Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLORIDA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

As-Run ATR Physics Evaluation for the UCF-1 HSIS Experiment

This Engineering Calculations and Analysis Report (ECAR) documents the Advanced Test Reactor (ATR) detailed MCNP full core model physics analysis performed to support the irradiation of the University of Central Florida (UCF-1) Hydraulic Shuttle Irradiation System Experiment in the ATR B-7 position. The purpose of this analysis is to calculate: • The as-run neutron and gamma heating rates for the experiment components (W/g); • The as-run DPA for the experiment specimens after 20 (test train 1) and 2 (test train 2) days of irradiation in the ATR B-7 position (neutrons/cm2-sec); • The radionuclide source term after 2 days and 20 days of irradiation in the ATR B-7 position; • The decay heat associated with the UCF-1 radionuclide source term. These calculations were performed using the computer codes MCNP and ORIGEN2. The neutronics model, analysis details, and results are presented in the attached report.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Stereo photogrammetry reveals substantial drag on cloud thermals: STEREO PHOTOGRAMMETRY OF CLOUD THERMALS

Stereo photogrammetry, which uses two synchronized cameras to measure three-dimensional positions, is applied here to ascertain whether drag plays a role in the ascent of cloud thermals. In particular, stereo cameras are used to measure the sizes and speeds of cloud thermals in Florida. Using the vertical momentum equation, it is found that a substantial amount of drag (a drag coefficient on the order of 1) is needed to match both the stereo-photogrammetric data and the known buoyancy of clouds from previous in situ measurements and large-eddy simulations. Empirical data on form drag and theoretical calculations of wave drag reveal that, for the observed Froude numbers of cloud thermals, a drag coefficient of about one is to be expected.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Hybrid Ultra‐Microporous Materials for Selective Xenon Adsorption and Separation

Abstract The demand for Xe/Kr separation continues to grow due to the industrial significance of high‐purity Xe gas. Current separation processes rely on energy intensive cryogenic distillation. Therefore, less energy intensive alternatives, such as physisorptive separation, using porous materials, are required. Herein we show that an underexplored class of porous materials called hybrid ultra‐microporous materials (HUMs) affords new benchmark selectivity for Xe separation from Xe/Kr mixtures. The isostructural materials, CROFOUR‐1‐Ni and CROFOUR‐2‐Ni, are coordination networks that have coordinatively saturated metal centers and two distinct types of micropores, one of which is lined by CrO 4 2− (CROFOUR) anions and the other is decorated by the functionalized organic linker. These nets offer unprecedented selectivity towards Xe. Modelling indicates that the selectivity of these nets is tailored by synergy between the pore size and the strong electrostatics afforded by the CrO 4 2− anions.

Mohamed, Mona H.↗
DOE OSTI2019

Regional techno-economic and life-cycle analysis of the pyrolysis-bioenergy-biochar platform for carbon-negative energy

This study investigates the sensitivity of greenhouse gas (GHG) emissions and the minimum fuel selling price for a 2000 metric ton day –1 integrated pyrolysis–bioenergy–biochar platform with respect to the biorefinery location and biomass types. The regional techno–economic and life–cycle analysis is evaluated in three US counties using representative crops: rice in Glenn County (California), corn in Hamilton County (Iowa), and peanuts in Jackson County (Florida). We evaluate the biochar selling price considering crop yield increases of 0.6%, 2.9%, and 10% after biochar application over 20 years in Glenn County, Hamilton County, and Jackson County, respectively. The biochar prices are calculated under low and high commodity prices to determine upper and lower bounds. Jackson County has the most economically beneficial scenario with an average minimum fuel selling price (MFSP) of 1.55 gal –1 of biofuel produced whereas Hamilton County has the highest average MFSP of 3.82 gal –1 . The life–cycle analysis shows that woody biomass has a strong potential to produce carbon–negative energy compared to grass and straw. As a result, of the 304 cases scenarios considered for this platform, 64% could produce biofuel with negative GHG emissions, which would meet the Renewable Fuel Standard (RFS) target for cellulosic biofuels.

