Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MARTENSITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Selection of materials for sodium fast reactor steam generators

Sodium Fast Reactor (SFR) is considered in France as the most mature technology of the different Generation IV systems. In the short-term the designing work is focused on the identification of the potential tracks to demonstrate licensing capability, availability, in-service inspection capability and economical performance. In that frame materials selection for the major components, as the steam generator, is a particularly key point managed within a French Research and Development program launched by AREVA, CEA and EDF. The choice of the material for the steam generator is indeed complex because various aspects shall be considered like mechanical and thermal properties at high temperature, interaction with sodium on one side and water and steam on the other side, resistance to wastage, procurement, fabrication, weldability and ability for inspection and in-situ intervention. The following relevant options are evaluated: the modified 9Cr1Mo ferritic-martensitic grade and the Alloy 800 austenitic grade. The objective of this paper is to assess for both candidates their abilities to reach the current SFR needs regarding material design data, from AFCEN RCC-MRx Code in particular, compatibility with environments and manufacturability. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Radiation Effects in Innovative Structural Materials

The extreme radiation environments and demanding structural conditions of next-generation fission and proposed fusion reactors will require high performance materials with very high radiation resistance. Although conventional structural materials such as ferritic/ martensitic steels offer several attractive features, there is value in exploring alternative materials systems that may offer unprecedented radiation stability while also offering good thermomechanical properties. As noted elsewhere, options for designing radiation resistance include (a) the traditional approach of introducing a very high sink strength for recombination of radiation-induced vacancies and interstitials (e.g., Ti-modified stainless steels or 'nano-cluster-strengthened ferritic alloys', (b) utilizing materials with immobile vacancies at the operating temperature (e.g., silicon carbide), and (c) utilizing certain classes of materials that inherently exhibit superior resistance to radiation defect retention and accumulation (e.g., ferritic steels). Three relatively new but promising structural materials systems were selected for investigation, based on their favorable unirradiated mechanical properties and potential for good stability under irradiation: High entropy alloys (HEAs), bulk metallic glass (BMG), and MAX phase ceramics. The high configurational entropy in HEAs might alter point defect (solute and radiation defects) diffusion processes, thus potentially enhancing the recombination of radiation-produced damage. Therefore, HEAs offer the potential of a new class of materials for radiation resistance category (c) mentioned previously. A variety of BMGs such as Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} offer good mechanical properties including fracture toughness values that may exceed 100 MPa-m{sup 1/2} and near net shape fabrication potential. The lack of crystallinity in BMGs prohibits the formation of conventional Frenkel pair defects under irradiation and therefore offer the possibility of another new material system for radiation resistance category (c). MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) have good mechanical properties and contain a nano-laminate structure that could provide a very high point defect sink strength. Due to their refractory nature, many of the MAX phase ceramics may exhibit negligible vacancy mobility up to high temperatures. Therefore, MAX phase ceramics offer the potential to provide radiation resistance in either categories (a) and (b), depending on the operating temperature. For this study, a novel 27%Fe-27%Mn-28%Ni-18%Cr single phase face centered cubic high entropy alloy was synthesized that exhibited good strength and ductility over a wide temperature range. Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} (BAM-11) was selected as a prototypic advanced BMG. Several MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) that have good unirradiated thermal and mechanical properties were also investigated. The irradiation damage behaviors of these three novel materials systems have been studied after fission neutron at ∼75 deg. C up to 1 dpa and Ni ion irradiation at 25- 700 deg. C up to 30 dpa (lower temperatures and doses for the BMGs). All three sets of materials generally exhibited good radiation stability within certain temperature regimes. For example, the BMG exhibited only minor (<10%) change in strength that appeared to saturate after a dose of ∼1 dpa. A key shortcoming of current BMGs are that they can not be used at temperatures >>300 deg. C due to glass to crystalline transition at elevated temperature. The MAX phase ceramics irradiated at 400-700 deg. C appeared to be in the 'low temperature' regime where vacancies are immobile and therefore the radiation hardening saturated at relatively low doses. The Ti{sub 3}SiC{sub 2} MAX phase exhibited the best overall radiation stability over a wide temperature range. The HEA exhibited fine scale dislocation loop formation, no observable cavity swelling and reduced amounts of Cr depletion compared to traditional austenitic Fe-Cr-Ni alloys after ion irradiation, which suggests suppressed point defect and solute diffusion behavior. (authors)

