Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NATURAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The Case for Natural Gas Fueled Solid Oxide Fuel Cell Power Systems for Distributed Generation

Natural-gas-fueled solid oxide fuel cell (NGSOFC) power systems yield electrical conversion efficiencies exceeding 60% and may become a viable alternative for distributed generation (DG) if stack life and manufacturing economies of scale can be realized. Currently, stacks last approximately 2 years and few systems are produced each year because of the relatively high cost of electricity from the systems. If mass manufacturing (10,000 units per year) and a stack life of 15 years can be reached, the cost of electricity from an NGSOFC system is estimated to be about 7.7 ¢/kWh, well within the price of commercial and residential retail prices at the national level (9.9-10¢/kWh and 11-12 ¢/kWh, respectively). With an additional 5 ¢/kWh in estimated additional benefits from DG, NGSOFC could be well positioned to replace the forecasted 59-77 gigawatts of capacity loss resulting from coal plant closures due to stricter emissions regulations and low natural gas prices.

distributed generation↗

Quantifying the influence of natural climate variability on in situ measurements of seasonal total and extreme daily precipitation

Abstract While various studies explore the relationship between individual sources of climate variability and extreme precipitation, there is a need for improved understanding of how these physical phenomena simultaneously influence precipitation in the observational record across the contiguous United States. In this work, we introduce a single framework for characterizing the historical signal (anthropogenic forcing) and noise (natural variability) in seasonal mean and extreme precipitation. An important aspect of our analysis is that we simultaneously isolate the individual effects of seven modes of variability while explicitly controlling for joint inter-mode relationships. Our method utilizes a spatial statistical component that uses in situ measurements to resolve relationships to their native scales; furthermore, we use a data-driven procedure to robustly determine statistical significance. In Part I of this work we focus on natural climate variability: detection is mostly limited to DJF and SON for the modes of variability considered, with the El Niño/Southern Oscillation, the Pacific–North American pattern, and the North Atlantic Oscillation exhibiting the largest influence. Across all climate indices considered, the signals are larger and can be detected more clearly for seasonal total versus extreme precipitation. We are able to detect at least some significant relationships in all seasons in spite of extremely large (> 95%) background variability in both mean and extreme precipitation. Furthermore, we specifically quantify how the spatial aspect of our analysis reduces uncertainty and increases detection of statistical significance while also discovering results that quantify the complex interconnected relationships between climate drivers and seasonal precipitation.

54 ENVIRONMENTAL SCIENCES↗

A VR-based volumetric medical image segmentation and visualization system with natural human interaction

Volume rendering produces informative two-dimensional (2D) images from a 3-dimensional (3D) volume. It highlights the region of interest and facilitates a good comprehension of the entire data set. However, volume rendering faces a few challenges. First, a high-dimensional transfer function is usually required to differentiate the target from its neighboring objects with subtle variance. Unfortunately, designing such a transfer function is a strenuously trial-and-error process. Second, manipulating/visualizing a 3D volume with a traditional 2D input/output device suffers dimensional limitations. To address all the challenges, we design NUI-VR 2 , a natural user interface-enabled volume rendering system in the virtual reality space. NUI-VR 2 marries volume rendering and interactive image segmentation. It transforms the original volume into a probability map with image segmentation. A simple linear transfer function will highlight the target well in the probability map. More importantly, we set the entire image segmentation and volume rendering pipeline in an immersive virtual reality environment with a natural user interface. NUI-VR 2 eliminates the dimensional limitations in manipulating and perceiving 3D volumes and dramatically improves the user experience.

42 ENGINEERING↗

A Novel Environmentally Compatible Bio-Based Product from Gelatin and Natural Rubber: Physical Properties

The objective of the present work was to study the preparation of a novel bio-based product from gelatin (GT) and natural rubber (NR) using potassium persulphate (KPS) as an initiator. The GT and NR composites (GT/NR composites) containing KPS were formed in an aqueous latex solution. The chemical structure of the GT/NR composite was characterized by ATR-FTIR, and XRD. The highest tensile strength was observed in a 9/1 GT/NR composite and the elongation at break of this composite was improved by the addition of both NR and glycerol. In addition, the swelling ratio increased as a function of increasing GT content in the composite. The thermal stability of the GT was improved after the formation of the chemical interaction between the NR and GT helped by the KPS. The best ratio of the GT/NR composite was 3/7 GT/NR. This environmentally friendly composite easily decomposed in natural soil within 30 days. The novel biopolymer showed high mechanical properties, water resistance and was produced in an environmentally compatible process. The NR was able to improve some of the physical and mechanical properties of GT biofilms produced from the composite. Possible future applications of this composite are for medical materials, and the packaging and life extension of food products.

