Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The effect of magnetic susceptibility and magnetic field strength on porosity estimates determined from low-field nuclear magnetic resonance

The presence of materials with high magnetic susceptibility are known to have an impact on 1H nuclear magnetic resonance (NMR) measurements and in laboratory data this often results in poor estimates of porosity from NMR data. To quantify and understand the cause of the poor NMR porosity estimations, in this laboratory study, we examine the effect of magnetic susceptibility, NMR measurement parameters, and NMR instrument design on NMR measurements. Data were collected with two instruments, each with a different Larmor frequency (2 MHz and 485 kHz), on water-saturated unconsolidated sediments with magnetic susceptibility values ranging from 3.6 × 10 -6 to 7020 × 10 -6 SI. The results show that for materials with low magnetic susceptibility (<378 × 10 -6 SI), the gravimetric porosity is accurately predicted from the NMR measurements. For the samples with high magnetic susceptibility (>987 × 10 -6 SI) the gravimetric porosity is poorly predicted from the 2 MHz NMR measurements made at all echo times (from 0.2 to 3.0 ms). In contrast, the gravimetric porosity is more accurately predicted at an echo time of 0.2 ms for measurements made using the 485 kHz instrument, although at larger echo times (>1.0 ms), the porosity estimate becomes poor. The 485 kHz NMR instrument has non-zero internal magnetic field gradients, similar to those found in borehole instruments, in contrast to the 2 MHz NMR instrument, which has a homogeneous applied magnetic field. Finally, we conclude that differences is the magnetic field strength and higher magnetic field inhomogeneities in the 485 kHz NMR instrument contribute to a reduction of the impact of inhomogeneities in the magnetic field caused by materials with high magnetic susceptibility, allowing for improved porosity estimation. These results indicate that NMR measurements collected at short echo times in low, inhomogeneous static fields, e.g., borehole instruments, may provide accurate estimates of porosity in water saturated sediments, even in the presence of magnetic minerals.

58 GEOSCIENCES↗

Spin–glass transition in La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.5−x}Al{sub x}O{sub 3−δ} perovskites

Graphical abstract: In-phase and out-of-phase ac susceptibility measurements at the magnetic field 1000 Oe show the shifting of transition temperature with frequency (i.e. spin–glass transition) in La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.3}Al{sub 0.2}O{sub 3−δ}. - Highlights: • Spin–glass transition at low temperature (around 50 K). • Al-doping decreases the antiferromagnetic transition temperature. • Ferromagnetic around room temperature. - Abstract: The structural and magnetic properties of the Al-doped La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.5−x}Al{sub x}O{sub 3−δ} (x = 0.0, 0.1, 0.2, 0.3) were investigated by X-ray powder diffraction, neutron powder diffraction and magnetization measurements. Rietveld refinement of the diffraction data confirms that the compounds crystallize in rhombohedral symmetry (space group, R-3C). Unit cell volume decreases with increasing concentration of Al at the B-site. Upon cooling from room temperature, we have observed multiple magnetic phase transitions, i.e. paramagnetic (PM), ferromagnetic (FM), antiferromagnetic (AFM) and spin–glass (SG), in the samples. A low temperature magnetic hysteresis study demonstrates the presence of ferromagnetic domains for all compositions. The antiferromagnetic transition temperature decreases with the Al-doping AC susceptibility measurements at 97 Hz and 1 Oe show SG behaviors with a spin-freezing temperature close to 50 K for all samples. The in-phase ac susceptibility (χ{sup /}) decreases in magnitude and spin–glass transition (T{sub SG}) increase toward higher temperature with increasing frequency. The spin–glass behavior accompanied by the anomalous magnetic transitions is due to the competing interactions between FM and AFM. The results also shows that a part of the samples lose magnetic order to form a SG state accompanied by an AFM state at low temperature.

36 MATERIALS SCIENCE↗

Loss characterization of Mo-doped FeNi flake for DC-to-DC converter and MHz frequency applications

Magnetic core materials with low loss, high magnetic induction, large permeability, and high working frequencies above 1 MHz are in high demand in the next generation of miniaturized power electronic devices. Magnetic flake based composite materials have been developed to take advantage of high operating frequency ranges, low eddy current losses, high magnetic induction, and low cost fabrication methods. In this study, Mo-doped FeNi flakes with thicknesses of 0.4 +/- 0.2 mu m to 1.6 +/- 0.5 mu m have been successfully fabricated with high energy ball milling. The lateral size of the flake is around 100 mu m. After being hot-pressed with polymers, all of the samples show initial permeability higher than 40 in the frequency range up to 10 MHz and a loss tangent lower than 0.1. At high excitations, the composite materials show core losses 5 times lower than that of Fe flakes at 800 kHz. (C) 2012 American Institute of Physics. [doi:10.1063/1.3677310]