09 BIOMASS FUELS↗
DOE OSTI2021

Prevalence of human papillomavirus genotypes in high-grade cervical precancer and invasive cervical cancer from cancer registries before and after vaccine introduction in the United States

Background. US population-based cancer registries can be used for surveillance of human papillomavirus (HPV) types found in HPV-associated cancers. Using this framework, HPV prevalence among high-grade cervical precancers and invasive cervical cancers were compared before and after HPV vaccine availability. Methods. Archived tissue from 2 studies of cervical precancers and invasive cervical cancers diagnosed from 1993-2005 (prevaccine) were identified from 7 central cancer registries in Florida; Hawaii; Iowa; Kentucky; Louisiana; Los Angeles County, California; and Michigan; from 2014 through 2015 (postvaccine) cases were identified from 3 registries in Iowa, Kentucky, and Louisiana. HPV testing was performed using L1 consensus polymerase chain reaction analysis. HPV-type–specific prevalence was examined grouped by hierarchical attribution to vaccine types: HPV 16, 18, HPV 31, 33, 45, 52, 58, other oncogenic HPV types, and other types/HPV negative. Generalized logit models were used to compare HPV prevalence in the prevaccine study to the postvaccine study by patient age, adjusting for sampling factors. Results. A total of 676 precancers (328 prevaccine and 348 postvaccine) and 1140 invasive cervical cancers (777 prevaccine and 363 postvaccine) were typed. No differences were observed in HPV-type prevalence by patient age between the 2 studies among precancers or invasive cancers. Conclusions. The lack of reduction in vaccine-type prevalence between the 2 studies is likely explained by the low number of cases and low HPV vaccination coverage among women in the postvaccine study. Monitoring HPV-type prevalence through population-based strategies will continue to be important in evaluating the impact of the HPV vaccine.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Detecting population-environmental interactions with mismatched time series data

Time series analysis is an essential method for decomposing the influences of density and exogenous factors such as weather and climate on population regulation. However, there has not been much work focused on understanding how well commonly collected data can reconstruct the effects of environmental factors on population dynamics. We show that, analogous to similar scale issues in spatial data analysis, coarsely sampled temporal data can fail to detect covariate effects when interactions occur on timescales that are fast relative to the survey period. We propose a method for modeling mismatched time series data that couples high-resolution environmental data to low-resolution abundance data. We illustrate our approach with simulations and by applying it to Florida's southern Snail kite population. Our simulation results show that our method can reliably detect linear environmental effects and that detecting nonlinear effects requires high-resolution covariate data even when the population turnover rate is slow. In the Snail kite analysis, our approach performed among the best in a suite of previously used environmental covariates explaining Snail kite dynamics and was able to detect a potential phenological shift in the environmental dependence of Snail kites. Our work provides a statistical framework for reliably detecting population–environment interactions from coarsely surveyed time series. An important implication of this work is that the low predictability of animal population growth by weather variables found in previous studies may be due, in part, to how these data are utilized as covariates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Modeling of the effectiveness of novel edge seal designs for fast, low‐Cap‐Ex manufacturing

Abstract In the manufacturing of photovoltaic (PV) modules, the lamination process can take up to 20 min to complete. In this work, new lamination processes are being developed, and have been prototyped, which hope to be able to cut this time down to as little as 30 s. This could provide significant savings in the cost of lamination equipment, floor space, and energy. PV modules are expected to have a lifespan exceeding 20 to 30 years. For moisture‐sensitive PV technologies, the edge seal between the two layers of glass can be the weakest point of its reliability. There is an inherent challenge when evaluating edge seal materials due to their low permeation rates. As part of Colorado State University's Photovoltaic Research and Development 2, work at the National Renewable Energy Laboratory has developed models to evaluate edge seal configurations in glass‐glass PV modules. Here, this new manufacturing process is evaluated for long‐term moisture durability. Different edge seal design options within glass–glass PV modules are explored. Most of these designs are targeting a superstrate on glass configuration, e.g CdTe, but some designs could be used on conventional crystalline Si cells. Using COMSOL finite element simulation software, we investigated the edge seal and interlayer design configurations containing silicone perimeter edge adhesive, desiccated polyisobutylene‐based edge seal, air, and polyolefin while integrating climate conditions equivalent to a hot and humid environment such as Miami, Florida. We found optimized configurations that will allow the module to prevent moisture ingress over 50 years minimizing the amount of time and material used while utilizing polymers that are easily dispensed.

