Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Sodium Carbazolide and Derivatives as Solid‐State Electrolytes for Sodium‐Ion Batteries

Abstract Replacing widely used organic liquid electrolytes with solid‐state electrolytes (SSEs) could effectively solve the safety issues in sodium‐ion batteries. Efforts on seeking novel solid‐state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na‐CZ) and its THF‐coordinated derivatives are rationally fabricated as Na + conductors, and two of their crystal structures are successfully solved. Among these materials, THF‐coordinated complexes exhibit fast Na + conductivities, i.e., 1.20×10 −4 S cm −1 and 1.95×10 −3 S cm −1 at 90 °C for Na‐CZ‐1THF and Na‐CZ‐2THF, respectively, which are among the top Na + conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low‐cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na + migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na + .

Yu, Yang↗

Drawing with Iron on a Gel Containing a Supramolecular Siderophore

Guanosine-5'-hydroxamic acid (3) forms hydrogels when mixed with guanosine (1) and KCl. The 5'-hydroxamic acid (HA) unit is pH-responsive and also chelates Fe 3+ . When gels are prepared under basic conditions, the 5'-HA groups are deprotonated and the anionic hydrogel binds cationic thiazole orange (TO), signaled by enhanced fluorescence. The HA nucleoside 3, when immobilized in the G-quartet gel, acts as a supramolecular siderophore to form red complexes with Fe 3+ . We patterned the hydrogel's surface with FeCl 3 , by hand and by using a 3D printer. Patterns form instantly, are visible by eye, and can be erased using vitamin C. This hydrogel, combining self-assembled G-quartet and siderophore–Fe 3+ motifs, is strong, can be molded into different shapes, and is stable on the bench or under salt water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sodium Carbazolide and Derivatives as Solid‐State Electrolytes for Sodium‐Ion Batteries

Abstract Replacing widely used organic liquid electrolytes with solid‐state electrolytes (SSEs) could effectively solve the safety issues in sodium‐ion batteries. Efforts on seeking novel solid‐state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na‐CZ) and its THF‐coordinated derivatives are rationally fabricated as Na + conductors, and two of their crystal structures are successfully solved. Among these materials, THF‐coordinated complexes exhibit fast Na + conductivities, i.e., 1.20×10 −4 S cm −1 and 1.95×10 −3 S cm −1 at 90 °C for Na‐CZ‐1THF and Na‐CZ‐2THF, respectively, which are among the top Na + conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low‐cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na + migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na + .

Yu, Yang↗

Application of Poly(ether sulfone)‐Based Membranes in Clean Energy Technology

Abstract Poly(ether sulfone) (PES) is a kind of polymer materials with excellent electrical insulation and acid/alkali stability. PES can be operated at high temperature continuously for a long time and still maintain excellent property stability in the environments with rapidly changed temperature, namely, great thermostability. Moreover, PES has low molding shrinkage, good dimensional stability and excellent film‐forming characteristics. Compared with inorganic membranes, PES‐based membranes have lower cost, which have received more attention and wide recognition in the field of clean energy technologies in recent years, such as flow batteries, fuel cells, water treatment, and gas separation. Therefore, this review summarizes the research status and prospect of the utilization of PES‐based membranes in clean energy fields, in order to further promote their development and application.

Chemistry↗

The lanthanide contraction beyond coordination chemistry

Lanthanide chemistry is dominated by the ‘lanthanide contraction’, which is conceptualized traditionally through coordination chemistry. Here we break this mold, presenting evidence that the lanthanide contraction manifests outside of the coordination sphere, influencing weak interactions between groups of molecules that drive mesoscale-assembly and emergent behavior in an amphiphile solution. Furthermore, changes in these weak interactions correlate with differences in lanthanide ion transport properties, suggesting new forces to leverage rare earth separation and refining. Our results show that the lanthanide contraction paradigm extends beyond the coordination sphere, influencing structure and properties usually associated with soft matter science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wear measurement of highly cross-linked UHMWPE using a 7 Be tracer implantation technique