Zhou, Y↗

Magnetic behavioural change of silane exposed graphene nanoflakes

The electronic structures and magnetic properties of graphene nanoflakes (GNFs) exposed to an organo-silane precursor [tetra-methyl-silane, Si(CH{sub 3}){sub 4}] were studied using atomic force microscopy, electron field emission (EFE), x-ray photoelectron spectroscopy (XPS), and magnetization. The result of XPS indicates that silyl radical based strong covalent bonds were formed in GNFs, which induced local structural relaxations and enhanced sp{sup 3} hybridization. The EFE measurements show an increase in the turn-on electric field from 9.8 V/μm for pure GNFs to 26.3 V/μm for GNFs:Si having highest Si/(Si + C) ratio ( ≅ 0.35) that also suggests an enhancement of the non-metallic sp{sup 3} bonding in the GNFs matrix. Magnetic studies show that the saturation magnetization (Ms) is decreased from 172.53 × 10{sup −6} emu/g for pure GNFs to 13.00 × 10{sup −6} emu/g for GNFs:Si with the highest Si/(Si + C) ratio 0.35, but on the other side, the coercivity (Hc) increases from 66 to 149 Oe due to conversion of sp{sup 2} → sp{sup 3}-hybridization along with the formation of SiC and Si-O bonding in GNFs. The decrease in saturation magnetization and increase in coercivity (Hc) in GNFs on Si-functionalization are another routes to tailor the magnetic properties of graphene materials for magnetic device applications.

36 MATERIALS SCIENCE↗

Observation of stacking engineered magnetic phase transitions within moiré supercells of twisted van der Waals magnets

Abstract Recent demonstrations of moiré magnetism, featuring exotic phases with noncollinear spin order in the twisted van der Waals (vdW) magnet chromium triiodide CrI 3 , have highlighted the potential of twist engineering of magnetic (vdW) materials. However, the local magnetic interactions, spin dynamics, and magnetic phase transitions within and across individual moiré supercells remain elusive. Taking advantage of a scanning single-spin magnetometry platform, here we report observation of two distinct magnetic phase transitions with separate critical temperatures within a moiré supercell of small-angle twisted double trilayer CrI 3 . By measuring temperature-dependent spin fluctuations at the coexisting ferromagnetic and antiferromagnetic regions in twisted CrI 3 , we explicitly show that the Curie temperature of the ferromagnetic state is higher than the Néel temperature of the antiferromagnetic one by ~10 K. Our mean-field calculations attribute such a spatial and thermodynamic phase separation to the stacking order modulated interlayer exchange coupling at the twisted interface of moiré superlattices.

36 MATERIALS SCIENCE↗

Use of High Magnetic Fields to Improve Material Properties for Hydraulics, Automotive and Truck Components

In this CRADA, research and development activities were successfully conducted on magnetic processing effects for the purpose of manipulating microstructure and the application specific performance of three alloys provided by Eaton (alloys provided were: carburized steel, plain low carbon steel and medium carbon spring steel). Three specific industrial/commercial application areas were considered where HMFP can be used to provide significant energy savings and improve materials performance include using HMFP to: 1.) Produce higher material strengths enabling higher torque bearing capability for drive shafts and other motor components; 2.) Increase the magnetic response in an iron-based material, thereby improving its magnetic permeability resulting in improved magnetic coupling and power density, and 3.) Improve wear resistance. The very promising results achieved in this endeavor include: 1.) a significant increase in tensile strength and a major reduction in volume percent retained austenite for the carburized alloy, and 2.) a substantial improvement in magnetic perm respect to a no-field processed sample (which also represents a significant improvement over the nominal conventional automotive condition of no heat treatment). The successful completion of these activities has resulted in the current 3-year CRADA No. NFE-09-02522 Prototyping Energy Efficient ThermoMagnetic and Induction Hardening for Heat Treat and Net Shape Forming Applications .

