Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Novel Structural Motif To Promote Mg-Ion Mobility: Investigating ABO 4 Zircons as Magnesium Intercalation Cathodes

There is an increasing need for sustainable energy storage solutions as fossil fuels are replaced by renewable energy sources. Multivalent batteries, specifically Mg batteries, are one energy storage technology that researchers continue to develop with hopes to surpass the performance of Li-ion batteries. However, the limited energy density and transport properties of Mg cathodes remain critical challenges preventing the realization of high-performance multivalent batteries. In this work, ABO 4 zircon materials (A = Y, Eu and B = V, Cr) are computationally and experimentally evaluated as Mg intercalation cathodes. Remarkably good Mg-ion transport properties were predicted and Mg-ion intercalation was experimentally verified in sol-gel synthesized zircon YVO 4 , EuVO 4 , and EuCrO 4 . Among them, EuVO 4 exhibited the best electrochemical performance and demonstrated repeated reversible cycling. While we believe that the one-dimensional diffusion channels and redox-active species tetragonal coordination limit the value of many zircons as high-performance cathodes, their unique structural motif of overlapping polyhedra along the diffusion pathway appears instrumental for promoting good Mg-ion mobility. The motif results in a favorable "6-5-4" change in coordination that avoids unfavorable sites with lower coordination along the diffusion pathway and a structural design metric for future Mg cathode development.

25 ENERGY STORAGE↗
DOE OSTI2023

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of PLA/PHB Blend Ratio and Wood Flour Loading on the Melt Rheology and Thermomechanical Properties of Biobased Polymer Composites

The development of sustainable, biobased polymer composites is crucial for reducing supply chain dependence on fossil fuels. A major challenge lies in understanding and predicting the processability of these sustainable material alternatives, which directly impacts large-scale manufacturing. Here, this study systematically investigates the effect of poly(lactic acid) (PLA)/polyhydroxybutyrate (PHB) blend ratios and wood flour (WF) loadings on the thermal, rheological, and mechanical properties of the composites. Composites were prepared via melt compounding and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), oscillatory shear melt rheology, tensile testing, and scanning electron microscopy. Results showed that increasing the PHB content lowered the glass transition temperature, while higher PHB and WF loadings decreased thermal stability. Complex viscosity decreased with increasing PHB in 0 and 10% WF, whereas it increased in 20% and 30% WF for PHB-rich blends (80/20 and 70/30 PLA/PHB) due to stronger filler interactions with flexible PHB chains. At 30% WF, PHB-containing composites also showed elastic dominance with G′ higher than G″. This behavior was confirmed by van Gurp–Palmen plots, where the phase angle decreased with increasing PHB and WF loadings. WF addition also shifted Cole–Cole plots away from semicircular terminal relaxation, while time–temperature superposition validity was maintained, confirming that polymer chain dynamics continue to dominate melt behavior. Young’s modulus increased with WF loading, while tensile strength and toughness decreased due to weaker interfacial adhesion between the matrix and the filler. Interestingly, 10% WF systems containing PHB exhibited the highest toughness among all of the filled systems, indicating synergistic reinforcement from WF fillers and PHB-induced ductility. Overall, melt rheology effectively captured the internal structure and stiffness of the composites as the formulation changed, reinforcing the concept that the PLA/PHB ratio and WF content can be tuned to adjust melt elasticity and balance mechanical property trade-offs for targeted applications.

melt rheology↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalyst Deactivation and Its Mitigation during Catalytic Conversions of Biomass

Biofuel or biochemical production from biomass, especially lignocellulosic biomass, is the most promising option to replace fossil-based products to achieve sustainability. However, biomass is currently under-utilized because biomass conversion technologies have faced significant challenges to compete with incumbent petroleum technologies. Advancement in catalysis plays a central role in increasing the readiness of biomass conversion technologies. In this respect, improving catalyst stability is one of the well-known grand challenges for biomass conversion catalysis, which impedes the scaling up and commercialization of many biomass conversion techniques. In comparison to conventional processing of fossil fuels (petroleum, coal, and natural gas), biomass conversion is largely challenged by three unique properties of biomass-derived feedstocks—high water and oxygen content, high degree and reactivity of oxygen functionalization, and high contamination by minerals and heteroatoms—which all cause greater catalyst deactivation in different ways. Therefore, research on catalyst deactivation mitigation and catalyst regeneration is extremely important for the development of biomass conversion technologies. This review aims to highlight studies on catalyst deactivation and mitigation for catalytic processes in biomass conversion, with emphasis on the deactivation caused by the three unique characteristics of biomass-derived feedstocks. Further, this work will provide information on correlating the characteristics of biomass-derived streams, their potential impact on catalyst lifetime, and a potential mitigation approach, which could guide a more rational design of a robust catalyst and processes for biomass conversion.

