SEARCH · Engineering Papers
Results for “Neal”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Volvo Pathway to Cost-Effective Commercialized Freight Efficiency (SuperTruck 2)
Volvo’s SuperTruck 2 (ST2) built on the success of the SuperTruck 1 (ST1) project, with the objective to research, develop, and demonstrate a Class 8 long-haul tractor-trailer concept truck designed with an integrated approach to maximize freight efficiency and achieve the following goals: - Greater than 100% improvement in vehicle freight efficiency (FE) on a ton-mile-per-gallon basis, with a stretch goal of 120% improvement relative to a 2009 baseline. - Greater than or equal to 55% engine brake thermal efficiency (BTE) demonstrated in an operational engine at a 65-mph cruise point on a dynamometer. - Develop technologies that are commercially cost effective in terms of a simple payback. This cooperative agreement with the US Department of Energy (DOE) had a total project cost of $40,000,000 with a 50% cost share, or $20,000,000, paid by the DOE. This project was awarded to Volvo Technology of America, LLC, who was the prime recipient and project lead. Metalsa, Michelin, Wabash, Bergstrom, University of Michigan, Oak Ridge National Laboratory, Johnson Matthey, Knight Transportation, Wegmans, and Motivo were partners / sub-recipients in this project.
Testing of Fumeless Dissolver for Up to 750 Grams of Uranium
Explore the source record for details and available documents.
Mo-99 Concentration and processing by Solvent Extraction and Ion Exchange
Normally derived from its transient-equilibrium parent molybdenum-99 ( 99 Mo) (t½ = 66 h), the short-lived isotope technetium-99m ( 99m Tc) (t ½ = 6.0 h) is the most widely used medical isotope in diagnostic imaging today. The National Nuclear Security Administration’s (NNSA’s) Material Management and Minimization (M3) program—established under the auspices of the American Medical Isotope Production Act—has been tasked with facilitating the work of domestic 99 Mo suppliers that do not use highly enriched uranium (HEU). Superconducting electron linear accelerators that employ high-Z converter targets can generate bremsstrahlung photons and neutron fluxes that can induce photonuclear reactions and uranium (U) fission. Argonne, in collaboration with industrial partners, has been developing the process chemistry for superconducting linear accelerator (LINAC)-irradiated triuranium octoxide (U 3 O 8 ) targets to produce 99 Mo. In short, the process involves dissolving the irradiated targets in nitric acid, which simultaneously releases valuable fission products (xenon and iodine). After adjusting the acid concentration, producers process the feed using tri-n-butyl phosphate (TBP), then mix the raffinate derived from this extraction cycle with a phosphinic acid such as Cyanex 272 or di(2-ethylhexyl) phosphoric acid (HDEHP), which is selective for Mo (molybdenum liquid liquid extraction [MoLLE]). In the next step, a concentration column comprising an anion exchange platform is used to decontaminate the remaining fission products, generating a pure 99 Mo stream in sodium hydroxide (NaOH)/sodium chloride (NaCl).
Synthesis of Novel Hybrid Nanostructures Employing Advanced Structural Characterization Techniques
This proposal was for carrying out research on creating novel hybrid nanostructures with novel and interesting functional properties with the help of advanced structural on adding 0.001, 0.01 and 0.02 mg of Au nanoparticles. From the reflectivity measurements, and the intensities of the various order diffraction peaks from the multilayers, we were able to reconstruct the electron density profiles of the films normal to their surfaces. characterization techniques. There were 3 components to the research: (1) seeing if new hybrid nanostructures could be synthesized from Au nanoparticles and lipid multilayers (2) making artificial cells from Galactopyranose-Derived Single-Chain Amphiphiles and sponge phases of lipid/amphiphile mixtures, and (3) characterizing the pair distribution function for complex nanoparticles of melanin to understand/predict the structural colors seen in aggregates of such nanoparticles.
