Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Diffusion of Aluminum Into Steel Substrates By Means Of Hot Dip Aluminizing

Surface coating is an efficient and economical method to obtain desirable material surfaces properties. As compared to other coating techniques, hot dip coating can be considered as the most economical way to protect steel surfaces. Hot dip aluminizing technique was investigated in this study. Experiments have been conducted on the mild steel substrates with 10 mm diameter. The substrates were dipped into the molten aluminum maintained at temperature 750 deg. C for 5, 10, 15, 20, 25 and 30 minutes. Optical microscopy, scanning electron microscope and energy dispersive X-ray spectroscopy were used in this investigation. From the microstructure observation, it showed the appearance of intermetallic layer covered by the top layer of Al on the mild steel substrate increased with the increase in dipping time. The result of EDX analysis revealed the existence of Fe and Al in form of new Al-Fe phase. This indicated the possible formation of the intermetallic layers.

36 MATERIALS SCIENCE↗

The Microstructure and Hardness of Hot Dip Galvanized Steel During Wire Drawing

The steel wire samples are hot-dip-galvanized. The zinc coating is preformed using the standard method. To recognize the behavior of the zinc coated steel wire during the submission to deformation, the wire samples are drawn on a machine designed for this aim and then investigated. In this research is represented the phase structure of the zinc coated samples. Afterwards the thickness of the layer and the hardness of the hot-dip galvanized steel depending on the drawing is represented.

36 MATERIALS SCIENCE↗

FEM Analysis of Defects and Microstructure Evolution during Hot Working of Specialty Alloys

The main goals of process simulation in manufacturing are to reduce manufacturing/part development time and cost as well as increasing quality and productivity. In this study, porosity evolution is modeled by introducing a porosity evolution parameter, which is function of strain rate and stress triaxiality factor. Applicability is shown by simulating the first two stages of an ingot conversion process; variables are die geometry and bite size. Moreover, application is extended to hot shape rolling, where the geometry of the oval passes is the variable. Validation is carried out through evaluation of samples from final products. Also, surface defects in hot shape rolling are tracked by studying the instability during the rolling of the material. Plastic work approach was used to judge the occurrence of instability during the process. The effect of number of passes and roll gap was examined to predict the occurrence of surface cracking. On the other hand, unrecrystallized grains and coarse grain problem are other significant problems in the metalworking industry. A recrystallization model is implemented in a finite element framework, to study the effect of forging parameters on the microstructure evolution during ingot conversion process of a superalloy.

36 MATERIALS SCIENCE↗

Plasmon effects on the entanglement fidelity for elastic collisions in hot quantum plasmas

The plasmon and screening effects on the entanglement fidelity for the elastic electron-ion collision are investigated in hot quantum plasmas. The partial wave analysis and effective interaction including the plasmon couplings are employed to obtain the entanglement fidelity function in hot quantum plasmas. It is shown that the plasmon effect enhances the entanglement fidelity in quantum plasmas for 0<{beta}({identical_to}({Dirac_h}/2{pi}){omega}{sub p}/k{sub B}T)<0.8 and, however, suppresses the entanglement fidelity for 0.8<{beta}<1, where {omega}{sub p} is the plasmon frequency, k{sub B} is the Boltzmann constant, and T is the plasma temperature. It is also found that the entanglement fidelity decreases with increasing Debye length and collision energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-focusing of circularly polarized laser pulse in the hot magnetized plasma in the quasi-neutral limit

In this paper the problem of self-focusing of an intense laser beam in the hot magnetized plasma is studied. Using a relativistic two-fluid model, the propagation of intense circularly polarized laser beam along the external magnetic field is considered. The nonlinear equation describing the interaction of laser beam with magnetized hot plasma in the quasi-neutral approximation is derived. Expanding the nonlinear terms of current density and saving only the parabolic nonlinear terms, we investigated the self-focusing phenomenon for right- and left-hand circularly polarized laser beam. The evolution of laser beam spot size with Gaussian profile for both polarizations is considered and the effect of the temperature and external magnetic field on the self-focusing quality is studied. It is shown that for the right-hand polarization, the effect of temperature and external magnetic field on the self-focusing property is more considerable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot atom chemistry and radiopharmaceuticals