The very low wear rates achieved with the current highly cross-linked ultra-high molecular weight polyethylenes (UHMWPE) used in joint prostheses have proven to be difficult to measure accurately by gravimetry. Tracer methods are therefore being explored. The purpose of this study was to effect a proof-of-concept on the use of the radioactive tracer beryllium-7 (7Be) for the determination of wear in a highly cross-linked orthopedic UHMWPE. Three crosslinked and four conventional UHMWPE pins made from compression-molded GUR 1050, were activated with 109 to 1010 7Be nuclei using a new implantation setup that produced a homogenous distribution of implanted nuclei up to 8.5 μm below the surface. The pins were tested for wear in a six-station pin-on-flat apparatus for up to 7.1 million cycles (178 km). A Germanium gamma detector was employed to determine activity loss of the UHMWPE pins at preset intervals during the wear test. The wear of the cross-linked UHMWPE pins was readily detected and estimated to be 17 ± 3 μg/Mc. The conventional-to-cross-linked ratio of the wear rates was 13.1 ± 0.8, in the expected range for these materials. It was estimated that implantation reduced the average wear rate by approximately 20%, and the oxidative degradation damage from implantation was negligible. Future applications of this tracer technology may include the analysis of location-specific wear, such as loss of material in the post or backside of a tibial insert.

Wimmer, Markus A.↗

Synergistic degradation performance of UV / TiO 2 photocatalysis and biotrickling filtration inoculated with Aspergillus sp. S1 for gaseous m ‐xylene

Abstract Background Biotricking filtration (BTF) based on absorption and biodegradation of waste gas by microorganisms in a biofilm can be used to degrade with difficulty hydrophobic volatile pollutants. Photocatalysis is a promising technology for the abatement of gaseous contaminants because of its nonselective oxidation of volatile organic compounds; however, photocatalysis technology has the limitations of high energy consumption and low mineralization efficiency. This study, therefore, aimed to investigate the synergistic effects of UV/TiO 2 photocatalysis (PCO) pretreatment and BTF in treating gaseous m ‐xylene. Results BTF incubated with a mold, Aspergillus sp. S1, was acclimated with m ‐xylene as the sole carbon source. A combined system of PCO with BTF was developed to remove gaseous m ‐xylene. The results showed that the startup period was shortened by 3 days in the PCO‐BTF combined system compared to that with BTF alone. The removal efficiency reached 73% and 91% for the BTF and PCO‐BTF systems respectively when the empty bed residence time was extended to 90 s. In addition, PCO‐BTF could withstand transient shock loading of m ‐xylene of 5000 mg m −3 and gradually restore its decontamination performance. Conclusions PCO pretreatment was effective in the enhancement of the removal capacity of BTF for m ‐xylene. The PCO‐BTF system proposed in this study provides an attractive alternative to abate hydrophobic volatile pollutants. The integration of PCO essentially prompted the capability of Aspergillus sp. S1 in the BTF unit, which paves the way for the treatment of gaseous waste at an industrial scale. © 2022 Society of Chemical Industry (SCI).

Du, Qingping↗

Surface modification of bamboo fiber with sodium hydroxide and graphene oxide in epoxy composites

Bamboo fibers (BFs) have high mechanical properties and are candidate reinforcement for epoxy matrix composites. However, to improve performance, good fiber-matrix interaction is required. In this work, unidirectional long BF reinforced epoxy composites at fiber volume content of 22%, 40%, and 50% were made by compression molding. The 40 v% untreated BF reinforced composites exhibited 107% and 439% increase for flexural strength and modulus, respectively, compared to neat epoxy. Sodium hydroxide (NaOH) treatment was used to modify the surface of the BFs, and then the NaOH modified BFs were coated with graphene oxide (GO). The 40 v% NaOH modified BF composites showed an improvement from 259.9 to 327.5 MPa for flexural strength and from 16.7 to 21.5 GPa for flexural modulus, compared to 40 v% untreated BF composites. Slight improvement in properties up to 334.6 MPa for flexural strength and up to 23.8 GPa for flexural modulus was achieved for composites made of 40 v% NaOH/GO modified BF. Surface modification of BF after the NaOH and NaOH/GO treatment was confirmed by X-ray photoelectron spectroscopy and by scanning electron microscopy, which showed differences on the fiber surface morphology and on the composite fracture surface. This BF surface modification approach with GO has potential to impart other properties beyond mechanical to produce multifunctional composite and lead to the use of sustainable plant fibers as alternatives to synthetic fibers.