36 MATERIALS SCIENCE↗

A Novel Packaging Film from Cassava Starch and Natural Rubber

Currently, there is an environmental pollution problem generated in part by packaging materials produced from non-biodegradable synthetic polymers made from petroleum. However, these can be replaced with biodegradable materials made from cassava starch (CS) and natural rubber (NR). In the work described, a novel biopolymer film was obtained from the CS and NR using glycerol (GE) as a plasticizer in a water-based system. The physical properties of an 95/5 CS/NR blend films with the addition of NR and with varying GE contents were studied based on their swelling ratio, moisture content, moisture absorption, mechanical properties and biodegradability in soil. The results showed that the moisture content and moisture absorption tended to be directly proportional to the GE content, while the moisture content and moisture absorption of the sample decreased as a function of the NR content. The swelling ratio of the 95/5 CS/NR blend slightly decreased as a function of the NR and GE content. Surprisingly, the best swelling ratio of 350% was found at 10% NR. The elongation at break of the CS/NR blend was improved by the addition of GE. The contact angle of the 95/5 CS/NR blend decreased as a function of the GE. With increased NR in the composite, an increasing, trend in the contact angle was found. Further, the 95/5 CS/NR blend exhibited good transparency when it was applied as a coating to delay the ripening of bananas, the results were positive. Moreover, the film showed decomposition well in natural soil.

54 ENVIRONMENTAL SCIENCES↗

Fabrication and Properties of a Novel Porous Material from Biopolymer and Natural Rubber for Organic Compound Absorption

Maleate poly (vinyl alcohol) (PVAM)-graft water soluble polymer with deproteinized natural rubber (DPNR) porous materials were prepared using the freeze drying technique. The effect of the water soluble polymer type (chitosan (CS) and gelatin (GT)) and the DPNR content was studied. The mechanical properties of the porous materials were improved by the addition of the DPNR. The results showed that the addition of the DPNR improved the water resistance of the porous material. Many micro-voids were formed after the PVAM was grafted with the water soluble polymers as observed under SEM, leading to changes in porosity and density. The highest number of micro-voids was found in the PVAM-graft-chitosan (sPVAM-g-CS) sample while the minimum number of microvoids was found in the maleate poly (vinyl alcohol) (sPVAM). The swelling ratio of the nPVAM significantly improved after the freeze drying process. The PVAM-graft-gelatin (sPVAM-g-GT) gave the maximum swelling ratio in water. After the DPNR was added to the sPVAM-g-GT, the pore size of the porous material significantly decreased and the size distribution became narrower. The moisture absorption, moisture content and swelling ratio of the porous material decreased after blending with the DPNR but the tear strength and rebound resilience of the porous material was enhanced. The macroporous material was able to be reused the maximum number of over 30 times as organic compound-absorbent material and it easily decomposed in nature.

36 MATERIALS SCIENCE↗

Increased Use of Natural Gas in Blast Furnace Ironmaking: Mass and Energy Balance Calculations

In blast furnace ironmaking, coke can be partially replaced by injected natural gas. Tuyère injection of cold natural gas is commonly practiced in North America. In this work, limits to the tuyère injection rate have been quantified with mass and energy balances. The fundamental origin of the limits is the endothermicity of methane injection. In principle, shaft injection of preheated and partially combusted methane would obviate the endothermic effect. However, the thermal and chemical energy parameter indicates that the energy requirement in the lower part of the furnace—to melt hot metal and slag—might not be met in the case of shaft injection. Tuyère injection of preheated methane might be a feasible alternative. Calculated combustion kinetics support the feasibility of partial combustion of preheated methane (with sub-stoichiometric oxygen) before injection.

