Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grain Growth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Theory of Ostwald ripening in a two-component system

When a two-component system is cooled below the minimum temperature for its stability, it separates into two or more immiscible phases. The initial nucleation produces grains (if solid) or droplets (if liquid) of one of the phases dispersed in the other. The dynamics by which these nuclei proceed toward equilibrium is called Ostwald ripening. The dynamics of growth of the droplets depends upon the following factors: (1) The solubility of the droplet depends upon its radius and the interfacial energy between it and the surrounding (continuous) phase. There is a critical radius determined by the supersaturation in the continuous phase. Droplets with radii smaller than critical dissolve, while droplets with radii larger grow. (2) The droplets concentrate one component and reject the other. The rate at which this occurs is assumed to be determined by the interdiffusion of the two components in the continuous phase. (3) The Ostwald ripening is constrained by conservation of mass; e.g., the amount of materials in the droplet phase plus the remaining supersaturation in the continuous phase must equal the supersaturation available at the start. (4) There is a distribution of droplet sizes associated with a mean droplet radius, which grows continuously with time. This distribution function satisfies a continuity equation, which is solved asymptotically by a similarity transformation method.

Baird, J. K.↗
NASA NTRS1987

Dynamic and static fatigue behavior of sintered silicon nitrides

The dynamic and static fatigue behavior of Kyocera SN220M sintered silicon nitride at 1000 C was studied. Fractographic analysis of the material failing in dynamic fatigue revealed the presence of slow crack growth (SCG) at stressing rates below 41 MPa/min. Under conditions of static fatigue this material also displayed SCG at stresses below 345 MPa. SCG appears to be controlled by microcracking of the grain boundaries. The crack velocity exponent (n) determined from both dynamic and static fatigue tests ranged from 11 to 16.

Chang, J.↗
NASA NTRS1994

Accretionary history of the Archean Barberton Greenstone Belt (3.55-3.22 Ga), southern Africa

The 3.55-3.22 Ga Barberton Greenstone Belt, South Africa and Swaziland, and surrounding coeval plutons can be divided into four tectono-stratigraphic blocks that become younger toward the northwest. Each block formed through early mafic to ultramafic volcanism (Onverwacht Group), probably in oceanic extensional, island, or plateau settings. Volcanism was followed by magmatic quiescence and deposition of fine-grained sediments, possibly in an intraplate setting. Late evolution involved underplating of the mafic crust by tonalitic intrusions along a subduction-related magmatic arc, yielding a thickened, buoyant protocontinental block. The growth of larger continental domains occurred both through magmatic accretion, as new protocontinental blocks developed along the margins of older blocks, and when previously separate blocks were amalgamated through tectonic accretion. Evolution of the Barberton Belt may reflect an Early Archean plate tectonic cycle that characterized a world with few or no large, stabilized blocks of sialic crust.

NASA Discipline Exobiology↗
DOE OSTI2020

Hierarchical Membrane Dynamics in Phase-Separated Model Membranes

Lipid membranes, the primary matrix of cell membranes, exhibit a hierarchy of dynamics from molecular motions to collective undulations, which control spatiotemporal membrane phenomena and regulate various cellular functions. Thus, understanding how various dynamic modes influence membrane behavior is crucial to uncovering the design rules of cell membranes and implementing them in future technologies. Previous membrane dynamics studies using neutron spin-echo spectroscopy (NSE) have shed light on the dependence of collective membrane fluctuations on viscoelastic membrane properties, demonstrating that thickness fluctuation modes (100ns) are dictated by membrane viscosity, which directly governs fast (ps) molecular diffusive motions. Here, we focus on phase-separating lipid membranes, composed of DMPC:DSPC mixtures, to understand the effect of domain formation/growth on hierarchical matrix dynamics using selective lipid deuteration and different neutron spectroscopy techniques. NSE measurements on DMPC:DSPC-d83 (70:30 mol%) show that bending rigidity of the DMPC-rich matrix graduallyincreases with decreasing temperature - as the fully-fluid membrane approaches the upper phase transition (i.e. with the formation of transient DSPC clusters) - and increases further in the phase coexistence region with the growth of DSPC domains. Comparatively, NSE measurements on DMPC-d54:DSPC-d83 vesicles show pronounced matrix thickness fluctuations in the fully-fluid phase and drastic suppression of this fluctuation mode in the gel-fluid coexistence phase, even when the DMPC-rich matrix is still in its fluid phase. This suppression in fluctuations suggests an increase in the matrix viscosity with the growth of gel DSPC domains, which is further investigated by selectively measuring lipid diffusion in the DMPC-rich matrix using neutron backscattering spectroscopy. Comparisons of the experimental results with coarse-grained MD simulationsillustrate the underlying coupling mechanisms. Overall, these observations indicate a clear mechanical and viscoelastic coupling betweenlipid domains and their host matrix, suggesting that domain formation influences membrane properties beyond local effects.