Eaton Innovation Center↗

Multiple temperature-induced magnetization reversals in SmCr{sub 1−x}Fe{sub x}O{sub 3} system

Graphical abstract: - Highlights: • Multiple temperature-induced magnetization reversals were observed in x = 0.1. • Coexistence of normal and inverse magnetocaloric effects was observed. • A reasonable model was proposed to explain the magnetization reversals. - Abstract: The structural and magnetic properties of the SmCr{sub 1−x}Fe{sub x}O{sub 3} (0 ≤ x ≤ 0.5) system have been investigated. Multiple temperature-induced magnetization reversals were observed in x = 0.1. The high-temperature magnetization reversal is due to the special spin structure, in which the net canted moment of the Cr-rich regions and the net moment of the Fe–Cr ordered regions orient in opposite direction; while the low temperature one can be ascribed to the spin reorientation. The sample with x = 0.5 exhibits the highest compensation temperature. Coexistence of normal and inverse magnetocaloric effects was observed in all doped samples. Potential applications in magnetic refrigeration based constant temperature bath near room temperature (∼286 K) have been demonstrated.

36 MATERIALS SCIENCE↗

Anomalous magnetic behavior in nanocomposite materials of reduced graphene oxide-Ni/NiFe{sub 2}O{sub 4}

Magnetic Reduced Graphene Oxide-Nickel/NiFe{sub 2}O{sub 4} (RGO-Ni/NF) nanocomposite has been synthesized by one pot solvothermal method. Respective phase formations and their purities in the composite are confirmed by High Resolution Transmission Electron Microscope and X Ray Diffraction, respectively. For the RGO-Ni/NF composite material finite-size effects lead to the anomalous magnetic behavior, which is corroborated in temperature and field dependent magnetization curves. Here, we are reporting the behavior of higher magnetization values for Zero Field Cooled condition to that of Field Cooled for the RGO-Ni/NF nanocomposite. Also, the observed negative and positive moments in Hysteresis loops at relatively smaller applied fields (100 Oe and 200 Oe) are explained on the basis of surface spin disorder.

36 MATERIALS SCIENCE↗

New magnetic phase of the chiral skyrmion material Cu 2 OSeO 3

The lack of inversion symmetry in the crystal lattice of magnetic materials gives rise to complex noncollinear spin orders through interactions of a relativistic nature, resulting in interesting physical phenomena, such as emergent electromagnetism. Studies of cubic chiral magnets revealed a universal magnetic phase diagram composed of helical spiral, conical spiral, and skyrmion crystal phases. We report a remarkable deviation from this universal behavior. By combining neutron diffraction with magnetization measurements, we observe a new multidomain state in Cu 2 OSeO 3 . Just below the upper critical field at which the conical spiral state disappears, the spiral wave vector rotates away from the magnetic field direction. This transition gives rise to large magnetic fluctuations. Furthermore, we clarify the physical origin of the new state and discuss its multiferroic properties.

36 MATERIALS SCIENCE↗

Mixed rare earth oxides derived from monazite sand as an inexpensive precursor material for room temperature magnetic refrigeration applications

Highlights: • Compound is synthesized using mixed rare earth oxide derived from monazite sand. • Rietveld refinement confirms the compound is a mixture of rare earth manganites and CeO{sub 2}. • The compound exhibits a magnetic entropy change of 3.28 J kg{sup −1} K{sup −1} under 50 kOe magnetic field at 310 K. • The compound exhibit a RCP of 120 J kg{sup −1} and ΔT{sub ad} of 2.11 K at 310 K under 50 kOe field. - Abstract: An inexpensive perovskite type (RE{sub MIX}){sub 0.67}Sr{sub 0.33}MnO{sub 3} compound is synthesized via solid state method using mixed rare earth oxide precursor derived from monazite sand. Rietveld refinement of X-ray powder diffraction patterns confirms the compound is a mixture of rare earth manganites which is the major phase and CeO{sub 2} as the secondary phase. The compound shows a second order ferromagnetic to paramagnetic transition near room temperature and exhibits a magnetic entropy change (-ΔS{sub M}) of 3.28 J kg{sup −1} K{sup −1} with a relative cooling power (RCP) of 120 J kg{sup −1} and an adiabatic temperature change (ΔT{sub ad}) of 2.11 K at 310 K under 50 kOe magnetic field. The Debye temperature of the compound is found to be 543 K and room temperature thermal conductivity is 4.26 W m{sup −1} K{sup −1}. The temperature variation of electrical resistivity shows a metal to insulator transition around 180 K, which gets shifted towards higher temperature upon the application of magnetic field. The compound shows a large value of −ΔS{sub M} and this work makes an endeavor to develop low–cost materials for the magnetic refrigeration applications near the room temperature.