14 SOLAR ENERGY↗
DOE OSTI2020

Applying cumulative effects to strategically advance large-scale ecosystem restoration

Programs restoring large terrestrial-aquatic ecosystems are expected to increase in area and number over the next decade. Factors ensuring long-term effectiveness at the program scale differ from those at the individual restoration project scale, necessitating a new synthesis. Here we contextualize hydrological, geomorphological, and biological effects of large-scale ecosystem restoration activities within a cumulative-effects paradigm. Evidence of eight modes of cumulative effects benefiting species and ecosystems was elucidated by reviewing restoration efforts in the greater Florida Everglades, Gulf Coast, lower Columbia River and estuary, Puget Sound estuary, Missouri River, northeastern coastal states, San Francisco Bay and Sacramento Delta. Additive and nonlinear cumulative effects of interacting restoration projects propagated across landscape and regional geographic scales, and throughout trophic levels, affecting population structures. Applying a cumulative-effects paradigm to planning, implementing, and evaluating large-scale restoration will avoid countervailing effects and capitalize on positive feedback, advancing evidence-based programs to recover priority species and ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Measurements of Propanal Ignition Delay Times and Species Time Histories Using Shock Tube and Laser Absorption

Propanal is an aldehyde intermediate formed during the hydrocarbon combustion process. Potentially, the use of oxygenated biofuels reduces greenhouse gas emissions; however, it also results in increased toxic aldehyde by-products, mainly formaldehyde, acetaldehyde, acrolein, and propanal. These aldehydes are carcinogenic, and therefore it is important to understand their formation and destruction pathways in combustion systems. In this work, ignition delay times were measured behind reflected shock waves for stoichiometric (Φ = 1) mixtures of propanal (CH 3 CH 2 CHO) and oxygen (O 2 ) in argon bath gas at temperatures of 1129 K < T < 1696 K and pressures around 1 and 6 atm. Measurements were conducted using the kinetics shock tube facility at the University of Central Florida. Current results were compared to available data in the literature as well as to the predictions of three propanal combustion kinetic models: Politecnico di Milano (POLIMI), National University of Ireland at Galway, and McGill mechanisms. In addition, a continuous wave-distributed feedback interband cascade laser centered at 3403.4 nm was used for measuring methane (CH 4 ) and propanal time histories behind the reflected shock waves during propanal pyrolysis. Concentration time histories were obtained at temperatures between 1192 and 1388 K near 1 atm. Sensitivity analysis was carried for both ignition delay time and pyrolysis measurements to reveal the important reactions that were crucial to predicting the current experimental results. Adjustments to the POLIMI mechanism were adopted to better match the experimental data. Further research was suggested for the H abstraction reaction rates of propanal. Finally, in addition to extending the temperature and pressure region of literature ignition delay times, we provide the first high-temperature species concentration time histories during propanal pyrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Degradation in photovoltaic encapsulation strength of attachment: Results of the first PVQAT TG5 artificial weathering study

Delamination of the encapsulant in photovoltaic (PV) module technology results in immediate optical loss and may enable subsequent corrosion or mechanical damage. The effects of artificial weathering were not previously known; therefore, an empirical study was performed to survey the factors most affecting adhesion, including the ultraviolet (UV) source (ie, Xe or fluorescent lamp[s]), the optical filters for the lamp, the chamber temperature, and the relative humidity. Natural weathering was also performed at locations, including the following: Golden, Colorado; Miami, Florida; Phoenix, Arizona; QiongHai, China; Riyadh, Saudi Arabia; and Turpan, China. Specimens were constructed using a laminated glass/poly (ethylene-co-vinyl acetate)/glass geometry. The compressive shear test (CST) was used to quantify the mechanical strength of attachment, taken as a proxy for adhesion. The fractography of select specimens (including cross-sectional optical microscopy) was used to verify the failure mode (delamination or decohesion). Additional analysis of the local solar spectrum as well as the specimen temperature was performed to interpret the results of natural weathering. The goals of this study include to identify the most significant stressors, clarify where strong coupling may occur between stressors, and validate accelerated test results relative to natural weathering. The importance of specimen conditioning (for moisture) and hygrometric degradation as well as the effects of UV degradation are identified in this paper.

