Ryu-Takayanagi formula for arbitrary geometries, but which are nevertheless computationally indistinguishable. This suggests that even for states with the special entanglement structure of holographic CFT states, geometry reconstruction might be hard. This result should be compared with existing evidence that operator reconstruction is generically easy in AdS/CFT. A useful analogy for the difference between these two tasks is quantum fully homomorphic encryption (FHE): this encrypts quantum states in such a way that no efficient adversary can learn properties of the state, but operators can be applied efficiently to the encrypted state. We show that quantum FHE can separate the complexity of geometry reconstruction vs operator reconstruction, which raises the question whether FHE could be a useful lens through which to view AdS/CFT.

FOS: Physical sciences↗
DOE OSTI2023

Tailoring Crystallization Dynamics of CsPbI 3 for Scalable Production of Efficient Inorganic Perovskite Solar Cells

All-inorganic perovskite cesium lead triiodide (CsPbI 3 ) with inorganic nature, low-temperature synthesis, and a suitable bandgap is desirable for high-performance photovoltaics. However, the scalable production of CsPbI 3 photovoltaics is still challenging due to a large nucleation energy barrier and slow phase transition during unassisted natural crystallization. Here, the crystallization dynamics of CsPbI 3 thin films is tailored via lead acetate (PbAc 2 ) substitution in the perovskite precursor ink, allowing the scalable fabrication of efficient all-inorganic perovskite solar cells and minimodules. Introducing PbAc 2 enlarges CsPbI 3 colloid size in the precursor and reduces the nucleation energy barrier. Additionally, reactions between acetate and dimethylammonium in the wet film accelerate the removal of dimethylammonium additives and generate solvent vapors for self-regulate internal solvent annealing, resulting in densely packed, uniform, and pinhole-free CsPbI 3 perovskite films over large areas. This strategy demonstrates inverted CsPbI 3 solar cells with 20.17% efficiency and good operational stability (retaining 95.5% of initial efficiency after continuous operation for 1800 h) and 15.1%-efficient CsPbI 3 minimodules with an active area of 26.8 cm 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Automated Mobility District Implementation Catalog, 2nd Edition: Safe and Efficient Automated Vehicle Fleet Operations for Public Mobility

This second volume of the Automated Mobility District (AMD) Implementation Catalog series has been prepared in three parts to assist readers in their review and understanding of the technical information herein. The material may be more easily ingested if each of the three parts is read and then contemplated for its ramifications to the specific interest of the reader before continuing to the next part. Further, each part has been prepared with the intent that it could be read independently from the others. Part 1 is Progress of Automated Vehicle R&D for Deployments in Passenger Service; Part 2 is 10 Early Deployment Sites as Prototypes of AMD Implementation; Part 3 is Five Cardinal Principles for AMD Implementation.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1993

KSC ground operations planning for Space Station

At the Kennedy Space Center (KSC) in Florida, processing facilities are being built and activated to support the processing, checkout, and launch of Space Station elements. The generic capability of these facilities will be utilized to support resupply missions for payloads, life support services, and propellants for the 30-year life of the program. Special Ground Support Equipment (GSE) is being designed for Space Station hardware special handling requirements, and a Test, Checkout, and Monitoring System (TCMS) is under development to verify that the flight elements are ready for launch. The facilities and equipment used at KSC, along with the testing required to accomplish the mission, are described in detail to provide an understanding of the complexity of operations at the launch site. Assessments of hardware processing flows through KSC are being conducted to minimize the processing flow times for each hardware element. Baseline operations plans and the changes made to improve operations and reduce costs are described, recognizing that efficient ground operations are a major key to success of the Space Station.