Carrillo, Jan Michael↗
NASA NTRS2003

Effects of Pre-Existing Target Structure on the Formation of Large Craters

The shapes of large-scale craters and the mechanics responsible for melt generation are influenced by broad and small-scale structures present in a target prior to impact. For example, well-developed systems of fractures often create craters that appear square in outline, good examples being Meteor Crater, AZ and the square craters of 433 Eros. Pre-broken target material also affects melt generation. Kieffer has shown how the shock wave generated in Coconino sandstone at Meteor crater created reverberations which, in combination with the natural target heterogeneity present, created peaks and troughs in pressure and compressed density as individual grains collided to produce a range of shock mineralogies and melts within neighboring samples. In this study, we further explore how pre-existing target structure influences various aspects of the cratering process. We combine experimental and numerical techniques to explore the connection between the scales of the impact generated shock wave and the pre-existing target structure. We focus on the propagation of shock waves in coarse, granular media, emphasizing its consequences on excavation, crater growth, ejecta production, cratering efficiency, melt generation, and crater shape. As a baseline, we present a first series of results for idealized targets where the particles are all identical in size and possess the same shock impedance. We will also present a few results, whereby we increase the complexities of the target properties by varying the grain size, strength, impedance and frictional properties. In addition, we investigate the origin and implications of reverberations that are created by the presence of physical and chemical heterogeneity in a target.

Barnouin-Jha, O. S.↗
NASA NTRS1976

Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

The technical and economic feasibility of producing solar cell quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large grain polycrystalline silicon was investigated. The dip-coating methods studied were directed toward a minimum cost process with the ultimate objective of producing solar cells with a conversion efficiency of 10% or greater. The technique shows excellent promise for low cost, labor-saving, scale-up potentialities and would provide an end product of sheet silicon with a rigid and strong supportive backing. An experimental dip-coating facility was designed and constructed, several substrates were successfully dip-coated with areas as large as 25 sq cm and thicknesses of 12 micron to 250 micron. There appears to be no serious limitation on the area of a substrate that could be coated. Of the various substrate materials dip-coated, mullite appears to best satisfy the requirement of the program. An inexpensive process was developed for producing mullite in the desired geometry.

Heaps, J. D.↗
NASA NTRS1983

Analysis of defect structure in silicon. Characterization of SEMIX material. Silicon sheet growth development for the large area silicon sheet task of the low-cost solar array project

Statistically significant quantitative structural imperfection measurements were made on samples from ubiquitous crystalline process (UCP) Ingot 5848 - 13C. Important correlation was obtained between defect densities, cell efficiency, and diffusion length. Grain boundary substructure displayed a strong influence on the conversion efficiency of solar cells from Semix material. Quantitative microscopy measurements gave statistically significant information compared to other microanalytical techniques. A surface preparation technique to obtain proper contrast of structural defects suitable for quantimet quantitative image analyzer (QTM) analysis was perfected and is used routinely. The relationships between hole mobility and grain boundary density was determined. Mobility was measured using the van der Pauw technique, and grain boundary density was measured using quantitative microscopy technique. Mobility was found to decrease with increasing grain boundary density.

Natesh, R.↗
DOE OSTI2020

Temporal covariance structure of multi-spectral phenotypes and their predictive ability for end-of-season traits in maize

Vegetation indices (VIs) derived from multi-spectral imaging (MSI) platforms can be used to study properties of crop canopy, providing non-destructive phenotypes that could be used to better understand growth curves throughout the growing season. To investigate the amount of variation present in several VIs and their relationship with important end-of-season traits, genetic and residual (co)variances for VIs, grain yield and moisture were estimated using data collected from maize hybrid trials. The VIs considered were Normalized Difference Vegetation Index (NDVI), Green NDVI, Red Edge NDVI, Soil-Adjusted Vegetation Index, Enhanced Vegetation Index and simple Ratio of Near Infrared to Red (Red) reflectance. Genetic correlations of VIs with grain yield and moisture were used to fit multi-trait models for prediction of end-of-season traits and evaluated using within site/year cross-validation. To explore alternatives to fitting multiple phenotypes from MSI, random regression models with linear splines were fit using data collected in 2016 and 2017. Heritability estimates ranging from (0.10 to 0.82) were observed, indicating that there exists considerable amount of genetic variation in these VIs. Furthermore, strong genetic and residual correlations of the VIs, NDVI and NDRE, with grain yield and moisture were found. Considerable increases in prediction accuracy were observed from the multi-trait model when using NDVI and NDRE as a secondary trait. Finally, random regression with a linear spline function shows potential to be used as an alternative to mixed models to fit VIs from multiple time points.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Decreases in polyunsaturated fatty acid content improve heat stress tolerance during flowering and silicle development in pennycress (Thlaspi arvense L.)

