Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MASS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Separation of Copper Isotopes in the Laser Plume

Isotopic separation was observed during ablation of standard copper samples by a nanosecond Nd-YAG laser and a femtosecond Ti:sapphire laser at 266 nm. A time-of-flight mass spectrometer, orthogonal to the direction of the laser plume, was used to measure the isotopic composition of the plasma. A voltage was applied to the pulser at different delay times after the laser was ired in order to obtain a temporal profile as the plume expanded. The fraction of {sup 63}Cu in the plasma detected by the mass spectrometer reaches a maximum of 0.83 at 6 US and 3 {mu}s after the laser is fired for the nanosecond and femtosecond lasers respectively, before falling back to the natural abundance ratio of 0.69. As reported in the literature, the ion peaks are centered at two different delay times, representing fast and slow ion energy distributions. A mechanism based on the electric ield interactions between the electrons and ions is proposed to explain the separation of isotopes in the plume.

07 ISOTOPE AND RADIATION SOURCES↗

PROMINENCE ACTIVATION BY CORONAL FAST MODE SHOCK

An X5.4 class flare occurred in active region NOAA11429 on 2012 March 7. The flare was associated with a very fast coronal mass ejection (CME) with a velocity of over 2500 km s{sup −1}. In the images taken with the Solar Terrestrial Relations Observatory-B/COR1, a dome-like disturbance was seen to detach from an expanding CME bubble and propagated further. A Type-II radio burst was also observed at the same time. On the other hand, in extreme ultraviolet images obtained by the Solar Dynamic Observatory/Atmospheric Imaging Assembly (AIA), the expanding dome-like structure and its footprint propagating to the north were observed. The footprint propagated with an average speed of about 670 km s{sup −1} and hit a prominence located at the north pole and activated it. During the activation, the prominence was strongly brightened. On the basis of some observational evidence, we concluded that the footprint in AIA images and the ones in COR1 images are the same, that is, the MHD fast mode shock front. With the help of a linear theory, the fast mode Mach number of the coronal shock is estimated to be between 1.11 and 1.29 using the initial velocity of the activated prominence. Also, the plasma compression ratio of the shock is enhanced to be between 1.18 and 2.11 in the prominence material, which we consider to be the reason for the strong brightening of the activated prominence. The applicability of linear theory to the shock problem is tested with a nonlinear MHD simulation.

79 ASTRONOMY AND ASTROPHYSICS↗

Knudsen Effusion Mass Spectrometry: Principles and Applications

Knudsen Effusion Mass Spectrometry (KEMS) is a well-established technique in physical chemistry. First, we discuss the basic principles of the technique. It is based on a small enclosure which sets up a condensed/vapor near equilibria. A small, well-defined orifice allows the vapor to be sampled a mass spectrometer. Although the number of groups utilizing this method has decrease significantly from its height in 1960s, we will show that it is still useful for many problems in physical chemistry, materials science, geology, and nuclear science. Specific examples illustrate its versatility: Measurement of the enthalpy of formation of HfO(g); measurement of activities in the Ti-Al-O and Ni-Al systems; measurement of activities in several rare earth silicate systems; measurement of vapor pressures above olivine; dating of minerals with K/Ar method; and determination of adsorption/desorption behavior on nuclear fission products on graphite. These are only a small sampling of the many applications of this versatile technique.

Mass spectrometry, thermodynamics, high temperatur↗

Scalar dark matter and fermion coannihilations in the radiative seesaw model

By extending the Standard Model with three right-handed neutrinos (N{sub i}) and a second Higgs doublet (H{sub 2}), odd under a Z{sub 2} symmetry, it is possible to explain non-zero neutrino masses and to account for the dark matter. We consider the case where the dark matter is a scalar and study its coannihilations with the right-handed neutrinos. These coannihilations tend to increase, rather than reduce, the dark matter density and they modify in a significant way the viable parameter space of the model. In particular, they allow to satisfy the relic density constraint for dark matter masses well below 500 GeV. The dependence of the relic density on the relevant parameters of the model, such as the dark matter mass, the mass splitting, and the number of coannihilating fermions, is analyzed in detail. We also investigate, via a scan over the parameter space, the new viable regions that are obtained when coannihilations are taken into account. Notably, they feature large indirect detection rates, with (σv) reaching values of order 10{sup −24}cm{sup 3}s{sup −1}. Finally, we emphasize that coannihilation effects analogous to those discussed here can be used to reconcile a thermal freeze-out with a large (σv) also in other models of dark matter.