36 MATERIALS SCIENCE↗

Accelerated Ion Irradiation for Emulation of In-reactor Radiation Damage

Reactor core materials in both fast reactors and LWRs granted life extension must withstand irradiation to high doses at high temperature. Ferritic-martensitic (F-M) alloys are attractive candidates for structural components and fuel cladding in fast and thermal reactors, and high chromium and high nickel-containing austenitic steels are potential replacement alloys for LWR core materials. To reach high doses, self-ion irradiation is conducted with simultaneous He injection into both F-M and austenitic alloys, accompanied by reactor irradiations conducted in the BOR-60 fast reactor to assess the capability of ion irradiation to emulate the evolution of microstructure and mechanical properties in reactor. Computational models for defect cluster evolution are being developed and benchmarked against experimental data to ultimately provide predictive capability for the response of both microstructure (loops, voids, precipitates, etc.), and mechanical properties (hardening, ductility, slip behavior) to irradiation. A research program is aimed at understanding how to emulate neutron irradiation using ion irradiation. Results to date have been focused on microstructure and properties of ion irradiated alloys T91, 800H and Fe21Ce32Ni. Data from single ion irradiations are thus far in good agreement with that expected based on previous ion and neutron irradiation data. Dual ion irradiations and neutron irradiated samples are being evaluated and these will be the focus of future work. (authors)

36 MATERIALS SCIENCE↗

Fusion-Driven Subcritical System FDS-SFB and Its Blanket Materials Activation Analysis

Fusion-fission hybrid reactor is a bridge between fusion and fission nuclear energy and it is a solution to overcome difficulties of fission energy development with the features of energy production, fuel breeding and waste transmutation. Many researches on fusion-fission hybrid reactor have been done in last decades. Fusion Driven Subcritical Spent Fuel Burning System (FDS-SFB) was proposed as an intermediate step toward the final application of fusion energy and designed to transmute the long-lived nuclear wastes from fission power plants and to produce fissile nuclear fuels for feeding fission power plants. The design of FDS-SFB is based on relatively easy-achieved plasma parameters extrapolated form the successful operation of the experimental advanced superconducting Tokamak (EAST) in China and other tokamaks in the world, and the subcritical blanket is designed based on the well-developed technologies of fission reactor. Materials activation characteristic is one of the key issues for hybrid reactor research. The activation of materials would substantially influence not only the safety of the reactors but also the recycling of used reactor materials. The selection of materials is very important to control the neutron-induced activation on fusion reactor as well as to ensure the attractiveness of fusion-fission nuclear power regarding safety and environmental aspects. The reduced activation ferritic-martensitic (CLAM) steel is preliminarily considered as the candidate structural materials for FDS-SFB. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of Irradiation Mode on Irradiated Microstructure of HT9

Core components in Generation IV fast reactors are expected to be exposed to very high damage levels of 200 displacements per atom (dpa) and above. Numerous issues with in-reactor irradiations including residual radioactivity, expense, length of irradiation and availability have led to increased interest in ion irradiation as a surrogate. Self-ion irradiations can produce damage rates of around 10{sup -3} dpa/s with well-controlled temperature, doses and dose rates, allowing for accelerated irradiation testing. Along with these benefits, ion irradiations have been shown to reproduce many of the same irradiation-induced features as in reactor irradiations. Of particular interest at high doses is formation of voids, precipitates and evolution of the dislocation microstructure. However, the beam mode under ion irradiation must be addressed. Raster scanning has been shown to produce microstructural features similar to those observed in-reactor irradiations, however, since they are a pulsed type irradiation, they may induce artifacts as a result of annealing between pulses. Defocused beams have the benefit of full coverage 100% of the time, but may be challenging in terms of ensuring even irradiation over a large area as well as in reaching high enough currents to maintain acceptable damage rates to be useful as a surrogate. This paper reports upon the comparison of behavior of ferritic martensitic steels under a raster scanned or defocused beam mode. The objective is to determine the effect of beam condition the irradiated microstructural; specifically, on the formation of voids, precipitates and dislocation loops and analyze these results within the context of the FDRT model. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Delocalization and hybridization enhance the magnetocaloric effect in Ni2Mn0.75Cu0.25Ga

