Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Occurrence of gas hydrate in Oligocene Frio sand: Alaminos Canyon Block 818: Northern Gulf of Mexico

A unique set of high-quality downhole shallow subsurface well log data combined with industry standard 3D seismic data from the Alaminos Canyon area has enabled the first detailed description of a concentrated gas hydrate accumulation within sand in the Gulf of Mexico. The gas hydrate occurs within very fine grained, immature volcaniclastic sands of the Oligocene Frio sand. Analysis of well data acquired from the Alaminos Canyon Block 818 No.1 ('Tigershark') well shows a total gas hydrate occurrence 13 m thick, with inferred gas hydrate saturation as high as 80% of sediment pore space. Average porosity in the reservoir is estimated from log data at approximately 42%. Permeability in the absence of gas hydrates, as revealed from the analysis of core samples retrieved from the well, ranges from 600 to 1500 millidarcies. The 3-D seismic data reveals a strong reflector consistent with significant increase in acoustic velocities that correlates with the top of the gas-hydrate-bearing sand. This reflector extends across an area of approximately 0.8 km{sup 2} and delineates the minimal probable extent of the gas hydrate accumulation. The base of the inferred gas-hydrate zone also correlates well with a very strong seismic reflector that indicates transition into units of significantly reduced acoustic velocity. Seismic inversion analyses indicate uniformly high gas-hydrate saturations throughout the region where the Frio sand exists within the gas hydrate stability zone. Numerical modeling of the potential production of natural gas from the interpreted accumulation indicates serious challenges for depressurization-based production in settings with strong potential pressure support from extensive underlying aquifers.

54 ENVIRONMENTAL SCIENCES↗

Numerical simulations of depressurization-induced gas production from gas hydrate reservoirs at the Walker Ridge 312 site, northern Gulf of Mexico

In 2009, the Gulf of Mexico (GOM) Gas Hydrates Joint-Industry-Project (JIP) Leg II drilling program confirmed that gas hydrate occurs at high saturations within reservoir-quality sands in the GOM. A comprehensive logging-while-drilling dataset was collected from seven wells at three sites, including two wells at the Walker Ridge 313 site. By constraining the saturations and thicknesses of hydrate-bearing sands using logging-while-drilling data, two-dimensional (2D), cylindrical, r-z and three-dimensional (3D) reservoir models were simulated. The gas hydrate occurrences inferred from seismic analysis are used to delineate the areal extent of the 3D reservoir models. Numerical simulations of gas production from the Walker Ridge reservoirs were conducted using the depressurization method at a constant bottomhole pressure. Results of these simulations indicate that these hydrate deposits are readily produced, owing to high intrinsic reservoir-quality and their proximity to the base of hydrate stability. The elevated in situ reservoir temperatures contribute to high (5–40 MMscf/day) predicted production rates. The production rates obtained from the 2D and 3D models are in close agreement. To evaluate the effect of spatial dimensions, the 2D reservoir domains were simulated at two outer radii. The results showed increased potential for formation of secondary hydrate and appearance of lag time for production rates as reservoir size increases. Similar phenomena were observed in the 3D reservoir models. The results also suggest that interbedded gas hydrate accumulations might be preferable targets for gas production in comparison with massive deposits. Hydrate in such accumulations can be readily dissociated due to heat supply from surrounding hydrate-free zones. Special cases were considered to evaluate the effect of overburden and underburden permeability on production. The obtained data show that production can be significantly degraded in comparison with a case using impermeable boundaries. The main reason for the reduced productivity is water influx from the surrounding strata; a secondary cause is gas escape into the overburden. The results dictate that in order to reliably estimate production potential, permeability of the surroundings has to be included in a model.

2D and 3D reservoir simulations↗

Gas hydrate reservoirs and gas migration mechanisms in the Terrebonne Basin, Gulf of Mexico

