Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNET SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Study of the electronic and magnetic properties of EuAlO{sub 3} using FP-LAPW method

The electronic and magnetic properties of EuAlO{sub 3} is calculated by first-principles full-potential linearized augmented plane wave (FP-LAPW) method based on density functional theory (DFT). Density of states (DOS), magnetic moments and band structures of the systems are presented. For the exchange and correlation energy, local spin density approximation (LSDA+U) with the inclusion of Hubbard potential U is used. Our calculation showed an indirect band gap of the order of 4 eV for EuAlO{sub 3} in the spin down channel of the DOS and band structures supporting HMF nature of the system. The effective magnetic moment of 6.00 µ{sub B} also supported the above conclusion with an integral value. The DOS of Eu were found responsible for the HMF nature of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instrumentation and Control Selection for the 12 GeV Hall-B Magnets at Jefferson Lab

Here, as part of the Jefferson Lab 12 GeV accelerator upgrade, the Experimental Physics Hall B detector system requires two superconducting magnets – a Torus and a Solenoid. The specifications required maximum space for the detectors which led to the choice of conduction cooling for each magnet. The Torus consists of 6 trapezoidal 'race-track'-type coils connected in series with an operating current of 3770 A. The Solenoid is an actively shielded 5 Tesla magnet consisting of 5 coils connected in series operating at 2416 A. Within the hall the two magnets are located in close proximity to each other and are surrounded by particle detectors. We describe the philosophy behind the instrumentation selection and control design that accounts for this proximity and other challenging working conditions. We describe the choice of sensor technologies, as well as the control and data acquisition methods. The magnet power and cryogenic control sub-systems are implemented using Allen Bradley Control Logix 1756-L72 Programmable Logic Controllers. Sensor instrumentation read-backs are routed into the PLC via National Instruments cRIO hardware (Field Programmable Gate Arrays or FPGA/RT application) using Jefferson Lab designed FPGA-based multi-sensor-excitation-chassis. Configuration, monitoring, and alarm handlers for the magnet systems are provided via an Experimental Physics Instrumentation & Control System interface (EPICS). Failure Modes and Effects Analysis (FMEA) and the requirement to monitor critical parameters during operation guided the selection of instrumentation and associated hardware. The design of the quench protection and voltage tap sub-systems was driven by the anticipated level of voltages developed during a magnet quench. The primary hard-wired quench detection and protection sub-system together with the secondary PLC-based protection sub-system is also discussed. The successful commissioning and subsequent performance of these magnets demonstrates the robustness of the design and implementation approach that was adopted by the Jefferson Lab team and serves as an excellent 'How To' guide for future projects of this size and complexity.

12 GeV↗

Analysis of Magnetic Field Emissions and Shield Requirements for Interoperating High-Power EV Wireless Charging System

In this study, the magnetic field emission (MFE) is investigated for matching (identical primary and secondary couplers) and interoperating (different couplers) 11 kW wireless charging systems (WCS). The interoperating charging pads generate higher MFE than the matching charging-pads; hence, using interoperable couplers requires a more effective shielding. In this work, different shield topologies are investigated to suppress the MFE for interoperable conditions. Four 11 kW WCSs with the unipolar (uni) and bipolar (bi) transmitter (Tx) and receiver (Rx) pads has been investigated: 1) uniTx with uniRx, 2) uniTx with biRx, 3) biTx with uniRx, and 4) biTx with bi-Rx. The studied systems are designed for 11 kW WPT3 level with Z2 airgap class (140-150 mm) resembling the standard SAE-J2954. The WCSs are simulated in finite element analysis (FEA) and validated experimentally using a 11 kW biTx-biRx system. The experimental results match with the simulation results with <5% error. The FEA results show that a biTx needs a magnetic shield, and a uniTx needs an aluminum shield to meet the MFE under all interoperability and alignment conditions.