79 ASTRONOMY AND ASTROPHYSICS↗

NGC 1614: A Laboratory for Starburst Evolution

The modest extinction and reasonably face-on viewing geometry make the luminous infrared galaxy NGC 1614 an ideal laboratory for study of a powerful starburst. HST/NICMOS observations show: (1) deep CO stellar absorption, tracing a starburst nucleus about 45 pc in diameter; (2) surrounded by an approx. 600 pc diameter ring of supergiant H II regions revealed in Pa-alpha line emission; (3) lying within a molecular ring indicated by its extinction shadow in H - K; and (4) all at the center of a disturbed spiral galaxy. The luminosities of the giant H II regions in the ring axe extremely high, an order of magnitude brighter than 30 Doradus; very luminous H II regions, comparable with 30 Dor, are also found in the spiral arms of the galaxy. Luminous stellar clusters surround the nucleus and lie in the spiral arms, similar to clusters observed in other infrared luminous and ultraluminous galaxies. The star forming activity may have been initiated by a merger between a disk galaxy and a companion satellite, whose nucleus appears in projection about 300 pc to the NE of the nucleus of the primary galaxy. The relation of deep stellar CO bands to surrounding ionized gas ring to molecular gas indicates that the luminous starburst started in the nucleus and is propagating outward into the surrounding molecular ring. This hypothesis is supported by evolutionary starburst modeling that shows that the properties of NGC 1614 can be fitted with two short-lived bursts of star formation separated by 5 Myr (and by inference by a variety of models with a similar duration of star formation). The total dynamical mass of the starburst region of 1.3 x 10(exp 9) solar masses is mostly accounted for by the old pre-starburst stellar population. Although our starburst models use a modified Salpeter initial mass function (turning over near one solar mass), the tight mass budget suggests that the IMF may contain relatively more 10 - 30 solar masses stars and fewer low mass stars than the Salpeter function. The dynamical mass is nearly four times smaller than the mass of molecular gas estimated from the standard ratio of (C-12)O (1 - 0) to H2. A number of arguments place the mass of gas in the starburst region at approx. 25% of the dynamical mass, nominally about 1/15 and with an upper limit of 1/10 of the amount estimated from (C-12)O and the standard ratio.

Alonso-Herrero, A.↗

Open charm hadroproduction and the charm content of the proton

We advocate charmed-hadron inclusive hadroproduction as a laboratory to probe intrinsic charm (IC) inside the colliding hadrons. Working at next-to-leading order in the general-mass variable-flavor-number scheme endowed with nonperturbative fragmentation functions recently extracted from a global fit to e{sup +}e{sup -} annihilation data from KEKB, CESR, and LEP1, we first assess the sensitivity of Tevatron data of D{sup 0}, D{sup +}, and D*{sup +} inclusive production to the IC parametrizations provided by Pumplin et al. We then argue that similar data from pp collisions at RHIC would have the potential to discriminate between different IC models provided they reach out to sufficiently large values of transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TRUE MASSES OF RADIAL-VELOCITY EXOPLANETS

We study the task of estimating the true masses of known radial-velocity (RV) exoplanets by means of direct astrometry on coronagraphic images to measure the apparent separation between exoplanet and host star. Initially, we assume perfect knowledge of the RV orbital parameters and that all errors are due to photon statistics. We construct design reference missions for four missions currently under study at NASA: EXO-S and WFIRST-S, with external star shades for starlight suppression, EXO-C and WFIRST-C, with internal coronagraphs. These DRMs reveal extreme scheduling constraints due to the combination of solar and anti-solar pointing restrictions, photometric and obscurational completeness, image blurring due to orbital motion, and the “nodal effect,” which is the independence of apparent separation and inclination when the planet crosses the plane of the sky through the host star. Next, we address the issue of nonzero uncertainties in RV orbital parameters by investigating their impact on the observations of 21 single-planet systems. Except for two—GJ 676 A b and 16 Cyg B b, which are observable only by the star-shade missions—we find that current uncertainties in orbital parameters generally prevent accurate, unbiased estimation of true planetary mass. For the coronagraphs, WFIRST-C and EXO-C, the most likely number of good estimators of true mass is currently zero. For the star shades, EXO-S and WFIRST-S, the most likely numbers of good estimators are three and four, respectively, including GJ 676 A b and 16 Cyg B b. We expect that uncertain orbital elements currently undermine all potential programs of direct imaging and spectroscopy of RV exoplanets.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for the neutral current top quark decay t{yields}Zc using the ratio of Z-boson+4 jets to W-boson+4 jets production