Here, the interactions of microbial methane generation in fine-grained clay-rich sediments, methane migration, and gas hydrate accumulation in coarse-grained, sand-rich sediments are not yet fully understood. The Terrebonne Basin in the northern Gulf of Mexico provides an ideal setting to investigate the migration of methane resulting in the formation of hydrate in thin sand units interbedded with fractured muds. Using 3D seismic and well log data, we have identified several previously unidentified hydrate bearing units in the Terrebonne Basin. Two units are >100 m- thick fine-grained clay-rich units where gas hydrate occurs in near-vertical fractures. In some locations, these fine-grained units lack fracture features, and they contain 1-4-m thick hydrate bearing-sands. In addition, several other thin sand units were identified that contain gas hydrate, including one sand that was intersected by a well at the location of a discontinuous bottom-simulating reflector. Using correlation of well log data to seismic data, we have mapped and described these new units in detail across the extent of the available data, allowing us to determine the variation of seismic amplitudes and investigate the distribution of free gas and/or hydrate. We present several potential source-reservoir scenarios between the thick fractured mud units and thin hydrate bearing sands. We observe that hydrate preferentially forms within thin sand layers rather than fractures when sands are present in larger marine mud units. Based on regional mapping showing the patchy lateral extent of the thin sand layers, we propose that diffusive methane migration or short-migration of microbially generated methane from the marine mud units led to the formation of hydrate in these thin sands, as discontinuous sands would not be conducive to long-range migration of methane from deeper reservoirs.

03 NATURAL GAS↗

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Numerical Simulation of Reservoir Response to Depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths less than 300m and sub-sea depths of 2400m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-interbedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals,” that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth: models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Boswell, Ray↗

A quaternary lead based perovskite structured materials with diffuse phase transition behavior

Graphical abstract: (a) Curie-Weiss plot for the inverse of the relative dielectric permittivity and (b) log (1/{epsilon} - 1/{epsilon}{sub m}) as function of log (T - T{sub m}) for ceramics at 1 kHz. Highlights: Black-Right-Pointing-Pointer Retaining phase pure structure with quaternary complex stoichiometric compositions. Black-Right-Pointing-Pointer P-E loops with good saturation polarization (P{sub s} {approx} 30.7 {mu}C/cm{sup 2}). Black-Right-Pointing-Pointer Diffused relaxor phase transition behavior with {gamma} estimated is {approx}1.65. -- Abstract: A lead based quaternary compound composed of 0.25(PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) + 0.25(PbFe{sub 0.5}Ta{sub 0.5}O{sub 3}) + 0.25 (PbF{sub 0.67}W{sub 0.33}O{sub 3}) + 0.25(PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}) - (PZT-PFT-PFW-PFN) was synthesized by conventional solid-state reaction techniques. It showed moderate high dielectric constant, low dielectric loss, and two diffuse phase transitions, one below the room temperature {approx}261 K and other above {approx}410 K. X-ray diffraction (XRD) patterns revealed a tetragonal crystal structure at room temperature where as scanning electron micrograph (SEM) indicates inhomogeneous surface with an average grain size of 500 nm-3 {mu}m. Well saturated ferroelectric hysteresis loops with good saturation polarization (spontaneous polarization, P{sub s} {approx} 30.68 {mu}C/cm{sup 2}) were observed. Temperature-dependent ac conductivity displayed low conductivity with kink in spectra near the phase transition. In continuing search for developing new ferroelectric materials, in the present study we report stoichiometric compositions of complex perovskite ceramic materials: (PZT-PFT-PFW-PFN) with diffuse phase transition behavior. The crystal structure, dielectric properties, and ferroelectric properties were characterized by XRD, SEM, dielectric spectroscopy, and polarization. 1/{epsilon} versus (T) plots revealed diffuse relaxor phase transition (DPT) behavior. The compositional variation on the phase transition temperature, dielectric constant, and ferroelectric to paraelectric phase transitions are discussed.

36 MATERIALS SCIENCE↗

Shock compression of additively manufactured high solids loaded polymer composites with aligned porosity

The effects of aligned porosity on the shock-compression response of additively manufactured (AM) composite structures with collinear and log-cabin geometries are investigated. The composites contain two inorganic and two organic particle populations and a UV-curable polymer binder. X-ray phase contrast imaging (X-PCI) is used as an in-material diagnostic in plate-impact experiments performed at the Dynamic Compression Sector of the Advanced Photon Source at the Argonne National Laboratory. Macroscale shock and particle velocities and microscale pore collapse velocities are measured from X-PCI images obtained from samples impacted in various orientations relative to the AM build directions. The linear shock and particle velocity relation for the structures with collinear build geometry shows directional differences, with the build direction exhibiting the highest slope and the filament print direction having the shallowest slope. Composites with log-cabin geometry, due to their slightly lower porosity and smaller sized pores, show higher shock velocities than the collinear structures at the same particle velocity. Microscale directionality effects are also observed, with the pore collapse velocity dependent on the pore configuration. Specifically, the pore collapse velocity is highest for pores elongated along the impact direction which is the case for the colinear structures impacted in the filament print direction, which is consistent with the directionality trend observed in the data for the shock and particle velocity equation of state. The pore collapse velocity approaches ∼80 % of the shock velocity and is several times the average bulk particle velocity, suggesting a highly hydrodynamic mechanism of pore collapse. Overall, both the macroscale response as measured by the shock and particle velocity relationship, and the microscale response as measured by the pore collapse velocity, are found to be anisotropic and dependent on the AM composite structure.