Introduction: Pennycress (Thlaspi arvense L.) is an emerging intermediate oilseed crop grown in the offseason between primary summer crops to produce three cash crops in two years. Previous efforts to improve seed oil quality produced Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) genome-edited lines with decreased polyunsaturated fatty acids (PUFAs) levels, through loss of function of the FATTY ACID DESATURASE 2 (FAD2), REDUCED OLEATE DESATURATION1 (ROD1), and FATTY ACID ELONGASE1 (FAE1) genes. While seed oil compositions were previously characterized, it remains unknown how vegetative and reproductive tissue compositions might differ and affect tolerance to high temperature (HT) conditions.Methods: In four growth chamber experiments, we explored HT tolerance during flowering and silicle development. Plants were subjected to a 34 °C day/28 °C night regime and compared to control plants maintained at 20 °C. Pollen grain viability at a range of temperatures, lipid peroxidation and proline content in leaves and silicles following HT, and seed yield were measured.Results: Both fad2 and rod1 mutant lines had relatively higher pollen viability (71% and 54% respectively) under moderately elevated temperature (28 °C) compared to wild-type controls (37%). They also showed smaller decreases in seed yield (0% and 40% for fad2 and rod1 respectively, compared to 61% for wild type), following HT exposure during late flowering and early silicle development. Silicles of fad2 plants experienced 65% less lipid peroxidation under HT and 55% less buildup of proline, signifying less stress.Discussion: The differential results of fad2 and rod1 are likely due to the role of FAD2 in membranes in all tissues, whereas ROD1 predominantly affects triacylglycerol (TAG) composition in oil-accumulating tissues including pollen. Our results indicate that decreasing PUFAs, through gene editing, can increase heat tolerance in reproductive tissues as an auxiliary benefit accompanying improved seed oil quality.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1984

Cellular interface morphologies in directional solidification. II - The effect of grain boundaries

A singular perturbation analysis valid for small grain-boundary slopes is used with the one-sided model for solidification to show that grain boundaries introduce imperfections into the symmetry of the developing cellular interfaces which rupture the junction between the family of planar shapes and the bifurcating cellular families. Undulating interfaces are shown to develop first near grain boundaries, and to evolve with decreasing temperature gradient either by a smooth transition from the almost planar family or by a sudden jump to moderate-amplitude cellular forms, depending on the growth rate.

Ungar, Lyle H.↗
NASA NTRS1989

Gas-phase formation of silicon carbides, oxides, and sulphides from atomic silicon ions

A systematic experimental study of the kinetics and mechanisms of the chemical reactions in the gas phase between ground-state Si(+)2p and a variety of astrophysical molecules. The aim of this study is to identify the reactions which trigger the formation of chemical bonds between silicon and carbon, oxygen and sulphur, and the chemical pathways which lead to further molecular growth. Such knowledge is valuable in the identification of new extraterrestrial silicon-bearing molecules and for an assessment of the gas-phase transition from atomic silicon to silicon carbide and silicate grain particles in carbon-rich and oxygen-rich astrophysical environments.

Bohme, Diethard K.↗
NASA NTRS2003

Studies of Elementary Reactions of Chemical Importance in the Atmospheres of Planets