Rosario Strait Tidal Energy plus Energy Storage — Preliminary Economic Assessment
The Orcas Power and Light Co-op (OPALCO) is a non-profit utility that provides energy services to approximately 11,700 customers across 20 islands in San Juan County, Washington. OPALCO is developing a diverse set of local renewable energy resources to reduce dependence on mainland Washington State for energy and to reduce the regional need for fossil-fueled power. OPALCO’s load doubles in winter but solar production is roughly 20% of levels reached in summer periods. Tidal energy is strong year-round, night and day, and is predictable, requiring much less storage to firm it. To assess the technical and economic feasibility of tidal power, working in combination with multiple other distributed energy resources (DERs), Argonne National Laboratory (Argonne) employed an optimization model to evaluate several economic benefits associated with varying scales of tidal power of between 2.4 and 9.6 megawatts (MW) and other DERs. In addition to existing photovoltaic (PV) and battery energy storage system (BESS) resources located on Decatur Island, Argonne also evaluated the addition of a BESS on southern Orcas Island with power and energy capacities ranging from 1-4 MW and 2-4 hours in storage duration.
Active Aerodynamic Load Control for Wind Turbines
The goal of this project was to develop and demonstrate an advanced dielectric barrier discharge (DBD) plasma actuator technology. We set out to demonstrate the efficacy and impact of the new actuator technology as a key component of an active load control system for wind turbines. A DBD plasma actuator consists of a thin layer of dielectric material separating a pair of offset electrodes. One of those electrodes is embedded between the dielectric layer and a non-conductive substrate, while the other is exposed to air. When driven by an appropriate high voltage waveform, the device ionizes the air near the surface of the dielectric and adjacent to the exposed electrode. Collisions between the ions in the plasma and neutral air molecules result in a wall-jet – a region of induced air velocity that can be used to modify the flow around a lifting body. Use of the device near the trailing edge of a wind turbine blade, designed in such a way as to amplify the effects of the flow-modifying device, can result in large changes to the global forces experienced by the blade. Because of the fast response time of the device, it can allow the turbine to react in real time to changes in the wind associated with turbulence, wind shear, gusts, and the like, when paired with appropriate sensors and control algorithms. The goal of this project was to increase the capacity of the device to induce velocity on its surface at the levels required by large, utility-scale wind turbines. The first technical goal was to increase the induced velocity from the current industry-best of about 4 m/s to 10 m/s by modifying the electrical waveform used to drive the device and by introducing a semi-conductive surface coating to control electrostatic charge build-up on the surface. The second goal was to use the device to modify the lift on a representative airfoil in a wind tunnel, demonstrating a reduction in lift coefficient of 0.2 or better. The third goal was to produce an actuator-induced velocity of 20 m/s. Alongside our partners at the University of Texas at Dallas, we also applied modern, advanced design methods to optimize the impact of the technology on the design of wind turbines. We also had planned to install a segmented, active load control system on a test turbine to demonstrate the ability to reduce unsteady aerodynamic forces on the turbine associated with changes in the wind. The highest induced velocity achieved during this research was 11 m/s. However, practical design constraints limited the change in lift coefficient to about 0.12 for a representative airfoil in the wind tunnel at a Reynolds number of 400,000. The primary conclusion is that the plasma actuator control authority remains insufficient for practical purposes when extrapolated to Reynolds numbers over 1 million. The potential impact of the active lift control concept was evaluated through detailed simulations for three wind turbine sizes: a 3.4MW onshore turbine, a 10MW offshore turbine, and a 15MW offshore turbine. A feedback control system was designed for each turbine within two scenarios: one where the active lift control is used as a retrofit capability on the baseline design, and the other where the designers were permitted to “upscale” the turbines in order increase annual energy production. The levelized cost of energy was then evaluated for the range of turbine sizes and design configuration. It was found that the LCOE reduction associated with active lift control fell in the range of 0.7% to 7.2%, with the highest reduction associated with upscaling the 3.4MW turbine.