Wagner, K. B. [Georgia Institute of Technology, At↗

Effect of ionic liquid properties on lipase stabilization under microwave irradiation

Ionic liquids (ILs) as neoteric solvents and microwave irradiation as alternative energy source are becoming two important tools for many enzymatic reactions. However, it is not well understood what properties of ILs govern the enzyme stabilization, and whether the microwave irradiation could activate enzymes in ILs. To tackle these two important issues, the synthetic activities of immobilized Candida antarctica lipase B (Novozyme 435) were examined in more than twenty ILs through microwave heating. Under microwave irradiation, enhanced enzyme activities were observed when the enzyme was surrounded by a layer of water molecules. However, such enhancement diminished when the reaction system was dried. To understand the effect of IL properties, the enzyme activities under microwave irradiation were correlated with the viscosity, polarity and hydrophobicity (log P) of ILs, respectively. The initial reaction rates bear no direct relationship with the viscosity and polarity (in terms of dielectric constant and EN T ) of ILs, but have a loose correlation (a bell curve) with log P values. The enzyme stabilization by ILs was explained from aspects of hydrogen-bond basicity of anions, dissolution of the enzyme, ionic association strength of anions, and substrate ground-state stabilization by ILs.

Zhao, Hua↗

Nuclear Data Sheets for A=164

Experimental nuclear structure data for the known A=164 isobaric nuclides (Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Re, Os, Ir) have been evaluated, and presented together with Adopted properties of level energies, and associated γ rays. The decay data for these nuclides have also been evaluated, providing Adopted values of γ and β radiations, and log ft values. No excited states are known in 164 Eu, 164 Tb, and 164 Ir. Information for 164 Gd, 164 Re and 164 Os is limited due to insufficient experimental data. For radioactive nuclides, decay schemes of 164 Sm, 164 Gd and 164 Re are not known, and those of 164 W, 164 Tb, 164 Lu, 164 Hf, 164 Ta and 164 W are incomplete. The decay schemes of 164 Ho and the two activities of 164 Tm seem fairly complete. The decay scheme of 164 Yb presents a major problem that the Q(ε) value of 887 keV 29 recommended in 2017Wa10 is in disagreement with the population of levels at 928, 952 and 1060 keV in the daughter nucleus. This decay scheme, which so far has been mainly reported in a secondary reference (1982AdZZ) needs further investigation. Also the masses of 164 Yb and 164 Tm need either new measurements or a re-evaluation to resolve discrepancy of about 220 keV in the Q value of 164 Yb decay to 164 Tm. The reactions and decays for which no new experimental information has become available since the 2001 update have undergone revisions to incorporate conversion coefficients from BrIcc code, and evaluated Q values from 2017Wa10, but the essential content of such datasets may have remained the same as in previous evaluations. Finally, in this respect the present work greatly benefited from all the previous NDS evaluations (2001Si27,1992Sh07, 1986Sh03,1974Bu30), but at the same time data presented herein supersede all the previous published evaluations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Nuclear Data Sheets for A=73☆