36 MATERIALS SCIENCE↗

Natural transformation as a tool in Acinetobacter baylyi : Streamlined engineering and mutational analysis

Natural transformation and homologous recombination in a soil bacterium, Acinetobacter baylyi ADP1, occur with exceptionally high efficiency. These genetic features can be harnessed to address a wide variety of fundamental and applied scientific topics. Recent advances in synthetic biology and laboratory evolution have led to renewed appreciation for the use of A. baylyi as a model organism. To complement several review articles that highlight new tool sets, this chapter focuses on simple protocols and examples of transformation assays that facilitate genetic analysis and engineering. Whole genome sequencing often reveals extensive genetic variation among closely related isolates that can confound the association of genotypic and phenotypic changes. In A. baylyi, such associations can be deciphered in unique ways by directly transforming cells with linear DNA fragments. The resulting allelic replacement, which occurs at high frequency, rapidly generates desired mutants via targeted chromosomal editing. Diverse screening and selection methods can be used to test hypotheses and streamline experimental strategies to reveal the significance of specific DNA sequences. Moreover, large procedural variations are well tolerated, and techniques can be readily adapted for new purposes. Furthermore, one goal of highlighting natural transformation methodology in A. baylyi is to expand the community of researchers using this versatile bacterial host.

59 BASIC BIOLOGICAL SCIENCES↗

Impact of Mg on Pd-based Methane Oxidation Catalysts for Lean-burn Natural Gas Emissions Control

More efficient lean-burn, natural gas engines are limited by greenhouse gas emissions due to methane oxidation catalysts (MOC) that suffer from water inhibition and high temperature activation. Herein, we report that the addition of Mg to supported 1 wt.% Pd MOCs improved hydrothermal stability even after severe hydrothermal aging. The superior methane oxidation activity compared to the corresponding Mg-free catalyst was attributed to (1) influence of Mg during surface roughening and restructuring at 700 °C on metal-support interaction, (2) reducibility of PdOx sites and (3) preferential stabilization of active Pd (1 0 0) facets in the sample as was evidenced by H 2 TPR and CO TPD characterization experiments. Methane conversion under synthetic exhaust conditions relevant to natural gas, lean-burn engines were investigated. In conclusion, BET, TPR, CO pulse chemisorption followed by TPD provided valuable insights into the surface area, pore volume, reducibility, Pd dispersion and Pd particle size of the selected catalyst samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambient and building condition effects modeling of air-cooled natural circulation systems

Throughout the testing program at Natural convection Shutdown heat removal Test Facility (NSTF), strong influences of ambient conditions were observed in the experimental data when baseline tests were repeated under identical test procedures. Significant analysis efforts were conducted to gain understanding of these influences, and quantify the system response of the test facility. In this paper, an empirical model was developed based on theoretical considerations and using experimental data to correlate zero-power system flow rates with ambient meteorological conditions, including wind and temperatures. Coefficients in the model were determined based on best fitting of the experimental data set. The predictive capability of the empirical model was demonstrated by applying it to new sets of experimental data. Finally, after implementing the empirical model in both system-level thermal fluids and computational fluid dynamics modeling of the facility, simulations from both approaches resulted in accurate predictions in system natural circulation flow rates.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Multi-stage heat pump with two-phase injection for cold climate applications implementing natural refrigerants

Heat pump adoption in cold climates is limited by various technical challenges, including heat capacity degradation, compressor deterioration, and frost accumulation on the outdoor heat exchanger. Furthermore, wide-spread adoption of heat pumps with high global warming potential presents a possible environmental concern. Thus, we present a heat pump concept termed the “saturation cycle,” which uses numerous compression stages to improve energy efficiency and injects two-phase refrigerant between compression stages to dramatically reduce compressor discharge temperatures. Given the growing interest in heat pumps, there is a need for a straightforward framework for parametric evaluation of natural refrigerants in high-efficiency heat pump cycle architectures, like the saturation cycle, in adverse climates. This work develops a thermodynamic modeling framework and focuses on the application of natural refrigerants to explore the performance trends at extremely cold climates down to −25 °C. This study shows that a two-stage saturation cycle and four-stage saturation cycle can reduce the compressor discharge superheating by up to 51–57 % or 73–80 %, respectively, depending on the refrigerant. Furthermore, at −25 °C, a two-stage R-290 saturation cycle heat pump theoretically can use 25 % less power than a single-stage heat pump or can provide up to 59 % more heating capacity when using the same compressor power as the baseline single-stage heat pump. The exergetic parametric analyses show that two-phase refrigerant injection fundamentally improves the thermodynamic performance of the heat pump, reducing overall exergy destruction by 10 % compared to a vapor-injection heat pump, compared at −25 °C. Thus, the saturation cycle is a promising heat pump cycle architecture for cold climate applications due to its superior energy savings (or capacity improvement) and substantial de-superheating capabilities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Role of c-Myb in the regulation of natural killer cell activity