Mohammad, Mostak↗

In-plane magnetization behaviors in the Shastry-Sutherland system TbB{sub 4}: Monte Carlo simulation

The in-plane magnetization behaviors in TbB{sub 4} are theoretically studied using the frustrated classical XY model, including the exchange and biquadratic interactions, and the anisotropy energy. The magnetization curves at various temperatures are simulated, and the magnetic orders are uncovered by the tracking of the spin configurations. In addition, the effects of the in-plane anisotropy and biquadratic interaction on the magnetization curves are investigated in detail. The simulated results suggest that the magnetic anisotropy within the (001) plane owes to the complex interplay between these couplings, and the anisotropy term plays an important role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic simulations underestimate the effects of waves during magnetic reconnection

Collisionless plasma systems are often studied using fully kinetic simulations, where protons and electrons are treated as particles. Due to their computational expense, it is necessary to reduce the ion-to-electron mass ratio $m_i/m_e$ or the ratio between plasma and cyclotron frequencies in simulations of large systems. In this Letter we show that when electron-scale waves are present in larger-scale systems, numerical parameters affect their amplitudes and effects on the larger system. Using lower-hybrid drift waves during magnetic reconnection as an example, we find that the ratio between the wave electric field and the reconnection electric field scales as $\sqrt{m_i/m_e}$, while the phase relationship is also affected. The combination of these effects means that the anomalous drag that contributes to momentum balance in the reconnection region can be underestimated by an order of magnitude. The results are relevant to the coupling of electron-scale waves to ion-scale reconnection regions, and other systems such as collisionless shocks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal Field Effects on Magnetic Properties of a Mixed Ferrimagnetic Ising System: a Monte Carlo Study

The effects of two different single-ion anisotropies on the magnetization of the mixed (7/2, 5/2) Ising ferrimagnetic system on a square lattice are investigated by the use of Monte Carlo simulation. The ground-state phase diagram is obtained. Compensation points are detected for certain values of the crystal fields. Different types of magnetization curves are available.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Skyrmions and hopfions in three-dimensional frustrated magnets

Here, a model of an inversion-symmetric frustrated spin system is introduced which hosts three-dimensional extensions of magnetic skyrmions. In the continuum approximation, this model reduces to a nonlinear sigma model on a squashed sphere that has a natural interpolating parameter. At one limit of the parameter, the model reduces to a frustrated magnetic system earlier considered by Sutcliffe as a host to hopfions, and in the other limit, it becomes very similar to the 3D Skyrme model. To better understand the relation between hopfions and 3D skyrmions, a model interpolating between the Faddeev-Niemi and the Skyrme models is reconsidered and it is shown that energies of the solitons obey a linear Bogomol'nyi-Prasad-Sommerfeld bound. The 3D skyrmions in the frustrated magnetic model are found and compared to the rational map ansatz.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A 50-kW Three-Phase Wireless Power Transfer System Using Bipolar Windings and Series Resonant Networks for Rotating Magnetic Fields

The mass and volume of wireless power transfer (WPT) systems for charging electric vehicles are directly related to the rated power of the system. The difficulties of high-power wireless charging are exacerbated by the need to meet the same practical constraints associated with vehicle integration as lower power systems. Therefore, more advanced techniques are necessary to improve power density and specific power of wireless charging systems for high-power applications. This article presents theory and analysis of three-phase inductive WPT systems with bipolar phase windings. Magnetic coupler topologies and the theoretical and practical aspects of series three-phase resonant compensation networks are discussed. The systems under consideration are designed to utilize rotating magnetic fields to achieve a power transfer characteristic that is temporally smoother than single-phase systems. Other benefits associated with rotating magnetic field based WPT, including reduced ferrite mass, filter component requirements, and electromagnetic field emissions, are discussed. Experimental results of a prototype system are presented in both aligned and misaligned configurations. The system is demonstrated transferring 50 kW with 95% dc-to-dc efficiency over a 150-mm airgap in the aligned case. On a per-pad basis, the magnetic couplers achieve a power density of 195 kW/m 2 and a specific power of 3.65 kW/kg. Finally this article is accompanied by a video of the rotating magnetic field produced by a simulated three-phase WPT system.