Experimental nuclear structure data for the known A=73 isobaric nuclides (Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Kr, Rb and Sr) have been evaluated, and presented together with Adopted properties of level energies, and associated γ rays. The decay data for these nuclides have also been evaluated, providing Adopted values of γ and β radiations, and log ft values. For {sup 73}Mn, only the isotopic identification has been established, with no knowledge of its g.s. half-life. For {sup 73}Fe, {sup 73}Co and {sup 73}Sr, only the ground states and their half-lives are known with no information about the excited states. For {sup 73}Ni, {sup 73}Cu, {sup 73}Zn and {sup 73}Rb, little data are available for excited states. The half-life and decay modes of possibly proton-unbound {sup 73}Rb need firmly established. {sup 73}Ga structure presents a special challenge in that the 1/2{sup −} ground state and the first 3/2{sup −} state have recently been proposed, in a Coulomb excitation experiment by 2010Di14, to form an almost degenerate doublet with an estimated spacing of 229 Th with its first excited state at 7.8 eV, and {sup 235}U with its first excited state at 76 eV. Ultra-high resolution gamma-ray spectroscopic studies are warranted to search for the low-lying (73 Ga, and to determine its half-life. Level structures of {sup 73}Ga, {sup 73}Ge, {sup 73}As, {sup 73}Se, {sup 73}Br and {sup 73}Kr are quite well known, although decay schemes of radioactive ground states of {sup 73}Co, {sup 73}Cu and {sup 73}Br are considered incomplete. The reactions and decays for which no new experimental information has become available since the 2003 update have undergone revisions to incorporate conversion coefficients from BrIcc code, and evaluated Q values from 2017Wa10, but essential content of such datasets may have remained the same as in previous evaluations. In this respect the present work greatly benefited from all the previous NDS evaluations (2004Si08,1993Ki25,1987Ki13, 1980Ek01,1974Al33), but at the same time data presented herein supersede all the previous published evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total kinetic energy release in the fast neutron induced fission of 235 U

The total kinetic energy (TKE) release in the fast neutron induced fission of 235 U was measured for neutron energies E$_n$ = 2 - 100 MeV. The TKE distributions are Gaussian in shape. The mean post neutron emission TKE release decreases non-linearly with increasing neutron energy and can be represented as TKE(MeV) = 170.92-3.73774log 10 E n -0.65028(log 10 E n ) 2 . Abrupt changes in the variances of the TKE distributions are observed at the onset of 2nd, 3rd, etc. chance fission. For E n = 20-100 MeV, the variances are approximately constant. These observations are compared to the predictions of the GEF model for neutron-induced fission. This model describes many of the features of the TKE release adequately.

235U(n,f)↗

Application of predictive data analytics to model daily hydrocarbon production using petrophysical, geomechanical, fiber-optic, completions, and surface data: A case study from the Marcellus Shale, North America

Predicting gas production from stimulated unconventional reservoirs has always been a challenge to oil and gas companies because the physics of fluid flow through such reservoirs is not well understood. On the other hand, modeling gas production from shale reservoirs is a complex multi-variate problem that requires proper integration of data from multiple disciplines, such as geology, petrophysics, geomechanics, completions, and surface-based measurements, etc. Here this study demonstrates the application of data-driven machine learning algorithms, integrating geoscientific, distributed acoustic sensing (DAS), distributed temperature sensing (DTS) fiber-optic, completions, flow scanner production log, and surface data to model daily gas production from a 28-stage stimulated horizontal well drilled in the Marcellus Shale of the Appalachian basin in North America. In addition, this study aims to utilize the data from a fiber-optic monitoring system, such as DAS and DTS to evaluate the well performance. We build supervised data-driven machine learning models using Random Forest (RF), Artificial Neural Network (ANN), and Support Vector Machine (SVM) algorithms to understand the well performance and forecast the daily gas production. The study compares the forecasted results, tests the level of accuracy, and addresses different issues with these machine learning algorithms. A spatio-temporal database is constructed and used to perform sensitivity analyses to identify the key drivers for gas production. The results show that RF and ANN algorithms can be used to predict daily gas production with significantly high accuracy; however, RF algorithm is the best predictor in terms of highest accuracy (96%), less computational time and cost. Based on sensitivity analysis, it appears that Poisson's ratio, minimum horizontal stress, DAS, casing pressure, gamma log are the most important parameters to predict gas production.

02 PETROLEUM↗

Theoretical power-law relationship between permeability and formation factor

Permeability k and formation factor F are important petrophysical properties that have broad applications to reservoir engineering. Although well-log analysis has advanced reservoir characterizations, direct measurement of k is still not available. Accordingly, resistivity logs and more particularly formation factor have been frequently used to estimate k. In this study, we present a theoretical framework to relate k to F. We use power-law scaling from continuum percolation theory to develop a theoretic relationship between k and F, which is similar in form to a published power-law equation with empirical coefficients. Our result gives a physical interpretation to this empirical relationship. We also compare power-law scaling laws from percolation theory with data derived from experimental measurements and numerical simulations in the literature. Finally, using the Curve Fitting toolbox of MATLAB, the parameters of the power-law equations are determined, and the significance of the non-universal power laws are discussed.