Highlights: • c-Myb activity was downregulated by TGF-β in natural killer cells. • Celastrol, a c-Myb inhibitor, decreased NK-92 activity at low concentrations. • Celastrol downregulated NKG2D and granzyme B expression. • c-Myb knockdown downregulated NK-92 cytotoxicity and IFN-γ secretion. The regulation of natural killer (NK) cell activity is an important research goal for the development of immunotherapies. In this study, we identified transcription factors affecting NK cell activity. In particular, we screened transcription factors affected by interleukin-2 (IL-2) and transforming growth factor-beta (TGF-β) by protein/DNA arrays using primary NK cells. We found that celastrol, a c-Myb inhibitor, inhibited NK-92 cells more strongly than any other inhibitors of transcription factor candidates. In addition, c-Myb and c-Myb-related signaling molecules, e.g., Nemo-like kinase (NLK) and c-Myc, were regulated by the activation status of NK cells, suggesting that c-Myb is a key regulator of NK cell activity. We also found that celastrol inhibits NK-92-cell-mediated cytotoxicity via the downregulation of NKG2D and granzyme B. Knockdown studies also showed that c-Myb is important for NK cell activation. In particular, the knockdown of c-Myb did not significantly affect NK cell proliferation and survival but decreased the secretion of IFN-γ and the cytotoxicity of NK cells. Our data demonstrate that c-Myb plays a critical role in the activation of NK cells and therefore is a therapeutic target for cancer and viral diseases.

60 APPLIED LIFE SCIENCES↗

Understanding the influences of different pretreatments on recalcitrance of Populus natural variants

Here, four different pretreatment technologies were applied to two Populus natural variants and the effects of each pretreatment on glucose release were compared. Physicochemical properties of pretreated biomass were analyzed by attenuated total reflection Fourier transform infrared spectroscopy, gel permeation chromatography, and cross polarization/magic angle spinning carbon-13 nuclear magnetic resonance techniques. The results revealed that hemicellulose and lignin were removed to different extents during various pretreatments. The degree of polymerization of cellulose was decreased in the order of alkali > hydrothermal > organosolv > dilute acid pretreatment. Cellulose crystallinity index was slightly increased after each pretreatment. The results also demonstrated that organosolv pretreatment resulted in the highest glucose yield. Among the tested properties of Populus , degree of polymerization of cellulose was negatively correlated with glucose release, whereas hemicellulose and lignin removal, and cellulose accessibility were positively associated with glucose release from the two Populus natural variants.

60 APPLIED LIFE SCIENCES↗

Fundamental insights on ignition and combustion of natural gas in an active fueled pre-chamber spark-ignition system

Pre-chamber spark-ignition (PCSI), either fueled or non-fueled, is a leading concept with the potential to enable diesel-like efficiency in medium-duty (MD) and heavy-duty (HD) natural gas (NG) engines. However, the inadequate scientific base and simulation tools to describe/predict the underlying processes governing PCSI systems is one of the key barriers to market penetration of PCSI for MD/HD NG engines. To this end, experiments were performed in a heavy-duty, optical, single-cylinder engine fitted with an active fueled PCSI module. Furthermore, the spatial and temporal progress of ignition and subsequent combustion of lean-burn natural gas using PCSI system were studied using optical diagnostic imaging and heat release analysis based on main-chamber and pre-chamber pressure measurements.