In view of the looming energy crisis facing our planet, attention increasingly focuses on materials potentially useful as a basis for energy saving technologies. The discovery of giant magnetocaloric (GMC) compounds - materials that exhibit especially large changes in temperature as the externally applied magnetic field is varied - is one such compound 1. These materials have potential for use in solid state cooling technology as a viable alternative to existing gas based refrigeration technologies that use choro-fluoro - and hydro-fluoro-carbon chemicals known to have a severe detrimental effect on human health and environment 2,3. Examples of GMC compounds include Gd5(SiGe)4 4, MnFeP1-xAsx 5 and Ni-Mn-Ga shape memory alloy based compounds 6-8. Here we explain how the properties of one of these compounds (Ni2MnGa) can be tuned as a function of temperature by adding dopants. By altering the free energy such that the structural and magnetic transitions coincide, a GMC compound that operates at just the right temperature for human requirements can be obtained 9. We show how Cu, substituted for Mn, pulls the magnetic transition downwards in temperature and also, counterintuitively, increases the delocalization of the Mn magnetism. At the same time, this reinforces the Ni-Ga chemical bond, raising the temperature of the martensite-austenite transition. At 25percent doping, the two transitions coincide at 317 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HYDROGEN EFFECTS ON FRACTURE TOUGHNESS OF TYPE 316L STAINLESS STEEL FROM 175 K TO 425 K

The effects of hydrogen on the fracture-toughness properties of Type 316L stainless steel from 175 K to 425 K were measured. Fracture-toughness samples were fabricated from Type 316L stainless steel forgings and hydrogen-charged with hydrogen at 34 MPa and 623 K for two weeks prior to testing. The effect of hydrogen on the J-Integral vs. crack extension behavior was measured at various temperatures by fracturing non-charged and hydrogen-charged samples in an environmental chamber. Hydrogen-charged steels had lower toughness values than non-charged ones, but still retained good toughness properties. The fracture-toughness values of hydrogen-charged samples tested near ambient temperature were about 70% of non-charged values. For hydrogen-charged samples tested at 225 K and 425 K, the fracture-toughness values were 50% of the non-charged values. In all cases, fracture occurred by microvoid nucleation and coalescence, although the hydrogen-charged samples had smaller and more closely spaced microvoids. The results suggest that hydrogen effects on toughness are greater at 225 K than they are at ambient temperature because of strain-induced martensite formation. At 425 K, the hydrogen effects on toughness are greater than they are at ambient temperature because of the higher mobility of hydrogen.

08 HYDROGEN↗

Investigation of Failure Mode Induced by Plasticity Localization in Dual Phase Steel by Numerical Simulation

Due to the random composite microstructure of DP steels, its failure mode is unstable and the failure mechanism is still unclear. In this paper, the failure mode and mechanism of DP steel are studied by making use of the finite element numerical method, based on real microstructure of DP steel. 2D microstructure of DP steel is recorded by SEM and is used to numerical analysis after numerical image process. The work hardening plasticity of the ferrite phase is determined by synchrotron-based high-energy X-ray diffraction (HEXRD) technique. The work hardening performance of martensite phase is calibrated and determined by the re-analysis of the uniaxial tensile test of the DP steel sample. At different loading cases, the different failure modes due to plastic localization are predicted. It was found that the local failure mode is closely related to the stress state in the material.

