SEARCH · Engineering Papers

Results for “Open source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Future Automotive Systems Technology Simulator (FASTSim) Validation Report - 2021

The National Renewable Energy Laboratory's Future Automotive Systems Technology Simulator (FASTSim) captures the most important factors influencing vehicle power demands and performs large-scale fuel efficiency calculations very quickly. These features make FASTSim well suited to evaluate a representative distribution of real-world fuel efficiency over a large quantity of in-use driving profiles, which have become increasingly available in recent years owing to incorporation of Global Positioning System data collection into various travel surveys and studies. In addition, by being open source, computationally lightweight, freely available, and free from expensive third-party software requirements, analyses conducted using FASTSim may be easily replicated and critiqued in an open forum. This is highly desirable for situations in which technical experts seek to reach consensus over questions about what vehicle development plans or public interest strategies could maximize fuel savings and minimize adverse environmental impacts with an evolving vehicle fleet. While FASTSim continues to be refined and improved on an ongoing basis, this report compiles available runs using versions of the tool from the past few years to provide illustrative comparisons of the model results against measured data.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

Recent Experiences Calculating g-functions for Use in Simulation of Ground Heat Exchangers

Temperature response functions, known as g-functions, are a computationally efficient method for simulating ground heat exchangers (GHEs), used with ground-source heat pump (GSHP) systems, either as part of a whole-building energy simulation or as part of a dedicated ground heat exchanger design tool. In fact, at present, they are the only feasible way to simulate a ground-source heat pump system in a whole-building energy simulation. This paper summarizes recent developments in the field and recent experience using a new open-source g-function calculation tool known as pygfunction (Cimmino 2018a, 2018b). This experience includes accuracy, computation time, memory requirements and sensitivity to boundary conditions. With larger ground heat exchangers, e.g. in excess of 100 boreholes, the computational time and memory requirements can create challenges.

Spitler, Jeffery↗

DOE OSTI2026

Using Gravitational Lensing to Probe for Candidate Quintessential Galaxies in the Epoch of Reionization

Abstract Understanding the properties of the first generation of galaxies is an ongoing challenge in observational astrophysics. James Webb Space Telescope deep-field observations have led to the identification of large numbers of galaxies within the Epoch of Reionization (EoR); however, it remains observationally challenging to study the detailed properties of the most numerous, faint high- z galaxies without strong gravitational lensing. To this end, we present five m AB ≃ 24 galaxies, all projected behind the cores of massive clusters where high lensing magnifications significantly (≳1.5 mag) boost their observed brightness. These galaxies are each characterized by a drop-off in their spectra between the near-IR and optical wavelengths, suggesting the presence of a Lyman break at z > 6. The bright sources enable precise dropout color constraints. We combine the dropout data with follow-up imaging to constrain continuum slopes redward of their breaks. Using the open-source spectral energy distribution modeling software Prospector , we characterize two of these galaxies as probable high- z ( z ∼ 6.5–7) and three as probable low- z ( z ∼ 2) sources, demonstrating that for very bright ( m AB < 24) dropout candidates even limited photometric data have good power to distinguish between high- z galaxies and red or dusty low- z galaxies. The two candidate high- z dropouts are comparably bright to the brightest galaxies identified at such redshifts in deep fields, but due to lensing magnifications are intrinsically fainter by at least 1.5 mag. If confirmed, these galaxies represent exciting laboratories for performing detailed follow-up studies of galaxy properties within the EoR.