The chemical products made in a cyclotron target are a combined result of the chemical effects of the nuclear transformation that made the radioactive atom and the bulk radiolysis in the target. This review uses some well-known examples to understand how hot atom chemistry explains the primary products from a nuclear reaction and then how radiation chemistry is exploited to set up the optimal product for radiosynthesis. It also addresses the chemical effects of nuclear decay. There are important principles that are common to hot atom chemistry and radiopharmaceutical chemistry. Both emphasize short-lived radionuclides and manipulation of high specific activity nuclides. Furthermore, they both rely on radiochromatographic separation for identification of no-carrieradded products.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measured hot-electron intensity thresholds quantified by a two-plasmon-decay resonant common-wave gain in various experimental configurations

The fraction of laser energy converted into hot electrons by the two-plasmon-decay instability is found to have different overlapped intensity thresholds for various configurations on the Omega Laser Facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997); J. H. Kelly et al., J. Phys. IV 133, 75 (2006)]. A factor-of-2 difference in the overlapped intensity threshold is observed between two- and four-beam configurations. The overlapped intensity threshold increases by a factor of 2 between the 4- and 18-beam configurations and by a factor of 3 between the 4- and 60-beam configurations. This is explained by a linear common-wave model where multiple laser beams drive a common electron-plasma wave in a wavevector region that bisects the laser beams (resonant common-wave region in k-space). These experimental results indicate that the hot-electron threshold depends on the hydrodynamic parameters at the quarter-critical density surface, the configuration of the laser beams, and the sum of the intensity of the beams that share the same angle with the common-wave vector.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic nonlinear dynamics of an intense laser beam propagating in a hot electron-positron magnetoactive plasma

The present study is devoted to investigation of the nonlinear dynamics of an intense laser beam interacting with a hot magnetized electron-positron plasma. Propagation of the intense circularly polarized laser beam along an external magnetic field is studied using a relativistic two-fluid model. A modified nonlinear Schrödinger equation is derived based on the quasi-neutral approximation, which is valid for hot plasma. Light envelope solitary waves and modulation instability are studied, for one-dimensional case. Using a three-dimensional model, spatial-temporal development of laser pulse is investigated. Occurrence of some nonlinear phenomena such as self-focusing, self-modulation, light trapping, and filamentation of laser pulse is discussed. Also the effect of external magnetic field and plasma temperature on the nonlinear evolution of these phenomena is studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using penumbral imaging to measure micrometer size plasma hot spots in Gbar equation of state experiments on the National Ignition Facility

We have developed an experimental platform for absolute equation of state measurements up to Gbar pressures on the National Ignition Facility (NIF) within the Fundamental Science Program. We use a symmetry-tuned hohlraum drive to launch a spherical shock wave into a solid CH sphere. Streaked radiography is the primary diagnostic to measure the density change at the shock front as the pressure increases towards smaller radii. At shock stagnation in the center of the capsule, we observe a short and bright x-ray self emission from high density (∼50 g/cm{sup 3}) plasma at ∼1 keV. Here, we present results obtained with penumbral imaging which has been carried out to characterize the size of the hot spot emission. This allows extending existing NIF diagnostic capabilities for spatial resolution (currently ∼10 μm) at higher sensitivity. At peak emission we find the hot spot radius to be as small as 5.8 +/− 1 μm, corresponding to a convergence ratio of 200.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-impedance wire grid method to study spatiotemporal behavior of hot electron clump generated in a plasma

High-impedance Wire Grid (HIWG) detector has been developed to study spatiotemporal behavior of a hot electron clump generated in an electron cyclotron resonance (ECR) plasma. By measuring the floating potentials of the wire electrodes, and generating structure matrix made of geometrical means of the floating potentials, the HIWG detector reconstructs the spatial distribution of high-temperature electron clump at an arbitrary instant of time. Time slices of the spike event in floating potential revealed the growth and decay process of a hot spot occurs in an ECR plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultrafine nanoporous palladium-aluminum film fabricated by citric acid-assisted hot-water-treatment of aluminum-palladium alloy film

Hot-water-treatment has been adapted to fabricate ultrafine nanoporous palladium-aluminum film from aluminum-palladium alloy film. Using citric acid as a chelating agent, a precipitation of boehmite (aluminum oxide hydroxide, AlOOH) on the nanoporous palladium-aluminum film was suppressed. According to cross-sectional scanning transmission electron microscopy observations, the ligament/pore sizes of the prepared nanoporous film were considerably small (on the order of 10 nm). Since this fabrication method only requires aluminum alloy film and hot-water with chelating agent, the ultrafine nanoporous film can be prepared simply and environmentally friendly.