We have used the Collider Detector at Fermilab (CDF-II) to search for the flavor-changing neutral-current (FCNC) top-quark decay t{yields}Zc using a technique employing ratios of W and Z production, measured in pp data corresponding to an integrated luminosity of 1.52 fb{sup -1}. The analysis uses a comparison of two decay chains, pp{yields}tt{yields}WbWb{yields}l{nu}bjjb and pp{yields}tt{yields}ZcWb{yields}llcjjb, to cancel systematic uncertainties in acceptance, efficiency, and luminosity. We validate the modeling of acceptance and efficiency for lepton identification over the multiyear data set using another ratio of W and Z production, in this case the observed ratio of inclusive production of W to Z bosons. To improve the discrimination against standard model backgrounds to top-quark decays, we calculate the top-quark mass for each event with two leptons and four jets assuming it is a tt event with one of the top quarks decaying to Zc. For additional background discrimination we require at least one jet to be identified as originating from a b quark. No significant signal is found and we set an upper limit on the FCNC branching ratio Br(t{yields}Zc) using a likelihood constructed from the llcjjb top-quark mass distribution and the number of l{nu}bjjb events. Limits are set as a function of the helicity of the Z boson produced in the FCNC decay. For 100% longitudinally-polarized Z bosons we find limits of 8.3% and 9.3% (95% C.L.) depending on the assumptions regarding the theoretical top-quark pair production cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE ONGOING ASSEMBLY OF A CENTRAL CLUSTER GALAXY: PHASE-SPACE SUBSTRUCTURES IN THE HALO OF M87

The halos of galaxies preserve unique records of their formation histories. We carry out the first combined observational and theoretical study of phase-space halo substructure in an early-type galaxy: M87, the central galaxy in the Virgo cluster. We analyze an unprecedented wide-field, high-precision photometric and spectroscopic data set for 488 globular clusters (GCs), which includes new, large-radius Subaru/Suprime-Cam and Keck/DEIMOS observations. We find signatures of two substructures in position-velocity phase space. One is a small, cold stream associated with a known stellar filament in the outer halo; the other is a large shell-like pattern in the inner halo that implies a massive, hitherto unrecognized accretion event. We perform extensive statistical tests and independent metallicity analyses to verify the presence and characterize the properties of these features, and to provide more general methodologies for future extragalactic studies of phase-space substructure. The cold outer stream is consistent with a dwarf galaxy accretion event, while for the inner shell there is tension between a low progenitor mass implied by the cold velocity dispersion, and a high mass from the large number of GCs, which might be resolved by a {approx}0.5 L* E/S0 progenitor. We also carry out proof-of-principle numerical simulations of the accretion of smaller galaxies in an M87-like gravitational potential. These produce analogous features to the observed substructures, which should have observable lifetimes of {approx}1 Gyr. The shell and stream GCs together support a scenario where the extended stellar envelope of M87 has been built up by a steady rain of material that continues until the present day. This phase-space method demonstrates unique potential for detailed tests of galaxy formation beyond the Local Group.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of the Reactive CO 2 Surface Flux in Electrocatalytic Aqueous Flow Reactors

We study how the mass transfer of a chemical species in shear flow is suppressed by the production of a second species that partially reacts away the first species. The second species is produced at the surface with the first species as a reactant. Our work is directly motivated by electrochemical CO 2 reduction in aqueous flow reactors, where OH– molecules generated by the CO evolution reaction react away CO 2 molecules, ultimately inhibiting the mass transfer of CO 2 to the cathode surface. We derive a simple approximation of the Sherwood number, a dimensionless measure of the mass flux into the surface, as a function of the Péclet number, surface Damköhler number, and bulk Damköhler number, and we compare our approximation to numerical solutions of the governing equations. We find that in the diffusion-limited regime, the Sherwood number is well described by the classical Graetz-Lévêque result reduced by a reaction factor due to the competing bulk reaction; with the stoichiometry relevant to electrochemical CO 2 reduction, this reaction factor is 1/2. While the model problem we solve provides insight into how OH– production affects CO 2 mass transfer, experimental systems often involve more complex chemistry. We thus also show how a common buffered electrolyte, KHCO 3 , affects our results.