36 MATERIALS SCIENCE↗

Characterization of the Fracture Toughness of TRIP 800 Sheet Steels Using Microstructure-Based Finite Element Analysis

Recently, several studies conducted by automotive industry revealed the tremendous advantages of Advanced High Strength Steels (AHSS). TRansformation Induced Plasticity (TRIP) steel is one of the typical representative of AHSS. This kind of materials exhibits high strength as well as high formability. Analyzing the crack behaviour in TRIP steels is a challenging task due to the microstructure level inhomogeneities between the different phases (Ferrite, Bainite, Austenite, Martensite) that constitute these materials. This paper aims at investigating the fracture resistance of TRIP steels. For this purpose, a micromechanical finite element model is developed based on the actual microstructure of a TRIP 800 steel. Uniaxial tensile tests on TRIP 800 sheet notched specimens were also conducted and tensile properties and R-curves (Resistance curves) were determined. The comparison between simulation and experimental results leads us to the conclusion that the method using microstructure-based representative volume element (RVE) captures well enough the complex behavior of TRIP steels. The effect of phase transformation, which occurs during the deformation process, on the toughness is observed and discussed.

36 MATERIALS SCIENCE↗

Magnetic field-induced phase transformation in NiMnCoIn magnetic shape memory alloys - a new actuation mechanism with large work output.

Magnetic shape memory alloys (MSMAs) have recently been developed into a new class of functional materials that are capable of magnetic-field-induced actuation, mechanical sensing, magnetic refrigeration, and energy harvesting. In the present work, the magnetic field-induced martensitic phase transformation (FIPT) in Ni{sub 45}Mn{sub 36.5}Co{sub 5}In{sub 13.5} MSMA single crystals is characterized as a new actuation mechanism with potential to result in ultra-high actuation work outputs. The effects of the applied magnetic field on the transformation temperatures, magnetization, and superelastic response are investigated. The magnetic work output of NiMnCoIn alloys is determined to be more than 1 MJ m{sup -3} per Tesla, which is one order of magnitude higher than that of the most well-known MSMAs, i.e., NiMnGa alloys. In addition, the work output of NiMnCoIn alloys is orientation independent, potentially surpassing the need for single crystals, and not limited by a saturation magnetic field, as opposed to NiMnGa MSMAs. Experimental and theoretical transformation strains and magnetostress levels are determined as a function of crystal orientation. It is found that [111]-oriented crystals can demonstrate a magnetostress level of 140 MPa T{sup -1} with 1.2% axial strain under compression. These field-induced stress and strain levels are significantly higher than those from existing piezoelectric and magnetostrictive actuators. A thermodynamical framework is introduced to comprehend the magnetic energy contributions during FIPT. The present work reveals that the magnetic FIPT mechanism is promising for magnetic actuation applications and provides new opportunities for applications requiring high actuation work-outputs with relatively large actuation frequencies. One potential issue is the requirement for relatively high critical magnetic fields and field intervals (1.5-3 T) for the onset of FIPT and for reversible FIPT, respectively.

36 MATERIALS SCIENCE↗

Machine-Learning Microstructure for Inverse Material Design

Metallurgy and material design have thousands of years’ history and have played a critical role in the civilization process of humankind. The traditional trial-and-error method has been unprecedentedly challenged in the modern era when the number of components and phases in novel alloys keeps increasing, with high-entropy alloys as the representative. New opportunities emerge for alloy design in the artificial intelligence era. Here a successful machine-learning (ML) method is developed to identify the microstructure images with eye-challenging morphology for a number of martensitic and ferritic steels. Assisted by it, a new neural-network method is proposed for the inverse design of alloys with 20 components, which can accelerate the design process based on microstructure. The method is also readily applied to other material systems given sufficient microstructure images. This work lays the foundation for inverse alloy design based on microstructure images with extremely similar features.