36 MATERIALS SCIENCE↗

Tuning of magnetic parameters in cobalt-polystyrene nanocomposites by reduction cycling

Graphical abstract: Cobalt nanoparticles were prepared by a reduction process inside polymer pores. A porous polymer network (polystyrene) was chosen as the template for the synthesis of elementary cobalt as high surface area cobalt nanoparticles are prone to oxidation. The preliminary studies reveal that the cobalt is first formed with an oxide protective layer outside and upon repeating the reduction cycles, inner pores of the polymers are opened which enhanced the yield of metallic cobalt. These high surface area cobalt nanoparticles embedded in a polymer are ideal for the synthesis of carbon nanotubes as cobalt can act as a catalyst for the nanotube synthesis. The concentration of cobalt can be tuned in this technique by repeating the cycling process. Highlights: {yields} Elementary cobalt nanoparticles were synthesized inside polystyrene by a novel process. {yields} The self protection is achieved by the auto-shelling with the metal oxide. {yields} The magnetisation and coercivity could be tuned by repeating the cycles. {yields} Tuning of magnetic properties (both coercivity and magnetisation) could be achieved by the repetition of reduction cycles. {yields} Synthesized nanocomposite can act as a catalyst for carbon nanotube synthesis. -- Abstract: Cobalt nanoparticles were prepared by a reduction process inside polymer pores using CoSO{sub 4}.7H{sub 2}O and NaBH{sub 4}. A porous polymer network (sulphonated polystyrene) was chosen, as the template for the synthesis of elementary cobalt as high surface area cobalt nanoparticles are prone to oxidation. The preliminary studies reveal that the cobalt is first formed with an oxide protective layer outside and upon repeating the reduction cycles, inner pores of the polymers are opened which enhanced the yield of metallic cobalt. These high surface area cobalt nanoparticles embedded in a polymer are ideal for the synthesis of carbon nanotubes as cobalt can act as a catalyst for the nanotube synthesis. The concentration of cobalt can be tuned in this technique by repeating the cycling process.

36 MATERIALS SCIENCE↗

The magnetic states of a van der Waals ferromagnet CrGeTe 3 probed by vector-field magnetic force microscopy

Here, we present a study on the magnetic domain configuration in the van der Waals ferromagnet CrGeTe 3 using a vector-field cryogenic magnetic force microscopy. Our investigation demonstrates the influence of magnetic fields strength and angle on the magnetic domain configuration, showing the coexistence of striped and spike-like magnetic domains. This study contributes to understanding the impact of uniaxial magnetic anisotropy on the domain configuration of van der Waals ferromagnets, offering insights into stabilizing different domain patterns.

36 MATERIALS SCIENCE↗

Magnetismo Molecular (Molecular Magentism)

The new synthesis processes in chemistry open a new world of research, new and surprising materials never before found in nature can now be synthesized and, as a wonderful result, observed a series of physical phenomena never before imagined. Among these are many new materials the molecular magnets, the subject of this book and magnetic properties that are often reflections of the quantum behavior of these materials. Aside from the wonderful experience of exploring something new, the theoretical models that describe the behavior these magnetic materials are, in most cases, soluble analytically, which allows us to know in detail the physical mechanisms governing these materials. Still, the academic interest in parallel this subject, these materials have a number of properties that are promising to be used in technological devices, such as in computers quantum magnetic recording, magnetocaloric effect, spintronics and many other devices. This volume will journey through the world of molecular magnets, from the structural description of these materials to state of the art research.

36 MATERIALS SCIENCE↗

Charge transport and antiferromagnetic ordering in nitroxide radical crystals

Nonconjugated radical polymers and small molecules are employed as functional materials in organic electronic devices. Furthermore, the unpaired electrons on these materials have permanent magnetic moments, making these materials promising candidates for organic magnets. Through molecular design, strong antiferromagnetic and ferromagnetic ordering have been achieved in conjugated materials. However, the magnetic properties of nonconjugated radical polymers have only shown weak magnetic interactions among the open-shell sites due to the large mean separation between radicals in typical materials. Here, we have designed, synthesized, and crystalized two open-shell molecules that used molecular engineering to control the assembly of the open-shell sites into a strong antiferromagnetically ordered network. The strong antiferromagnetic interaction is evidenced by a high paramagnetic-to-antiferromagnetic transition temperature of ~40 K. This high transition temperature was a result of a high spin exchange coupling constant J of about –20 cm –1 , which was suggested by both experimental and computed coupling parameters given by the energy difference between high-spin and low-spin broken-symmetry structures. In addition, a single-crystal electrical conductivity of ~10 –3 S m –1 was achieved, which indicated the potential of this material in electronic applications. As a result, this work provides an insight into a design strategy for radical-based electronic and magnetic materials through proper molecular structure modifications.