36 MATERIALS SCIENCE↗

A review of the fabrication methods and mechanical behavior of continuous thermoplastic polymer fiber–thermoplastic polymer matrix composites

Abstract Thermoplastic polymer fiber–thermoplastic polymer matrix composites (PPCs or PRFPs), often recognized as self‐reinforced or single polymer composites, are potential candidates for future advanced polymer composites because of various advantages ( e.g., recyclability, formability, low‐cost, ultra‐lightweight, environmental friendliness, etc.). The manufacturability and mechanical behavior of these composites compared to conventional carbon‐/glass‐/aramid‐fiber‐reinforced polymers is of great interest to the composites community, but there are a limited number of studies in this area. To this end, this paper reviewed fabrication methods with different processing parameters and mechanical behavior of uni‐/multi‐directional thermoplastic PPCs featuring continuous thermoplastic polymer fibers from limited data in the literature. It was shown that most specific behaviors (normalized by density) of these materials in various loading conditions (e.g., quasi‐static tension/shear/flexure, tension‐tension fatigue, and out‐of‐plane impacting, etc.) are comparable to or better than glass‐/aramid‐fiber‐reinforced polymers. Particularly, the specific ductility in the foregoing conditions outperforms all the carbon‐/glass‐/aramid‐fiber‐reinforced polymers. Thermoplastic PPCs with remarkable performance can be achieved through several uncomplicated methods (e.g., film stacking, hot compaction, powder and solution impregnations, matrix infusion and injection molding, additive manufacturing, etc.), which have some similarities to the methods used for carbon‐/glass‐/aramid‐fiber‐reinforced polymers. Moreover, several opportunities and challenging problems of thermoplastic PPCs were summarized at the end of this review paper. Efficient solutions may require countless efforts in the composites community to further strengthen the performance and understanding of thermoplastic PPCs for wide applications in various engineering fields in the future.

36 MATERIALS SCIENCE↗

Development of a Printable Prill Formulation Technique and Demonstration of Monomodal Prill Size on Compaction Density and Compressive Strength

Polymer-bonded explosive molding powder, or “prills,” are relied on for the fabrication of pressed high explosives since the 1950's. The wet granulation technique, also known as “slurry coating,” that is used to formulate prills, is a complex process that results in polydisperse and variable yields. This makes it difficult to study the mesoscale effect that prills have on the microstructure of a pressed article. The following study introduces a novel approach to energetic granulation that leverages techniques used in the additive manufacturing of paste-like energetic materials. This extrusion granulation, or prill printing technique, makes it possible to tailor the sizes and shapes of prills, allowing for their morphological influences to be studied in a controlled manner. The following work details the fabrication and characterization of four monomodal size lots of prills using an inert formulation (95 wt.% melamine, 5 wt.% polymer binder). Prills from each size lot were die-pressed using a fixed recipe to investigate how prill size impacts compaction density and therefore compressive strength. It was found that larger prills influence the pressing density by creating larger defects within the microstructure of a pressed article, resulting in a decrease in compressive strength.

direct ink write↗

Laboratory-scale Investigation of the Influence of Ageing on the Performance and Sensitivity of an Explosive Containing ϵ-CL-20