30 DIRECT ENERGY CONVERSION↗

EVOLUTION OF CORONAL MASS EJECTION MORPHOLOGY WITH INCREASING HELIOCENTRIC DISTANCE. I. GEOMETRICAL ANALYSIS

At launch, coronal mass ejections (CMEs) are often approximated as locally cylindrical objects with circular cross sections. However, CMEs have long been known to propagate almost radially away from the Sun along with the bulk solar wind. This has important consequences for the structure of CMEs; an initially circular cross section will be severely flattened by this radial motion. Yet calculations of total flux and helicity transport by CMEs based on in situ observations still use the assumption of a locally cylindrical object. In this paper, we investigate the morphology of an interplanetary CME based upon geometric arguments. By radially propagating an initial cylindrical object that maintains a constant ratio between its expansion speed and bulk flow, A, we show that the flattening, or 'pancaking', of the two-dimensional cross section effectively ceases; the aspect ratios of these CMEs converge to a fixed value as they propagate further into the heliosphere. Thereafter the CME morphology is scale invariant. We predict aspect ratios of 5 {+-} 1 at terrestrial distances. By correlating a planetary shock with an interplanetary shock linked to a CME, these aspect ratios are estimated using in situ measurements in Paper II. These estimates are made at various heliocentric distances.

79 ASTRONOMY AND ASTROPHYSICS↗

Massive quiescent cores in Orion. V. The internal structures and physical and chemical properties of two extremely dense cores

We present a high-resolution (∼ 1.''5) observational study of two massive dust-gas cores, ORI8nw{sub 2} and ORI2{sub 6}, in the Orion molecular cloud using the Combined Array for Research in Millimeter-wave Astronomy. In each region the 3.2 mm continuum emission exhibits a dense and compact dust core at the center with 1-3 solar masses. The cores have number densities exceeding 10{sup 9} cm{sup –3}, which are among the highest volume densities observed in star-forming cores. In both regions the N{sub 2}H{sup +} shows clumpy structures that are spatially displaced from the densest gas. In OIR8nw{sub 2} in particular, the N{sub 2}H{sup +} shows a noticeable filament structure with a central cavity shell. The calculation for the dynamical state shows that this core can be potentially supported by the magnetic field against its gravitational instability, but the fragmentation might still occur and produce the observed N{sub 2}H{sup +} clumps if the gas density exceeds 5 × 10{sup 7} cm{sup –3} and this value is available within the observed density range. Also, the extremely high density at the core center suggests super-Jeans condition and the possibility for further fragmentation. For the chemical properties, the N{sub 2}H{sup +}-to-HCO{sup +} abundance ratios are shown to be different than those observed in infrared dark clouds. A combined analysis with the other Orion cores and the chemical model suggests that the different abundance ratios can be explained by the low CO abundances in our cores. To further reveal the evolution of such dense cores, higher resolution and sensitivity are required.