42 ENGINEERING↗

Low-Field Alignment of Anisotropic Bonded Magnets for Additive Manufacturing of Permanent Magnet Motors

Additive manufacturing techniques for fabricating bonded magnets have the potential to reduce manufacturing cost and time-to-market of products and address the criticality of rare-earth elements (REEs), which is a concern for economic design of dependent applications such as permanent magnet machines. We investigated the magnetic alignment of anisotropic bonded magnet material comprising 65 vol.% Nd-Fe-B in nylon-12 produced by extrusion in a 20-W brushless direct current surface permanent magnet motor for submersible water pump application using finite element analysis. The results predict that sufficient alignment for this application could be obtained at low alignment fields (μoH ≤ 1 T) with a reduction in the volume of critical materials by up to 40% compared with isotropic permanent magnets. Furthermore, this demonstrates the economic feasibility of incorporating a magnetic alignment field source into additive manufacturing systems for bonded magnets, and the potential of aligned anisotropic bonded magnets to address REE criticality.

36 MATERIALS SCIENCE↗

Particle-in-cell simulation study of the scaling of asymmetric magnetic reconnection with in-plane flow shear

We investigate magnetic reconnection in systems simultaneously containing asymmetric (anti-parallel) magnetic fields, asymmetric plasma densities and temperatures, and arbitrary in-plane bulk flow of plasma in the upstream regions. Such configurations are common in the high-latitudes of Earth's magnetopause and in tokamaks. We investigate the convection speed of the X-line, the scaling of the reconnection rate, and the condition for which the flow suppresses reconnection as a function of upstream flow speeds. We use two-dimensional particle-in-cell simulations to capture the mixing of plasma in the outflow regions better than is possible in fluid modeling. We perform simulations with asymmetric magnetic fields, simulations with asymmetric densities, and simulations with magnetopause-like parameters where both are asymmetric. For flow speeds below the predicted cutoff velocity, we find good scaling agreement with the theory presented in Doss et al. [J. Geophys. Res. 120, 7748 (2015)]. Applications to planetary magnetospheres, tokamaks, and the solar wind are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A robust and stable PLC based control system for 40kJ/25kV EMM system

This paper describes the PLC based control system developed for a 40kJ/25kV Electro-magnetic machining (EMM) system. In EMM system large capacitor banks is charged with high voltage to store large energy and the banks is made to discharge into a coil within few milli-seconds using a triggered spark gaps. During discharge of the capacitor large surges and transients are generated in the system. The control system monitors/controls and interlocks all the units of the system for proper operation. The control system is the only subsystem which is electrically connected to all the low and high voltage subsystems. Care should be taken at the signal interfacing with the control system to protect the control system. (author)

43 PARTICLE ACCELERATORS↗

Phase transformations and magnetotransport properties of the Pr{sub 0.5}Sr{sub 0.5}Co{sub 1-x}Mn{sub x}O{sub 3} system

The structural, magnetic, and magnetotransport properties of Pr{sub 0.5}Sr{sub 0.5}Co{sub 1-x}Mn{sub x}O{sub 3} (x < 0.65) perovskites are studied by magnetization and electrical conductivity measurements in magnetic fields up to 14 T and by neutron diffraction. In the manganese concentration range x < 0.5 and T = 300 K, the crystal structure is described by monoclinic space group I2/a; at x > 0.5, it is described by orthorhombic space group Imma. When the temperature decreases, a structural transformation without changing the symmetry takes place in all compounds. This transformation is caused by an active role of the inner shells of the praseodymium ion in chemical bond formation. The substitution of manganese for cobalt breaks a long-range ferromagnetic order near x Almost-Equal-To 0.25, and a metal-dielectric transition occurs at x Almost-Equal-To 0.15. The negative magnetoresistance is found to be maximal near a critical manganese concentration, where a long-range magnetic order is broken; it reaches 95% in a field of 14 T at T = 10 K for x = 0.2. An unusual dielectric magnetic state with a small spontaneous magnetic moment and a sharp transition into a paramagnetic state at T > 200 K is revealed in the concentration range 0.30 {<=} x {<=} 0.65 in spite of the absence of coherent magnetic neutron scattering. A model is proposed to explain the behavior of the magnetic properties in this phase.

36 MATERIALS SCIENCE↗

Flexible transformer system

A system includes conductive windings extending around a magnetic core and impedance-varying windings extending around the magnetic core. The impedance-varying windings include positive windings and negative windings. The conductive windings and the impedance-varying windings conduct electric current around the magnetic core. The system includes a first impedance tap changer that is electrically coupled with the positive windings of the impedance-varying windings and a second impedance tap changer electrically coupled with the negative windings of the impedance-varying windings. A controller controls the first impedance tap changer and the second impedance tap changer to change an impedance of the system by changing which portion of the positive windings and which portion of the negative windings are conductively coupled with the conductive windings, and which portion of the positive windings and which portion of the negative windings are disconnected from the conductive windings.