Here, the performance and sensitivity of aged composite explosives based on the epsilon polymorph of hexanitrohexaazaisowurtzitane (ϵ–CL–20) have been evaluated with the laser–induced air shock from energetic materials (LASEM) technique using only milligram quantities of material. The LASEM results demonstrated reduced explosive performance (i.e., lower estimated detonation velocities) and higher sensitivity to ignition with increasing ageing. Chemical analysis of the explosive formulation subjected to ambient and accelerated aging was conducted to help understand the LASEM results. The Fourier Transform Infrared (FTIR) spectra revealed no evidence for conversion to lower–energy polymorphs. Based on the desorption gas chromatography/mass spectrometry (D–GC/MS) results, the observed decrease in performance and increase in sensitivity for the explosive powder aged at 100 °C (relative to ambient and 70 °C aging) have been attributed to changes related to solvent inclusions in the molding powders.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Extrusion‐Spheronization of Energetic Materials

The prevailing method to produce plastic‐bonded explosive (PBX) molding powder, or “prills”, is a complex, multiphase, and bespoke process that was developed by the high explosives (HEs) manufacturing industry several decades ago. This work demonstrates the utility of a simpler, widely‐used mechanical process—extrusion‐spheronization—to produce PBX prills. We begin by detailing precautions taken to enable safe remote operation of extrusion‐spheronization equipment with HE. We then perform a study investigating the effect of lacquer solvent composition on the particle packing, pressed density, and compressive strength properties of a 95 wt.% TATB/5 wt.% polymer binder formulation akin to PBX 9502. It was found that increased composition of low vapor pressure solvents caused prolonged retention of the solvent, resulting in tackier materials that would agglomerate and form larger prills. The larger prills also led to lower poured density and tapped density of HE prills and compressive strength of pressed PBX articles. The samples prepared with a 75% propyl acetate/25% butyl acetate lacquer solvent composition exhibited the highest compressive strength. However, it is believed that the prill packing and compressive strength properties are primarily driven by the prill size rather than the chemical composition of the lacquer itself. Extrusion‐spheronization remains a promising method to reliably and repeatably produce HE prills that is less sensitive to feedstock or process variation than traditional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchically Structured Vitrimer Biocomposites for Sustainable Manufacturing

Polymers containing dynamic covalent bonds (DCBs) exhibit thermoplastic-like flow above their topology freezing temperature (T v ) while maintaining thermoset-like properties below it, making them promising for sustainable manufacturing. However, their large-scale adoption remains limited due to challenges in accurately determining T v and achieving efficient fiber-matrix bonding in composite applications. Here, hierarchically structured epoxy-anhydride-based polyester vitrimer composites reinforced with cellulosic filaments is demonstrated, where hydroxyl groups on fiber surfaces participate directly in transesterification with the matrix. Further, this dynamic interfacial bonding delivers exceptional mechanical properties, including ≈70 MPa shear strength and >10% strain-to-failure, while enabling thermal malleability. Using a combination of nuclear magnetic resonance and nano-infrared spectroscopies, direct evidence is provided that chemical bond exchange begins well below the conventionally measured T v , supporting the hypothesis that rheologically determined T v reflects a combination of chemical exchange and frictional dynamics rather than a discrete transition. The composites demonstrate excellent processability through vacuum-assisted resin transfer molding and maintain >90% of their mechanical properties after multiple thermal reforming cycles. These findings advance both the fundamental understanding of vitrimeric transitions and the practical development of sustainable, high-performance composite materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Additive Manufacturing of Island Grain Bicrystals

We demonstrate cylindrical island grain bicrystals grown via a hybrid additive manufacturing/directional solidification technique. The island grain bicrystal is formed using a specialized mold in which one grain (the island) is enveloped by another larger grain (the surrounding matrix). The grain boundary plane orientation varies continuously around the circumference of the island grain, making these specimens ideal for probing grain boundary structure–property relations. We report thermal groove angle measurements along the grain boundary in a tin island grain bicrystal which show the grain boundary energy as a function of a single degree of freedom in the five-dimensional grain boundary parameter space.