79 ASTRONOMY AND ASTROPHYSICS↗

ESTIMATES OF THE PLANET YIELD FROM GROUND-BASED HIGH-CONTRAST IMAGING OBSERVATIONS AS A FUNCTION OF STELLAR MASS

We use Monte Carlo simulations to estimate the number of extrasolar planets that are directly detectable in the solar neighborhood using current and forthcoming high-contrast imaging instruments. Our calculations take into consideration the important factors that govern the likelihood for imaging a planet, including the statistical properties of stars in the solar neighborhood, correlations between star and planet properties, observational effects, and selection criteria. We consider several different ground-based surveys, both biased and unbiased, and express the resulting planet yields as a function of stellar mass. Selecting targets based on their youth and visual brightness, we find that strong correlations between star mass and planet properties are required to reproduce high-contrast imaging results to date (i.e., HR 8799, {beta} Pic). Using the most recent empirical findings for the occurrence rate of gas-giant planets from radial velocity (RV) surveys, our simulations indicate that naive extrapolation of the Doppler planet population to semimajor axes accessible to high-contrast instruments provides an excellent agreement between simulations and observations using present-day contrast levels. In addition to being intrinsically young and sufficiently bright to serve as their own beacon for adaptive optics correction, A-stars have a high planet occurrence rate and propensity to form massive planets in wide orbits, making them ideal targets. The same effects responsible for creating a multitude of detectable planets around massive stars conspire to reduce the number orbiting low-mass stars. However, in the case of a young stellar cluster, where targets are approximately the same age and situated at roughly the same distance, MK-stars can easily dominate the number of detections because of an observational bias related to small number statistics. The degree to which low-mass stars produce the most planet detections in this special case depends upon whether multiple formation mechanisms are at work. Upon relaxing our assumption that planets in ultra-wide (a > 100 AU) orbits resemble the RV sample, our simulations suggest that the companions found orbiting late-type stars (AB Pic, 1RXSJ1609, GSC 06214, etc.) are consistent with a formation channel distinct from that of RV planets. These calculations explain why planets have thus far been imaged preferentially around A-stars and K-, M-stars, but no spectral types in between, despite concerted efforts targeting F-, G-stars.

79 ASTRONOMY AND ASTROPHYSICS↗

3D Printing in Zero G Technology Demonstration Mission: Summary of On-Orbit Operations, Material Testing, and Future Work

Human space exploration to date has been limited to low Earth orbit and the moon. The International Space Station (ISS), an orbiting laboratory 200 miles above the earth, provides a unique and incredible opportunity for researchers to prove out the technologies that will enable humans to safely live and work in space for longer periods of time and venture farther into the solar system. The ability to manufacture parts in-space rather than launch them from earth represents a fundamental shift in the current risk and logistics paradigm for human spaceflight. In particularly, additive manufacturing (or 3D printing) techniques can potentially be deployed in the space environment to enhance crew safety (by providing an on-demand part replacement capability) and decrease launch mass by reducing the number of spare components that must be launched for missions where cargo resupply is not a near-term option. In September 2014, NASA launched the 3D Printing in Zero G technology demonstration mission to the ISS to explore the potential of additive manufacturing for in-space applications and demonstrate the capability to manufacture parts and tools on-orbit. The printer for this mission was designed and operated by the company Made In Space under a NASA SBIR (Small Business Innovation Research) phase III contract. The overarching objectives of the 3D print mission were to use ISS as a testbed to further maturation of enhancing technologies needed for long duration human exploration missions, introduce new materials and methods to fabricate structure in space, enable cost-effective manufacturing for structures and mechanisms made in low-unit production, and enable physical components to be manufactured in space on long duration missions if necessary. The 3D print unit for fused deposition modeling (FDM) of acrylonitrile butadiene styrene (ABS) was integrated into the ISS Microgravity Science Glovebox (MSG) in November 2014 and phase I printing operations took place from November through December of that year. Phase I flight operations yielded 14 unique parts (21 total specimens) that could be directly compared against ground-based prints of identical geometry manufactured using the printer prior to its launch to ISS. The 3DP unit functioned safely and produced specimens necessary to advance the understanding of the critical design and operational parameters for the FDM process as affected by the microgravity environment. From the standpoint of operations, 3DP demonstrated the ability to remove parts from the build-tray on-orbit, teleoperate the printer from the ground, perform critical maintenance functions within defined human factors limits, produce a functional tool that could be evaluated for form/fit/function, and uplink a new part file from the ground and produce it on the printer. The flight parts arrived at NASA Marshall Space Flight Center in Huntsville, Alabama in April 2015, where they underwent months of testing in the materials and processes laboratory. Ground and flight prints completed the following phases of testing: photographic/visual inspection, mass and density evaluation, structured light scanning, XRay and CT, mechanical testing, optical microscopy, scanning electron microscopy, and chemical analysis. This presentation will discuss the results of this testing as well as phase II operations for the printer, which took place in June and July of 2016. Lessons learned from the tech demo and their impacts on the design and development of the second generation 3D printer for ISS, the Additive Manufacturing Facility (AMF) by Made In Space will also be presented. In addition, progress in other elements of NASA's In Space Manufacturing (ISM) initiative such as the on-demand ISM utilization catalog, in-space Recycler ISS Technology Demonstration development, launch packaging recycling, in-space printable electronics, development of higher strength polymeric materials for 3D printing and Additive Construction by Mobile Emplacement (ACME) will also be addressed.