42 ENGINEERING↗

Measurement of groomed jet substructure observables in p+p collisions at $\sqrt{s} =$ 200 GeV with STAR

In this letter, measurements of the shared momentum fraction ( z g ) and the groomed jet radius ( R g ), as defined in the SoftDrop algorithm, are reported in p+p collisions at s = 200 GeV collected by the STAR experiment. These substructure observables are differentially measured for jets of varying resolution parameters from R = 0.2 – 0.6 in the transverse momentum range 15 < p T , jet < 60 GeV/ c . These studies show that, in the p T , jet range accessible at s = 200 GeV and with increasing jet resolution parameter and jet transverse momentum, the z g distribution asymptotically converges to the DGLAP splitting kernel for a quark radiating a gluon. The groomed jet radius measurements reflect a momentum-dependent narrowing of the jet structure for jets of a given resolution parameter, i.e., the larger the p T , jet , the narrower the first splitting. For the first time, these fully corrected measurements are compared to Monte Carlo generators with leading order QCD matrix elements and leading log in the parton shower, and to state-of-the-art theoretical calculations at next-to-leading-log accuracy. We observe that PYTHIA 6 with parameters tuned to reproduce RHIC measurements is able to quantitatively describe data, whereas PYTHIA 8 and HERWIG 7, tuned to reproduce LHC data, are unable to provide a simultaneous description of both z g and R g , resulting in opportunities for fine parameter tuning of these models for p+p collisions at RHIC energies. We also find that the theoretical calculations without non-perturbative corrections are able to qualitatively describe the trend in data for jets of large resolution parameters at high p T , jet , but fail at small jet resolution parameters and low jet transverse momenta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rheological behavior and fiber spinning of polyacrylonitrile (PAN)/Carbon nanotube (CNT) dispersions at high CNT loading

Rheological studies play an important role in polymer processing including fiber spinning. In the current work, rheological behavior has been studied for polyacrylonitrile (PAN)/carbon nanotube (CNT) dispersions in dimethyl formamide (DMF), where CNT loading is as high as 15 wt% of the total solids (polymer + CNT). The presence of CNTs increased the elastic-like and shear thinning behavior of the dispersions. The terminal slope of the log G' versus log G" curve, which was used to characterize the homogeneity of solution or dispersion, is dependent on the CNT concentration but independent of temperature between 0 and 60 °C. PAN/CNT-10 (90 wt% PAN +10 wt% CNT) and PAN/CNT-15 were gel spun at different conditions, with small diameter capillary at high shear rate and large diameter capillary at relatively low shear rate. Additionally, for PAN/CNT-10, fiber spinning with lower molecular weight polymer showed increased continuous jetting time when compared to spinning with higher molecular weight polymer. In addition, the rheological behavior of PAN/cellulose nanocrystal (CNC) dispersion with 20–60 wt% CNC was also compared to that of the PAN/CNT dispersions. PAN/CNC and PAN/CNT share similarities in both rheological behavior and fiber spinning at high filler loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloid-facilitated transport of 238 Pu, 233 U and 137 Cs through fractured chalk: Laboratory experiments, modelling, and implications for nuclear waste disposal

The influence of montmorillonite colloids on the mobility of 238 Pu, 233 U and 137 Cs through a chalk fracture was investigated to assess the transport potential for radioactive waste. Radioisotopes of each element, along with the conservative tracer tritium, were injected in the presence and absence of montmorillonite colloids into a naturally fractured chalk core. In parallel, batch experiments were conducted to obtain experimental sorption coefficients (K d , mL/g) for both montmorillonite colloids and the chalk fracture material. Breakthrough curves were modelled to determine diffusivity and sorption of each radionuclide to the chalk and the colloids under advective conditions. Uranium sorbed sparingly to chalk (log K d = 0.7 ± 0.2) in batch sorption experiments. 233 U(VI) breakthrough was controlled primarily by the matrix diffusion and sorption to chalk (15 and 25% recovery with and without colloids, respectively). Cesium, in contrast, sorbed strongly to both the montmorillonite colloids and chalk (batch log K d = 3.2 ± 0.01 and 3.9 ± 0.01, respectively). The high affinity to chalk and low colloid concentrations overwhelmed any colloidal Cs transport, resulting in very low 137 Cs breakthrough (1.1–5.5% mass recovery). Batch and fracture transport results, and the associated modelling revealed that Pu migrates both as Pu (IV) sorbed to montmorillonite colloids and as dissolved Pu(V) (7% recovery). Transport experiments revealed differences in Pu(IV) and Pu(V) transport behavior that could not be quantified in simple batch experiments but are critical to effectively predict transport behavior of redox-sensitive radionuclides. Finally, a brackish groundwater solution was injected after completion of the fracture flow experiments and resulted in remobilization and recovery of 2.2% of the total sorbed radionuclides which remained in the core from previous experiments. In general, our study demonstrates consistency in sorption behavior between batch and advective fracture transport. Finally, the results suggest that colloid-facilitated radionuclide transport will enhance radionuclide migration in fractured chalk for those radionuclides with exceedingly high affinity for colloids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Human dermal absorption of chlorinated organophosphate flame retardants; implications for human exposure