Roberson, Joshua [University of Cincinnati] (ORCID↗

DOE OSTI2022

Soil Incubation, Methane Pool Dilution, Edgewater, MD, USA, July 2022 v1.0.1

Isotopic pool dilution is a powerful approach to quantify gross biogeochemical transformation rates, but remains seldom used despite its potential. To facilitate broader implementation of pool dilution methods, we developed a user-friendly R package that optimizes gross production and consumption rates (and optionally fractionation constants as well) based on standard pool dilution time series data. This data package is the soil methane pool dilution data and code for building and using this software, including source code (R) and raw data (.csv). This package features extensive documentation and example analyses, and is easily integrated into analytical pipelines as R software is free and open source. Operation of this package requires R version 2.10 or newer, and we recommend its use in conjunction with packages testthat (3.0.0), knitr, rmarkdown, ggploto2, tibble, and tidyr.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Modeling the contributions to acoustic nonlinearity from complex dislocation networks using 3D dislocation dynamics

Nonlinear ultrasonic parameters are highly sensitive to microstructural features that affect macroscale material behavior, providing a nondestructive means to characterize their evolution. Although dislocations are known to be a strong source of acoustic nonlinearity, establishing quantitative links between the acoustic nonlinearity parameter (β), measured via Second Harmonic Generation, and dislocation morphology—such as dislocation length and density—remains an open challenge. This work advances the numerical modeling of dislocation–β relationships using 3D dislocation dynamics (DD) simulations in two approaches: a “static” method computing strain and stress fields from dislocation configurations in the absence of external loading, and a “quasi-static” method to estimate β from the curvature of dislocation lines under applied load. First, the static method is combined with finite element analysis to investigate a recent assertion that heterogeneous initial strain fields can induce higher harmonic generation in a linear elastic medium; the present results do not corroborate this outcome. Then, the quasi-static method is applied to multiple-dislocation scenarios through parametric studies, revealing behaviors not predicted by analytical models, such as the competing interactions of edge and screw dislocations and the significant influence of applied stress on β. Finally, the simulations are used to model SHG experimental results and validate the hypothesis that β can decrease during plastic deformation, despite increasing dislocation density. As the DD code used here is open-source, it provides a practical platform for future investigation into microstructure–β relationships important to the interpretation of SHG results.

Materials science↗

DOE OSTI2023

A New Decade in Seismoacoustics (2010–2022)

Several sources of interest often generate both low‐frequency acoustic and seismic signals due to energy propagation through the atmosphere and the solid Earth. Seismic and acoustic observations are associated with a wide range of sources, including earthquakes, volcanoes, bolides, chemical and nuclear explosions, ocean noise, and others. The fusion of seismic and acoustic observations contributes to a better understanding of the source, both in terms of constraining source location and physics, as well as the seismic to acoustic coupling of energy. Here in this review, we summarize progress in seismoacoustic data processing, including recent developments in open‐source data availability, low‐cost seismic and acoustic sensors, and large‐scale deployments of collocated sensors from 2010 to 2022. Similarly, we outline the recent advancements in modeling efforts for both source characteristics and propagation dynamics. Finally, we highlight the advantages of fusing multiphenomenological signals, focusing on current and future techniques to improve source detection, localization, and characterization efforts. This review aims to serve as a reference for seismologists, acousticians, and others within the growing field of seismoacoustics and multiphenomenology research.

58 GEOSCIENCES↗

NASA NTRS2009

Coastal Online Analysis and Synthesis Tool 2.0 (COAST)

The Coastal Online Assessment and Synthesis Tool (COAST) 3D geobrowser has been developed to integrate disparate coastal datasets from NASA and other sources into a desktop tool that provides new data visualization and analysis capabilities for coastal researchers, managers, and residents. It is built upon the widely used NASA-developed open source World Wind geobrowser from NASA Ames (Patrick Hogan et al.) .Net and C# version is used for development. It is leveraged off of World Wind community shared code samples and COAST 2.0 enhancement direction is based on Coastal science community feedback and needs assessment (GOMA). The main objective is to empower the user to bring more user-meaningful data into multi-layered, multi-temporal spatial context.