09 BIOMASS FUELS↗
DOE OSTI2025

Enhanced Electrocatalytic and Selective CO 2 -to-CO Reduction by a Rhenium(I) Complex Bearing 6,6′-Substituted 2,2′-Bipyridines

The electrochemical reduction of CO 2 (CO 2 RR) into value-added chemicals offers a promising route toward a circular carbon economy and reduced reliance on fossil fuels. A detailed understanding of the structural and electronic factors governing the performance of molecular CO 2 RR electrocatalysts is essential for the design of efficient, tunable systems. Here, in this study, we report a series of rhenium(I) complexes, fac-[Re I (6,6′-(R) 2 -bpy)(CO) 3 Cl] (bpy = 2,2′-bipyridine; R = mesityl (mes), 2,4,6-triisopropylphenyl (trip), or isophthalic acid (phth)) and evaluate their electrocatalytic activity. Among these, fac-[Re I (6,6′-(mes) 2 -bpy)(CO) 3 Cl] exhibited the highest performance, enabling selective CO 2 -to-CO conversion for 1 hour with Faradaic efficiency (FE) > 97%, representing an unprecedented activity level for a Re-bpy catalysts. Single-crystal X-ray diffraction and density functional theory (DFT) calculations indicated that favorable CO 2 binding could be promoted by the tilting of the 6,6′-(mes)2-bpy ligand (from the Re-CO coordination plane), providing mechanistic insight into the observed enhancement. The study consequently demonstrates a rational correlation between the CO 2 electrocatalytic performance of Re-bpy catalysts and their structural variations, as derived from X-ray data and corroborated by computational modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Simultaneous Activation of CH4 and CO2 for Concerted C-C Coupling at the Oxide-Oxide Interfaces

Catalytic conversion of CO2 and CH4 to value-added platform chemicals via the direct C-C coupling provides one of the most effective routes that not only address global climate change but also alleviate the dependency on traditional fossil fuels. Herein, three oxide-on-oxide catalysts that can realize direct C-C coupling on the basis of simultaneous activation of CH4 and CO2 were investigated using density functional theory (DFT) calculations. With the formation of oxide-on-oxide interfacial sites between the substrate (In2O3) and dispersed oxides ((ZnO)3, (ZrO2)3, or Ga2O3), it is found that CO2 can be activated at the defective site of In2O3 while the C-H bond of CH4 can be simultaneously activated at the M-O pair of the supported metal oxide. In contrast to the Eley-Rideal mechanism that C-C coupling of CO2 and CH3 stabilized on Zn-doped ceria follows, the formation of a Zn-C-C-O transition state at the active centers originates from a Langmuir-Hinshelwood mechanism where the activated CO2 also enhances the dissociative adsorption of CH4. There is a linear relationship between the C-C coupling reaction energy/activation barrier and CH4 dissociation energy. The results indicate that dissociative adsorption of CH4 plays a dominant role in the direct C-C coupling, whereas the adsorption/activation of CO2 is less significant. DFT calculation results of CH4 and CO2 to acetic acid on the (ZnO)3/In2O3 catalyst surface indicates that the C-C coupling step is the kinetically most relevant step. Compared with Ga2O3/In2O3 and (ZrO2)3/In2O3 catalyst surfaces, (ZnO)3/In2O3(110) is more active for the acetic acid formation. The present work provides new mechanistic insights into the direct C-C coupling of CH4 and CO2, which would be useful to design more efficient catalyst.