14 SOLAR ENERGY↗
DOE OSTI2023

Acceleration Factors for Combined‐Accelerated Stress Testing of Photovoltaic Modules

Combined‐accelerated stress testing (C‐AST) is developed to establish the durability of photovoltaic (PV) products, including for degradation modes that are not a priori known or examined in standardized tests. C‐AST aims to comprehensively represent the sample, stress factors, and their combinations using levels at the statistical tails of the natural environment. Acceleration factors for relevant climate sequences within the C‐AST cycle with respect to the Florida USA climate are estimated for selected degradation mechanisms. It is found that for degradation of the outer backsheet polymer layer, the acceleration factor of the tropical climate sequence (the longest of the climate sequences) is f ( T , G ) = 17.3 with ultraviolet photodegradation; for polyethylene terephthalate hydrolysis (backsheets), f ( T , RH ) = 426; for electrochemical corrosion (PV cell), f ( I ) = 14.1; and for PbSn solder fatigue f (Δ T , r ( T )) = 17.3. Here, T is the module temperature, G is the broadband spectrum irradiance on the plane of array of the module, RH is the relative humidity on the module surface, I is the leakage current through the module packaging, and r ( T ), the number of temperature reversals. The methods discussed herein are generally applicable for evaluating acceleration factors in other accelerated test methods.

14 SOLAR ENERGY↗
DOE OSTI2015

Likelihood of a marine vessel accident from wind energy development in the Atlantic: Likelihood of shipping accident from wind energy in the Atlantic

Offshore wind energy development is planned for areas off the Atlantic coast. Many of the planned wind development areas fall within traditional commercial vessel routes. In order to mitigate possible hazards to ships and to wind turbines, it is important to understand the potential for increased risk to commercial shipping from the presence of wind farms. Using Automatic Identification System (AIS) data, historical shipping routes between ports in the Atlantic were identified, from Maine to the Florida Straits. The AIS data were also used as inputs to a numerical model that can simulate cargo, tanker and tug/towing vessel movement along typical routes. The model was used to recreate present day vessel movement, as well as to simulate future routing that may be required to avoid wind farms. By comparing the present and future routing of vessels, a risk analysis was carried out to determine the increased marginal risk of vessel collisions, groundings, and allisions with stationary objects, due to the presence of wind farms. The outcome of the analysis showed little increase in vessel collisions or allisions, and a decrease in groundings as more vessels were forced seaward by the wind farms.

commercial shipping↗
DOE OSTI2019

Ecosystem services of poplar at long-term phytoremediation sites in the Midwest and Southeast, United States

Short rotation woody crops (SRWCs) including Populus species and their hybrids (i.e., poplars) are ideal for incorporating biomass production with phytotechnologies such as phytoremediation. To integrate these applications, 15 poplar plantings from nine long-term phytoremediation installations were sampled from 2012 to 2013 in the Midwest (Illinois, Iowa, Wisconsin) and Southeast (Alabama, Florida, North Carolina) United States. In this review, we report summary results of this sampling and how performance at each site compared with comparable phytoremediation systems in the literature. We review significant genotypic differences from each planting within the context of provisioning (i.e., biomass production) and regulating (i.e., carbon sequestration) ecosystem services and how they relate to the need for a cleaner environment during times of accelerated ecological degradation. Overall, the contaminated poplar sites provided these ecosystem services comparable to noncontaminated poplar sites used for bioenergy and biofuels feedstock production. For example, phytoremediation trees at the Midwestern sites had biomass values ranging from 4.4 to 15.5 Mg ha –1 y –1 , which was 20% less relative to bioenergy trees (p = .0938). Results were similar for diameter and carbon, with some genotype x environment interactions resulting in phytoremediation trees exhibiting substantially greater growth and productivity (i.e., +131% at one site). As illustrated in the current review, phytoremediation success can be increased with the identification and deployment of genotypes tailored to grow well and tolerate a broad diversity of contaminants (generalists) (i.e., 'DN34', 'NM6', '7300501') versus those that significantly outperform their counterparts under unique site conditions (specialists) (i.e., '220-5', '51-5', 'S13C20').