42 ENGINEERING↗

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗

Comparative assessment of new oxygen carrier materials for gas switching reforming of natural gas: Techno-economics assessment, life cycle analysis, and experimental insights

The increasing demand for hydrogen and the CO 2 intensity of natural gas (NG) reforming motivate the development of low-carbon-emission hydrogen production technologies. Gas Switching Reforming (GSR) with integrated CO 2 capture, a technology based on Chemical Looping Reforming (CLR), has been experimentally proven and shows potential for scale-up. In this study, select oxygen carriers (OC) (NiO/Al 2 O 3 , Fe 2 O 3 -CeO 2 /Al 2 O 3 , and magnetite) were tested in methane steam reforming in a fixed bed reactor to determine their relative reactivities under relevant conditions for GSR (800 °C, 7 bar total pressure). Process models were then developed to perform techno-economic analysis (TEA) of GSR for hydrogen production (GSR-H 2 ) and a combined cycle (GSR-CC) in which high-purity H 2 is fired in a gas turbine to produce electricity. Operating at 10 bar and 1100 °C and with the additional recovery steps implemented increased H 2 production by ∼ 30% and improved efficiency relative to prior studies. For GSR-H 2 , the levelized cost of hydrogen (LCOH) is 1.61–1.64 $/kg-H 2 , competitive with a reference SMR case, though operating and maintenance costs are higher due to increased electricity demand. GSR-CC has a significantly higher levelized cost of electricity (LCOE) than its reference NGCC (natural gas combined cycle) plant, suggesting it is less competitive; however, increasing production scale could make it more attractive. Life-cycle results for GSR-H 2 indicate NG consumption drives ∼ 75% of total global warming impacts (∼2.3 kg CO 2 eq/kg H 2 ). An environmental, health, and safety screening suggests iron-based carriers are comparatively safer, whereas NiO may pose greater risks. Overall, GSR-H 2 is a scalable, competitive option for hydrogen production using nickel and non-nickel OC.

03 NATURAL GAS↗

Neural operators for stochastic modeling of nonlinear structural system response to natural hazards

Traditionally, neural networks have been employed to learn the mapping between finite-dimensional Euclidean spaces. However, recent research has opened up new horizons, focusing on the utilization of deep neural networks to learn operators capable of mapping infinite-dimensional function spaces. Here, in this work, we employ two state-of-the-art neural operators, the deep operator network (DeepONet) and the Fourier neural operator (FNO) for the prediction of the nonlinear time history response of structural systems exposed to natural hazards, such as earthquakes and windstorms. Specifically, we propose two architectures, a self-adaptive FNO and a fast Fourier transform-based DeepONet (DeepFNOnet), where we employ a FNO beyond the DeepONet to learn the discrepancy between the ground truth and the solution predicted by the DeepONet. To demonstrate the efficiency and applicability of the architectures, two problems are considered. In the first, we use the proposed model to predict the seismic nonlinear dynamic response of a six-story shear building subject to stochastic ground motions. In the second problem, we employ the operators to predict the wind-induced nonlinear dynamic response of a high-rise building while explicitly accounting for the stochastic nature of the wind excitation. In both cases, the trained metamodels achieve high accuracy while being orders of magnitude faster than their corresponding high-fidelity models.

DeepONet↗

Comparative Analysis of Natural Gas Cogeneration Incentives on Electricity Production in Latin America

An analysis to assess the influence of country-dependent variables and incentives on the feasibility of natural gas cogeneration projects in Latin America is presented in this work. The analysis is performed using a hypothetical industrial plant, where the cogeneration solution consists in the recovery of waste heat from the power generation for steam production. The feasibility is evaluated by calculating the Return of Investment (ROI) and the Internal Rate of Return (IRR) of the project. Eight Latin American countries are studied considering their specific natural gas markets, regulation, and macroeconomic variables. Two scenarios, electricity production for self-consumption and electricity production with power surplus sale, are independently analyzed considering the effects of available incentives. In the countries where the project is feasible, the application of incentives leads to a significant reduction in the ROI and, consequently, to an increment in the IRR. The effect of the interest rate and environmental impact were also analyzed. In general terms, along the region, the regulation for cogeneration is incipient while incentives are very standard and similar respect to lowering of import, Value-Added Tax (VAT), and income taxes, which seems to be designed purely to promote capital investment. Following the results from this study, it is of paramount importance to create new policy instruments in the future to advance the regulatory framework for cogeneration in Latin America.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