CH4 activation, C-C coupling, supported oxides, In↗
DOE OSTI2021

Double-Site Substitution of Ce into (Ba, Sr)MnO 3 Perovskites for Solar Thermochemical Hydrogen Production

Solar thermochemical hydrogen production (STCH) is a renewable alternative to hydrogen production using fossil fuels. While serial bulk experimental methods can accurately measure STCH performance, screening chemically complex materials systems for new promising candidates is more challenging. Here we identify double-site Ce-substituted (Ba,Sr)MnO 3 oxide perovskites as promising STCH candidates using a combination of bulk synthesis and high-throughput thin-film experiments. The Ce substitution on the B-site in 10H-BaMnO 3 and on the A-site in -SrMnO 3 leads to 2–3 times higher hydrogen production compared to CeO 2 , but these bulk single-site substituted perovskites suffer from incomplete reoxidation. Double-site Ce substitution on both A- and B-sites in (Ba,Sr)MnO 3 thin films increases Ce solubility and extends the stability of 10H and 3C structures, which is promising for their thermochemical reversibility. This study demonstrates a high-throughput experimental method for screening complex oxide materials for STCH applications.

08 HYDROGEN↗
DOE OSTI2026

Incorporation of Ion Transport Chains into Multivariate MOF for Improved Water Oxidation

The climate crisis demands clean energy technologies to cut CO 2 emissions from fossil fuels. Hydrogen fuel cells and solar-driven CO 2 reduction are promising, but both rely on efficient water oxidation. Polypyridyl ruthenium complexes are active catalysts for water oxidation; however, they exhibit poor stability and recyclability. Our group improved performance by embedding these complexes into metal−organic frameworks (MOFs). As water oxidation is pH-dependent, proton management further enhances reactivity. To address the issue, we introduced proton transfer pathways into the MOF structure. Specifically, we incorporated −SO 3 H groups onto the biphenyl linkers of UiO-67 loaded with [Ru(tpy)(dcbpy)OH 2 ]PF 6 catalyst (where tpy = 2,2′:6′,2″-terpyridine; dcbpy = 5,5-dicarboxy-2,2′- bipyridine). The sulfonated MOF exhibited a 2.5-fold increase in oxygen evolution compared to the nonsulfonated analogue. After 1 h of electrolysis, the sulfonated MOF exhibited a turnover number of 25 for oxygen evolution reaction compared to 10 for the native MOF, demonstrating the benefits of built-in proton management.

Catalysts↗
DOE OSTI2025

Direct Observation of Phase Change Accommodating Hydrogen Uptake in Bimetallic Nanoparticles

Hydrogen holds great promise as a cleaner alternative to fossil fuels, but its efficient and affordable storage remains a significant challenge. Bimetallic systems, such as Pd and Ni, present a promising option for storing hydrogen. In this study, using the combination of different cutting-edge X-ray and electron techniques, we observed the transformations of Pd–Ni nanoparticles, which initially consist of a NiO-rich shell surrounding a Pd-rich core but undergo a major transformation when they interact with hydrogen. During hydrogen exposure, the Pd core breaks into smaller pockets, dramatically increasing its surface area and enhancing the hydrogen storage capacity, especially in nanoparticles with lower Pd content. The findings provide a deep understanding of the morphological changes at the atomic level during hydrogen storage and contribute to designing cost-effective hydrogen storage using multimetallic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

p -Coumaroylated Lignins Are Natively Produced in Three Rosales Families

Carbon-rich plant cell walls contain biopolymers that, with some processing, could replace fossil fuels as a major component of the current petrochemical production. To realize this, biorefineries need to be paired with biomass that during the deconstruction and fractionation processes transforms into the desired products. One component of interest is p-coumarate that, in some species, can account for up to 1% of the biomass’ dry weight. When p-coumarate is present in eudicot cell walls, it is mostly part of the suberin (bark and root), acylates the γ-hydroxy group of the lignin, in part of the tannins, or is a metabolite. The current understanding of eudicot plant cell wall composition is that the lignin is sometimes acylated with acetate and rarely with hydroxycinnamates (p-coumarate or ferulate). This study identified a clear division in the Rosales in which three families produce p-coumaroylated lignins whereas the other six families showed no evidence of the trait.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advanced Microstructured BaTiO 3 -Embedded PVDF–HFP/PEO Film for Enhanced Triboelectric Interface in Self-Sufficient Energy Generation and Sensing