Lyon, J. R.↗
NASA NTRS2015

Automated Meta-Aircraft Operations for a More Efficient and Responsive Air Transportation System

A brief overview is given of the on-going NASA Automated Cooperative Trajectories project. Current status and upcoming work is previewed. The motivating factors and innovative aspects of ACT are discussed along with technical challenges and the expected system-level impacts if the project is successful. Preliminary results from the NASA G-III hardware in the loop simulation are included.

flight paths↗
NASA NTRS2015

Automated Meta-Aircraft Operations for a More Efficient and Responsive Air Transportation System

A brief overview is given of the on-going NASA Automated Cooperative Trajectories project. Current status and upcoming work is previewed. The motivating factors and innovative aspects of ACT are discussed along with technical challenges and the expected system-level impacts if the project is successful. Preliminary results from the NASA G-III hardware in the loop simulation are included.

flight paths↗
NASA NTRS2017

Limiting Data Friction by Reducing Data Download Using Spatiotemporally Aligned Data Organization Through STARE

Current data processing practice limits the volume and variety of relevant geoscience data that can practically be applied to important problems. File archives in centralized data centers are the principal means by which Earth Science data are accessed. This approach, however, requires laborious search, retrieval, and eventual customization/adaptation for the data to be used. Such fractionation makes it even more difficult to share outcomes, i.e. research artifacts and data products, hampering reusability and repeatability, since end users generally have their own research agenda and preferences as well as scarce resources. Thus, while finding and downloading data files from central data centers are already costly for end users working in their own field, using data products from other disciplines rapidly becomes prohibitive. This curtails scientific productivity, limits avenues of study, and endangers quality and reproducibility. The Spatio-Temporal Adaptive Resolution Encoding (STARE) is a unifying scheme that facilitates the indexing, access, and fusion of diverse Earth Science data. STARE implements an innovative encoding of geo-spatiotemporal information, originally developed for aligning datasets with diverse spatiotemporal characteristics in an array database. The spatial component of STARE recursively quadfurcates a root polyhedron, producing a hierarchical scheme for addressing geographic locations and regions. The temporal component of STARE uses conventional date-time units as an indexing hierarchy. The additional encoding of spatial and temporal resolution information in STARE enables comparisons and conditional selections across diverse datasets. Moreover, spatiotemporal set-operations, e.g. union and intersection, are mapped to efficient integer operations with STARE. Applied to existing data models (point, grid, spacecraft swath) and corresponding granules, STARE indexes provide a streamlined description usable as geo-spatiotemporal metadata. When coupled with large scale, distributed hardware and software, STARE-based data access reduces pre-analysis data preparation costs by offering a convenient means to align different datasets spatiotemporally without specialized effort in parallel computing or distributed data management.

Kuo, Kwo-Sen↗
NASA NTRS2017

Development of a 50,000-s, Lithium-fueled, Gridded Ion Thruster

The ion propulsion system on NASA’s Dawn mission provided over 11 km/s delta-V to the spacecraft. There is potential interest in missions that have delta-V’s an order of magnitude greater than this, i.e., 100 km/s to 200 km/s. To perform such missions would require a thruster that can produce a specific impulse roughly an order of magnitude greater than the 3100 s of the Dawn ion propulsion system. A 50-kW gridded ion thruster is being developed for operation with lithium propellant to produce a specific impulse of 50,000 s. The resulting thruster design requires a net accelerating voltage of 9 kV and a beam current of 5.5 A. Discharge chamber modeling is used to design a 35-cm diameter ring-cusp discharge chamber with six magnet rings. The discharge chamber is masked down to produce an active grid area that is ~25 cm diameter. Modeling suggests that the unique ionization characteristics of lithium may enable discharge chamber operation at a propellant efficiency of 99%. Operation at such a high propellant efficiency could significantly reduce the production of charge-exchange ions and thereby significantly reduce erosion of the accelerator grid.

Goebel, Dan M.↗
NASA NTRS1972

Development of an engineering model traveling wave tube amplifier for space communication systems

A design has been made of a 100 watt traveling-wave tube amplifier for use in space communication applications. The features of very high overall efficiency and heat rejection of waste heat at low thermal densities were predominant in the design concept. The design concept was proven by building a series of tubes, operating at efficiencies up to 50%. These tubes utilized heat pipe cooling and heat distribution such that 150 watts of waste heat was rejected at a density of less than 1.5 watts per square inch. A power supply to convert a 28 volt primary line of the needs of the TWT was built and operated at 85% efficiency.