Tris-2-chloroethyl phosphate (TCEP), tris (1-chloro-2-propyl) phosphate (TCIPP) and tris-1,3-dichloropropyl phosphate (TDCIPP) are organophosphate flame retardants (PFRs) widely applied in a plethora of consumer products despite their carcinogenic potential. Human dermal absorption of these PFRs is investigated for the first time using human ex vivo skin and EPISKIN™ models. Results of human ex vivo skin experiments revealed 28%, 25% and 13% absorption of the applied dose (500 ng/cm{sup 2}, finite dose) of TCEP, TCIPP and TDCIPP, respectively after 24 h exposure. The EPISKIN™ model showed enhanced permeability values (i.e. weaker barrier), that were respectively 16%, 11% and 9% for TCEP, TCIPP and TDCIPP compared to human ex vivo skin. However, this difference was not significant (P > 0.05). Estimated permeability constants (K{sub p}, cm/h) showed a significant negative correlation with log K{sub ow} for the studied contaminants. The effect of hand-washing on dermal absorption of PFRs was investigated. Washing reduced overall dermal absorption, albeit to varying degrees depending on the physicochemical properties of the target PFRs. Moreover, slight variations of the absorbed dose were observed upon changing the dosing solution from acetone to 20% Tween 80 in water, indicating the potential influence of the dose vehicle on the dermal absorption of PFRs. Finally, estimated dermal uptake of the studied PFRs via contact with indoor dust was higher in UK toddlers (median ΣPFRs = 36 ng/kg bw day) than adults (median ΣPFRs = 4 ng/kg bw day). More research is required to fully elucidate the toxicological implications of such exposure. - Highlights: • Human dermal absorption of PFRs was studied using human ex vivo skin and EPISKIN™. • Absorbed fractions of TCEP, TCIPP and TDCIPP were 28%, 25% and 13% of applied dose. • Permeability constants showed significant negative correlation to log K{sub ow} of PFRs. • Skin washing reduced the overall dermal absorption of target PFRs to varying degrees. • Toddlers are more exposed to PFRs via dermal contact with indoor dust than adults.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plutonium Speciation and Oxidation State Distributions in the Presence of Citrate

We explored the speciation and kinetics of the Pu(VI)-citrate and Pu(III)-citrate systems (pH m = 2.5–11.0, I = 0.1 M NaCl, T = 23 °C, O 2 (g) < 2 ppm) using ultraviolet–visible–near-infrared (UV–vis–NIR) spectrophotometry, solvent extraction, and PHREEQC modeling. Formation constants were determined for PuO 2 (HcitH)(aq) (log K° 1,1 = 1.09 ± 0.05) and PuO 2 (HcitH)(citH) 3– (log K° 1,2 = -0.20 ± 0.07), and evidence for (PuO 2 ) m (citH –k ) n (OH) x 2m(3+k)n–x was identified under alkaline conditions. Pu(VI) species were found to be less stable in the presence of citrate than in the absence of citrate (t ≤ 168 days); the rate of reduction increased with increasing pH. Further, the direct reduction of Pu(VI) to Pu(IV) was required to fit experimental data in the presence of citrate but did not improve the fit for Pu in the absence of citrate. We also observed increased Pu(III) stability in the presence of citrate (t ≤ 293 days), with higher concentrations of Pu(III) favored at lower pH. Finally, we provide evidence of a radiolysis-driven mechanism for the citrate-mediated reduction of plutonium that involves electron transfer from the oxidative breakdown of citrate. Our work highlights the need to investigate the redox effect of organic ligands on plutonium oxidation states under repository-relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