36 MATERIALS SCIENCE↗

Numerical study of the generation of runaway electrons in a gas diode with a hot channel

A new method for increasing the efficiency of runaway electron beam generation in atmospheric pressure gas media has been suggested and theoretically proved. The method consists of creating a hot region (e.g., a spark channel or a laser plume) with a decreased numerical density of gas molecules (N) near the cathode. In this method, the ratio E/N (E—electric field strength) is increased by decreasing N instead of increasing E, as has been done in the past. The numerical model that is used allows the simultaneous calculation of the formation of a subnanosecond gas discharge and the generation of runaway electrons in gas media. The calculations have demonstrated the possibility of obtaining current pulses of runaway electrons with amplitudes of hundred of amperes and durations of more than 100 ps. The influence of the hot channel geometry on the parameters of the generated beam has been investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stress analysis for wall structure in mobile hot cell design

Malaysian Nuclear Agency is developing a Mobile Hot Cell (MHC) in order to handle and manage Spent High Activity Radioactive Sources (SHARS) such as teletherapy heads and irradiators. At present, there are only two units of MHC in the world, in South Africa and China. Malaysian Mobile Hot cell is developed by Malaysian Nuclear Agency with the assistance of IAEA expert, based on the design of South Africa and China, but with improved features. Stress analysis has been performed on the design in order to fulfil the safety requirement in operation of MHC. This paper discusses the loading analysis effect from the sand to the MHC wall structure.

07 ISOTOPE AND RADIATION SOURCES↗

X-RAY DIAGNOSTICS OF THERMAL CONDITIONS OF THE HOT PLASMAS IN THE CENTAURUS CLUSTER

X-ray data of the Centaurus cluster, obtained with XMM-Newton for 45 ks, were analyzed. Deprojected EPIC spectra from concentric thin-shell regions were reproduced equally well by a single-phase plasma emission model, or by a two-phase model developed by ASCA, both incorporating cool (1.7-2.0 keV) and hot ({approx} 4 keV) plasma temperatures. However, EPIC spectra with higher statistics, accumulated over three-dimensional thick-shell regions, were reproduced better by the two-phase model than by the singe-phase one. Therefore, hot and cool plasma phases are inferred to co-exist in the cluster core region within {approx} 70 kpc. The iron and silicon abundances of the plasma were reconfirmed to increase significantly toward the center, while that of oxygen was consistent with being radially constant. The implied nonsolar abundance ratios explain away the previously reported excess X-ray absorption from the central region. Although an additional cool ({approx} 0.7 keV) emission was detected within {approx} 20 kpc of the center, the RGS data gave tight upper limits on any emission with temperatures below {approx} 0.5 keV. These results are compiled into a magnetosphere model, which interprets the cool phase as confined within closed magnetic loops anchored to the cD galaxy. When combined with the so-called Rosner-Tucker-Vaiana mechanism which applies to solar coronae, this model can potentially explain basic properties of the cool phase, including its temperature and thermal stability.

99 GENERAL AND MISCELLANEOUS↗

TOTAL SOLAR ECLIPSE OBSERVATIONS OF HOT PROMINENCE SHROUDS

Using observations of the corona taken during the total solar eclipses of 2006 March 29 and 2008 August 1 in broadband white light and in narrow bandpass filters centered at Fe X 637.4 nm, Fe XI 789.2 nm, Fe XIII 1074.7 nm, and Fe XIV 530.3 nm, we show that prominences observed off the solar limb are enshrouded in hot plasmas within twisted magnetic structures. These shrouds, which are commonly referred to as cavities in the literature, are clearly distinct from the overlying arch-like structures that form the base of streamers. The existence of these hot shrouds had been predicted by model studies dating back to the early 1970s, with more recent studies implying their association with twisted magnetic flux ropes. The eclipse observations presented here, which cover a temperature range of 0.9 to 2 x10{sup 6} K, are the first to resolve the long-standing ambiguity associated with the temperature and magnetic structure of prominence cavities.