The global reliance on fossil fuels and natural gas has largely dominated the energy production field, but due to finite resource depletion and escalating greenhouse gas emissions, the immediate exploration of sustainable energy alternatives to mitigate climate change and ensure resource security has been a major concern. There has been extensive research into other more renewable methods of energy production, such as wind and hydropower. Of these current energy generation types, there are many areas of untapped potential from the mechanical movements generated ambiently not only in the large scale of power generation but also on a smaller scale. The piezoelectric and triboelectric effects are phenomena where these ambient mechanical movements can generate electrical energy. Developing a hybrid system that leverages both mechanical stress and surface charges presents an ideal opportunity to exploit these untapped energy sources. Producing a hybrid PVDF–HFP/PEO film with perovskite BaTiO 3 (BTO) enables ambient power harvesting from both mechanical movement and surface charge. The optimized cell produced a potential of up to 15 V and a current of 200 nA with a 68 kΩ resistor, a substantial increase from a base system with an average of 2.1 V and 40 nA. These hybrid TENGs offer significant potential for energy harvesting in small-scale applications, such as health monitoring devices and indicators in electric circuits.

Ybarra, Rigobert [University of Texas Rio Grande V↗
DOE OSTI2022

Room-Temperature Optical Detection of 14 CO 2 below the Natural Abundance with Two-Color Cavity Ring-Down Spectroscopy

Radiocarbon’s natural production, radiative decay, and isotopic rarity make it a unique tool to probe carbonaceous systems in the life and earth sciences. However, the difficulty of current radiocarbon ( 14 C) detection methods limits scientific adoption. Here, two-color cavity ring-down spectroscopy detects 14 CO 2 in room-temperature samples with an accuracy of one-tenth the natural abundance in 3 min. The intracavity pump–probe measurement uses two cavity-enhanced lasers to cancel out cavity ring-down rate fluctuations and strong one-photon absorption interference (>10 000 1/s) from hot-band transitions of CO 2 isotopologues. Selective, room-temperature detection of small 14 CO 2 absorption signals (<1 1/s) reduces the technical and operational burdens for cavity-enhanced measurements of radiocarbon, which can benefit a wide range of applications like biomedical research and field-detection of combusted fossil fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Prospective Life Cycle Assessment of Synthetic Graphite Manufactured via Electrochemical Graphitization

Lithium-ion batteries (LIBs) are expected to play a crucial role in meeting many of the clean energy-related goals. Due to its electrical properties such as good conductance, chemical inertness, and corrosion resistance, graphite is a very popular anode for LIBs. Traditional methods of producing battery-grade graphite (high purity >99%) include processing naturally mined graphite or manufacturing synthetic graphite via the Acheson process, which converts soft amorphous carbons such as petroleum coke into graphite by subjecting it to high temperature (up to 3000 °C) for prolonged periods of times (3–5 days). However, due to a lack of abundant high purity natural graphite sources, synthetic graphite is the preferred choice for many LIBs. A new synthetic electrochemical graphitization method that subjects the amorphous carbon precursor submerged in a molten salt mixture to a constant cathodic polarization (against a graphitic anode) has been discovered that has significantly lower graphitization temperatures (~800 °C) and reduced graphitization time (3–6 h). Furthermore, the method can accept a higher variety of carbon precursors compared to the Acheson process. A prospective life cycle assessment (LCA) is conducted on this new method and compared against the traditional processes. The laboratory-scale demonstration of the method is used to build an inventory, which through various assumptions is scaled up to a commercial scale. An additional scenario is also considered with a biomass-derived carbon precursor for the graphite. The results from the LCA show that while the laboratory scale process is similar to the Acheson process and natural flake graphite in terms of impact, the scaled-up process is drastically better than the Acheson process in all environmental categories. Using a coconut shell-derived biomass precursor has a higher impact due to its manufacturing in Indonesia, as the Indonesian energy grid is highly fossil fuel dependent. Therefore, the biomass carbon may have a higher impact than petroleum coke dependent on the location of production of biomass-derived carbon black. The LCA has identified the molten salt—CaCl 2 —as a potential hotspot and suggests other salts should be considered. Accordingly, the new method shows promise in this early stage LCA in improving the environmental performance of graphite (and by relation LIBs) and therefore needs to be explored more in terms of its commercial viability.