Brown, Richard B.↗

NASA NTRS2009

Multi-Disciplinary Analysis and Optimization Frameworks

Since July 2008, the Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed one major milestone, Define Architecture & Interfaces for Next Generation Open Source MDAO Framework Milestone (9/30/08), and is completing the Generation 1 Framework validation milestone, which is due December 2008. Included in the presentation are: details of progress on developing the Open MDAO framework, modeling and testing the Generation 1 Framework, progress toward establishing partnerships with external parties, and discussion of additional potential collaborations

Naiman, Cynthia Gutierrez↗

NASA NTRS2021

Compositional Realizability Checking within FRET

A set of requirements for a reactive system is realizable if, for any sequence of inputs that satisfy the assumptions on the environment, the guarantees always hold. Realizability checking is essential to ensure that an implementation can be constructed that satisfies the requirements. We propose a framework that supports users in the non-trivial task of developing realizable requirements. Our framework uses architectural information to automatically de-compose a set of requirements into subsets that can be analyzed separately, and therefore more efficiently. It then integrates existing algorithms in order to detect unrealizability, identify minimal sets of conflicting requirements, and compute counterexamples. The capability to focus on minimal conflict sets is key for localizing and correcting the sources of unrealizability. Our approach supports this process by enabling users to interactively visualize and explore the produced conflict sets and counterexamples. We have implemented our framework in the open-source Formal Requirements Elicitation Tool (FRET), and have used it on a variety of industrial-level case studies, showcasing the strengths of our approach in terms of raw performance, as well as diagnostic potential.

FRET↗

DOE OSTI2023

Feedback lock-in: A versatile multi-terminal measurement system for electrical transport devices

Here, we present the design and implementation of a measurement system that enables parallel drive and detection of small currents and voltages at numerous electrical contacts to a multi-terminal electrical device. This system, which we term a feedback lock-in, combines digital control-loop feedback with software-defined lock-in measurements to dynamically source currents and measure small, pre-amplified potentials. The effective input impedance of each current/voltage probe can be set via software, permitting any given contact to behave as an open-circuit voltage lead or as a virtually grounded current source/sink. This enables programmatic switching of measurement configurations and permits measurement of currents at multiple drain contacts without the use of current preamplifiers. Our 32-channel implementation relies on commercially available digital input/output boards, home-built voltage preamplifiers, and custom open-source software. With our feedback lock-in, we demonstrate differential measurement sensitivity comparable to a widely used commercially available lock-in amplifier and perform efficient multi-terminal electrical transport measurements on twisted bilayer graphene and SrTiO 3 quantum point contacts. The feedback lock-in also enables a new style of measurement using multiple current probes, which we demonstrate on a ballistic graphene device.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Technical Bulletin 005: NTP Monitoring

The Center for Alternative Synchronization and Timing (CAST) views Precision Time Protocol (PTP) and Network Time Protocol (NTP) as critical elements of the grid, from generation to the grid edge. This tech bulletin discusses the operation of NTP. The document shows not only commercial but also open-source applications. In some cases, the commercial applications may already have existing feature sets to secure and monitor NTP streams. From a security standpoint, using subscription NTP is risky unless the open bidirectional ports on local firewalls and routers are properly monitored and controlled.

24 POWER TRANSMISSION AND DISTRIBUTION↗

NASA NTRSDate not supplied

Exploring Blockchain to Support Open Science Practices

Open science aims to foster transparent sharing of scientific processes including open access, incentivization, provenance, open source code and tools, metrics, and resource sharing. However, effective management of these processes remains a challenge. This paper explores the application of blockchain technology to address these key aspects of open science. Blockchain offers a decentralized and secureplatform for information exchange and verification. By leveraging blockchain, open science can enhance transparency and reproducibility. In this paper, we present an implementation of blockchain for Earth science data synchronization across organizations, enabling tracking of data copying, citation, anddownload. The findings highlight the potential of blockchain in supporting open science objectives.