36 MATERIALS SCIENCE↗

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

Abstract Experimental results are presented that serve to lower the barrier for developing the science and technology of non‐classical thermotropic glycolipid mesophases, which now include dodecagonal quasicrystal (DDQC) and Frank–Kasper (FK) A15 and σ mesophases that can be produced under mild conditions from a versatile class of sugar‐polyolefin conjugates. By employing “alloys” comprised of mono‐ and disaccharide‐polyolefin conjugates, and optionally with vitamin E as a small molecule phase modulator, we report the spontaneous formation of stable A15 mesophases at ambient temperature. We further document a rich thermotropic phase map that includes DDQC, A15, and σ mesophases of tunable periodicity that are connected through rapid thermotropic phase transitions as a function of increasing temperature in the order: liquid‐like packing (LLP)→DDQC → A15→σ→ disorder. This first direct observation of a rapid thermotropic A15→σ phase transition provides support for a diffusionless martensitic process proceeding through strain‐induced introduction of planar defects into the A15 lattice.

36 MATERIALS SCIENCE↗

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

Abstract Experimental results are presented that serve to lower the barrier for developing the science and technology of non‐classical thermotropic glycolipid mesophases, which now include dodecagonal quasicrystal (DDQC) and Frank–Kasper (FK) A15 and σ mesophases that can be produced under mild conditions from a versatile class of sugar‐polyolefin conjugates. By employing “alloys” comprised of mono‐ and disaccharide‐polyolefin conjugates, and optionally with vitamin E as a small molecule phase modulator, we report the spontaneous formation of stable A15 mesophases at ambient temperature. We further document a rich thermotropic phase map that includes DDQC, A15, and σ mesophases of tunable periodicity that are connected through rapid thermotropic phase transitions as a function of increasing temperature in the order: liquid‐like packing (LLP)→DDQC → A15→σ→ disorder. This first direct observation of a rapid thermotropic A15→σ phase transition provides support for a diffusionless martensitic process proceeding through strain‐induced introduction of planar defects into the A15 lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Review and construction of interatomic potentials for molecular dynamics studies of hydrogen embrittlement in Fe─C based steels

Abstract Reducing hydrogen embrittlement in the low‐cost Fe─C based steels have the potential to significantly impact the development of hydrogen energy technologies. Molecular dynamics studies of hydrogen interactions with Fe─C steels provide fundamental information about the behavior of hydrogen at microstructural length scales, although such studies have not been performed due to the lack of an Fe─C─H ternary interatomic potential. In this work, the literature on interatomic potentials related to the Fe─C─H systems are reviewed with the aim of constructing an Fe─C─H potential from the published binary potentials. We found that Fe─C, Fe─H, and C─H bond order potentials exist and can be combined to construct an Fe─C─H ternary potential. Therefore, we constructed two such Fe─C─H potentials and demonstrate that these ternary potentials can reasonably capture hydrogen effects on deformation characteristics and deformation mechanisms for a variety of microstructural variations of the Fe─C steels, including martensite that results from γ to α phase transformation, and pearlite that results from the eutectic formation of the Fe 3 C cementite compound.

Zhou, Xiaowang↗

Effect of SO 2 on oxidation of metallic materials in CO 2 /H 2 O-rich gases relevant to oxyfuel environments: Effect of SO 2 on oxidation of metallic materials

In an oxyfuel plant, heat exchanging metallic components will be exposed to a flue gas that contains substantially higher contents of CO2, water vapor, and SO2 than conventionalflue gases. In the present study, the oxidation behavior of the martensitic steel P92 was studied in CO2-and/or H2O-rich gas mixtures with and without addition of SO2. For this purpose, the corrosion of P92 at 550 8C up to 1000 h in Ar–H2O–SO2, Ar–CO2–SO2, Ar–CO2–O2–SO2 and simulated oxyfuel gas (Ar–CO2–H2O–O2–SO2) was compared with the behavior in selected SO2-free gases. The oxidation kinetics were estimated by a number of methods such as optical microscopy, scanning electron microscopy with energy and wave length dispersive X-ray analysis, glow discharge optical emission spectroscopy, X-ray diffraction as well as transmission electron microscopy. The experimental results revealed that the effect of SO2 addition on the materials behavior substantially differed, depending on the prevailing base gas atmosphere. The various types of corrosion attack affected by SO2 could not be explained by solely comparing equilibrium activities of the gas atmospheres with thermodynamic stabilities of possible corrosion products. The results were found to be strongly affected by relative rates of reactions of the various gas species occurring within the frequently porous corrosion scales as well as at the scale/gas-and scale/alloy interfaces.Whereas SO2 addition to Ar–CO2 resulted in formation of an external mixed oxide/sulflde layer, the presence of SO2 in oxyfuel gas and in Ar–H2O–SO2 resulted in Fe-sulflde formation near the interface between inner and outer oxide layer as well as Cr-sulflde formation in the alloy. In the latter gases, the presence of SO2 seemed to have no dramatic effect on oxide scale growth rates.