Prater, Tracie↗

Majorana neutrinos and dark matter from anomaly cancellation

We discuss a simple theory for neutrino masses where the total lepton number is a local gauge symmetry spontaneously broken below the multi-TeV scale. In this context, the neutrino masses are generated through the canonical seesaw mechanism and a Majorana dark matter candidate is predicted from anomaly cancellation. We discuss in great detail the dark matter annihilation channels and find out the upper bound on the symmetry-breaking scale using the cosmological bounds on the relic density. Since in this context the dark matter candidate has suppressed couplings to the Standard Model quarks, one can satisfy the direct detection bounds even if the dark matter mass is close to the electroweak scale. This theory predicts a light pseudo-Nambu-Goldstone boson (the Majoron) associated to the mechanism of neutrino mass. We discuss briefly the properties of the Majoron and the impact of the big bang nucleosynthesis bounds. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

A note on physical mass and the thermodynamics of AdS-Kerr black holes

As with any black hole, asymptotically anti-de Sitter Kerr black holes are described by a small number of parameters, including a ''mass parameter'' M that reduces to the AdS-Schwarzschild mass in the limit of vanishing angular momentum. In sharp contrast to the asymptotically flat case, the horizon area of such a black hole increases with the angular momentum parameter a if one fixes M; this appears to mean that the Penrose process in this case would violate the Second Law of black hole thermodynamics. We show that the correct procedure is to fix not M but rather the ''physical'' mass E=M/(1−a{sup 2}/L{sup 2}){sup 2}; this is motivated by the First Law. For then the horizon area decreases with a. We recommend that E always be used as the mass in physical processes: for example, in attempts to ''over-spin'' AdS-Kerr black holes.

79 ASTRONOMY AND ASTROPHYSICS↗

Sensitivity of 44 Ti and 56 Ni Production in Core-collapse Supernova Shock-driven Nucleosynthesis to Nuclear Reaction Rate Variations

Recent observational advances have enabled high resolution mapping of 44 Ti in core-collapse supernova (CCSN) remnants. Comparisons between observations and models provide stringent constraints on the CCSN mechanism. However, past work has identified several uncertain nuclear reaction rates that influence 44 Ti and 56 Ni production in postprocessing model calculations. We evolved one-dimensional models of 15 M ⊙ , 18 M ⊙ , 22 M ⊙ , and 25 M ⊙ stars from zero age main sequence through CCSN using Modules for Experiments in Stellar Astrophysics and investigated the previously identified reaction rate sensitivities of 44 Ti and 56 Ni production. In this work, we tested the robustness of our results by making various assumptions about the CCSN explosion energy and mass cut. We found a number of reactions that have a significant impact on the nucleosynthesis of 44 Ti and 56 Ni, particularly for lower progenitor masses. Notably, the reaction rates ${}^{13}{\rm{N}}{(\alpha ,p)}^{16}{\rm{O}}$, ${}^{17}{\rm{F}}{(\alpha ,p)}^{20}\mathrm{Ne}$, ${}^{52}\mathrm{Fe}{(\alpha ,p)}^{55}\mathrm{Co}$, ${}^{56}\mathrm{Ni}{(\alpha ,p)}^{59}\mathrm{Cu}$, ${}^{57}\mathrm{Ni}{(n,p)}^{57}\mathrm{Co}$, ${}^{56}\mathrm{Co}{(p,n)}^{56}\mathrm{Ni}$, ${}^{39}{\rm{K}}{(p,\gamma )}^{40}\mathrm{Ca}$, ${}^{47}{\rm{V}}{(p,\gamma )}^{48}\mathrm{Cr}$, ${}^{52}\mathrm{Mn}{(p,\gamma )}^{53}\mathrm{Fe}$, ${}^{57}\mathrm{Co}{(p,\gamma )}^{58}\mathrm{Ni}$, and ${}^{39}{\rm{K}}{(p,\alpha )}^{36}\mathrm{Ar}$ are influential for a large number of model conditions. Furthermore, we found the list of influential reactions identified by previous postprocessing studies of CCSN shock-driven nucleosynthesis is likely incomplete, motivating future larger-scale sensitivity studies.

79 ASTRONOMY AND ASTROPHYSICS↗