Iksha Gurung↗

DOE OSTI2022

USEEIO v2.0, The US Environmentally-Extended Input-Output Model v2.0

USEEIO v2.0 is an environmental-economic model of US goods and services that can be used for life cycle assessment, footprinting, national prioritization, and related applications. This paper describes the development of the model and accompanies the release of a full model dataset as well as various supporting datasets of national environmental totals by US industry. Novel methodological elements since USEEIO v1 models include waste sector disaggregation, final demand vectors for US consumption and production, a domestic form of the model that can be used to separate domestic and foreign impacts, and price adjustment matrices for converting outputs to purchaser price and in various US dollar years. Improvements in modeling national totals of industry and environmental flows are described. The model is validated through reproduction of national totals from input data sources and through analysis of changes from the most recent complete USEEIO model that can be explained based on data updates or method changes. The model datasets can all be reproduced with open source software packages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

A new form of the Saint-Venant equations for variable topography

The solution stability of river models using the one-dimensional (1D) Saint-Venant equations can be easily undermined when source terms in the discrete equations do not satisfy the Lipschitz smoothness condition for partial differential equations. Although instability issues have been previously noted, they are typically treated as model implementation issues rather than as underlying problems associated with the form of the governing equations. This study proposes a new reference slope form of the Saint-Venant equations to ensure smooth slope source terms and eliminate one source of potential numerical oscillations. It is shown that a simple algebraic transformation of channel geometry provides a smooth reference slope while preserving the correct cross-section flow area and the total Piezometric pressure gradient that drives the flow. The reference slope method ensures the slope source term in the governing equations is Lipschitz continuous while maintaining all the underlying complexity of the real-world geometry. The validity of the mathematical concept is demonstrated with the open-source Simulation Program for River Networks (SPRNT) model in a series of artificial test cases and a simulation of a small urban creek. Validation comparisons are made with analytical solutions and the Hydrologic Engineering Center's River Analysis System (HEC-RAS) model. The new method reduces numerical oscillations and instabilities without requiring ad hoc smoothing algorithms.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Implementation of FAIR principles in the IPCC: the WGI AR6 Atlas repository

The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. We present the Atlas chapter of Working Group I (WGI) as a test case. We describe the application of the FAIR principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We introduce the open source repository resulting from this process, including coding (e.g., annotated Jupyter notebooks), data provenance, and some aggregated datasets used in some figures in the Atlas chapter and its interactive companion (the Interactive Atlas), open to scrutiny by the scientific community and the general public. We describe the informal pilot review conducted on this repository to gather recommendations that led to significant improvements. Finally, a working example illustrates the re-use of the repository resources to produce customized regional information, extending the Interactive Atlas products and running the code interactively in a web browser using Jupyter notebooks.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Building Efficiency Targeting Tool for Energy Retrofits (BETTER) Web Application (BETTER Web App) v1.0

The Building Efficiency Targeting Tool for Energy Retrofits (BETTER) V.1.0 web application identifies cost-saving energy and emissions reductions in buildings and portfolios, without site visits or complex modeling. With minimal data entry, BETTER benchmarks a building's or portfolio's energy use against peers; quantifies energy, cost, and greenhouse gas (GHG) reduction potential; and recommends energy efficiency measures for individual buildings or portfolios, targeting specific energy savings levels. The source code of BETTER's modular, cross-platform analytical engine has previously been disclosed (2019-001) and is available on GitHub and can be adopted, redeveloped, and redistributed freely under an open-source license, allowing users to incorporate BETTER's analytical capabilities into their own software platforms and tools. The BETTER V.1.0 web application, developed with the Django web-framework and the Model-View-Controller (MVC) architecture being disclosed here, provides a graphical user interface (GUI) for any user to view the software tutorials, download and upload a data entry template, configure and run the BETTER analyses, and view the final analytical reports.

Szum, Carolyn↗

NASA NTRS2010

Math Description Engine Software Development Kit

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Shelton, Robert O.↗

NASA NTRSDate not supplied

NASA's Aviary Takes Flight: A Public Software for Aircraft Design

Aviary, developed by NASA, is an open-source software tool for modeling and optimizing traditional and next-generation aircraft designs. It modernizes legacy design tools and integrates disciplines together more tightly to evaluate new vehicles, like X-66, open-rotor electric aircraft, and blended wing body. Aviary has the potential to revolutionize aircraft analysis by leveraging the complex interactions between disciplines to make aircraft conceptual designs more efficient.

Carl Recine↗