2023 IEDO Peer Review Report
On behalf of the U.S. Department of Energy (DOE) Industrial Efficiency and Decarbonization Office (IEDO), we are pleased to share the report from our 2023 peer review. Peer review provides us with invaluable insight into our office strategy and program direction from a diverse group of external thought leaders. The findings and actionable recommendations from peer review inform our decision making and help us maintain a constant state of evolution and growth.
NSTX-U National Research Program: White Paper in Response to Call from FESAC Sub-Committee
Both scientific and technical innovation is needed for the realization of an attractive engineering solution for a timely and cost-effective Pilot Plant, the design and construction of which is the overarching recommendation of the FESAC Long Range Plan, and the 2021 NASEM Pilot Plant reports, which underpin the Bold Decadal Vision. The two most significant plasma physics gaps to close for a Compact Pilot Plant (CPP) are core confinement improvement and heat flux mitigation, neither of which have been closed in an integrated fashion for any planned fusion power production device. High core confinement and stability are essential for producing majority self-driven plasmas in CPPs with reduced size and auxiliary heating power requirements, with an improvement in confinement being the major driver for cost reduction of a CPP. The National Spherical Tokamak Experiment - Upgrade (NSTX-U) is a unique low aspect ratio research facility that will address the fundamental challenge of developing the science and technology basis for a CPP design that integrates high core and edge confinement with the ability to mitigate very high incident heat fluxes. NSTX-U capabilities will enable the high performance, already achieved on NSTX, to extend into physics regimes much closer to those anticipated in Spherical Tokamak (ST)-based CPPs. These confinement and stability properties will be assessed by a full complement of diagnostics and analysis tools, which will also aid in the development of the underlying theory and predictive models needed for further optimization. Both conventional and transformative heat flux mitigation methods, such as liquid lithium plasma-facing components, will be developed and tested in-situ in NSTX-U at incident heat fluxes of ~100 MW/m 2 , and will inform plans and reduce risk for a subsequent major upgrade to the device to fully heated, high-Z wall and full liquid lithium divertor capability, a technology that potentially could then be implemented on any magnetic confinement device at any aspect ratio. NSTX-U research is fully complementary to programs performed on other STs, nationally and internationally. Furthermore, NSTX-U research has a direct connection to the private sector by informing design choices for future power production facilities being developed by these companies. The NSTX-U program will operate as a national User Facility, with collaborating researchers, engineers, and graduate students from 19 outside institutions, and open to participation and experiments led by researchers from both public and private entities. The research program will advance workforce development through training of young scientists, engineers, and technicians, and it will also serve for further diagnostic innovation, especially for high heat flux and high-Z wall environments, and implementation of advanced artificial intelligence (AI) for plasma and heat flux control.
Python-Cubit ® Enhancement Scripts: 16.14
The Python-Cubit ® enhancement code base is intended to be used as an extension to already existing Cubit ® functionality. It provides the user with a number of functionalities that are either currently outside the realm of the python functions which Cubit ® supplies internally (such as vector math), or that are comprised of commonly used combinations of already existing python functionalities (such as removing a full round from a slot cut). The foreseen style of use for many of these scripts is to utilize volume names and geometric data such as surface area, surface type, etc. as a way to filter out geometries, and provide a powerful id-less method. These filters combined with a number of already existing python functionalities such as the set() operator and zip() function can be used to operate on many geometries at a single time without a need for the user to manually select them or use their ids. Please refer to the example given in the documents examples section for a demonstration of the work flow.
Fast and Robust Conversion of CAD to Structured Grid Volume Fractions
Explore the source record for details and available documents.
Linearization Errors in Discrete Goal-Oriented Error Estimation
Explore the source record for details and available documents.
A Goal-oriented Approach to Model Form Error for Constitutive Models.
Explore the source record for details and available documents.
The Fourth Sandia Fracture Challenge: Predicting Puncture In A Metal Structure
Explore the source record for details and available documents.
FLEXO: Next Generation Capabilities for Pulsed Power Experimental Design
Explore the source record for details and available documents.
Quantifying Data Uncertainty in Scientific Machine Learning
Explore the source record for details and available documents.