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Rapid Population Assessment Method for Wild Pigs Using Baited Cameras at 3 Study Sites

ABSTRACT Reliable and efficient population estimates are a critical need for effective management of invasive wild pigs ( Sus scrofa ). We evaluated the use of 10‐day camera grids for rapid population assessment (RPA) of wild pigs at 3 study sites that varied in vegetation communities and wild pig densities. Study areas included Buck Island Ranch, Florida; Tejon Ranch, California; and the Savannah River Site, South Carolina, USA, during 2016–2018. Rapid population assessments grids were composed of baited camera traps spaced approximately 500 or 750 m apart. Two RPA grids were deployed per study site and each grid was deployed twice (4–6 months apart) to assess changes in response to season or population control efforts. We assessed the ability of RPA grids to track population trends, how camera number influenced estimate precision, and how relative abundance indices related to density estimates. We detected changes in occupancy probability, detection probability, and N‐mixture estimates following removal operations and between seasons, but the ability of RPA grids to track population trends was dependent on the statistical method used and number of cameras traps. Increasing the number of cameras traps used in RPA grids increased precision, and these results can be used in determining survey design and estimate choice. We found that estimates of occupancy probability, detection probability, and N‐mixture estimates were positively correlated with spatially explicit capture–recapture density estimates. Thus, these less labor‐intensive estimates from RPA grids showed potential to index the relative abundance of wild pigs in some systems. Our evaluation of RPAs indicates that using study‐specific combinations of statistical method and number of cameras can provide a useful tool for monitoring wild pig presence, tracking population trends, and evaluating the effectiveness of management actions. © 2020 The Wildlife Society.

Schlichting, Peter E.↗
DOE OSTI2020

Coral loss alters guarding and farming behavior of a Caribbean damselfish

Coral loss is a major element of global ecological change in the oceans that may shape the behavior of keystone species such as habitat-attached animals. Farming damselfishes cultivate and aggressively protect algal garden within their territory, thereby shaping local fish assemblages and macro-algae diversity. Following the widespread loss of live branching coral throughout Florida and the Caribbean Sea, dusky damselfish (Stegastes adustus) have modified their territorial behavior. We compared antagonistic behavior, and size and algal species composition of territories of dusky damselfish on dead branching coral rubble and live boulder coral in the Dry Tortugas National Park, USA. Even though similar numbers of “intruders” entered each habitat type, dusky damselfish on rubble territories chased out significantly more fishes, had larger territories and more species of algae were present in their gardens. This study shows that dusky damselfish successfully occupy living and dead coral areas; however, there are potential trade-offs between defending a larger territory and cultivating fewer algal species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Hierarchical sensitivity analysis for simulating barrier island geomorphologic responses to future storms and sea-level rise