36 MATERIALS SCIENCE↗

Quantifying adherence of oxide scales on steels exposed to high temperature and pressure steam

Oxide scale exfoliation is a major concern in fossil fuel power generation because it can cause tube blockages and erode valves and steam turbine components downstream. There is still considerable scientific and commercial interest to improve the mechanistic understanding of oxide failures by developing models to predict exfoliation and the extent of tube blockage as a function of operating conditions and component geometries. Tensile testing inside a scanning electron microscope was conducted on ferritic–martensitic and austenitic steel specimens with the steam side (Fe,Cr)-rich oxides grown after exposures for up to 1000 h in steam with ~100 ppb O 2 at 276 bar and 550°C. Multiple oxide layer cracks and delamination events were observed and analyzed in detail during the tests. Results from the testing agreed well with earlier observations that had identified the failure location at the outer–inner oxide layer for all tested materials. Calculated adhesion energies identified the outer–inner oxide interface of alloy 347HFG as the weakest interface.

36 MATERIALS SCIENCE↗

Evaluation of coated steels in supercritical CO 2

The carburizing supercritical CO 2 (sCO 2 ) environment limits the use of lower cost steels in the lower temperature (450–650°C) portions of the sCO 2 Brayton cycle because of concerns about internal carburization and embrittlement. Results on a ferritic–martensitic steel and conventional and advanced austenitic steels at 450–650°C in 30 MPa sCO 2 with and without 1% O 2 and 0.1% H 2 O additions have indicated that sCO 2 environments will have lower maximum operating temperatures compared to steam plants. Pack Al and Cr coatings were evaluated at 650°C on T91 and 316H substrates and showed some benefit for up to 2000 h at 650°C, especially without impurities. However, characterization indicated Al 2 O 3 was not formed and Cr-rich carbides formed in the Cr coatings. With the addition of impurities in the sCO 2 , the coatings were less protective at 650°C. Subsequent exposures at 600°C in sCO 2 showed similar behavior. Postexposure evaluations included measuring the bulk C content and room temperature tensile properties. Finally, improvements were indicated but the tensile results were complicated by the high temperature pack coating process affecting the substrate properties.

36 MATERIALS SCIENCE↗

Multiaxial deformation of polyethylene and polyethylene/clay nanocomposites: In situ synchrotron small angle and wide angle X-ray scattering study

A unique in situ multiaxial deformation device has been designed and built specifically for simultaneous synchrotron small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) measurements. SAXS and WAXS patterns of high-density polyethylene (HDPE) and HDPE/clay nanocomposites were measured in real time during in situ multiaxial deformation at room temperature and at 55 C. It was observed that the morphological evolution of polyethylene is affected by the existence of clay platelets as well as the deformation temperature and strain rate. Martensitic transformation of orthorhombic into monoclinic crystal phases was observed under strain in HDPE, which is delayed and hindered in the presence of clay nanoplatelets. From the SAXS measurements, it was observed that the thickness of the interlamellar amorphous region increased with increasing strain, which is due to elongation of the amorphous chains. The increase in amorphous layer thickness is slightly higher for the nanocomposites compared to the neat polymer.

36 MATERIALS SCIENCE↗