Eallonardo, C. M.↗
NASA NTRS1999

Non-Toxic Reaction Control System for the Reusable First Stage Vehicle

This paper presents the Boeing Reusable Space Systems vision of a Reaction Control System (RCS) for the Reusable First Stage (RFS) being considered as a replacement for the Solid Rocket Booster for the Space Shuttle. The requirement is to,achieve reliable vehicle control during the upper atmospheric portion of the RFS trajectory while enabling more efficient ground operations, unhindered by constraints caused by operating with highly toxic RCS propellants. Boeing's objective for this effort is to develop a safer, more efficient and environmentally friendly RCS design approach that is suitable for the RFS concept of operations, including a low cost, efficient turnaround cycle. The Boeing RCS concept utilizes ethanol and liquid oxygen in place of the highly toxic, suspected carcinogen, ozone- depleting mono-methyl-hydrazine and highly toxic nitrogen tetroxide. The Space Shuttle Upgrade program, under the leadership of the NASA Johnson Space Flight Center, is currently developing liquid oxygen and ethanol (ethyl alcohol) technology for use as non-toxic orbital maneuvering system (OMS) and RCS. The development of this liquid oxygen and ethanol technology for the Space Shuffle offers a significant leverage to select much of the same technology for the RFS program. There are significant design and development issues involved with bringing this liquid oxygen and ethanol technology to a state of maturity suitable for an operational RCS, The risks associated with a new LOX and Ethanol RCS are mitigated by maintaining kerosene and hydrogen peroxide RCS technology as an alternative. These issues, presented within this paper, include managing the oxygen supply and achieving reliable ignition in the short pulse mode of engine operation. Performance, reliability and operations requirements are presented along with a specific RCS design concept to satisfying these requirements. The work reported in this paper was performed under NASA Marshall Space Flight Center Contract to define Reusable First Stage design concepts for the Space Shuttle.

Keith, E. L.↗
NASA NTRS1999

Non-Toxic Reaction Control System for the Reusable First Stage Vehicle

This paper presents the Boeing Reusable Space Systems vision of a Reaction Control System (RCS) for the Reusable First Stage (RFS) being considered as a replacement for the Solid Rocket Booster for the Space Shuttle. The requirement is to achieve reliable vehicle control during the upper atmospheric portion of the RFS trajectory while enabling more efficient ground operations, unhindered by constraints caused by operating with highly toxic RCS propellants. Boeing's objective for this effort is to develop a safer, more efficient and environmentally friendly RCS design approach that is suitable for the RFS concept of operations, including a low cost, efficient turnaround cycle. The Boeing RCS concept utilizes ethanol and liquid oxygen in place of the highly toxic, suspected carcinogen, ozone-depleting mono-methyl-hydrazine and highly toxic nitrogen tetroxide. The Space Shuttle Upgrade program, under the leadership of the NASA Johnson Space Flight Center, is currently developing liquid oxygen and ethanol (ethyl alcohol) technology for use as non-toxic orbital maneuvering system (OMS) and RCS. The development of this liquid oxygen and ethanol technology for the Space Shuttle offers a significant leverage to select much of the same technology for the RFS program. There are significant design and development issues involved with bringing this liquid oxygen and ethanol technology to a state of maturity suitable for an operational RCS. The risks associated with a new LOX and Ethanol RCS are mitigated by maintaining kerosene and hydrogen peroxide RCS technology as an alternative. These issues, presented within this paper, include managing the oxygen supply and achieving reliable ignition in the short pulse mode of engine operation. Performance, reliability and operations requirements are presented along with a specific RCS design concept to satisfying these requirements. The work reported in this paper was performed under NASA Marshall Space Flight Center Contract Number NAS8-97272 to define Reusable First Stage design concepts for the Space Shuttle.

Keith, E. L.↗
DOE OSTI2026

Octave-spanning terahertz quarter-wave plates based on over-coupled Fabry–Pérot resonances in reflective metal–dielectric–metal metasurfaces