This paper presents a new application of an advanced hierarchical sensitivity analysis of a new climate model of barrier island geomorphological evolution. The implemented sensitivity analysis in this study integrates a hierarchical uncertainty framework with a variance-based global sensitivity analysis to decompose the different model input uncertainties. The analysis can provide quantitative and accurate measurements for the relative importance of uncertain model input factors while considering their dependence relationships. The climate model used in this research was the barrier island profile (BIP) model, which is a new computer code developed to simulate barrier island morphological evolution over periods ranging from years to decades under the impacts of accelerated future sea-level rise and long-term changes in the storm climate. In the application of the model, the BIP model was used to evaluate the responses of a series of barrier island cross-sections derived for Santa Rosa Island, Florida, to random storm events and five potential accelerated rates of sea-level rise projected over the next century. The uncertain model input factors thus include the scenario uncertainty caused by alternative future sea-level rise scenarios and the parametric uncertainties of random storm parameters and dune characteristics. The study results reveal that the occurrence of storms is the most important factor for the evolution of sand dunes on the barrier island and the impact of sea-level rise is essential to the morphological change of the island backshore environment. The analysis can provide helpful insights for coastal management and planning. This hierarchical sensitivity analysis is mathematically general and rigorous and can be applied to a wide range of climate models.

Dai, Heng↗
DOE OSTI2018

Science questions and knowledge gaps to study microbial transport and survival in Asian and African dust plumes reaching North America

The Sahara in North Africa and the Gobi and Takla Makan deserts in Asia are the primary sources of mobilized dust in the atmosphere, with regional or global airborne transport estimated at 2 to 5 billion tonnes per year. Annual Asian dust plumes take about 7 to 10 d to cross the Pacific Ocean, and often reach the northwest USA between late February and May. In contrast, the peak season for the movement of African dust storms to the southeastern USA is typically June to August, and dust plumes take about 5 to 7 d to reach Florida. Although studies have documented that a wide range of bacteria, fungi, and viruses in dust plumes reach the USA each year, little is known about temporal and spatial variability in the microbial biodiversity in transoceanic dust plumes, or the effect on the deposition environments. A scoping study (called the Transoceanic Aerobiology Biodiversity Study; TABS) was recently conducted to develop field-based campaigns centered on examining the abundance, diversity, survival, and impact of microorganisms in transoceanic dust plumes arriving in the continental USA from Asia and Africa. This effort identified Science Questions (SQs) and Knowledge Gaps (KGs) that are highly relevant towards an understanding of the microbial diversity, transport, survival and dispersal in transoceanic dusts. Science Questions were defined as broad science topics in transoceanic dust plume microbiology that were underexplored by the aerobiology community. Knowledge Gaps were defined as specific project-level research questions for each SQ that represented important topics in the study of transoceanic aerobiology. Our approach aimed to establish a foundation for future microbiological investigations of Asian and African dust plumes in an international and coordinated manner.

dust aerosol, biological aerosol, microbial aeroso↗
DOE OSTI2024

Mercury bioaccumulation and Hepatozoon spp. infections in two syntopic watersnakes in South Carolina

Mercury (Hg) is a ubiquitous environmental contaminant known to bioaccumulate in biota and biomagnify in food webs. Parasites occur in nearly every ecosystem and often interact in complex ways with other stressors that their hosts experience. Hepatozoon spp. are intraerythrocytic parasites common in snakes. The Florida green watersnake (Nerodia floridana) and the banded watersnake (Nerodia fasciata) occur syntopically in certain aquatic habitats in the Southeastern United States. The purpose of this study was to investigate relationships among total mercury (THg) concentrations, body size, species,habitat type and prevalence and parasitemia of Hepatozoon spp. infections in snakes. In the present study, we sampled N. floridana and N. fasciata from former nuclear cooling reservoirs and isolated wetlands of the Savannah River Site in South Carolina. We used snake tail clips to quantify THg and collected blood samples for hemoparasite counts. Our results indicate a significant, positive relationship between THg and snake body size in N. floridana and N. fasciata in both habitats. Average THg was significantly higher for N. fasciata compared to N. floridana in bays (0.22 ± 0.02 and 0.08 ± 0.006 mg/kg, respectively; p < 0.01), but not in reservoirs (0.17 ± 0.02 and 0.17 ± 0.03 mg/kg, respectively; p = 0.29). Sex did not appear to be related to THg concentration or Hepatozoon spp. infections in either species. In conclusion, we found no association between Hg and Hepatozoon spp. prevalence or parasitemia; however, our results suggest that species and habitat type play a role in susceptibility to Hepatozoon spp. infection.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