36 MATERIALS SCIENCE↗

Ablation of high-Z material dust grains in edge plasmas of magnetic fusion devices

The model, including shielding effects of high-Z dust grain ablation in tokamak edge plasma, is presented. In a contrast to shielding models developed for pellets ablation in a hot plasma core, this model deals with the dust grain ablation in relatively cold edge plasma. Using some simplifications, a closed set of equations determining the grain ablation rate Γ is derived and analyzed both analytically and numerically. The scaling law for Γ versus grain radius and ambient plasma parameters is obtained and confirmed by the results of numerical solutions. The results obtained are compared with both dust grain models containing no shielding effects and the pellet ablation models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Discovery of an Intrinsic Antiferromagnetic Semiconductor EuSc 2 Te 4 With Magnetism‐Driven Nonlinear Transport

Magnetic topological materials have recently emerged as a promising platform for studying quantum geometry by the nonlinear transport in thin film devices. In this work, an antiferromagnetic (AFM) semiconductor EuSc₂Te₄ as the first bulk crystal that exhibits quantum geometry-driven nonlinear transport is reported. This material crystallizes into an orthorhombic lattice with AFM order below 5.2 K and a bandgap of less than 50 meV. The calculated band structure aligns with the angle-resolved photoemission spectroscopy spectrum. The AFM order preserves combined space-time inversion symmetry but breaks both spatial inversion and time-reversal symmetry, leading to the nonlinear Hall effect (NLHE). Nonlinear Hall voltage measured in bulk crystals appears at zero field, peaks near the spin-flop transition as the field increases, and then diminishes as the spin moments align into a ferromagnetic order. This field dependence, along with the scaling analysis of the nonlinear Hall conductivity, suggests that the NLHE of EuSc₂Te₄ involves contributions from quantum metric, in addition to extrinsic contributions, such as spin scattering and junction effects. Furthermore, this NLHE is found to have the functionality of broadband frequency mixing, indicating its potential applications in electronics. This work reveals a new avenue for studying magnetism-induced nonlinear transport in magnetic materials.

36 MATERIALS SCIENCE↗

Magnetisation studies of phase co-existence in Gd{sub 1-x}Ca{sub x}BaCo{sub 2}O{sub 5.5}

Highlights: Black-Right-Pointing-Pointer The series Gd{sub 1-x}Ca{sub x}BaCo{sub 2}O{sub 5.5} was synthesised by solid state reaction. Black-Right-Pointing-Pointer Magnetisation studies were carried out in the 4-300 K temperature range in magnetic fields upto 16 Tesla. Black-Right-Pointing-Pointer Results were used to formulate the T versus Ca fraction, phase diagram. Black-Right-Pointing-Pointer Evidence for Magnet-electronic phase separation is shown for the first time in the compound. -- Abstract: Magnetic properties of hole doped, oxygen deficient double perovskite compounds, Gd{sub 1-x}Ca{sub x}BaCo{sub 2}O{sub 5.5}, have been investigated. Ferromagnetic transition temperatures increase and the anti-ferromagnetic transition temperatures decrease with Ca substitution leading to stabilisation of ferromagnetisim for x {>=} 0.05. A detailed study of the ferromagnetic phase indicates the presence of double hysterisis loops for Ca fractions, 0.05 {<=} x {<=} 0.2 in the 50-200 K temperature range, suggestive of the co-existence of two ferromagnetic phases with different co-ercivities. Based on the magnetisation and transport measurements a phase diagram is proposed for Ca doped GdBaCo{sub 2}O{sub 5.5}.

36 MATERIALS SCIENCE↗

First-order magnetic phase transition in P r 2 In with negligible thermomagnetic hysteresis

Magnetic first-order phase transitions are key for the emergence of functionalities of fundamental and applied significance, including magnetic shape memory as well as magnetostrictive and magnetocaloric effects. Such transitions are usually associated with thermomagnetic hysteresis. In this paper we report the observation of a firstorder transition in Pr 2 In from a paramagnetic to a ferromagnetic state at $T_C$ = 57K without a detectable thermomagnetic hysteresis, which is also accompanied by a large magnetocaloric effect. The peculiar electronic structure of Pr2In exhibiting a large density of states near the Fermi energy explains the highly responsive magnetic behavior of the material. The magnetic properties of Pr 2 In are reported, including observation of another (second-order) magnetic transition at 35 K.

36 MATERIALS SCIENCE↗