The paper discusses the following: 1. F + Cl2 Kinetics. Absolute rate constant for the reaction F(P-2) with Cl2 has been measured using the discharge flow kinetics technique coupled to mass spectrometric detection at T = 180 - 360 K and 1 Torr He nominal pressure. 2. Vapor pressure system. The main effort on the vapor pressure system involved the design and construction of an insulated enclosure ("Bakeout Box") to improve the uniformity of heating during the bakeout process. 3. Sunphotometer System. This period saw the completion of the two-channel sunphotometer, its calibration, and two field deployments. 4. Vibrational-to-translation (V-T) transfer rates for light hydrocarbons at low temperatures are important parameters in thermal-structure models of the upper atmospheres of the outer planets and their satellites. However, the required data are either simply not available or do not extend to the low temperatures found in those systems. Because methane is such an important constituent in outer planet atmospheres, we have initiated a program to measure the temperature dependence of (V-T) rates for its relaxation by appropriate collision partners. 5. The central focus of this research has been the vapor phase nucleation and growth of metals/refractory species into small particles and the aggregation of these primary particles into larger structures. These topics are part of the broader goal of understanding the conditions under which interstellar dust grains condense from stellar outflows and how these small dust grains coagulate into larger bodies such as planetesimals or planets.

Nesbitt, Fred L.↗
DOE OSTI2026

Kinetic interplay between chemical short-range order and grain boundaries in NiCoCr alloys under irradiation

Chemical short-range order (CSRO) and grain boundary (GB) engineering are routes to enhance radiation damage tolerance in alloys. Here, we reveal that CSRO and GB interact in a sink-strength-dependent manner under irradiation in NiCoCr. Near a weak sink (Σ3 GB), CSRO reduces defect cluster growth by slowing interstitial diffusion and enhancing vacancy-interstitial recombinations. In contrast, near strong sinks such as Σ5 GBs, CSRO and GB act competitively for interstitial accumulation but synergistically to suppress large stacking-fault tetrahedra growth via enhanced recombination. Such mechanistic duality underscores the need for coordinated control of CSRO stability and GB sink strength to enhance radiation damage tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Twin suppression effect of dihydroxy-benzene isomers during the secondary growth of b -oriented zeolite MFI nanosheet films

In this study, the presence of MFI twin crystals on b-axis oriented zeolite MFI nanosheet films was suppressed by adding dihydroxy-benzene isomers in the synthesis mixture. The resulting nanosheet films exhibit good intergrowth and a small grain thickness of 30–45 nm within a relatively short synthesis time (hours). The possible twin suppression mechanisms for the three isomers are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Crack growth behavior of 2219-T87 aluminum alloy from 20 K (-423 F) to 422 K (300 F)

The aluminum alloy 2219-T87 has great potential for use as a cryogenic material for various manned and unmanned aerospace vehicles. Although its properties are generally known, toughness characteristics in various grain directions when the material is machined from thick plates and subjected to various environments have not been documented. This program, sponsored by the NASA Johnson Space Center, was designed to determine these properties between 20 K (-423 F) and 423 K (300 F).

Witzell, W. E.↗
NASA NTRS1977

Theoretical aspects of undercooling, nucleation and growth of metals in space

A mathematical model which can predict solid material properties from known melt properties and solidification environment is being developed to aid in selecting materials systems which could benefit scientifically or commercially from experimentation in space. In its present, preliminary form, the model calculates grain size and dendrite morphology from the undercooling parameter and the parameter which characterizes heterogeneous nucleation. Calculations with the present model are compared to experimental data, and needed improvements in the model are described. Some theoretical problems relating to undercooling and environmentally-induced solute segregation are also discussed.

Miller, R. I.↗
DOE OSTI2025

A Diffuse-Interface Model for Predicting the Evolution of Metallic Negative Electrodes and Interfacial Voids in Solid-State Batteries with Homogeneous and Polycrystalline Solid Electrolyte Separators

Here, this paper presents a novel diffuse-interface electrochemical model that simultaneously simulates the evolution of the metallic negative electrode and interfacial voids during the stripping and plating processes in solid-state batteries. The utility and validity of this model are demonstrated for the first time on a cell with a sodium (Na) negative electrode and a Na-β″-alumina ceramic solid electrolyte (SE) separator. Three examples are simulated. First, stripping and plating with a perfect electrode/electrolyte interface; second, stripping and plating with a single interfacial void at the electrode/electrolyte interface; third, stripping with multiple interfacial voids. Both homogeneous and polycrystalline SEs with low and high-conductivity grain boundaries (GBs) are considered for all three examples. Heterogeneous GB conductivity marginally impacts the thickness of the Na electrode in cases with a perfect electrode/electrolyte interface. Moreover, it results in local changes to void growth due to the interactions between the void edge and the GBs. The void growth rate is a linear function of the flux of Na atoms at the void edge, which in turn depends on the applied current density. We also show that the void coalescence rate increases with applied current density and can be marginally influenced by GB conductivity.

batteries↗