Compact devices for broadband polarization control in the terahertz (THz) regime remain challenging to realize due to the intrinsic phase dispersion associated with birefringent materials and resonant structures. Here, we demonstrate achromatic THz quarter-wave plates with near-unity efficiency and operating under a wide range of incidence angles, based on over-coupled metal–dielectric–metal reflective metasurfaces. The devices operate as single-port anisotropic Fabry–Pérot cavities, in which the phase dispersion of the over-coupled resonances is engineered to maintain an approximately constant relative phase delay between orthogonal field components over a broad frequency range. Four complementary metasurface designs operating at an incidence angle of 45° collectively cover the 0.25–3 THz frequency range accessible to a typical THz time-domain spectroscopy system. Each device exhibits an approximately octave-wide operational bandwidth, with axial ratios below 3 dB and polarization-conversion efficiencies exceeding 80% across most of the operating band. Systematic structural optimization suppresses coupling to diffraction and guided-wave modes, thereby further extending the usable bandwidth while preserving the required phase relationship between orthogonal polarizations. The demonstrated metasurfaces are compatible with wafer-scale fabrication processes, and experimental results show excellent agreement with simulations. These findings establish over-coupled reflective metasurfaces as a robust, scalable, and versatile platform for broadband THz polarization control.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Panel Session 35: Strategies and Successes in Increasing Efficiency and Reducing Cost to Accelerate Work While Maintaining Operational Excellence (R1.5)

This panel focused on results-based project execution and ways to improve the effectiveness of large radioactive clean-up site operations while increasing efficiency and reducing cost. Panelists discussed best practices and lessons learned from their sites and projects as they work within budgetary, resource and technological constraints. Panelist with presentations: CNS Journey (Morgan Smith)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2016

Unmanned Aircraft System Traffic Management (UTM) Concept of Operations

Many applications of small Unmanned Aircraft System (sUAS) have been envisioned. These include surveillance of key assets such as pipelines, rail, or electric wires, deliveries, search and rescue, traffic monitoring, videography, and precision agriculture. These operations are likely to occur in the same airspace in presence of many static and dynamic constraints such as airports, and high wind areas. Therefore, small UAS, typically 55 pounds and below, operations need to be managed to ensure safety and efficiency of operations is maintained. This paper will describe the Concept of Operations (ConOps) for NASA's UAS Traffic Management (UTM) research initiative. The UTM ConOps is focused on safely enabling large-scale small UAS (sUAS) operations in low altitude airspace. The UTM construct supports large-scale visual line of sight and beyond visual line of sight operations. It is based on two primary mantras: (1) flexibility where possible and structure where necessary (2) a risk-based approach where geographical needs and use case indicate the airspace performance requirements. Preliminary stakeholder feedback and initial UTM tests conducted by NASA show promise of UTM to enable large-scale low altitude UAS operations safely.

autonomy↗
DOE OSTI2021

Highly Integrated Wide Bandgap Power Module for Next Generation Plug-In Vehicles (Final Report)

Wide bandgap devices are key enablers for high power density traction inverters. A highly integrated wide bandgap (WBG) power module enables higher temperature operation, higher inverter efficiency and overall smaller die area with the same power delivery. However, it requires careful design of the power module to take advantage of all the superior material properties that silicon carbide (SiC) provides over conventional silicon (Si) Insulated Gate Bipolar Transistor (IGBT) based design. This project developed an efficient and densely packed SiC power module for an automotive traction inverter application. Extensive study was performed to select the best performing SiC die considering a wide range of temperature variation, suitability to integrate into target packaging, robust body diode performance and overall high electrical efficiency. Multiple design ideas were explored to achieve lower stray inductance for both power loop and signal loop, uniform current distribution, compact form factor, and very high thermal performance. The final power module package includes all six inverter switches in the same module (six-pack) with die sintered at both bottom and top surfaces utilizing high performance substrate to achieve high electrical and thermal performance. Two power module variants were developed using 900 V and 1200 V devices for operating at two different high voltage levels (> 600 V HV battery). Both power modules were comprehensively characterized, and high efficiency operation of the inverter was confirmed through analysis. Finally, a complete functional inverter was built with the 1200V power modules using other essential components (HV capacitors, gate driver board, controller board, current sensor, connectors etc.) and tested using GM’s standard test procedure. There are several challenges associated with adopting WBG devices for high voltage operation. In order to assess and mitigate those challenges, GM and subrecipients of this project have conducted multiple detailed studies. This includes phase current reconstruction using integrated Rogowski coil, device junction temperature estimation using on-state gate resistance, modeling and testing the effect of high voltage and fast switching on motor insulation and bearings, partial discharge inception voltage measurement under different environmental conditions. Findings of all these studies are summarized in this report.

33 ADVANCED PROPULSION SYSTEMS↗