Ware, Logan↗

Improving the Mechanical Properties of Cast Aluminum Via Ultrasonication-Induced Microstructural Refinement

One barrier to the broader use of cast aluminum alloys in automotive applications is their poor mechanical properties, especially compared to wrought materials. This study investigates the use of ultrasound to refine the microstructure of cast aluminum alloys during solidification and thus improve their mechanical properties. An A356 aluminum alloy (Al-Si-Mg) with added Fe (to mimic a recycle-grade alloy) was cast in a graphite mold with the simultaneous application of ultrasound. Tensile specimens were extracted from the castings and heat treated to a T6 temper. Ultrasonication during casting transformed the morphology of primary aluminum grains from dendritic (~140 microns in size) to globular (~36 microns in size), increased the ultimate tensile strength by 10 %, and tripled the ductility compared to casting without ultrasound. This improvement in strength and ductility demonstrates the potential for ultrasonic processing to improve the performance of cast aluminum alloys without altering their chemistry or additional post-processing.

Aluminum, Solidification, Ultrasound, Grain refinm↗

Casting Characteristics of High Cerium Content Aluminum Alloys

This paper compares the castability of the near eutectic aluminum-cerium alloy system to the aluminum-silicon and aluminum-copper systems. The alloys are compared based on die filling capability, feeding characteristics and tendency to hot tear in both sand cast and permanent mold applications. The castability ranking of the binary Al–Ce systems is as good as the aluminum-silicon system with some deterioration as additional alloying elements are added. In alloy systems that use cerium in combination with common aluminum alloying elements such as silicon, magnesium and/or copper, the casting characteristics are generally better than the aluminum-copper system. In general, production systems for melting, de-gassing and other processing of aluminum-silicon or aluminum-copper alloys can be used without modification for conventional casting of aluminum-cerium alloys.

36 MATERIALS SCIENCE↗

Large-scale reactive thermoset printing: Complex interactions between temperature evolution, viscosity, and cure shrinkage

Thermoset composites are strong candidates for large-scale material extrusion additive manufacturing (AM). However, uncured thermoset composites become unstable as print height increases. Here, chemical initiation of vinyl ester immediately before deposition was used to suppress collapse and enable large-scale thermoset printing. Structural stability was assessed by printing thin walls at various layer times and monitoring thermal gradients with an infrared camera. Stable printing was observed at a layer time of 4.50 min, approximately half the gel time of the material (8 min). Self-weight collapse occurred at short layer time (0.68 min), whereas warpage occurred at long layer time (6.50 min). Here, a new behavior was discovered at intermediate layer time (2.25 min) where the heat generated by the reaction causes new, un-gelled layers to flow. Forced convection eliminates this behavior, stabilizing the 2.25-min layer time print. These findings motivated development of a less exothermic material system, which was used to print a large-scale mold and demonstrate the value of this understanding. By presenting these challenges of large-scale reactive thermoset AM for the first time, this work motivates focused studies of the complex interplay between rheological, thermal, and chemical behaviors to improve the feasibility of large-scale thermoset AM. Tensile properties of the printed material were also measured. Longitudinal and transverse elastic moduli are 3.79 and 2.95 GPa, respectively, and corresponding tensile strengths are 36.11 and 18.83 MPa. The glass transition temperature is 93.13 °C.

36 MATERIALS SCIENCE↗

Design, Implementation, Simulation, and Visualization of a Highly Efficient RIM Microfluidic Mixer for Rapid Freeze-Quench of Biological Samples

Rapid freeze-quench (RFQ) trapping of short-lived reaction intermediates for spectroscopic study plays an important role in the characterization of biological reactions. Recently, there has been considerable effort to achieve sub-millisecond reaction deadtimes. We present here a new, robust, high-velocity microfluidic mixer that enables such rapid freeze-quenching. It is a based on the mixing method of two impinging jets commonly used in reaction injection molding of plastics. This method achieves efficient mixing by inducing chaotic flow at relatively low Reynolds numbers (Re = 140). We present the first mathematical simulation and microscopic visualization of mixing in such RFQ micromixers, the results of which show that the impinging solutions efficiently mix within the mixing chamber. These tests, along with a practical demonstration in an RFQ setup that involves copper wheels, show that this new mixer can in practice provide reaction deadtimes as low as 100 µs.

59 BASIC BIOLOGICAL SCIENCES↗