25 ENERGY STORAGE↗
DOE OSTI2025

Solvent-Free Dimerization of Isoprene at Ambient Temperature: A Green Route to Biofuel-Range Hydrocarbons

In order to achieve a net-zero carbon footprint by 2050, the global aviation industry must reduce its dependence on fossil fuels. In this regard, there is a global challenge to produce sufficient sustainable aviation fuel (SAF) from renewable sources. Isoprene is an intermediate molecule that can be derived from multiple biomass-based or biosynthetic routes. Here, in this work, we report a green route for the catalytic conversion of isoprene to hydrocarbons that are suitable for aviation fuel. By using an Amberlyst-15 catalyst without metal loading at ambient temperature (19–23 °C), as well as 40 °C, 50 °C, and 60 °C, isoprene was converted into olefinic precursors for SAF and/or blending with conventional aviation fuels. Specifically, at ambient temperature, the process achieved approximately 70 wt % conversion of isoprene with over 50 mol % carbon selectivity toward the aviation fuel range. The resulting SAF-range hydrocarbons were composed of iso-alkenes, branched olefinic monocyclic compounds, and bicyclic compounds, covering a wide range of aviation fuel components. Our work demonstrates, for the first time, the formation of diverse hydrocarbon families for SAF and/or aviation fuel blending at ambient temperature from isoprene.

09 BIOMASS FUELS↗
DOE OSTI2017

Ruthenium Nanoparticle-Decorated Porous Organic Network for Direct Hydrodeoxygenation of Long-Chain Fatty Acids to Alkanes

With the rapidly diminishing fossil fuel resources, development of a new strategy for synthesis of biofuels from renewable resources can provide a sustainable alternative to our energy demand. In this work, we present the design, synthesis, and characterization of a new porous organic network (TpPON) through acid-catalyzed condensation of 1,3,5-triformylphloroglucinol (Tp) and triphenylamine (TPA). Ru 0 nanoparticles are successfully fabricated at the porous surface of TpPON to obtain a novel catalytic system Ru@TpPON, which exhibits excellent catalytic performance together with outstanding stability for the hydrodeoxygenation of various vegetable oils to long-chain alkanes in water, and thus TpPON has wide potential for large-scale biodiesel production from renewable resources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Converting Wind Energy to Ammonia at Lower Pressure

Renewable wind energy can be used to make ammonia. However, wind-generated ammonia costs about twice that made from a traditional fossil-fuel driven process. To reduce the production cost, we replace the conventional ammonia condensation with a selective absorber containing metal halides, e.g., calcium chloride, operating at near synthesis temperatures. With this reaction-absorption process, ammonia can be synthesized at 20 bar from air, water, and wind-generated electricity, with rates comparable to the conventional process running at 150–300 bar. In our reaction-absorption process, the rate of ammonia synthesis is now controlled not by the chemical reaction but largely by the pump used to recycle the unreacted gases. The results suggest an alternative route to distributed ammonia manufacture which can locally supply nitrogen fertilizer and also a method to capture stranded wind energy as a carbon-neutral liquid fuel.

10 SYNTHETIC FUELS↗
DOE OSTI2018

Demand Response Operation of Electricity-Intensive Chemical Processes for Reduced Greenhouse Gas Emissions: Application to an Air Separation Unit

A recent push for reduced greenhouse gas (GHG) emissions has led (in part) to the addition of renewable electricity generation sources to the power generation mix. Renewables such as wind and solar are desynchronized from grid demand, requiring the use of fossil fuels to bridge the gap. We propose a novel production scheduling formulation, emissions-minimizing production (EMP), which utilizes time-based information on the nature of the power generation mix to lower GHG emissions related to the transmission and generation of electricity for industrial users. We demonstrate the application of EMP on a single-column air separation unit. The scheduling problem is cast as a mixed integer linear program that can be solved in a practical amount of time. Extensive numerical studies are used to place EMP in the context of other production scheduling methods (such as demand response), and demonstrate its potential for significant reductions in GHG emissions.

24 POWER TRANSMISSION AND DISTRIBUTION↗