79 ASTRONOMY AND ASTROPHYSICS↗

A DOUBLED DOUBLE HOT SPOT IN J0816+5003 AND THE LOGARITHMIC SLOPE OF THE LENSING POTENTIAL

We present an analysis of observations of the doubly lensed double hot spot in the giant radio galaxy J0816+5003 from MERLIN, MDM, WIYN, WHT, UKIRT, and the VLA. The images of the two hot spot components span a factor of 2 in radius on one side of the lensing galaxy at impact parameters of less than 500 pc. Hence, we measure the slope of the lensing potential over a large range in radius, made possible by significant improvement in the accuracy of registration of the radio and optical frame and higher resolution imaging data than previously available. We also infer the lens and source redshifts to be 0.332 and {approx}1, respectively. Purely on the basis of lens modeling, and independently of stellar velocity dispersion measurements, we find the potential to be very close to isothermal.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DYNAMICS OF STELLAR CORONAE HARBORING HOT JUPITERS. I. A TIME-DEPENDENT MAGNETOHYDRODYNAMIC SIMULATION OF THE INTERPLANETARY ENVIRONMENT IN THE HD 189733 PLANETARY SYSTEM

We carry out the first time-dependent numerical magnetohydrodynamic modeling of an extrasolar planetary system to study the interaction of the stellar magnetic field and wind with the planetary magnetosphere and outflow. We base our model on the parameters of the HD 189733 system, which harbors a close-in giant planet. Our simulation reveals a highly structured stellar corona characterized by sectors with different plasma properties. The star-planet interaction (SPI) varies in magnitude and complexity, depending on the planetary phase, planetary magnetic field strength, and the relative orientation of the stellar and planetary fields. It also reveals a long, comet-like tail which is a result of the wrapping of the planetary magnetospheric tail by its fast orbital motion. A reconnection event occurs at a specific orbital phase, causing mass loss from the planetary magnetosphere that can generate a hot spot on the stellar surface. The simulation also shows that the system has sufficient energy to produce hot spots observed in Ca II lines in giant planet hosting stars. However, the short duration of the reconnection event suggests that such SPI cannot be observed persistently.

79 ASTRONOMY AND ASTROPHYSICS↗

SUBMILLIMETER INTERFEROMETRY OF THE LUMINOUS INFRARED GALAXY NGC 4418: A HIDDEN HOT NUCLEUS WITH AN INFLOW AND AN OUTFLOW

We have observed the nucleus of the nearby luminous infrared galaxy NGC 4418 with subarcsec resolution at 860 and 450 {mu}m for the first time to characterize its hidden power source. A {approx}20 pc (0.''1) hot dusty core was found inside a 100 pc scale concentration of molecular gas at the galactic center. The 860 {mu}m continuum core has a deconvolved (peak) brightness temperature of 120-210 K. The CO(3-2) peak brightness temperature there is as high as 90 K at 50 pc resolution. The core has a bolometric luminosity of about 10{sup 11} L {sub Sun }, which accounts for most of the galaxy luminosity. It is Compton thick (N {sub H} {approx}> 10{sup 25} cm{sup -2}) and has a high luminosity-to-mass ratio (L/M) {approx} 500 L {sub Sun} M {sub Sun} {sup -1} as well as a high luminosity surface density 10{sup 8.5{+-}0.5} L {sub Sun} pc{sup -2}. These parameters are consistent with an active galactic nucleus to be the main luminosity source (with an Eddington ratio about 0.3), while they can be also due to a young starburst near its maximum L/M. We also found an optical color (reddening) feature that we attribute to an outflow cone emanating from the nucleus. The hidden hot nucleus thus shows evidence of both an inflow, previously seen with absorption lines, and the new outflow reported here in a different direction. The nucleus must be rapidly evolving with these gas flows.

79 ASTRONOMY AND ASTROPHYSICS↗