Ndiaye, Ibrahima↗

Magnetization-induced shape transformations in flexible ferromagnetic rings

Flexible ferromagnetic rings are spin-chain magnets, in which the magnetic and mechanical subsystems are coupled. The coupling is achieved through the tangentially oriented anisotropy axis. The possibility to operate the mechanics of the nanomagnets by controlling their magnetization is an important issue for the nanorobotics applications. A minimal model for the deformable curved anisotropic Heisenberg ferromagnetic wire is proposed. An equilibrium phase diagram is constructed for the closed loop geometry: (i) A vortex state with vanishing total magnetic moment is typical for relatively large systems; in this case, the wire has the form of a regular circle. (ii) A topologically trivial onion state with the planar magnetization distribution is realized in small enough systems; magnetic loop is elliptically deformed. By varying geometrical and elastic parameters, a phase transition between the vortex and onion states takes place. The detailed analytical description of the phase diagram is well confirmed by numerical simulations.

36 MATERIALS SCIENCE↗

Disentangling spin-orbit coupling and local magnetism in a quasi-two-dimensional electron system

Quantum interference between time-reversed electron paths in two dimensions (2D) leads to the well-known weak localization correction to resistance. If spin-orbit coupling is present, the resistance correction is negative, termed weak antilocalization (WAL). Here, we report the observation of WAL coexisting with exchange coupling between itinerant electrons and localized magnetic moments. We use low-temperature magnetotransport measurements to investigate the quasi-two-dimensional, high-electron-density interface formed between SrTiO 3 and the antiferromagnetic Mott insulator NdTiO 3 . As the magnetic field angle is gradually tilted away from the sample normal, the data reveal the interplay between strong k-cubic Rashba-type spin-orbit coupling and a substantial magnetic exchange interaction from local magnetic regions. The resulting quantum corrections to the conduction are in excellent agreement with existing models and allow sensitive determination of the small magnetic moments (22 μ B on average), their magnetic anisotropy, and mutual coupling strength. Furthermore, this effect is expected to arise in other 2D magnetic materials systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights on the Effects of Magnetic Forces on the Efficiency of Vibration Energy Harvesting Absorbers in Controlling Dynamical Systems

This study investigates the effects of magnetic constraints on a piezoelectric energy harvesting absorber while simultaneously controlling a primary structure and harnessing energy. An accurate forcing representation of the magnetic force is investigated and developed. A reduced-order model is derived using the Euler–Lagrange principle, and the impact of the magnetic force is evaluated on the absorber’s static position and coupled natural frequency of the energy harvesting absorber and the coupled primary absorber system. The results show that attractive magnet configurations cannot improve the system substantially before pull-in occurs. A rigorous eigenvalue problem analysis is performed on the absorber’s substrate thickness and tip mass to effectively design an energy harvesting absorber for multiple initial gap sizes for the repulsive configurations. Then, the effects of the forcing amplitude on the primary structure absorber are studied and characterized by determining an effective design of the system for a simultaneous reduction in the primary structure’s motion and improvement in the harvester’s efficiency.

42 ENGINEERING↗

Magnetic field falling particle solar receiver systems and methods

Systems and methods that increase the residence time of particles falling through a solar receiver using an induced magnetic field to suspend or slow down and/or alter the flight path of the particles falling through the concentrated beam of sunlight are disclosed.

14 SOLAR ENERGY↗

Lie algebraic approach of a charged particle in presence of a constant magnetic field via the quadratic invariant

In this paper we consider the problem of a charged harmonic oscillator under the influence of a constant magnetic field. The system is assumed to be isotropic and the magnetic field is applied along the z-axis. The canonical transformation is invoked to remove the interaction term and the system is reduced to a model containing the second harmonic generation. Two classes of the real and complex quadratic invariants (constants of motion) are obtained. We have employed the Lie algebraic technique to find the most general solution for the wave function for both real and complex invariants. Some discussions related to the advantage of using the quadratic invariants to solve the Cauchy problem instead of the direct use of the Hamiltonian itself are also given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